Merge branch 'feature/12v' of ssh://git.mannheim.ccc.de:1337/C3MA/PlantCtrl into feature/12v

# Conflicts:
#	rust/Cargo.toml

.gitignore

@@ -1 +1,12 @@
 *.sch-bak
+PlantCtrlESP32-backups/
+board/production/PlantCtrlESP32_2023-11-08_00-45-35/PlantCtrlESP32.zip
+board/production/PlantCtrlESP32_2023-11-08_00-45-35/netlist.ipc
+.vscode
+.embuild/
+target
+Cargo.lock
+node_modules/
+rust/src/webserver/bundle.js
+rust/build/
+rust/image.bin

README.md

@@ -12,14 +12,15 @@ Open hardware design (powered by KiCAD).
 The complete PCB is stored in the ***board*** sub directory.
 
 There the following components are connected:
-* ESP32 NodeMCU Module (the one of A-Z Delivery was used)
-* Lipo
+* ESP32 **16MB flash required**
+* Lipo monitoring (DS2438)
 * 7 moist sensors
 * 7 pump
 * DC-DC convert (generating voltage from Lipo for pumps)
 * DS18B20 temperature sensors
-* water tank ultrasonic sensor (via HC_SR04)
-* general purpose expansion pin
+* water level via laser distance sensor (VL53L0X)
+* DS2438 battery monitor
+* general purpose expansion pins
 
 # Software
 The firmware for the controller is stored in ***esp32*** sub directory.

board/4435.kicad_mod

@@ -0,0 +1,46 @@
+(footprint "4435" (version 20221018) (generator pcbnew)
+  (layer "F.Cu")
+  (attr smd)
+  (fp_text reference "REF**" (at -3.705 0 90) (layer "F.SilkS")
+      (effects (font (size 1 1) (thickness 0.15)))
+    (tstamp 888d4749-ec8d-48e0-b622-265ef152540e)
+  )
+  (fp_text value "4435" (at 0 0) (layer "F.Fab")
+      (effects (font (size 1 1) (thickness 0.15)))
+    (tstamp 92782e22-8381-4ed1-a11f-ef69c9601af0)
+  )
+  (fp_line (start -2.705 -1.9) (end 2.705 -1.9)
+    (stroke (width 0.12) (type default)) (layer "F.SilkS") (tstamp 3128977c-e0a0-4ca7-8f5b-79eab6c86d44))
+  (fp_line (start -2.705 1.1) (end -2.705 -1.9)
+    (stroke (width 0.12) (type default)) (layer "F.SilkS") (tstamp b5339e6e-bef0-40f8-ac0d-5ffe68b262f3))
+  (fp_line (start -1.905 1.9) (end -2.705 1.1)
+    (stroke (width 0.12) (type default)) (layer "F.SilkS") (tstamp 267dcc87-49da-46db-86da-4ce81b7d2468))
+  (fp_line (start 2.705 -1.9) (end 2.705 1.9)
+    (stroke (width 0.12) (type default)) (layer "F.SilkS") (tstamp 14aaa409-1cdb-4bf6-a811-f0da4dffe73a))
+  (fp_line (start 2.705 1.9) (end -1.905 1.9)
+    (stroke (width 0.12) (type default)) (layer "F.SilkS") (tstamp 1789de97-d192-4375-b67e-3ad05848eee2))
+  (fp_line (start -2.46 -4.85) (end 2.46 -4.85)
+    (stroke (width 0.05) (type default)) (layer "F.CrtYd") (tstamp f4d6fc79-0700-4ee7-b411-e8f033ff66d3))
+  (fp_line (start -2.46 4.85) (end -2.46 -4.85)
+    (stroke (width 0.05) (type default)) (layer "F.CrtYd") (tstamp 3cfe9046-c22e-44b7-8f86-5e90bf2c83b0))
+  (fp_line (start 2.46 -4.85) (end 2.46 4.85)
+    (stroke (width 0.05) (type default)) (layer "F.CrtYd") (tstamp 41eb9d06-d36a-4d1d-a098-b2c48b580c65))
+  (fp_line (start 2.46 4.85) (end -2.46 4.85)
+    (stroke (width 0.05) (type default)) (layer "F.CrtYd") (tstamp 05ce4f60-8c60-4fe2-86da-df65172ffb03))
+  (pad "1" smd rect (at -1.905 -3.5) (size 0.6 2.2) (layers "F.Cu" "F.Paste" "F.Mask")
+    (thermal_bridge_angle 45) (tstamp 239f0d43-7a93-43bf-abef-be78a7aed604))
+  (pad "1" smd rect (at -0.635 -3.5) (size 0.6 2.2) (layers "F.Cu" "F.Paste" "F.Mask")
+    (thermal_bridge_angle 45) (tstamp a9c370b9-178b-48cd-94a4-ca368fb8484d))
+  (pad "1" smd rect (at 0.635 -3.5) (size 0.6 2.2) (layers "F.Cu" "F.Paste" "F.Mask")
+    (thermal_bridge_angle 45) (tstamp 8d506357-8b26-4d9b-b778-52fd40f96071))
+  (pad "1" smd rect (at 1.905 -3.5) (size 0.6 2.2) (layers "F.Cu" "F.Paste" "F.Mask")
+    (thermal_bridge_angle 45) (tstamp 4f4e03c6-0964-4327-a6cb-2e71085bfef0))
+  (pad "2" smd rect (at 1.905 3.5) (size 0.6 2.2) (layers "F.Cu" "F.Paste" "F.Mask")
+    (thermal_bridge_angle 45) (tstamp 3f6b4cbd-12fd-4380-92b9-d204178e6014))
+  (pad "3" smd rect (at -1.905 3.5) (size 0.6 2.2) (layers "F.Cu" "F.Paste" "F.Mask")
+    (thermal_bridge_angle 45) (tstamp bb893791-93a0-4766-9b0e-f175da5df5f4))
+  (pad "3" smd rect (at -0.635 3.5) (size 0.6 2.2) (layers "F.Cu" "F.Paste" "F.Mask")
+    (thermal_bridge_angle 45) (tstamp 8487832e-80f2-4019-9519-9da7cbe24a96))
+  (pad "3" smd rect (at 0.635 3.5) (size 0.6 2.2) (layers "F.Cu" "F.Paste" "F.Mask")
+    (thermal_bridge_angle 45) (tstamp 4ecffbef-d0f1-4d07-af9a-0fb6030dccea))
+)

board/CN3306.kicad_sym

@@ -0,0 +1,82 @@
+(kicad_symbol_lib (version 20220914) (generator kicad_symbol_editor)
+  (symbol "CN3306" (in_bom yes) (on_board yes)
+    (property "Reference" "U" (at 5.08 -5.08 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Value" "" (at 0 0 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Footprint" "" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "Datasheet" "" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (symbol "CN3306_1_1"
+      (rectangle (start -2.54 7.62) (end 12.7 -16.51)
+        (stroke (width 0) (type default))
+        (fill (type background))
+      )
+      (pin input line (at 15.24 -8.89 180) (length 2.54)
+        (name "FB" (effects (font (size 1.27 1.27))))
+        (number "1" (effects (font (size 1.27 1.27))))
+      )
+      (pin input line (at 5.08 10.16 270) (length 2.54)
+        (name "COME" (effects (font (size 1.27 1.27))))
+        (number "10" (effects (font (size 1.27 1.27))))
+      )
+      (pin input line (at 15.24 -13.97 180) (length 2.54)
+        (name "VCC" (effects (font (size 1.27 1.27))))
+        (number "11" (effects (font (size 1.27 1.27))))
+      )
+      (pin input line (at 15.24 -11.43 180) (length 2.54)
+        (name "VCC" (effects (font (size 1.27 1.27))))
+        (number "12" (effects (font (size 1.27 1.27))))
+      )
+      (pin input line (at 15.24 5.08 180) (length 2.54)
+        (name "DRV" (effects (font (size 1.27 1.27))))
+        (number "13" (effects (font (size 1.27 1.27))))
+      )
+      (pin input line (at 3.81 -19.05 90) (length 2.54)
+        (name "GND" (effects (font (size 1.27 1.27))))
+        (number "14" (effects (font (size 1.27 1.27))))
+      )
+      (pin input line (at 6.35 -19.05 90) (length 2.54)
+        (name "GND" (effects (font (size 1.27 1.27))))
+        (number "15" (effects (font (size 1.27 1.27))))
+      )
+      (pin input line (at 15.24 2.54 180) (length 2.54)
+        (name "ISW" (effects (font (size 1.27 1.27))))
+        (number "16" (effects (font (size 1.27 1.27))))
+      )
+      (pin input line (at -5.08 -10.16 0) (length 2.54)
+        (name "COMP" (effects (font (size 1.27 1.27))))
+        (number "2" (effects (font (size 1.27 1.27))))
+      )
+      (pin input line (at -5.08 -1.27 0) (length 2.54)
+        (name "MPPT" (effects (font (size 1.27 1.27))))
+        (number "3" (effects (font (size 1.27 1.27))))
+      )
+      (pin input line (at -5.08 -7.62 0) (length 2.54)
+        (name "SHDN" (effects (font (size 1.27 1.27))))
+        (number "5" (effects (font (size 1.27 1.27))))
+      )
+      (pin input line (at -5.08 3.81 0) (length 2.54)
+        (name "CHRG" (effects (font (size 1.27 1.27))))
+        (number "6" (effects (font (size 1.27 1.27))))
+      )
+      (pin input line (at -5.08 1.27 0) (length 2.54)
+        (name "DONE" (effects (font (size 1.27 1.27))))
+        (number "7" (effects (font (size 1.27 1.27))))
+      )
+      (pin input line (at 15.24 -3.81 180) (length 2.54)
+        (name "CSP" (effects (font (size 1.27 1.27))))
+        (number "8" (effects (font (size 1.27 1.27))))
+      )
+      (pin input line (at 15.24 -6.35 180) (length 2.54)
+        (name "ONE" (effects (font (size 1.27 1.27))))
+        (number "9" (effects (font (size 1.27 1.27))))
+      )
+    )
+  )
+)

board/CN3795.kicad_sym

@@ -0,0 +1,123 @@
+
+(kicad_symbol_lib (version 20211014) (generator kicad_symbol_editor)
+  (symbol "CN3795" (pin_names (offset 1.016)) (in_bom yes) (on_board yes)
+    (property "Reference" "U" (id 0) (at 5.08 18.542 0)
+      (effects (font (size 1.27 1.27)) (justify bottom left))
+    )
+    (property "Value" "CN3795" (id 1) (at 5.08 -20.32 0)
+      (effects (font (size 1.27 1.27)) (justify bottom left))
+    )
+    (property "Footprint" "CN3795:SSOP10" (id 2) (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify bottom) hide)
+    )
+    (property "MF" "Consonance" (id 4) (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify bottom) hide)
+    )
+    (property "Description" "\n4A, Multi-Chemistry Battery Charger\nWith Photovoltaic Cell MPPT Function\n" (id 5) (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify bottom) hide)
+    )
+    (property "Package" "Package" (id 6) (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify bottom) hide)
+    )
+    (property "Price" "None" (id 7) (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify bottom) hide)
+    )
+    (property "SnapEDA_Link" "https://www.snapeda.com/parts/CN3795/Consonance/view-part/?ref=snap" (id 8) (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify bottom) hide)
+    )
+    (property "MP" "CN3795" (id 9) (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify bottom) hide)
+    )
+    (property "Availability" "Not in stock" (id 10) (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify bottom) hide)
+    )
+    (property "Check_prices" "https://www.snapeda.com/parts/CN3795/Consonance/view-part/?ref=eda" (id 11) (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify bottom) hide)
+    )
+    (symbol "CN3795_0_0"
+      (rectangle (start -12.7 -17.78) (end 12.7 17.78)
+        (stroke (width 0.254)) (fill (type background))
+      )
+      (pin bidirectional line (at -15.24 7.62 0) (length 2.54)
+        (name "VCC"
+          (effects (font (size 1.016 1.016)))
+        )
+        (number "9"
+          (effects (font (size 1.016 1.016)))
+        )
+      )
+      (pin bidirectional line (at -15.24 -2.54 0) (length 2.54)
+        (name "~{CHRG}"
+          (effects (font (size 1.016 1.016)))
+        )
+        (number "3"
+          (effects (font (size 1.016 1.016)))
+        )
+      )
+      (pin bidirectional line (at -15.24 -7.62 0) (length 2.54)
+        (name "MPPT"
+          (effects (font (size 1.016 1.016)))
+        )
+        (number "4"
+          (effects (font (size 1.016 1.016)))
+        )
+      )
+      (pin bidirectional line (at -2.54 20.32 270.0) (length 2.54)
+        (name "VG"
+          (effects (font (size 1.016 1.016)))
+        )
+        (number "1"
+          (effects (font (size 1.016 1.016)))
+        )
+      )
+      (pin bidirectional line (at 2.54 20.32 270.0) (length 2.54)
+        (name "DRV"
+          (effects (font (size 1.016 1.016)))
+        )
+        (number "10"
+          (effects (font (size 1.016 1.016)))
+        )
+      )
+      (pin bidirectional line (at 15.24 7.62 180.0) (length 2.54)
+        (name "CSP"
+          (effects (font (size 1.016 1.016)))
+        )
+        (number "8"
+          (effects (font (size 1.016 1.016)))
+        )
+      )
+      (pin bidirectional line (at 15.24 2.54 180.0) (length 2.54)
+        (name "BAT"
+          (effects (font (size 1.016 1.016)))
+        )
+        (number "7"
+          (effects (font (size 1.016 1.016)))
+        )
+      )
+      (pin bidirectional line (at 15.24 -2.54 180.0) (length 2.54)
+        (name "FB"
+          (effects (font (size 1.016 1.016)))
+        )
+        (number "6"
+          (effects (font (size 1.016 1.016)))
+        )
+      )
+      (pin bidirectional line (at 15.24 -7.62 180.0) (length 2.54)
+        (name "COM"
+          (effects (font (size 1.016 1.016)))
+        )
+        (number "5"
+          (effects (font (size 1.016 1.016)))
+        )
+      )
+      (pin bidirectional line (at 0.0 -20.32 90.0) (length 2.54)
+        (name "GND"
+          (effects (font (size 1.016 1.016)))
+        )
+        (number "2"
+          (effects (font (size 1.016 1.016)))
+        )
+      )
+    )
+  )
+)

board/PlantCtrlESP32-rescue.dcm

@@ -0,0 +1,3 @@
+EESchema-DOCLIB  Version 2.0
+#
+#End Doc Library

board/PlantCtrlESP32.erc

@@ -0,0 +1,11 @@
+ERC report (Thu 10 Jun 2021 11:02:23 PM CEST, Encoding UTF8 )
+
+***** Sheet /
+ErrType(3): Pin connected to other pins, but not driven by any pin
+    @(476.25 mm, 236.22 mm): Pin 3 (Power input) of component U6 is not driven (Net 13).
+ErrType(3): Pin connected to other pins, but not driven by any pin
+    @(71.12 mm, 154.94 mm): Pin 4 (Power input) of component U3 is not driven (Net 25).
+ErrType(3): Pin connected to other pins, but not driven by any pin
+    @(558.80 mm, 274.32 mm): Pin 5 (Power input) of component U2 is not driven (Net 28).
+
+ ** ERC messages: 3  Errors 0  Warnings 3

board/PlantCtrlESP32.kicad_prl

@@ -0,0 +1,81 @@
+{
+  "board": {
+    "active_layer": 2,
+    "active_layer_preset": "",
+    "auto_track_width": false,
+    "hidden_netclasses": [],
+    "hidden_nets": [],
+    "high_contrast_mode": 0,
+    "net_color_mode": 1,
+    "opacity": {
+      "images": 0.6,
+      "pads": 1.0,
+      "tracks": 1.0,
+      "vias": 1.0,
+      "zones": 0.6
+    },
+    "ratsnest_display_mode": 0,
+    "selection_filter": {
+      "dimensions": true,
+      "footprints": true,
+      "graphics": true,
+      "keepouts": true,
+      "lockedItems": true,
+      "otherItems": true,
+      "pads": true,
+      "text": true,
+      "tracks": true,
+      "vias": true,
+      "zones": true
+    },
+    "visible_items": [
+      0,
+      1,
+      2,
+      3,
+      4,
+      5,
+      6,
+      7,
+      8,
+      9,
+      10,
+      11,
+      12,
+      13,
+      14,
+      15,
+      16,
+      17,
+      18,
+      19,
+      20,
+      21,
+      22,
+      23,
+      24,
+      25,
+      26,
+      27,
+      28,
+      29,
+      30,
+      32,
+      33,
+      34,
+      35,
+      36,
+      39,
+      40
+    ],
+    "visible_layers": "fffffff_ffffffff",
+    "zone_display_mode": 1
+  },
+  "meta": {
+    "filename": "PlantCtrlESP32.kicad_prl",
+    "version": 3
+  },
+  "project": {
+    "files": []
+  }
+}

board/PlantCtrlESP32.pro

@@ -1,286 +0,0 @@
-update=Fri 27 Nov 2020 08:17:47 PM CET
-version=1
-last_client=kicad
-[general]
-version=1
-RootSch=
-BoardNm=
-[cvpcb]
-version=1
-NetIExt=net
-[eeschema]
-version=1
-LibDir=
-[eeschema/libraries]
-[schematic_editor]
-version=1
-PageLayoutDescrFile=
-PlotDirectoryName=/tmp/
-SubpartIdSeparator=0
-SubpartFirstId=65
-NetFmtName=Pcbnew
-SpiceAjustPassiveValues=0
-LabSize=50
-ERC_TestSimilarLabels=1
-[pcbnew]
-version=1
-PageLayoutDescrFile=
-LastNetListRead=PlantCtrlESP32.net
-CopperLayerCount=2
-BoardThickness=1.6
-AllowMicroVias=0
-AllowBlindVias=0
-RequireCourtyardDefinitions=0
-ProhibitOverlappingCourtyards=1
-MinTrackWidth=0.2
-MinViaDiameter=0.4
-MinViaDrill=0.3
-MinMicroViaDiameter=0.2
-MinMicroViaDrill=0.09999999999999999
-MinHoleToHole=0.25
-TrackWidth1=1.2
-TrackWidth2=0.2
-TrackWidth3=0.5
-TrackWidth4=1
-ViaDiameter1=0.8
-ViaDrill1=0.4
-ViaDiameter2=4
-ViaDrill2=3
-dPairWidth1=0.2
-dPairGap1=0.25
-dPairViaGap1=0.25
-SilkLineWidth=0.12
-SilkTextSizeV=1
-SilkTextSizeH=1
-SilkTextSizeThickness=0.15
-SilkTextItalic=0
-SilkTextUpright=1
-CopperLineWidth=0.2
-CopperTextSizeV=1.5
-CopperTextSizeH=1.5
-CopperTextThickness=0.3
-CopperTextItalic=0
-CopperTextUpright=1
-EdgeCutLineWidth=0.05
-CourtyardLineWidth=0.05
-OthersLineWidth=0.15
-OthersTextSizeV=1
-OthersTextSizeH=1
-OthersTextSizeThickness=0.15
-OthersTextItalic=0
-OthersTextUpright=1
-SolderMaskClearance=0.051
-SolderMaskMinWidth=0.25
-SolderPasteClearance=0
-SolderPasteRatio=-0
-[pcbnew/Layer.F.Cu]
-Name=F.Cu
-Type=0
-Enabled=1
-[pcbnew/Layer.In1.Cu]
-Name=In1.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In2.Cu]
-Name=In2.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In3.Cu]
-Name=In3.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In4.Cu]
-Name=In4.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In5.Cu]
-Name=In5.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In6.Cu]
-Name=In6.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In7.Cu]
-Name=In7.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In8.Cu]
-Name=In8.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In9.Cu]
-Name=In9.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In10.Cu]
-Name=In10.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In11.Cu]
-Name=In11.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In12.Cu]
-Name=In12.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In13.Cu]
-Name=In13.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In14.Cu]
-Name=In14.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In15.Cu]
-Name=In15.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In16.Cu]
-Name=In16.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In17.Cu]
-Name=In17.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In18.Cu]
-Name=In18.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In19.Cu]
-Name=In19.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In20.Cu]
-Name=In20.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In21.Cu]
-Name=In21.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In22.Cu]
-Name=In22.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In23.Cu]
-Name=In23.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In24.Cu]
-Name=In24.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In25.Cu]
-Name=In25.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In26.Cu]
-Name=In26.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In27.Cu]
-Name=In27.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In28.Cu]
-Name=In28.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In29.Cu]
-Name=In29.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.In30.Cu]
-Name=In30.Cu
-Type=0
-Enabled=0
-[pcbnew/Layer.B.Cu]
-Name=B.Cu
-Type=0
-Enabled=1
-[pcbnew/Layer.B.Adhes]
-Enabled=1
-[pcbnew/Layer.F.Adhes]
-Enabled=1
-[pcbnew/Layer.B.Paste]
-Enabled=1
-[pcbnew/Layer.F.Paste]
-Enabled=1
-[pcbnew/Layer.B.SilkS]
-Enabled=1
-[pcbnew/Layer.F.SilkS]
-Enabled=1
-[pcbnew/Layer.B.Mask]
-Enabled=1
-[pcbnew/Layer.F.Mask]
-Enabled=1
-[pcbnew/Layer.Dwgs.User]
-Enabled=1
-[pcbnew/Layer.Cmts.User]
-Enabled=1
-[pcbnew/Layer.Eco1.User]
-Enabled=1
-[pcbnew/Layer.Eco2.User]
-Enabled=1
-[pcbnew/Layer.Edge.Cuts]
-Enabled=1
-[pcbnew/Layer.Margin]
-Enabled=1
-[pcbnew/Layer.B.CrtYd]
-Enabled=1
-[pcbnew/Layer.F.CrtYd]
-Enabled=1
-[pcbnew/Layer.B.Fab]
-Enabled=1
-[pcbnew/Layer.F.Fab]
-Enabled=1
-[pcbnew/Layer.Rescue]
-Enabled=0
-[pcbnew/Netclasses]
-[pcbnew/Netclasses/Default]
-Name=Default
-Clearance=0.2
-TrackWidth=1.2
-ViaDiameter=0.8
-ViaDrill=0.4
-uViaDiameter=0.3
-uViaDrill=0.1
-dPairWidth=0.2
-dPairGap=0.25
-dPairViaGap=0.25
-[pcbnew/Netclasses/1]
-Name=5V
-Clearance=0.2
-TrackWidth=1.4
-ViaDiameter=0.8
-ViaDrill=0.4
-uViaDiameter=0.3
-uViaDrill=0.1
-dPairWidth=0.2
-dPairGap=0.25
-dPairViaGap=0.25
-[pcbnew/Netclasses/2]
-Name=Mini
-Clearance=0.2
-TrackWidth=1
-ViaDiameter=0.8
-ViaDrill=0.4
-uViaDiameter=0.3
-uViaDrill=0.1
-dPairWidth=0.2
-dPairGap=0.25
-dPairViaGap=0.25
-[pcbnew/Netclasses/3]
-Name=Power
-Clearance=0.2
-TrackWidth=1.7
-ViaDiameter=0.8
-ViaDrill=0.4
-uViaDiameter=0.3
-uViaDrill=0.1
-dPairWidth=0.2
-dPairGap=0.25
-dPairViaGap=0.25

board/PlantCtrlESP32.round-tracks-config

@@ -0,0 +1,7 @@
+Default	False	2.0	3
+12V	True	2.0	3
+3V	True	2.0	3
+BAT+	True	2.0	3
+BAT-	True	2.0	3
+GND	True	2.0	3
+False	True	False

board/R_Shunt_Vishay_WSK2512_6332Metric_T1.19mm.kicad_mod

@@ -0,0 +1,63 @@
+(footprint "R_Shunt_Vishay_WSK2512_6332Metric_T1.19mm" (version 20221018) (generator pcbnew)
+  (layer "F.Cu")
+  (descr "Shunt Resistor SMD 2512 (6332 Metric), 2.6mm thick, Vishay WKS2512, Terminal length (T) 1.19mm, 5 to 200 milli Ohm (http://http://www.vishay.com/docs/30108/wsk.pdf)")
+  (tags "resistor shunt WSK2512")
+  (attr smd)
+  (fp_text reference "REF**" (at 0 -2.65) (layer "F.SilkS")
+      (effects (font (size 1 1) (thickness 0.15)))
+    (tstamp e64357ee-67ea-437d-842c-edd4e9b0e817)
+  )
+  (fp_text value "R_Shunt_Vishay_WSK2512_6332Metric_T1.19mm" (at 0 2.65) (layer "F.Fab")
+      (effects (font (size 1 1) (thickness 0.15)))
+    (tstamp 6d43eee8-d677-4710-a5b6-ed0a393d7e86)
+  )
+  (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab")
+      (effects (font (size 1 1) (thickness 0.15)))
+    (tstamp 7af73258-6848-4c90-ada6-9916b21e0d54)
+  )
+  (fp_line (start -2.5 1.7) (end 1.67 1.7)
+    (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 686b0a9f-f303-4b9c-97bc-13b268071b2a))
+  (fp_line (start -1.67 -1.7) (end 2.53 -1.7)
+    (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 8ff3cd0c-2e69-49a7-948e-62e2af1cdeaf))
+  (fp_line (start -4.38 -1.9) (end 4.38 -1.9)
+    (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 97453d6f-90a6-4d0b-9533-4b9de0e70d67))
+  (fp_line (start -4.38 1.9) (end -4.38 -1.9)
+    (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 8d751a64-d963-4d3e-b652-c6367d221a4c))
+  (fp_line (start 4.38 -1.9) (end 4.38 1.9)
+    (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 5fc8cbbe-390d-45f2-b9e2-001b3b36ad53))
+  (fp_line (start 4.38 1.9) (end -4.38 1.9)
+    (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 85ea9322-734e-4f57-b7f4-e08d8559c109))
+  (fp_line (start -3.175 -1.59) (end 3.175 -1.59)
+    (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp a616017c-8c30-4c24-8988-6ebc65a5a14c))
+  (fp_line (start -3.175 0.32) (end -3.175 -1.59)
+    (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 007035a4-df14-4627-b9dd-16c0816e9fc4))
+  (fp_line (start -3.175 0.32) (end -2.795 0.32)
+    (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 7a92ebc4-86fb-494b-8925-1512bf4598dd))
+  (fp_line (start -3.175 0.94) (end -3.175 1.59)
+    (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 8d1ed9db-8b9e-4c9a-b026-a147d8ba5a89))
+  (fp_line (start -3.175 0.94) (end -2.795 0.94)
+    (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 3238b0a3-1bbc-4ecd-9eca-d39a4563f46a))
+  (fp_line (start -2.795 0.94) (end -2.795 0.32)
+    (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 56e7214e-7e65-4896-9919-6dfa6ad242a1))
+  (fp_line (start 2.79 -0.94) (end 3.17 -0.94)
+    (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp bf2fd8b5-dc07-4d36-93f4-c05d760e4ae8))
+  (fp_line (start 2.79 -0.32) (end 2.79 -0.94)
+    (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 2732ea3b-0a68-4014-9f1f-147b192cb827))
+  (fp_line (start 2.79 -0.32) (end 3.17 -0.32)
+    (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 7597632e-0fab-4537-9ef5-3d955ee8fe04))
+  (fp_line (start 3.175 -0.94) (end 3.175 -1.59)
+    (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp be78e59b-9296-4843-849b-9aeaddf3ec90))
+  (fp_line (start 3.175 -0.32) (end 3.175 1.59)
+    (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp f0529fdf-6a96-4afa-ae66-3987676f8cc1))
+  (fp_line (start 3.175 1.59) (end -3.175 1.59)
+    (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 5494f1f1-9934-4901-ae11-4f45356840a6))
+  (pad "1" smd roundrect (at -2.985 0.635) (size 2.29 2.03) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.12) (tstamp 7d665233-6376-4fd3-9d23-184556b0630c))
+  (pad "2" smd roundrect (at -3.43 -1.27) (size 1.4 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.12) (tstamp a060266a-0c38-4364-b2df-6f7cf4c69f0d))
+  (pad "3" smd roundrect (at 3.43 -1.27) (size 1.4 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (tstamp a1e31646-49e8-4836-bd67-1b6bed652414))
+  (pad "4" smd roundrect (at 2.985 0.635) (size 2.29 2.03) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.12) (tstamp 3f532dd2-fd5a-4fe7-9636-aa84f769e3b2))
+  (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_Shunt_Vishay_WSK2512_6332Metric_T1.19mm.wrl"
+    (offset (xyz 0 0 0))
+    (scale (xyz 1 1 1))
+    (rotate (xyz 0 0 0))
+  )
+)

board/fp-lib-table

@@ -1,4 +1,7 @@
-(fp_lib_table
-  (lib (name misc_footprints)(type KiCad)(uri ${KIPRJMOD}/kicad-stuff/misc_footprints-master/misc_footprints.pretty)(options "")(descr ""))
-  (lib (name ESP32)(type KiCad)(uri ${KIPRJMOD}/kicad-stuff/ESP32)(options "")(descr ""))
-)
+(fp_lib_table
+  (version 7)
+  (lib (name "misc_footprints")(type "KiCad")(uri "${KIPRJMOD}/kicad-stuff/misc_footprints-master/misc_footprints.pretty")(options "")(descr ""))
+  (lib (name "ESP32")(type "KiCad")(uri "${KIPRJMOD}/kicad-stuff/ESP32")(options "")(descr ""))
+  (lib (name "kicad-stuff")(type "KiCad")(uri "${KIPRJMOD}/kicad-stuff")(options "")(descr ""))
+  (lib (name "board")(type "KiCad")(uri "${KIPRJMOD}/")(options "")(descr ""))
+)

board/gerber-0.4/PlantCtrlESP32-B_Adhes.gbr

@@ -1,14 +0,0 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(5.1.5)-3*
-G04 #@! TF.CreationDate,2020-11-29T03:44:08+01:00*
-G04 #@! TF.ProjectId,PlantCtrlESP32,506c616e-7443-4747-926c-45535033322e,rev?*
-G04 #@! TF.SameCoordinates,Original*
-G04 #@! TF.FileFunction,Glue,Bot*
-G04 #@! TF.FilePolarity,Positive*
-%FSLAX46Y46*%
-G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (5.1.5)-3) date 2020-11-29 03:44:08*
-%MOMM*%
-%LPD*%
-G04 APERTURE LIST*
-G04 APERTURE END LIST*
-M02*

board/gerber-0.4/PlantCtrlESP32-B_CrtYd.gbr

@@ -1,23 +0,0 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(5.1.5)-3*
-G04 #@! TF.CreationDate,2020-11-29T03:44:09+01:00*
-G04 #@! TF.ProjectId,PlantCtrlESP32,506c616e-7443-4747-926c-45535033322e,rev?*
-G04 #@! TF.SameCoordinates,Original*
-G04 #@! TF.FileFunction,Other,User*
-%FSLAX46Y46*%
-G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (5.1.5)-3) date 2020-11-29 03:44:09*
-%MOMM*%
-%LPD*%
-G04 APERTURE LIST*
-%ADD10C,0.050000*%
-G04 APERTURE END LIST*
-D10*
-X248020000Y-64572000D02*
-X239620000Y-64572000D01*
-X248020000Y-57822000D02*
-X248020000Y-64572000D01*
-X239620000Y-57822000D02*
-X248020000Y-57822000D01*
-X239620000Y-64572000D02*
-X239620000Y-57822000D01*
-M02*

board/gerber-0.4/PlantCtrlESP32-B_Fab.gbr

@@ -1,155 +0,0 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(5.1.5)-3*
-G04 #@! TF.CreationDate,2020-11-29T03:44:09+01:00*
-G04 #@! TF.ProjectId,PlantCtrlESP32,506c616e-7443-4747-926c-45535033322e,rev?*
-G04 #@! TF.SameCoordinates,Original*
-G04 #@! TF.FileFunction,Other,Fab,Bot*
-%FSLAX46Y46*%
-G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (5.1.5)-3) date 2020-11-29 03:44:09*
-%MOMM*%
-%LPD*%
-G04 APERTURE LIST*
-%ADD10C,0.100000*%
-%ADD11C,0.150000*%
-G04 APERTURE END LIST*
-D10*
-X242570000Y-63072000D02*
-X243195000Y-64072000D01*
-X241945000Y-64072000D02*
-X242570000Y-63072000D01*
-X247520000Y-64072000D02*
-X240120000Y-64072000D01*
-X247520000Y-58322000D02*
-X247520000Y-64072000D01*
-X240120000Y-58322000D02*
-X247520000Y-58322000D01*
-X240120000Y-64072000D02*
-X240120000Y-58322000D01*
-D11*
-X247558095Y-57479142D02*
-X247605714Y-57526761D01*
-X247748571Y-57574380D01*
-X247843809Y-57574380D01*
-X247986666Y-57526761D01*
-X248081904Y-57431523D01*
-X248129523Y-57336285D01*
-X248177142Y-57145809D01*
-X248177142Y-57002952D01*
-X248129523Y-56812476D01*
-X248081904Y-56717238D01*
-X247986666Y-56622000D01*
-X247843809Y-56574380D01*
-X247748571Y-56574380D01*
-X247605714Y-56622000D01*
-X247558095Y-56669619D01*
-X246986666Y-57574380D02*
-X247081904Y-57526761D01*
-X247129523Y-57479142D01*
-X247177142Y-57383904D01*
-X247177142Y-57098190D01*
-X247129523Y-57002952D01*
-X247081904Y-56955333D01*
-X246986666Y-56907714D01*
-X246843809Y-56907714D01*
-X246748571Y-56955333D01*
-X246700952Y-57002952D01*
-X246653333Y-57098190D01*
-X246653333Y-57383904D01*
-X246700952Y-57479142D01*
-X246748571Y-57526761D01*
-X246843809Y-57574380D01*
-X246986666Y-57574380D01*
-X246224761Y-56907714D02*
-X246224761Y-57574380D01*
-X246224761Y-57002952D02*
-X246177142Y-56955333D01*
-X246081904Y-56907714D01*
-X245939047Y-56907714D01*
-X245843809Y-56955333D01*
-X245796190Y-57050571D01*
-X245796190Y-57574380D01*
-X245320000Y-56907714D02*
-X245320000Y-57574380D01*
-X245320000Y-57002952D02*
-X245272380Y-56955333D01*
-X245177142Y-56907714D01*
-X245034285Y-56907714D01*
-X244939047Y-56955333D01*
-X244891428Y-57050571D01*
-X244891428Y-57574380D01*
-X244653333Y-57669619D02*
-X243891428Y-57669619D01*
-X243462857Y-56574380D02*
-X243367619Y-56574380D01*
-X243272380Y-56622000D01*
-X243224761Y-56669619D01*
-X243177142Y-56764857D01*
-X243129523Y-56955333D01*
-X243129523Y-57193428D01*
-X243177142Y-57383904D01*
-X243224761Y-57479142D01*
-X243272380Y-57526761D01*
-X243367619Y-57574380D01*
-X243462857Y-57574380D01*
-X243558095Y-57526761D01*
-X243605714Y-57479142D01*
-X243653333Y-57383904D01*
-X243700952Y-57193428D01*
-X243700952Y-56955333D01*
-X243653333Y-56764857D01*
-X243605714Y-56669619D01*
-X243558095Y-56622000D01*
-X243462857Y-56574380D01*
-X242177142Y-57574380D02*
-X242748571Y-57574380D01*
-X242462857Y-57574380D02*
-X242462857Y-56574380D01*
-X242558095Y-56717238D01*
-X242653333Y-56812476D01*
-X242748571Y-56860095D01*
-X241843809Y-57574380D02*
-X241320000Y-56907714D01*
-X241843809Y-56907714D02*
-X241320000Y-57574380D01*
-X240748571Y-56574380D02*
-X240653333Y-56574380D01*
-X240558095Y-56622000D01*
-X240510476Y-56669619D01*
-X240462857Y-56764857D01*
-X240415238Y-56955333D01*
-X240415238Y-57193428D01*
-X240462857Y-57383904D01*
-X240510476Y-57479142D01*
-X240558095Y-57526761D01*
-X240653333Y-57574380D01*
-X240748571Y-57574380D01*
-X240843809Y-57526761D01*
-X240891428Y-57479142D01*
-X240939047Y-57383904D01*
-X240986666Y-57193428D01*
-X240986666Y-56955333D01*
-X240939047Y-56764857D01*
-X240891428Y-56669619D01*
-X240843809Y-56622000D01*
-X240748571Y-56574380D01*
-X240034285Y-56669619D02*
-X239986666Y-56622000D01*
-X239891428Y-56574380D01*
-X239653333Y-56574380D01*
-X239558095Y-56622000D01*
-X239510476Y-56669619D01*
-X239462857Y-56764857D01*
-X239462857Y-56860095D01*
-X239510476Y-57002952D01*
-X240081904Y-57574380D01*
-X239462857Y-57574380D01*
-X244153333Y-58474380D02*
-X244153333Y-59188666D01*
-X244200952Y-59331523D01*
-X244296190Y-59426761D01*
-X244439047Y-59474380D01*
-X244534285Y-59474380D01*
-X243772380Y-58474380D02*
-X243105714Y-58474380D01*
-X243534285Y-59474380D01*
-M02*

board/gerber-0.4/PlantCtrlESP32-B_Paste.gbr

@@ -1,14 +0,0 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(5.1.5)-3*
-G04 #@! TF.CreationDate,2020-11-29T03:44:08+01:00*
-G04 #@! TF.ProjectId,PlantCtrlESP32,506c616e-7443-4747-926c-45535033322e,rev?*
-G04 #@! TF.SameCoordinates,Original*
-G04 #@! TF.FileFunction,Paste,Bot*
-G04 #@! TF.FilePolarity,Positive*
-%FSLAX46Y46*%
-G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (5.1.5)-3) date 2020-11-29 03:44:08*
-%MOMM*%
-%LPD*%
-G04 APERTURE LIST*
-G04 APERTURE END LIST*
-M02*

board/gerber-0.4/PlantCtrlESP32-B_SilkS.gbr

@@ -1,193 +0,0 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(5.1.5)-3*
-G04 #@! TF.CreationDate,2020-11-29T03:44:08+01:00*
-G04 #@! TF.ProjectId,PlantCtrlESP32,506c616e-7443-4747-926c-45535033322e,rev?*
-G04 #@! TF.SameCoordinates,Original*
-G04 #@! TF.FileFunction,Legend,Bot*
-G04 #@! TF.FilePolarity,Positive*
-%FSLAX46Y46*%
-G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (5.1.5)-3) date 2020-11-29 03:44:08*
-%MOMM*%
-%LPD*%
-G04 APERTURE LIST*
-%ADD10C,0.500000*%
-%ADD11C,0.120000*%
-%ADD12C,0.150000*%
-G04 APERTURE END LIST*
-D10*
-X235779314Y-50323523D02*
-X235779314Y-46323523D01*
-X234255504Y-46323523D01*
-X233874552Y-46514000D01*
-X233684076Y-46704476D01*
-X233493600Y-47085428D01*
-X233493600Y-47656857D01*
-X233684076Y-48037809D01*
-X233874552Y-48228285D01*
-X234255504Y-48418761D01*
-X235779314Y-48418761D01*
-X231207885Y-50323523D02*
-X231588838Y-50133047D01*
-X231779314Y-49752095D01*
-X231779314Y-46323523D01*
-X227969790Y-50323523D02*
-X227969790Y-48228285D01*
-X228160266Y-47847333D01*
-X228541219Y-47656857D01*
-X229303123Y-47656857D01*
-X229684076Y-47847333D01*
-X227969790Y-50133047D02*
-X228350742Y-50323523D01*
-X229303123Y-50323523D01*
-X229684076Y-50133047D01*
-X229874552Y-49752095D01*
-X229874552Y-49371142D01*
-X229684076Y-48990190D01*
-X229303123Y-48799714D01*
-X228350742Y-48799714D01*
-X227969790Y-48609238D01*
-X226065028Y-47656857D02*
-X226065028Y-50323523D01*
-X226065028Y-48037809D02*
-X225874552Y-47847333D01*
-X225493600Y-47656857D01*
-X224922171Y-47656857D01*
-X224541219Y-47847333D01*
-X224350742Y-48228285D01*
-X224350742Y-50323523D01*
-X223017409Y-47656857D02*
-X221493600Y-47656857D01*
-X222445980Y-46323523D02*
-X222445980Y-49752095D01*
-X222255504Y-50133047D01*
-X221874552Y-50323523D01*
-X221493600Y-50323523D01*
-X217874552Y-49942571D02*
-X218065028Y-50133047D01*
-X218636457Y-50323523D01*
-X219017409Y-50323523D01*
-X219588838Y-50133047D01*
-X219969790Y-49752095D01*
-X220160266Y-49371142D01*
-X220350742Y-48609238D01*
-X220350742Y-48037809D01*
-X220160266Y-47275904D01*
-X219969790Y-46894952D01*
-X219588838Y-46514000D01*
-X219017409Y-46323523D01*
-X218636457Y-46323523D01*
-X218065028Y-46514000D01*
-X217874552Y-46704476D01*
-X216731695Y-47656857D02*
-X215207885Y-47656857D01*
-X216160266Y-46323523D02*
-X216160266Y-49752095D01*
-X215969790Y-50133047D01*
-X215588838Y-50323523D01*
-X215207885Y-50323523D01*
-X213874552Y-50323523D02*
-X213874552Y-47656857D01*
-X213874552Y-48418761D02*
-X213684076Y-48037809D01*
-X213493600Y-47847333D01*
-X213112647Y-47656857D01*
-X212731695Y-47656857D01*
-X210826933Y-50323523D02*
-X211207885Y-50133047D01*
-X211398361Y-49752095D01*
-X211398361Y-46323523D01*
-X206826933Y-46323523D02*
-X205493600Y-50323523D01*
-X204160266Y-46323523D01*
-X202065028Y-46323523D02*
-X201684076Y-46323523D01*
-X201303123Y-46514000D01*
-X201112647Y-46704476D01*
-X200922171Y-47085428D01*
-X200731695Y-47847333D01*
-X200731695Y-48799714D01*
-X200922171Y-49561619D01*
-X201112647Y-49942571D01*
-X201303123Y-50133047D01*
-X201684076Y-50323523D01*
-X202065028Y-50323523D01*
-X202445980Y-50133047D01*
-X202636457Y-49942571D01*
-X202826933Y-49561619D01*
-X203017409Y-48799714D01*
-X203017409Y-47847333D01*
-X202826933Y-47085428D01*
-X202636457Y-46704476D01*
-X202445980Y-46514000D01*
-X202065028Y-46323523D01*
-X199017409Y-49942571D02*
-X198826933Y-50133047D01*
-X199017409Y-50323523D01*
-X199207885Y-50133047D01*
-X199017409Y-49942571D01*
-X199017409Y-50323523D01*
-X195398361Y-47656857D02*
-X195398361Y-50323523D01*
-X196350742Y-46133047D02*
-X197303123Y-48990190D01*
-X194826933Y-48990190D01*
-D11*
-X239720000Y-64472000D02*
-X239720000Y-63222000D01*
-X240970000Y-64472000D02*
-X239720000Y-64472000D01*
-X246870000Y-58972000D02*
-X243820000Y-58972000D01*
-X246870000Y-61922000D02*
-X246870000Y-58972000D01*
-X247620000Y-61922000D02*
-X246870000Y-61922000D01*
-X240770000Y-58972000D02*
-X243820000Y-58972000D01*
-X240770000Y-61922000D02*
-X240770000Y-58972000D01*
-X240020000Y-61922000D02*
-X240770000Y-61922000D01*
-X247620000Y-64172000D02*
-X245820000Y-64172000D01*
-X247620000Y-63422000D02*
-X247620000Y-64172000D01*
-X245820000Y-63422000D02*
-X247620000Y-63422000D01*
-X245820000Y-64172000D02*
-X245820000Y-63422000D01*
-X241820000Y-64172000D02*
-X240020000Y-64172000D01*
-X241820000Y-63422000D02*
-X241820000Y-64172000D01*
-X240020000Y-63422000D02*
-X241820000Y-63422000D01*
-X240020000Y-64172000D02*
-X240020000Y-63422000D01*
-X244320000Y-64172000D02*
-X243320000Y-64172000D01*
-X244320000Y-63422000D02*
-X244320000Y-64172000D01*
-X243320000Y-63422000D02*
-X244320000Y-63422000D01*
-X243320000Y-64172000D02*
-X243320000Y-63422000D01*
-X247630000Y-64182000D02*
-X240010000Y-64182000D01*
-X247630000Y-58212000D02*
-X247630000Y-64182000D01*
-X240010000Y-58212000D02*
-X247630000Y-58212000D01*
-X240010000Y-64182000D02*
-X240010000Y-58212000D01*
-D12*
-X244153333Y-64724380D02*
-X244153333Y-65438666D01*
-X244200952Y-65581523D01*
-X244296190Y-65676761D01*
-X244439047Y-65724380D01*
-X244534285Y-65724380D01*
-X243772380Y-64724380D02*
-X243105714Y-64724380D01*
-X243534285Y-65724380D01*
-M02*

board/gerber-0.4/PlantCtrlESP32-Cmts_User.gbr

@@ -1,372 +0,0 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(5.1.5)-3*
-G04 #@! TF.CreationDate,2020-11-29T03:44:09+01:00*
-G04 #@! TF.ProjectId,PlantCtrlESP32,506c616e-7443-4747-926c-45535033322e,rev?*
-G04 #@! TF.SameCoordinates,Original*
-G04 #@! TF.FileFunction,Other,Comment*
-%FSLAX46Y46*%
-G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (5.1.5)-3) date 2020-11-29 03:44:09*
-%MOMM*%
-%LPD*%
-G04 APERTURE LIST*
-%ADD10C,0.150000*%
-G04 APERTURE END LIST*
-D10*
-X277589033Y-83880909D02*
-X277638018Y-83927121D01*
-X277688390Y-84020933D01*
-X277695322Y-84258927D01*
-X277650496Y-84355511D01*
-X277604283Y-84404496D01*
-X277510472Y-84454868D01*
-X277415274Y-84457641D01*
-X277271091Y-84414201D01*
-X276683268Y-83859651D01*
-X276701291Y-84478436D01*
-X277725822Y-85306102D02*
-X277720277Y-85115707D01*
-X277669905Y-85021895D01*
-X277620920Y-84975683D01*
-X277475350Y-84884644D01*
-X277283569Y-84842591D01*
-X276902778Y-84853682D01*
-X276808966Y-84904053D01*
-X276762754Y-84953039D01*
-X276717928Y-85049623D01*
-X276723473Y-85240018D01*
-X276773845Y-85333830D01*
-X276822830Y-85380042D01*
-X276919414Y-85424868D01*
-X277157408Y-85417936D01*
-X277251220Y-85367565D01*
-X277297432Y-85318579D01*
-X277342258Y-85221995D01*
-X277336713Y-85031600D01*
-X277286341Y-84937789D01*
-X277237356Y-84891576D01*
-X277140772Y-84846750D01*
-X276836694Y-85856031D02*
-X276790481Y-85905016D01*
-X276741496Y-85858803D01*
-X276787709Y-85809818D01*
-X276836694Y-85856031D01*
-X276741496Y-85858803D01*
-X276770610Y-86858380D02*
-X276753973Y-86287193D01*
-X276762292Y-86572786D02*
-X277761868Y-86543672D01*
-X277616298Y-86452634D01*
-X277518328Y-86360209D01*
-X277467956Y-86266398D01*
-X277779891Y-87162458D02*
-X277799300Y-87828842D01*
-X276787246Y-87429566D01*
-X277807618Y-88114435D02*
-X277825641Y-88733220D01*
-X277435146Y-88411119D01*
-X277439305Y-88553916D01*
-X277394479Y-88650500D01*
-X277348266Y-88699485D01*
-X277254455Y-88749857D01*
-X277016460Y-88756788D01*
-X276919876Y-88711962D01*
-X276870891Y-88665750D01*
-X276820519Y-88571939D01*
-X276812201Y-88286345D01*
-X276857027Y-88189761D01*
-X276903240Y-88140776D01*
-X276860724Y-89952306D02*
-X277527108Y-89932896D01*
-X277431911Y-89935669D02*
-X277480896Y-89981882D01*
-X277531267Y-90075693D01*
-X277535427Y-90218489D01*
-X277490600Y-90315074D01*
-X277396789Y-90365445D01*
-X276873202Y-90380695D01*
-X277396789Y-90365445D02*
-X277493373Y-90410271D01*
-X277543745Y-90504083D01*
-X277547904Y-90646879D01*
-X277503078Y-90743463D01*
-X277409267Y-90793835D01*
-X276885679Y-90809085D01*
-X276899543Y-91285074D02*
-X277565927Y-91265664D01*
-X277470729Y-91268437D02*
-X277519714Y-91314650D01*
-X277570086Y-91408461D01*
-X277574245Y-91551258D01*
-X277529419Y-91647842D01*
-X277435608Y-91698213D01*
-X276912020Y-91713463D01*
-X277435608Y-91698213D02*
-X277532192Y-91743039D01*
-X277582563Y-91836851D01*
-X277586722Y-91979647D01*
-X277541896Y-92076231D01*
-X277448085Y-92126603D01*
-X276924498Y-92141853D01*
-X276339010Y-101154029D02*
-X275577010Y-74992029D01*
-X269748000Y-101346000D02*
-X276925182Y-101136956D01*
-X268986000Y-75184000D02*
-X276163182Y-74974956D01*
-X275577010Y-74992029D02*
-X276195979Y-76100982D01*
-X275577010Y-74992029D02*
-X275023635Y-76135128D01*
-X276339010Y-101154029D02*
-X276892385Y-100010930D01*
-X276339010Y-101154029D02*
-X275720041Y-100045076D01*
-X283091941Y-71405219D02*
-X283084973Y-70929080D01*
-X282608137Y-70888434D01*
-X282656447Y-70935351D01*
-X282705455Y-71029882D01*
-X282708939Y-71267952D01*
-X282662719Y-71363876D01*
-X282615801Y-71412187D01*
-X282521270Y-71461195D01*
-X282283201Y-71464679D01*
-X282187276Y-71418458D01*
-X282138965Y-71371541D01*
-X282089958Y-71277010D01*
-X282086474Y-71038940D01*
-X282132694Y-70943016D01*
-X282179611Y-70894705D01*
-X283002984Y-71835138D02*
-X283051295Y-71882056D01*
-X283100302Y-71976587D01*
-X283103786Y-72214656D01*
-X283057566Y-72310581D01*
-X283010649Y-72358892D01*
-X282916118Y-72407899D01*
-X282820890Y-72409293D01*
-X282677351Y-72363769D01*
-X282097622Y-71800763D01*
-X282106681Y-72419745D01*
-X282208180Y-72846877D02*
-X282161262Y-72895187D01*
-X282112952Y-72848270D01*
-X282159869Y-72799960D01*
-X282208180Y-72846877D01*
-X282112952Y-72848270D01*
-X283122600Y-73500233D02*
-X283123993Y-73595461D01*
-X283077773Y-73691386D01*
-X283030856Y-73739696D01*
-X282936325Y-73788704D01*
-X282746566Y-73839105D01*
-X282508496Y-73842589D01*
-X282317343Y-73797762D01*
-X282221419Y-73751542D01*
-X282173108Y-73704625D01*
-X282124100Y-73610094D01*
-X282122707Y-73514866D01*
-X282168927Y-73418941D01*
-X282215844Y-73370630D01*
-X282310375Y-73321623D01*
-X282500134Y-73271222D01*
-X282738204Y-73267738D01*
-X282929357Y-73312564D01*
-X283025281Y-73358785D01*
-X283073592Y-73405702D01*
-X283122600Y-73500233D01*
-X283132355Y-74166828D02*
-X283142110Y-74833424D01*
-X282135946Y-74419531D01*
-X283153955Y-75642861D02*
-X283151168Y-75452405D01*
-X283102160Y-75357874D01*
-X283053850Y-75310957D01*
-X282909614Y-75217819D01*
-X282718462Y-75172992D01*
-X282337550Y-75178567D01*
-X282243019Y-75227574D01*
-X282196102Y-75275885D01*
-X282149882Y-75371810D01*
-X282152669Y-75562265D01*
-X282201676Y-75656797D01*
-X282249987Y-75703714D01*
-X282345912Y-75749934D01*
-X282583981Y-75746450D01*
-X282678512Y-75697443D01*
-X282725430Y-75649132D01*
-X282771650Y-75553207D01*
-X282768863Y-75362751D01*
-X282719855Y-75268220D01*
-X282671545Y-75221303D01*
-X282575620Y-75175083D01*
-X282172876Y-76943070D02*
-X282839471Y-76933315D01*
-X282744243Y-76934709D02*
-X282792554Y-76981626D01*
-X282841561Y-77076157D01*
-X282843652Y-77218999D01*
-X282797431Y-77314923D01*
-X282702900Y-77363931D01*
-X282179147Y-77371596D01*
-X282702900Y-77363931D02*
-X282798825Y-77410151D01*
-X282847832Y-77504682D01*
-X282849923Y-77647524D01*
-X282803702Y-77743449D01*
-X282709171Y-77792456D01*
-X282185418Y-77800121D01*
-X282192386Y-78276261D02*
-X282858981Y-78266506D01*
-X282763753Y-78267899D02*
-X282812064Y-78314816D01*
-X282861071Y-78409347D01*
-X282863162Y-78552189D01*
-X282816941Y-78648114D01*
-X282722410Y-78697121D01*
-X282198657Y-78704786D01*
-X282722410Y-78697121D02*
-X282818335Y-78743342D01*
-X282867342Y-78837873D01*
-X282869433Y-78980715D01*
-X282823212Y-79076639D01*
-X282728681Y-79125647D01*
-X282204928Y-79133312D01*
-X281678476Y-101085915D02*
-X280916476Y-49015915D01*
-X263906000Y-101346000D02*
-X282264834Y-101077334D01*
-X263144000Y-49276000D02*
-X281502834Y-49007334D01*
-X280916476Y-49015915D02*
-X281519318Y-50133717D01*
-X280916476Y-49015915D02*
-X280346602Y-50150879D01*
-X281678476Y-101085915D02*
-X282248350Y-99950951D01*
-X281678476Y-101085915D02*
-X281075634Y-99968113D01*
-X260308156Y-74045062D02*
-X259736906Y-74059343D01*
-X260022531Y-74052203D02*
-X259997539Y-73052515D01*
-X259905901Y-73197708D01*
-X259813073Y-73295296D01*
-X259719055Y-73345281D01*
-X260902019Y-73029903D02*
-X260997227Y-73027523D01*
-X261093625Y-73072747D01*
-X261142420Y-73119161D01*
-X261192404Y-73213179D01*
-X261244769Y-73402406D01*
-X261250719Y-73640426D01*
-X261207875Y-73832033D01*
-X261162651Y-73928432D01*
-X261116237Y-73977226D01*
-X261022219Y-74027210D01*
-X260927011Y-74029591D01*
-X260830612Y-73984367D01*
-X260781818Y-73937953D01*
-X260731834Y-73843934D01*
-X260679469Y-73654708D01*
-X260673519Y-73416687D01*
-X260716362Y-73225080D01*
-X260761586Y-73128682D01*
-X260808000Y-73079887D01*
-X260902019Y-73029903D01*
-X261686297Y-73915341D02*
-X261735092Y-73961755D01*
-X261688678Y-74010549D01*
-X261639883Y-73964135D01*
-X261686297Y-73915341D01*
-X261688678Y-74010549D01*
-X262688365Y-73985557D02*
-X262117115Y-73999838D01*
-X262402740Y-73992697D02*
-X262377748Y-72993010D01*
-X262286110Y-73138202D01*
-X262193282Y-73235791D01*
-X262099264Y-73285775D01*
-X263520248Y-72964447D02*
-X263329831Y-72969208D01*
-X263235813Y-73019192D01*
-X263189399Y-73067986D01*
-X263097761Y-73213179D01*
-X263054917Y-73404786D01*
-X263064438Y-73785619D01*
-X263114423Y-73879637D01*
-X263163217Y-73926052D01*
-X263259615Y-73971276D01*
-X263450032Y-73966515D01*
-X263544050Y-73916531D01*
-X263590464Y-73867736D01*
-X263635688Y-73771338D01*
-X263629738Y-73533317D01*
-X263579753Y-73439299D01*
-X263530959Y-73392885D01*
-X263434561Y-73347661D01*
-X263244144Y-73352421D01*
-X263150126Y-73402406D01*
-X263103712Y-73451200D01*
-X263058488Y-73547598D01*
-X263948686Y-72953736D02*
-X264567540Y-72938265D01*
-X264243832Y-73327429D01*
-X264386644Y-73323859D01*
-X264483042Y-73369083D01*
-X264531837Y-73415497D01*
-X264581821Y-73509515D01*
-X264587772Y-73747536D01*
-X264542548Y-73843934D01*
-X264496134Y-73892729D01*
-X264402115Y-73942713D01*
-X264116490Y-73949854D01*
-X264020092Y-73904630D01*
-X263971298Y-73858216D01*
-X265782636Y-73908200D02*
-X265765975Y-73241742D01*
-X265768355Y-73336950D02*
-X265814769Y-73288156D01*
-X265908787Y-73238171D01*
-X266051600Y-73234601D01*
-X266147998Y-73279825D01*
-X266197983Y-73373843D01*
-X266211074Y-73897489D01*
-X266197983Y-73373843D02*
-X266243207Y-73277445D01*
-X266337225Y-73227460D01*
-X266480038Y-73223890D01*
-X266576436Y-73269114D01*
-X266626420Y-73363132D01*
-X266639512Y-73886778D01*
-X267115553Y-73874877D02*
-X267098892Y-73208419D01*
-X267101272Y-73303627D02*
-X267147686Y-73254833D01*
-X267241704Y-73204848D01*
-X267384517Y-73201278D01*
-X267480915Y-73246502D01*
-X267530900Y-73340520D01*
-X267543991Y-73864166D01*
-X267530900Y-73340520D02*
-X267576124Y-73244122D01*
-X267670142Y-73194137D01*
-X267812954Y-73190567D01*
-X267909353Y-73235791D01*
-X267959337Y-73329809D01*
-X267972428Y-73853455D01*
-X268979654Y-74676159D02*
-X258819654Y-74930159D01*
-X269240000Y-85090000D02*
-X268964998Y-74089921D01*
-X259080000Y-85344000D02*
-X258804998Y-74343921D01*
-X258819654Y-74930159D02*
-X259931150Y-74315768D01*
-X258819654Y-74930159D02*
-X259960462Y-75488243D01*
-X268979654Y-74676159D02*
-X267838846Y-74118075D01*
-X268979654Y-74676159D02*
-X267868158Y-75290550D01*
-M02*

board/gerber-0.4/PlantCtrlESP32-Dwgs_User.gbr

@@ -1,13 +0,0 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(5.1.5)-3*
-G04 #@! TF.CreationDate,2020-11-29T03:44:09+01:00*
-G04 #@! TF.ProjectId,PlantCtrlESP32,506c616e-7443-4747-926c-45535033322e,rev?*
-G04 #@! TF.SameCoordinates,Original*
-G04 #@! TF.FileFunction,OtherDrawing,Comment*
-%FSLAX46Y46*%
-G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (5.1.5)-3) date 2020-11-29 03:44:09*
-%MOMM*%
-%LPD*%
-G04 APERTURE LIST*
-G04 APERTURE END LIST*
-M02*

board/gerber-0.4/PlantCtrlESP32-Eco1_User.gbr

@@ -1,13 +0,0 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(5.1.5)-3*
-G04 #@! TF.CreationDate,2020-11-29T03:44:09+01:00*
-G04 #@! TF.ProjectId,PlantCtrlESP32,506c616e-7443-4747-926c-45535033322e,rev?*
-G04 #@! TF.SameCoordinates,Original*
-G04 #@! TF.FileFunction,Other,ECO1*
-%FSLAX46Y46*%
-G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (5.1.5)-3) date 2020-11-29 03:44:09*
-%MOMM*%
-%LPD*%
-G04 APERTURE LIST*
-G04 APERTURE END LIST*
-M02*

board/gerber-0.4/PlantCtrlESP32-Eco2_User.gbr

@@ -1,13 +0,0 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(5.1.5)-3*
-G04 #@! TF.CreationDate,2020-11-29T03:44:09+01:00*
-G04 #@! TF.ProjectId,PlantCtrlESP32,506c616e-7443-4747-926c-45535033322e,rev?*
-G04 #@! TF.SameCoordinates,Original*
-G04 #@! TF.FileFunction,Other,ECO2*
-%FSLAX46Y46*%
-G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (5.1.5)-3) date 2020-11-29 03:44:09*
-%MOMM*%
-%LPD*%
-G04 APERTURE LIST*
-G04 APERTURE END LIST*
-M02*

board/gerber-0.4/PlantCtrlESP32-Edge_Cuts.gbr

@@ -1,25 +0,0 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(5.1.5)-3*
-G04 #@! TF.CreationDate,2020-11-29T03:44:09+01:00*
-G04 #@! TF.ProjectId,PlantCtrlESP32,506c616e-7443-4747-926c-45535033322e,rev?*
-G04 #@! TF.SameCoordinates,Original*
-G04 #@! TF.FileFunction,Profile,NP*
-%FSLAX46Y46*%
-G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (5.1.5)-3) date 2020-11-29 03:44:09*
-%MOMM*%
-%LPD*%
-G04 APERTURE LIST*
-%ADD10C,0.050000*%
-G04 APERTURE END LIST*
-D10*
-X170180000Y-40640000D02*
-X269240000Y-40640000D01*
-X170180000Y-43180000D02*
-X170180000Y-40640000D01*
-X170180000Y-139700000D02*
-X170180000Y-43180000D01*
-X269240000Y-139700000D02*
-X269240000Y-40640000D01*
-X170180000Y-139700000D02*
-X269240000Y-139700000D01*
-M02*

board/gerber-0.4/PlantCtrlESP32-F_Adhes.gbr

@@ -1,14 +0,0 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(5.1.5)-3*
-G04 #@! TF.CreationDate,2020-11-29T03:44:08+01:00*
-G04 #@! TF.ProjectId,PlantCtrlESP32,506c616e-7443-4747-926c-45535033322e,rev?*
-G04 #@! TF.SameCoordinates,Original*
-G04 #@! TF.FileFunction,Glue,Top*
-G04 #@! TF.FilePolarity,Positive*
-%FSLAX46Y46*%
-G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (5.1.5)-3) date 2020-11-29 03:44:08*
-%MOMM*%
-%LPD*%
-G04 APERTURE LIST*
-G04 APERTURE END LIST*
-M02*

board/gerber-0.4/PlantCtrlESP32-Margin.gbr

@@ -1,13 +0,0 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(5.1.5)-3*
-G04 #@! TF.CreationDate,2020-11-29T03:44:09+01:00*
-G04 #@! TF.ProjectId,PlantCtrlESP32,506c616e-7443-4747-926c-45535033322e,rev?*
-G04 #@! TF.SameCoordinates,Original*
-G04 #@! TF.FileFunction,Other,User*
-%FSLAX46Y46*%
-G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW (5.1.5)-3) date 2020-11-29 03:44:09*
-%MOMM*%
-%LPD*%
-G04 APERTURE LIST*
-G04 APERTURE END LIST*
-M02*

board/gerber-0.4/PlantCtrlESP32-NPTH.drl

@@ -1,20 +0,0 @@
-M48
-; DRILL file {KiCad (5.1.5)-3} date 11/29/20 03:44:10
-; FORMAT={-:-/ absolute / metric / decimal}
-; #@! TF.CreationDate,2020-11-29T03:44:10+01:00
-; #@! TF.GenerationSoftware,Kicad,Pcbnew,(5.1.5)-3
-; #@! TF.FileFunction,NonPlated,1,2,NPTH
-FMAT,2
-METRIC
-T1C2.390
-T2C3.450
-%
-G90
-G05
-T1
-X251.83Y-62.61
-T2
-X188.3Y-62.61
-X243.5Y-46.61
-T0
-M30

board/gerber-0.4/PlantCtrlESP32-PTH.drl

@@ -1,200 +0,0 @@
-M48
-; DRILL file {KiCad (5.1.5)-3} date 11/29/20 03:44:10
-; FORMAT={-:-/ absolute / metric / decimal}
-; #@! TF.CreationDate,2020-11-29T03:44:10+01:00
-; #@! TF.GenerationSoftware,Kicad,Pcbnew,(5.1.5)-3
-; #@! TF.FileFunction,Plated,1,2,PTH
-FMAT,2
-METRIC
-T1C0.400
-T2C0.750
-T3C0.950
-T4C1.000
-T5C1.040
-T6C2.000
-T7C3.000
-%
-G90
-G05
-T1
-X171.45Y-77.724
-X175.26Y-76.454
-X176.276Y-66.548
-X176.784Y-59.944
-X184.404Y-99.568
-X185.42Y-122.428
-X187.706Y-122.428
-X188.976Y-95.504
-X188.976Y-98.552
-X189.794Y-80.208
-X189.992Y-122.428
-X191.008Y-54.61
-X191.262Y-66.548
-X192.024Y-99.822
-X192.278Y-88.9
-X192.278Y-122.428
-X194.564Y-122.428
-X195.834Y-77.47
-X196.85Y-122.428
-X196.88Y-78.77
-X197.612Y-135.636
-X199.136Y-122.428
-X200.214Y-128.016
-X200.914Y-129.286
-X201.93Y-127.0
-X202.438Y-98.044
-X208.28Y-65.024
-X210.12Y-102.616
-X210.82Y-104.14
-X211.455Y-59.817
-X212.32Y-85.598
-X212.344Y-87.122
-X213.106Y-92.202
-X214.122Y-54.356
-X216.916Y-98.044
-X220.284Y-92.268
-X221.234Y-54.61
-X224.282Y-98.044
-X226.822Y-85.09
-X227.396Y-92.268
-X227.584Y-87.376
-X231.902Y-98.044
-X235.016Y-92.268
-X235.204Y-87.63
-X236.474Y-80.01
-X237.38Y-76.344
-X239.776Y-98.044
-X241.3Y-87.122
-X242.25Y-92.268
-X242.316Y-83.058
-X247.396Y-98.044
-X250.886Y-92.268
-X255.27Y-98.044
-X257.744Y-92.268
-X262.636Y-98.044
-X263.398Y-59.436
-T2
-X215.138Y-41.783
-X216.408Y-41.783
-X217.678Y-41.783
-T3
-X237.49Y-124.54
-X237.49Y-127.04
-X237.49Y-129.54
-X214.63Y-124.54
-X214.63Y-127.04
-X214.63Y-129.54
-X252.73Y-124.54
-X252.73Y-127.04
-X252.73Y-129.54
-X173.99Y-101.6
-X173.99Y-104.1
-X173.99Y-106.6
-X245.11Y-124.54
-X245.11Y-127.04
-X245.11Y-129.54
-X173.99Y-86.36
-X173.99Y-88.86
-X173.99Y-91.36
-X173.99Y-93.86
-X173.736Y-113.792
-X173.736Y-116.292
-X173.736Y-118.792
-X229.87Y-124.54
-X229.87Y-127.04
-X229.87Y-129.54
-X260.35Y-124.54
-X260.35Y-127.04
-X260.35Y-129.54
-X222.25Y-124.54
-X222.25Y-127.04
-X222.25Y-129.54
-T4
-X214.63Y-110.53
-X214.63Y-113.03
-X229.87Y-110.53
-X229.87Y-113.03
-X259.842Y-71.374
-X259.842Y-73.914
-X259.842Y-76.454
-X259.842Y-78.994
-X237.49Y-110.53
-X237.49Y-113.03
-X238.76Y-67.564
-X241.3Y-67.564
-X243.84Y-67.564
-X246.38Y-67.564
-X186.055Y-133.985
-X188.595Y-133.985
-X191.135Y-133.985
-X193.675Y-133.985
-X222.25Y-110.53
-X222.25Y-113.03
-X252.73Y-110.53
-X252.73Y-113.03
-X242.57Y-61.722
-X245.07Y-61.722
-X245.11Y-110.53
-X245.11Y-113.03
-X260.35Y-110.53
-X260.35Y-113.03
-T5
-X179.705Y-74.855
-X179.705Y-77.395
-X179.705Y-79.935
-X179.705Y-82.475
-X179.705Y-85.015
-X179.705Y-87.555
-X179.705Y-90.095
-X179.705Y-92.635
-X179.705Y-95.175
-X179.705Y-97.715
-X179.705Y-100.255
-X179.705Y-102.795
-X179.705Y-105.335
-X179.705Y-107.875
-X179.705Y-110.415
-X179.705Y-112.955
-X179.705Y-115.495
-X179.705Y-118.035
-X179.705Y-120.575
-X205.105Y-74.855
-X205.105Y-77.395
-X205.105Y-79.935
-X205.105Y-82.475
-X205.105Y-85.015
-X205.105Y-87.555
-X205.105Y-90.095
-X205.105Y-92.635
-X205.105Y-95.175
-X205.105Y-97.715
-X205.105Y-100.255
-X205.105Y-102.795
-X205.105Y-105.335
-X205.105Y-107.875
-X205.105Y-110.415
-X205.105Y-112.955
-X205.105Y-115.495
-X205.105Y-118.035
-X205.105Y-120.575
-T6
-X176.57Y-54.61
-X255.23Y-54.61
-T7
-X173.99Y-44.45
-X173.99Y-135.636
-X265.43Y-44.45
-X265.43Y-135.636
-T6
-G00X252.73Y-74.234
-M15
-G01X252.73Y-70.234
-M16
-G05
-G00X252.73Y-83.534
-M15
-G01X252.73Y-79.534
-M16
-G05
-T0
-M30

board/kicad-stuff/BQ34Z100PWR-G1.kicad_sym

@@ -0,0 +1,158 @@
+
+(kicad_symbol_lib (version 20211014) (generator kicad_symbol_editor)
+  (symbol "BQ34Z100PWR-G1" (pin_names (offset 1.016)) (in_bom yes) (on_board yes)
+    (property "Reference" "U" (id 0) (at -12.7 26.4 0.0)
+      (effects (font (size 1.27 1.27)) (justify bottom left))
+    )
+    (property "Value" "BQ34Z100PWR-G1" (id 1) (at -12.7 -29.4 0.0)
+      (effects (font (size 1.27 1.27)) (justify bottom left))
+    )
+    (property "Footprint" "BQ34Z100PWR-G1:SOP65P640X120-14N" (id 2) (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify bottom) hide)
+    )
+    (property "MF" "Texas Instruments" (id 4) (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify bottom) hide)
+    )
+    (property "Description" "\nMulti-chemistry Impedance Track™ standalone fuel gauge | battery gas gauge\n" (id 5) (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify bottom) hide)
+    )
+    (property "Package" "TSSOP-14 Texas Instruments" (id 6) (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify bottom) hide)
+    )
+    (property "Price" "None" (id 7) (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify bottom) hide)
+    )
+    (property "SnapEDA_Link" "https://www.snapeda.com/parts/BQ34Z100PWR-G1/Texas+Instruments/view-part/?ref=snap" (id 8) (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify bottom) hide)
+    )
+    (property "MP" "BQ34Z100PWR-G1" (id 9) (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify bottom) hide)
+    )
+    (property "Purchase-URL" "https://www.snapeda.com/api/url_track_click_mouser/?unipart_id=327977&manufacturer=Texas Instruments&part_name=BQ34Z100PWR-G1&search_term=None" (id 10) (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify bottom) hide)
+    )
+    (property "Availability" "In Stock" (id 11) (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify bottom) hide)
+    )
+    (property "Check_prices" "https://www.snapeda.com/parts/BQ34Z100PWR-G1/Texas+Instruments/view-part/?ref=eda" (id 12) (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify bottom) hide)
+    )
+    (symbol "BQ34Z100PWR-G1_0_0"
+      (rectangle (start -12.7 -25.4) (end 12.7 25.4)
+        (stroke (width 0.41)) (fill (type background))
+      )
+      (pin input line (at -17.78 22.86 0) (length 5.08)
+        (name "REGIN"
+          (effects (font (size 1.016 1.016)))
+        )
+        (number "6"
+          (effects (font (size 1.016 1.016)))
+        )
+      )
+      (pin bidirectional line (at -17.78 17.78 0) (length 5.08)
+        (name "BAT"
+          (effects (font (size 1.016 1.016)))
+        )
+        (number "4"
+          (effects (font (size 1.016 1.016)))
+        )
+      )
+      (pin bidirectional line (at -17.78 12.7 0) (length 5.08)
+        (name "CE"
+          (effects (font (size 1.016 1.016)))
+        )
+        (number "5"
+          (effects (font (size 1.016 1.016)))
+        )
+      )
+      (pin bidirectional line (at -17.78 7.62 0) (length 5.08)
+        (name "P1"
+          (effects (font (size 1.016 1.016)))
+        )
+        (number "3"
+          (effects (font (size 1.016 1.016)))
+        )
+      )
+      (pin bidirectional line (at -17.78 5.08 0) (length 5.08)
+        (name "P2"
+          (effects (font (size 1.016 1.016)))
+        )
+        (number "1"
+          (effects (font (size 1.016 1.016)))
+        )
+      )
+      (pin bidirectional line (at -17.78 2.54 0) (length 5.08)
+        (name "P3/SDA"
+          (effects (font (size 1.016 1.016)))
+        )
+        (number "14"
+          (effects (font (size 1.016 1.016)))
+        )
+      )
+      (pin bidirectional line (at -17.78 -2.54 0) (length 5.08)
+        (name "REG25"
+          (effects (font (size 1.016 1.016)))
+        )
+        (number "7"
+          (effects (font (size 1.016 1.016)))
+        )
+      )
+      (pin bidirectional line (at -17.78 -7.62 0) (length 5.08)
+        (name "SRN"
+          (effects (font (size 1.016 1.016)))
+        )
+        (number "10"
+          (effects (font (size 1.016 1.016)))
+        )
+      )
+      (pin bidirectional line (at -17.78 -12.7 0) (length 5.08)
+        (name "SRP"
+          (effects (font (size 1.016 1.016)))
+        )
+        (number "9"
+          (effects (font (size 1.016 1.016)))
+        )
+      )
+      (pin bidirectional line (at -17.78 -17.78 0) (length 5.08)
+        (name "VEN"
+          (effects (font (size 1.016 1.016)))
+        )
+        (number "2"
+          (effects (font (size 1.016 1.016)))
+        )
+      )
+      (pin bidirectional line (at 17.78 5.08 180.0) (length 5.08)
+        (name "P4/SCL"
+          (effects (font (size 1.016 1.016)))
+        )
+        (number "13"
+          (effects (font (size 1.016 1.016)))
+        )
+      )
+      (pin bidirectional line (at 17.78 2.54 180.0) (length 5.08)
+        (name "P5/HDQ"
+          (effects (font (size 1.016 1.016)))
+        )
+        (number "12"
+          (effects (font (size 1.016 1.016)))
+        )
+      )
+      (pin bidirectional line (at 17.78 1.77636e-15 180.0) (length 5.08)
+        (name "P6/TS"
+          (effects (font (size 1.016 1.016)))
+        )
+        (number "11"
+          (effects (font (size 1.016 1.016)))
+        )
+      )
+      (pin power_in line (at 17.78 -20.32 180.0) (length 5.08)
+        (name "VSS"
+          (effects (font (size 1.016 1.016)))
+        )
+        (number "8"
+          (effects (font (size 1.016 1.016)))
+        )
+      )
+    )
+  )
+)

board/kicad-stuff/DW01.dcm

@@ -1,3 +1,9 @@
 EESchema-DOCLIB  Version 2.0
 #
+$CMP CN61CN33
+D Microprocessor Reset (active-low) Circuit, SOT-23
+K reset supervisor
+F http://www.ti.com/lit/ds/symlink/lm809.pdf
+$ENDCMP
+#
 #End Doc Library

board/kicad-stuff/DW01.kicad_sym

@@ -0,0 +1,186 @@
+(kicad_symbol_lib (version 20220914) (generator kicad_symbol_editor)
+  (symbol "CN61CN33" (in_bom yes) (on_board yes)
+    (property "Reference" "U" (at 2.54 12.7 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Value" "CN61CN33" (at 5.08 10.16 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Footprint" "Package_TO_SOT_SMD:SOT-23" (at 7.62 2.54 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "Datasheet" "http://www.ti.com/lit/ds/symlink/lm809.pdf" (at 7.62 2.54 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "ki_keywords" "reset supervisor" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "ki_description" "Microprocessor Reset (active-low) Circuit, SOT-23" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "ki_fp_filters" "SOT?23*" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (symbol "CN61CN33_0_1"
+      (rectangle (start 5.08 7.62) (end -5.08 -7.62)
+        (stroke (width 0.254) (type solid))
+        (fill (type background))
+      )
+    )
+    (symbol "CN61CN33_1_1"
+      (pin output line (at 0 -10.16 90) (length 2.54)
+        (name "RESET" (effects (font (size 1.27 1.27))))
+        (number "1" (effects (font (size 1.27 1.27))))
+      )
+      (pin power_in line (at 7.62 0 180) (length 2.54)
+        (name "GND" (effects (font (size 1.27 1.27))))
+        (number "2" (effects (font (size 1.27 1.27))))
+      )
+      (pin power_in line (at 0 10.16 270) (length 2.54)
+        (name "VCC" (effects (font (size 1.27 1.27))))
+        (number "3" (effects (font (size 1.27 1.27))))
+      )
+    )
+  )
+  (symbol "DS2438" (pin_names (offset 1.016)) (in_bom yes) (on_board yes)
+    (property "Reference" "U" (at 0 0 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Value" "DS2438" (at 0 0 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Footprint" "" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "Datasheet" "" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (symbol "DS2438_0_1"
+      (rectangle (start -11.43 -2.54) (end 12.7 -30.48)
+        (stroke (width 0) (type solid))
+        (fill (type background))
+      )
+    )
+    (symbol "DS2438_1_1"
+      (pin power_in line (at -13.97 -6.35 0) (length 2.54)
+        (name "GND" (effects (font (size 1.27 1.27))))
+        (number "1" (effects (font (size 1.27 1.27))))
+      )
+      (pin unspecified line (at -13.97 -12.7 0) (length 2.54)
+        (name "Vsens+" (effects (font (size 1.27 1.27))))
+        (number "2" (effects (font (size 1.27 1.27))))
+      )
+      (pin unspecified line (at -13.97 -19.05 0) (length 2.54)
+        (name "Vsense-" (effects (font (size 1.27 1.27))))
+        (number "3" (effects (font (size 1.27 1.27))))
+      )
+      (pin input line (at -13.97 -25.4 0) (length 2.54)
+        (name "Vad" (effects (font (size 1.27 1.27))))
+        (number "4" (effects (font (size 1.27 1.27))))
+      )
+      (pin power_in line (at 15.24 -25.4 180) (length 2.54)
+        (name "Vdd" (effects (font (size 1.27 1.27))))
+        (number "5" (effects (font (size 1.27 1.27))))
+      )
+      (pin unspecified line (at 15.24 -19.05 180) (length 2.54)
+        (name "NC" (effects (font (size 1.27 1.27))))
+        (number "6" (effects (font (size 1.27 1.27))))
+      )
+      (pin unspecified line (at 15.24 -12.7 180) (length 2.54)
+        (name "NC" (effects (font (size 1.27 1.27))))
+        (number "7" (effects (font (size 1.27 1.27))))
+      )
+      (pin bidirectional line (at 15.24 -6.35 180) (length 2.54)
+        (name "DQ" (effects (font (size 1.27 1.27))))
+        (number "8" (effects (font (size 1.27 1.27))))
+      )
+    )
+  )
+  (symbol "DW01" (pin_names (offset 1.016)) (in_bom yes) (on_board yes)
+    (property "Reference" "IC" (at 21.59 7.62 0)
+      (effects (font (size 1.27 1.27)) (justify left bottom))
+    )
+    (property "Value" "DW01" (at 21.59 5.08 0)
+      (effects (font (size 1.27 1.27)) (justify left bottom))
+    )
+    (property "Footprint" "SOT95P280X135-6N" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify left bottom) hide)
+    )
+    (property "Datasheet" "" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify left bottom) hide)
+    )
+    (property "HEIGHT" "1.35mm" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify left bottom) hide)
+    )
+    (property "DESCRIPTION" "ic" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify left bottom) hide)
+    )
+    (property "MANUFACTURER_PART_NUMBER" "DW01" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify left bottom) hide)
+    )
+    (property "MANUFACTURER_NAME" "Slkor" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify left bottom) hide)
+    )
+    (property "ki_locked" "" (at 0 0 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (symbol "DW01_0_0"
+      (polyline
+        (pts
+          (xy 5.08 2.54)
+          (xy 5.08 -7.62)
+        )
+        (stroke (width 0.254) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy 5.08 2.54)
+          (xy 20.32 2.54)
+        )
+        (stroke (width 0.254) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy 20.32 -7.62)
+          (xy 5.08 -7.62)
+        )
+        (stroke (width 0.254) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy 20.32 -7.62)
+          (xy 20.32 2.54)
+        )
+        (stroke (width 0.254) (type solid))
+        (fill (type none))
+      )
+      (pin bidirectional line (at 0 0 0) (length 5.08)
+        (name "OD" (effects (font (size 1.016 1.016))))
+        (number "1" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at 0 -2.54 0) (length 5.08)
+        (name "CSI" (effects (font (size 1.016 1.016))))
+        (number "2" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at 0 -5.08 0) (length 5.08)
+        (name "OC" (effects (font (size 1.016 1.016))))
+        (number "3" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at 25.4 -5.08 180) (length 5.08)
+        (name "TD" (effects (font (size 1.016 1.016))))
+        (number "4" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at 25.4 -2.54 180) (length 5.08)
+        (name "VDD" (effects (font (size 1.016 1.016))))
+        (number "5" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at 25.4 0 180) (length 5.08)
+        (name "VSS" (effects (font (size 1.016 1.016))))
+        (number "6" (effects (font (size 1.016 1.016))))
+      )
+    )
+  )
+)

board/kicad-stuff/DW01.lib

@@ -1,6 +1,24 @@
 EESchema-LIBRARY Version 2.4
 #encoding utf-8
 #
+# CN61CN33
+#
+DEF CN61CN33 U 0 20 Y Y 1 F N
+F0 "U" 100 500 50 H V C CNN
+F1 "CN61CN33" 200 400 50 H V C CNN
+F2 "Package_TO_SOT_SMD:SOT-23" 300 100 50 H I C CNN
+F3 "" 300 100 50 H I C CNN
+$FPLIST
+ SOT?23*
+$ENDFPLIST
+DRAW
+S 200 300 -200 -300 0 1 10 f
+X RESET 1 0 -400 100 U 50 50 1 1 O
+X GND 2 300 0 100 L 50 50 1 1 W
+X VCC 3 0 400 100 D 50 50 1 1 W
+ENDDRAW
+ENDDEF
+#
 # DS2438
 #
 DEF DS2438 U 0 40 Y Y 1 F N

board/kicad-stuff/ESP32/ESP32-DEVKITC-32D.kicad_sym

@@ -0,0 +1,454 @@
+(kicad_symbol_lib (version 20220914) (generator kicad_symbol_editor)
+  (symbol "ESP32-DEVKITC-32D" (pin_names (offset 1.016)) (in_bom yes) (on_board yes)
+    (property "Reference" "U" (at -15.2654 26.0604 0)
+      (effects (font (size 1.27 1.27)) (justify left bottom))
+    )
+    (property "Value" "ESP32-DEVKITC-32D" (at -15.2654 -27.9654 0)
+      (effects (font (size 1.27 1.27)) (justify left bottom))
+    )
+    (property "Footprint" "MODULE_ESP32-DEVKITC-32D" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify left bottom) hide)
+    )
+    (property "Datasheet" "4" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify left bottom) hide)
+    )
+    (property "Field4" "Espressif Systems" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify left bottom) hide)
+    )
+    (property "ki_locked" "" (at 0 0 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (symbol "ESP32-DEVKITC-32D_0_0"
+      (polyline
+        (pts
+          (xy -15.24 -25.4)
+          (xy -15.24 25.4)
+        )
+        (stroke (width 0.254) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy -15.24 25.4)
+          (xy 15.24 25.4)
+        )
+        (stroke (width 0.254) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy 15.24 -25.4)
+          (xy -15.24 -25.4)
+        )
+        (stroke (width 0.254) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy 15.24 25.4)
+          (xy 15.24 -25.4)
+        )
+        (stroke (width 0.254) (type solid))
+        (fill (type none))
+      )
+      (pin power_in line (at -20.32 22.86 0) (length 5.08)
+        (name "3V3" (effects (font (size 1.016 1.016))))
+        (number "1" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at -20.32 0 0) (length 5.08)
+        (name "IO26" (effects (font (size 1.016 1.016))))
+        (number "10" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at -20.32 -2.54 0) (length 5.08)
+        (name "IO27" (effects (font (size 1.016 1.016))))
+        (number "11" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at -20.32 -5.08 0) (length 5.08)
+        (name "IO14" (effects (font (size 1.016 1.016))))
+        (number "12" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at -20.32 -7.62 0) (length 5.08)
+        (name "IO12" (effects (font (size 1.016 1.016))))
+        (number "13" (effects (font (size 1.016 1.016))))
+      )
+      (pin power_in line (at -20.32 -10.16 0) (length 5.08)
+        (name "GND1" (effects (font (size 1.016 1.016))))
+        (number "14" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at -20.32 -12.7 0) (length 5.08)
+        (name "IO13" (effects (font (size 1.016 1.016))))
+        (number "15" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at -20.32 -15.24 0) (length 5.08)
+        (name "SD2" (effects (font (size 1.016 1.016))))
+        (number "16" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at -20.32 -17.78 0) (length 5.08)
+        (name "SD3" (effects (font (size 1.016 1.016))))
+        (number "17" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at -20.32 -20.32 0) (length 5.08)
+        (name "CMD" (effects (font (size 1.016 1.016))))
+        (number "18" (effects (font (size 1.016 1.016))))
+      )
+      (pin power_in line (at -20.32 -22.86 0) (length 5.08)
+        (name "EXT_5V" (effects (font (size 1.016 1.016))))
+        (number "19" (effects (font (size 1.016 1.016))))
+      )
+      (pin input line (at -20.32 20.32 0) (length 5.08)
+        (name "EN" (effects (font (size 1.016 1.016))))
+        (number "2" (effects (font (size 1.016 1.016))))
+      )
+      (pin power_in line (at 20.32 22.86 180) (length 5.08)
+        (name "GND3" (effects (font (size 1.016 1.016))))
+        (number "20" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at 20.32 20.32 180) (length 5.08)
+        (name "IO23" (effects (font (size 1.016 1.016))))
+        (number "21" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at 20.32 17.78 180) (length 5.08)
+        (name "IO22" (effects (font (size 1.016 1.016))))
+        (number "22" (effects (font (size 1.016 1.016))))
+      )
+      (pin output line (at 20.32 15.24 180) (length 5.08)
+        (name "TXD0" (effects (font (size 1.016 1.016))))
+        (number "23" (effects (font (size 1.016 1.016))))
+      )
+      (pin input line (at 20.32 12.7 180) (length 5.08)
+        (name "RXD0" (effects (font (size 1.016 1.016))))
+        (number "24" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at 20.32 10.16 180) (length 5.08)
+        (name "IO21" (effects (font (size 1.016 1.016))))
+        (number "25" (effects (font (size 1.016 1.016))))
+      )
+      (pin power_in line (at 20.32 7.62 180) (length 5.08)
+        (name "GND2" (effects (font (size 1.016 1.016))))
+        (number "26" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at 20.32 5.08 180) (length 5.08)
+        (name "IO19" (effects (font (size 1.016 1.016))))
+        (number "27" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at 20.32 2.54 180) (length 5.08)
+        (name "IO18" (effects (font (size 1.016 1.016))))
+        (number "28" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at 20.32 0 180) (length 5.08)
+        (name "IO5" (effects (font (size 1.016 1.016))))
+        (number "29" (effects (font (size 1.016 1.016))))
+      )
+      (pin input line (at -20.32 17.78 0) (length 5.08)
+        (name "SENSOR_VP" (effects (font (size 1.016 1.016))))
+        (number "3" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at 20.32 -2.54 180) (length 5.08)
+        (name "IO17" (effects (font (size 1.016 1.016))))
+        (number "30" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at 20.32 -5.08 180) (length 5.08)
+        (name "IO16" (effects (font (size 1.016 1.016))))
+        (number "31" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at 20.32 -7.62 180) (length 5.08)
+        (name "IO4" (effects (font (size 1.016 1.016))))
+        (number "32" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at 20.32 -10.16 180) (length 5.08)
+        (name "IO0" (effects (font (size 1.016 1.016))))
+        (number "33" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at 20.32 -12.7 180) (length 5.08)
+        (name "IO2" (effects (font (size 1.016 1.016))))
+        (number "34" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at 20.32 -15.24 180) (length 5.08)
+        (name "IO15" (effects (font (size 1.016 1.016))))
+        (number "35" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at 20.32 -17.78 180) (length 5.08)
+        (name "SD1" (effects (font (size 1.016 1.016))))
+        (number "36" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at 20.32 -20.32 180) (length 5.08)
+        (name "SD0" (effects (font (size 1.016 1.016))))
+        (number "37" (effects (font (size 1.016 1.016))))
+      )
+      (pin input clock (at 20.32 -22.86 180) (length 5.08)
+        (name "CLK" (effects (font (size 1.016 1.016))))
+        (number "38" (effects (font (size 1.016 1.016))))
+      )
+      (pin input line (at -20.32 15.24 0) (length 5.08)
+        (name "SENSOR_VN" (effects (font (size 1.016 1.016))))
+        (number "4" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at -20.32 12.7 0) (length 5.08)
+        (name "IO34" (effects (font (size 1.016 1.016))))
+        (number "5" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at -20.32 10.16 0) (length 5.08)
+        (name "IO35" (effects (font (size 1.016 1.016))))
+        (number "6" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at -20.32 7.62 0) (length 5.08)
+        (name "IO32" (effects (font (size 1.016 1.016))))
+        (number "7" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at -20.32 5.08 0) (length 5.08)
+        (name "IO33" (effects (font (size 1.016 1.016))))
+        (number "8" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at -20.32 2.54 0) (length 5.08)
+        (name "IO25" (effects (font (size 1.016 1.016))))
+        (number "9" (effects (font (size 1.016 1.016))))
+      )
+    )
+  )
+  (symbol "SL2300" (pin_names (offset 1.016)) (in_bom yes) (on_board yes)
+    (property "Reference" "Q" (at 0 0 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Value" "SL2300" (at 7.62 0 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Footprint" "" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "Datasheet" "" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (symbol "SL2300_1_1"
+      (polyline
+        (pts
+          (xy -1.016 0)
+          (xy -3.81 0)
+        )
+        (stroke (width 0) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy -1.016 1.905)
+          (xy -1.016 -1.905)
+        )
+        (stroke (width 0.254) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy -0.508 -1.27)
+          (xy -0.508 -2.286)
+        )
+        (stroke (width 0.254) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy -0.508 0.508)
+          (xy -0.508 -0.508)
+        )
+        (stroke (width 0.254) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy -0.508 2.286)
+          (xy -0.508 1.27)
+        )
+        (stroke (width 0.254) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy 1.27 2.54)
+          (xy 1.27 1.778)
+        )
+        (stroke (width 0) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy 1.27 -2.54)
+          (xy 1.27 0)
+          (xy -0.508 0)
+        )
+        (stroke (width 0) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy -0.508 -1.778)
+          (xy 2.032 -1.778)
+          (xy 2.032 1.778)
+          (xy -0.508 1.778)
+        )
+        (stroke (width 0) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy -0.254 0)
+          (xy 0.762 0.381)
+          (xy 0.762 -0.381)
+          (xy -0.254 0)
+        )
+        (stroke (width 0) (type solid))
+        (fill (type outline))
+      )
+      (polyline
+        (pts
+          (xy 1.524 0.508)
+          (xy 1.651 0.381)
+          (xy 2.413 0.381)
+          (xy 2.54 0.254)
+        )
+        (stroke (width 0) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy 2.032 0.381)
+          (xy 1.651 -0.254)
+          (xy 2.413 -0.254)
+          (xy 2.032 0.381)
+        )
+        (stroke (width 0) (type solid))
+        (fill (type none))
+      )
+      (circle (center 0.381 0) (radius 2.794)
+        (stroke (width 0.254) (type solid))
+        (fill (type none))
+      )
+      (circle (center 1.27 -1.778) (radius 0.254)
+        (stroke (width 0) (type solid))
+        (fill (type outline))
+      )
+      (circle (center 1.27 1.778) (radius 0.254)
+        (stroke (width 0) (type solid))
+        (fill (type outline))
+      )
+      (pin input line (at -6.35 0 0) (length 2.54)
+        (name "G" (effects (font (size 1.27 1.27))))
+        (number "1" (effects (font (size 1.27 1.27))))
+      )
+      (pin passive line (at 1.27 -5.08 90) (length 2.54)
+        (name "S" (effects (font (size 1.27 1.27))))
+        (number "2" (effects (font (size 1.27 1.27))))
+      )
+      (pin passive line (at 1.27 5.08 270) (length 2.54)
+        (name "D" (effects (font (size 1.27 1.27))))
+        (number "3" (effects (font (size 1.27 1.27))))
+      )
+    )
+  )
+  (symbol "SR04M-2" (pin_names (offset 1.016)) (in_bom yes) (on_board yes)
+    (property "Reference" "H" (at 6.35 27.94 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Value" "SR04M-2" (at 7.62 -21.59 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Footprint" "" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "Datasheet" "" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (symbol "SR04M-2_0_1"
+      (rectangle (start -22.86 26.67) (end 41.91 -20.32)
+        (stroke (width 0.254) (type solid))
+        (fill (type none))
+      )
+    )
+  )
+  (symbol "SR04M-2-HeaderConn_01x04_Female" (pin_names (offset 1.016) hide) (in_bom yes) (on_board yes)
+    (property "Reference" "J" (at 0 5.08 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Value" "SR04M-2-HeaderConn_01x04_Female" (at 0 -7.62 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Footprint" "ESP32:SR04M-2PinHeader_1x04_P2.54mm_Vertical" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "Datasheet" "~" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "ki_keywords" "connector" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "ki_description" "Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "ki_fp_filters" "Connector*:*_1x??_*" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (symbol "SR04M-2-HeaderConn_01x04_Female_1_1"
+      (arc (start 0 -4.572) (mid -0.5058 -5.08) (end 0 -5.588)
+        (stroke (width 0.1524) (type solid))
+        (fill (type none))
+      )
+      (arc (start 0 -2.032) (mid -0.5058 -2.54) (end 0 -3.048)
+        (stroke (width 0.1524) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy -1.27 -5.08)
+          (xy -0.508 -5.08)
+        )
+        (stroke (width 0.1524) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy -1.27 -2.54)
+          (xy -0.508 -2.54)
+        )
+        (stroke (width 0.1524) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy -1.27 0)
+          (xy -0.508 0)
+        )
+        (stroke (width 0.1524) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy -1.27 2.54)
+          (xy -0.508 2.54)
+        )
+        (stroke (width 0.1524) (type solid))
+        (fill (type none))
+      )
+      (arc (start 0 0.508) (mid -0.5058 0) (end 0 -0.508)
+        (stroke (width 0.1524) (type solid))
+        (fill (type none))
+      )
+      (arc (start 0 3.048) (mid -0.5058 2.54) (end 0 2.032)
+        (stroke (width 0.1524) (type solid))
+        (fill (type none))
+      )
+      (pin power_in line (at -5.08 2.54 0) (length 3.81)
+        (name "VCC" (effects (font (size 1.27 1.27))))
+        (number "1" (effects (font (size 1.27 1.27))))
+      )
+      (pin input line (at -5.08 0 0) (length 3.81)
+        (name "RX" (effects (font (size 1.27 1.27))))
+        (number "2" (effects (font (size 1.27 1.27))))
+      )
+      (pin output line (at -5.08 -2.54 0) (length 3.81)
+        (name "TX" (effects (font (size 1.27 1.27))))
+        (number "3" (effects (font (size 1.27 1.27))))
+      )
+      (pin power_in line (at -5.08 -5.08 0) (length 3.81)
+        (name "GND" (effects (font (size 1.27 1.27))))
+        (number "4" (effects (font (size 1.27 1.27))))
+      )
+    )
+  )
+)

board/kicad-stuff/LP38690DT-3.3.kicad_sym

@@ -0,0 +1,74 @@
+(kicad_symbol_lib (version 20220914) (generator kicad_symbol_editor)
+  (symbol "LP38690DT-3.3" (pin_names (offset 1.016)) (in_bom yes) (on_board yes)
+    (property "Reference" "U" (at -10.16 5.08 0)
+      (effects (font (size 1.27 1.27)) (justify left bottom))
+    )
+    (property "Value" "LP38690DT-3.3" (at -10.16 -7.62 0)
+      (effects (font (size 1.27 1.27)) (justify left bottom))
+    )
+    (property "Footprint" "DPAK457P991X255-3N" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify left bottom) hide)
+    )
+    (property "Datasheet" "IPC-7351B" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify left bottom) hide)
+    )
+    (property "Field4" "Texas Instruments" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify left bottom) hide)
+    )
+    (property "Field5" "M" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify left bottom) hide)
+    )
+    (property "Field6" "2.55mm" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify left bottom) hide)
+    )
+    (property "ki_locked" "" (at 0 0 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (symbol "LP38690DT-3.3_0_0"
+      (polyline
+        (pts
+          (xy -10.16 -5.08)
+          (xy 10.16 -5.08)
+        )
+        (stroke (width 0.1524) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy -10.16 5.08)
+          (xy -10.16 -5.08)
+        )
+        (stroke (width 0.1524) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy 10.16 -5.08)
+          (xy 10.16 5.08)
+        )
+        (stroke (width 0.1524) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy 10.16 5.08)
+          (xy -10.16 5.08)
+        )
+        (stroke (width 0.1524) (type solid))
+        (fill (type none))
+      )
+      (pin output line (at 15.24 2.54 180) (length 5.08)
+        (name "OUT" (effects (font (size 1.016 1.016))))
+        (number "1" (effects (font (size 1.016 1.016))))
+      )
+      (pin input line (at -15.24 2.54 0) (length 5.08)
+        (name "IN" (effects (font (size 1.016 1.016))))
+        (number "3" (effects (font (size 1.016 1.016))))
+      )
+      (pin power_in line (at 15.24 -2.54 180) (length 5.08)
+        (name "GND" (effects (font (size 1.016 1.016))))
+        (number "4" (effects (font (size 1.016 1.016))))
+      )
+    )
+  )
+)

board/kicad-stuff/SOP65P640X120-14N.kicad_mod

@@ -0,0 +1,37 @@
+
+(footprint SOP65P640X120-14N (layer F.Cu) (tedit 65346025)
+  (descr "")
+  (attr smd)
+  (fp_text reference REF** (at -0.595 -3.435 0) (layer F.SilkS)
+    (effects (font (size 1.0 1.0) (thickness 0.15)))
+  )
+  (fp_text value SOP65P640X120-14N (at 7.025 3.435 0) (layer F.Fab)
+    (effects (font (size 1.0 1.0) (thickness 0.15)))
+  )
+  (pad 1 smd roundrect (roundrect_rratio 0.05) (at -2.87 -1.95) (size 1.57 0.41) (layers F.Cu F.Mask F.Paste) (solder_mask_margin 0.102))
+  (pad 2 smd roundrect (roundrect_rratio 0.05) (at -2.87 -1.3) (size 1.57 0.41) (layers F.Cu F.Mask F.Paste) (solder_mask_margin 0.102))
+  (pad 3 smd roundrect (roundrect_rratio 0.05) (at -2.87 -0.65) (size 1.57 0.41) (layers F.Cu F.Mask F.Paste) (solder_mask_margin 0.102))
+  (pad 4 smd roundrect (roundrect_rratio 0.05) (at -2.87 0.0) (size 1.57 0.41) (layers F.Cu F.Mask F.Paste) (solder_mask_margin 0.102))
+  (pad 5 smd roundrect (roundrect_rratio 0.05) (at -2.87 0.65) (size 1.57 0.41) (layers F.Cu F.Mask F.Paste) (solder_mask_margin 0.102))
+  (pad 6 smd roundrect (roundrect_rratio 0.05) (at -2.87 1.3) (size 1.57 0.41) (layers F.Cu F.Mask F.Paste) (solder_mask_margin 0.102))
+  (pad 7 smd roundrect (roundrect_rratio 0.05) (at -2.87 1.95) (size 1.57 0.41) (layers F.Cu F.Mask F.Paste) (solder_mask_margin 0.102))
+  (pad 8 smd roundrect (roundrect_rratio 0.05) (at 2.87 1.95) (size 1.57 0.41) (layers F.Cu F.Mask F.Paste) (solder_mask_margin 0.102))
+  (pad 9 smd roundrect (roundrect_rratio 0.05) (at 2.87 1.3) (size 1.57 0.41) (layers F.Cu F.Mask F.Paste) (solder_mask_margin 0.102))
+  (pad 10 smd roundrect (roundrect_rratio 0.05) (at 2.87 0.65) (size 1.57 0.41) (layers F.Cu F.Mask F.Paste) (solder_mask_margin 0.102))
+  (pad 11 smd roundrect (roundrect_rratio 0.05) (at 2.87 0.0) (size 1.57 0.41) (layers F.Cu F.Mask F.Paste) (solder_mask_margin 0.102))
+  (pad 12 smd roundrect (roundrect_rratio 0.05) (at 2.87 -0.65) (size 1.57 0.41) (layers F.Cu F.Mask F.Paste) (solder_mask_margin 0.102))
+  (pad 13 smd roundrect (roundrect_rratio 0.05) (at 2.87 -1.3) (size 1.57 0.41) (layers F.Cu F.Mask F.Paste) (solder_mask_margin 0.102))
+  (pad 14 smd roundrect (roundrect_rratio 0.05) (at 2.87 -1.95) (size 1.57 0.41) (layers F.Cu F.Mask F.Paste) (solder_mask_margin 0.102))
+  (fp_circle (center -4.24 -2.26) (end -4.14 -2.26) (layer F.SilkS) (width 0.2))
+  (fp_circle (center -4.24 -2.26) (end -4.14 -2.26) (layer F.Fab) (width 0.2))
+  (fp_line (start -2.2 -2.5) (end 2.2 -2.5) (layer F.Fab) (width 0.127))
+  (fp_line (start -2.2 2.5) (end 2.2 2.5) (layer F.Fab) (width 0.127))
+  (fp_line (start -2.2 -2.5) (end 2.2 -2.5) (layer F.SilkS) (width 0.127))
+  (fp_line (start -2.2 2.5) (end 2.2 2.5) (layer F.SilkS) (width 0.127))
+  (fp_line (start -2.2 -2.5) (end -2.2 2.5) (layer F.Fab) (width 0.127))
+  (fp_line (start 2.2 -2.5) (end 2.2 2.5) (layer F.Fab) (width 0.127))
+  (fp_line (start -3.905 -2.75) (end 3.905 -2.75) (layer F.CrtYd) (width 0.05))
+  (fp_line (start -3.905 2.75) (end 3.905 2.75) (layer F.CrtYd) (width 0.05))
+  (fp_line (start -3.905 -2.75) (end -3.905 2.75) (layer F.CrtYd) (width 0.05))
+  (fp_line (start 3.905 -2.75) (end 3.905 2.75) (layer F.CrtYd) (width 0.05))
+)

board/kicad-stuff/SSOP10.kicad_mod

@@ -0,0 +1,29 @@
+
+(footprint SSOP10 (layer F.Cu) (tedit 652971AF)
+  (descr "")
+  (attr smd)
+  (fp_text reference REF** (at -3.2004 0.0 900) (layer F.SilkS)
+    (effects (font (size 0.64 0.64) (thickness 0.15)))
+  )
+  (fp_text value SSOP10 (at 3.1496 -0.4064 900) (layer F.Fab)
+    (effects (font (size 0.64 0.64) (thickness 0.15)))
+  )
+  (pad 2 smd rect (at -1.0 2.8) (size 0.6 1.75) (layers F.Cu F.Mask F.Paste) (solder_mask_margin 0.102))
+  (pad 9 smd rect (at -1.0 -2.8) (size 0.6 1.75) (layers F.Cu F.Mask F.Paste) (solder_mask_margin 0.102))
+  (pad 1 smd rect (at -2.0 2.8) (size 0.6 1.75) (layers F.Cu F.Mask F.Paste) (solder_mask_margin 0.102))
+  (pad 3 smd rect (at 0.0 2.8) (size 0.6 1.75) (layers F.Cu F.Mask F.Paste) (solder_mask_margin 0.102))
+  (pad 4 smd rect (at 1.0 2.8) (size 0.6 1.75) (layers F.Cu F.Mask F.Paste) (solder_mask_margin 0.102))
+  (pad 10 smd rect (at -2.0 -2.8) (size 0.6 1.75) (layers F.Cu F.Mask F.Paste) (solder_mask_margin 0.102))
+  (pad 8 smd rect (at 0.0 -2.8) (size 0.6 1.75) (layers F.Cu F.Mask F.Paste) (solder_mask_margin 0.102))
+  (pad 7 smd rect (at 1.0 -2.8) (size 0.6 1.75) (layers F.Cu F.Mask F.Paste) (solder_mask_margin 0.102))
+  (pad 5 smd rect (at 2.0 2.8) (size 0.6 1.75) (layers F.Cu F.Mask F.Paste) (solder_mask_margin 0.102))
+  (pad 6 smd rect (at 2.0 -2.8) (size 0.6 1.75) (layers F.Cu F.Mask F.Paste) (solder_mask_margin 0.102))
+  (fp_line (start 2.527 -1.9) (end 2.527 1.4) (layer F.Fab) (width 0.2032))
+  (fp_line (start 2.527 1.4) (end 2.527 1.9) (layer F.Fab) (width 0.2032))
+  (fp_line (start 2.527 1.9) (end -2.527 1.9) (layer F.Fab) (width 0.2032))
+  (fp_line (start -2.527 1.9) (end -2.527 1.4) (layer F.Fab) (width 0.2032))
+  (fp_line (start -2.527 1.4) (end -2.527 -1.9) (layer F.Fab) (width 0.2032))
+  (fp_line (start -2.527 -1.9) (end 2.527 -1.9) (layer F.Fab) (width 0.2032))
+  (fp_line (start 2.527 1.4) (end -2.527 1.4) (layer F.Fab) (width 0.2032))
+  (fp_line (start -1.905 1.016) (end -1.905 -1.016) (layer F.SilkS) (width 0.3048))
+)

board/kicad-stuff/SX1308.kicad_sym

@@ -0,0 +1,104 @@
+(kicad_symbol_lib (version 20220914) (generator kicad_symbol_editor)
+  (symbol "SX1308" (pin_names (offset 1.016)) (in_bom yes) (on_board yes)
+    (property "Reference" "U" (at -17.78 20.32 0)
+      (effects (font (size 1.27 1.27)) (justify left bottom))
+    )
+    (property "Value" "SX1308" (at -17.8054 17.8054 0)
+      (effects (font (size 1.27 1.27)) (justify left bottom))
+    )
+    (property "Footprint" "SOT-23-6" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify left bottom) hide)
+    )
+    (property "Datasheet" "" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) (justify left bottom) hide)
+    )
+    (property "ki_locked" "" (at 0 0 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (symbol "SX1308_0_0"
+      (polyline
+        (pts
+          (xy -17.78 -7.62)
+          (xy -17.78 15.24)
+        )
+        (stroke (width 0.254) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy -17.78 15.24)
+          (xy 0 15.24)
+        )
+        (stroke (width 0.254) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy -13.7922 0.1778)
+          (xy -11.2522 0.1778)
+        )
+        (stroke (width 0.254) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy -11.303 1.6764)
+          (xy -8.763 1.6764)
+        )
+        (stroke (width 0.254) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy -11.2522 0.1778)
+          (xy -11.303 1.6764)
+        )
+        (stroke (width 0.254) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy 0 -7.62)
+          (xy -17.78 -7.62)
+        )
+        (stroke (width 0.254) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy 0 15.24)
+          (xy 0 -7.62)
+        )
+        (stroke (width 0.254) (type solid))
+        (fill (type none))
+      )
+      (text "ON/OFF" (at -10.8712 -0.0508 0)
+        (effects (font (size 0.8128 0.8128)) (justify left bottom))
+      )
+      (pin bidirectional line (at 5.08 12.7 180) (length 5.08)
+        (name "SW" (effects (font (size 1.016 1.016))))
+        (number "1" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at -22.86 -5.08 0) (length 5.08)
+        (name "GND" (effects (font (size 1.016 1.016))))
+        (number "2" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at 5.08 -2.54 180) (length 5.08)
+        (name "FB" (effects (font (size 1.016 1.016))))
+        (number "3" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at -22.86 2.54 0) (length 5.08)
+        (name "EN" (effects (font (size 1.016 1.016))))
+        (number "4" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at -22.86 12.7 0) (length 5.08)
+        (name "IN" (effects (font (size 1.016 1.016))))
+        (number "5" (effects (font (size 1.016 1.016))))
+      )
+      (pin bidirectional line (at 5.08 5.08 180) (length 5.08)
+        (name "N/C" (effects (font (size 1.016 1.016))))
+        (number "6" (effects (font (size 1.016 1.016))))
+      )
+    )
+  )
+)

board/kicad-stuff/ds2438.kicad_sym

@@ -0,0 +1,168 @@
+(kicad_symbol_lib (version 20220914) (generator kicad_symbol_editor)
+  (symbol "ds2438az+" (pin_names (offset 0.254)) (in_bom yes) (on_board yes)
+    (property "Reference" "U" (at 30.48 10.16 0)
+      (effects (font (size 1.524 1.524)))
+    )
+    (property "Value" "ds2438az+" (at 30.48 7.62 0)
+      (effects (font (size 1.524 1.524)))
+    )
+    (property "Footprint" "21-0041B_8_MXM" (at 30.48 6.096 0)
+      (effects (font (size 1.524 1.524)) hide)
+    )
+    (property "Datasheet" "" (at 0 0 0)
+      (effects (font (size 1.524 1.524)))
+    )
+    (property "ki_locked" "" (at 0 0 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "ki_fp_filters" "21-0041B_8_MXM 21-0041B_8_MXM-M 21-0041B_8_MXM-L" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (symbol "ds2438az+_1_1"
+      (polyline
+        (pts
+          (xy 7.112 -7.62)
+          (xy 6.0452 -8.128)
+        )
+        (stroke (width 0.127) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy 7.112 -7.62)
+          (xy 6.0452 -7.112)
+        )
+        (stroke (width 0.127) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy 7.112 -5.08)
+          (xy 6.0452 -5.588)
+        )
+        (stroke (width 0.127) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy 7.112 -5.08)
+          (xy 6.0452 -4.572)
+        )
+        (stroke (width 0.127) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy 7.112 -2.54)
+          (xy 6.0452 -3.048)
+        )
+        (stroke (width 0.127) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy 7.112 -2.54)
+          (xy 6.0452 -2.032)
+        )
+        (stroke (width 0.127) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy 7.62 -12.7)
+          (xy 53.34 -12.7)
+        )
+        (stroke (width 0.127) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy 7.62 5.08)
+          (xy 7.62 -12.7)
+        )
+        (stroke (width 0.127) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy 53.34 -12.7)
+          (xy 53.34 5.08)
+        )
+        (stroke (width 0.127) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy 53.34 5.08)
+          (xy 7.62 5.08)
+        )
+        (stroke (width 0.127) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy 53.848 0)
+          (xy 54.9148 -0.508)
+        )
+        (stroke (width 0.127) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy 53.848 0)
+          (xy 54.9148 0.508)
+        )
+        (stroke (width 0.127) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy 55.4228 -0.508)
+          (xy 56.4642 0)
+        )
+        (stroke (width 0.127) (type solid))
+        (fill (type none))
+      )
+      (polyline
+        (pts
+          (xy 55.4228 0.508)
+          (xy 56.4642 0)
+        )
+        (stroke (width 0.127) (type solid))
+        (fill (type none))
+      )
+      (pin power_in line (at 0 0 0) (length 7.62)
+        (name "GND" (effects (font (size 1.4986 1.4986))))
+        (number "1" (effects (font (size 1.4986 1.4986))))
+      )
+      (pin input line (at 0 -2.54 0) (length 7.62)
+        (name "VSENS+" (effects (font (size 1.4986 1.4986))))
+        (number "2" (effects (font (size 1.4986 1.4986))))
+      )
+      (pin input line (at 0 -5.08 0) (length 7.62)
+        (name "VSENS-" (effects (font (size 1.4986 1.4986))))
+        (number "3" (effects (font (size 1.4986 1.4986))))
+      )
+      (pin input line (at 0 -7.62 0) (length 7.62)
+        (name "VAD" (effects (font (size 1.4986 1.4986))))
+        (number "4" (effects (font (size 1.4986 1.4986))))
+      )
+      (pin power_in line (at 60.96 -7.62 180) (length 7.62)
+        (name "VDD" (effects (font (size 1.4986 1.4986))))
+        (number "5" (effects (font (size 1.4986 1.4986))))
+      )
+      (pin no_connect line (at 60.96 -5.08 180) (length 7.62)
+        (name "NC" (effects (font (size 1.4986 1.4986))))
+        (number "6" (effects (font (size 1.4986 1.4986))))
+      )
+      (pin no_connect line (at 60.96 -2.54 180) (length 7.62)
+        (name "NC" (effects (font (size 1.4986 1.4986))))
+        (number "7" (effects (font (size 1.4986 1.4986))))
+      )
+      (pin bidirectional line (at 60.96 0 180) (length 7.62)
+        (name "DQ" (effects (font (size 1.4986 1.4986))))
+        (number "8" (effects (font (size 1.4986 1.4986))))
+      )
+    )
+  )
+)

board/sym-lib-table

@@ -1,7 +1,11 @@
-(sym_lib_table
-  (lib (name LP38690DT-3.3)(type Legacy)(uri ${KIPRJMOD}/kicad-stuff/LP38690DT-3.3.lib)(options "")(descr ""))
-  (lib (name ESP32-DEVKITC-32D)(type Legacy)(uri ${KIPRJMOD}/kicad-stuff/ESP32/ESP32-DEVKITC-32D.lib)(options "")(descr ""))
-  (lib (name DW01)(type Legacy)(uri ${KIPRJMOD}/kicad-stuff/DW01.lib)(options "")(descr ""))
-  (lib (name SX1308)(type Legacy)(uri ${KIPRJMOD}/kicad-stuff/SX1308.lib)(options "")(descr ""))
-  (lib (name ds2438)(type Legacy)(uri ${KIPRJMOD}/kicad-stuff/ds2438.lib)(options "")(descr ""))
-)
+(sym_lib_table
+  (version 7)
+  (lib (name "LP38690DT-3.3")(type "KiCad")(uri "${KIPRJMOD}/kicad-stuff/LP38690DT-3.3.kicad_sym")(options "")(descr ""))
+  (lib (name "ESP32-DEVKITC-32D")(type "KiCad")(uri "${KIPRJMOD}/kicad-stuff/ESP32/ESP32-DEVKITC-32D.kicad_sym")(options "")(descr ""))
+  (lib (name "DW01")(type "KiCad")(uri "${KIPRJMOD}/kicad-stuff/DW01.kicad_sym")(options "")(descr ""))
+  (lib (name "SX1308")(type "KiCad")(uri "${KIPRJMOD}/kicad-stuff/SX1308.kicad_sym")(options "")(descr ""))
+  (lib (name "ds2438")(type "KiCad")(uri "${KIPRJMOD}/kicad-stuff/ds2438.kicad_sym")(options "")(descr ""))
+  (lib (name "CN3306")(type "KiCad")(uri "${KIPRJMOD}/CN3306.kicad_sym")(options "")(descr ""))
+  (lib (name "CN3795")(type "KiCad")(uri "${KIPRJMOD}/CN3795.kicad_sym")(options "")(descr ""))
+  (lib (name "BQ34Z100PWR-G1")(type "KiCad")(uri "${KIPRJMOD}/kicad-stuff/BQ34Z100PWR-G1.kicad_sym")(options "")(descr ""))
+)

esp32/.gitignore

@@ -7,3 +7,4 @@
 doc/
 custom_platformio.ini
 cppcheck-build-dir
+host/settings.json

esp32/.vscode/extensions.json

@@ -0,0 +1,10 @@
+{
+    // See http://go.microsoft.com/fwlink/?LinkId=827846
+    // for the documentation about the extensions.json format
+    "recommendations": [
+        "platformio.platformio-ide"
+    ],
+    "unwantedRecommendations": [
+        "ms-vscode.cpptools-extension-pack"
+    ]
+}

esp32/CMakeLists.txt

@@ -0,0 +1,3 @@
+cmake_minimum_required(VERSION 3.16.0)
+include($ENV{IDF_PATH}/tools/cmake/project.cmake)
+project(esp32)

esp32/PlantControl.code-workspace

@@ -6,16 +6,26 @@
 	],
 	"settings": {
 		"files.associations": {
+			"functional": "cpp",
 			"*.tcc": "cpp",
+			"map": "cpp",
+			"*.cps": "javascript",
 			"bitset": "cpp",
 			"algorithm": "cpp",
 			"istream": "cpp",
 			"limits": "cpp",
 			"streambuf": "cpp",
-			"functional": "cpp",
 			"string": "cpp",
 			"typeinfo": "cpp",
-			"cmath": "cpp"
+			"cmath": "cpp",
+			"iterator": "cpp",
+			"array": "cpp",
+			"tuple": "cpp",
+			"utility": "cpp",
+			"fstream": "cpp",
+			"ostream": "cpp",
+			"sstream": "cpp"
+			"system_error": "cpp"
 		}
 	}
 }

esp32/Readme.md

@@ -1,7 +1,17 @@
 # PlantControl
 ## Hardware
 
-Uses ESP32MiniKit
+Main processor
+* ESP32 with 16MB Flash 
+
+One-Wire
+* Temperatur Sensor (DS18B20)
+* Lipo-Monitoring (DS2438)
+
+Lipo Protection
+* Open drain 3.3V detector (CN61CN33 @ jlcpcb parts)
+
+
 
 ### Used Pins:
 * See '''include/ControllerConfiguration.h'''
@@ -16,9 +26,9 @@ Uses ESP32MiniKit
  * 7 Pumps
  * Sensors
   * Solar powered (voltage)
-  * Lipo-Powered (voltage)
+  * Lipo-Powered (DS2438 for monitoring)
   * Temperature
-  * Distance sensor [JSN-SR04T-2.0] (for waterlevel)
+  * Laser distance sensor [VL53L0X]
  * Custom GPIO
 
 ## Documentation of Power-Modes
@@ -42,35 +52,18 @@ DS18B20 one wire temp sensor
 ## Empires Wunschliste
  * Pflanze
   * Pumpe
-   * Zeitspann (wann laufen darf)
-   * Helligkeitstrigger (Um den Morgen zum pumpen zu erkennen)
-   * Maximal Dauer zum Pumpen (als Zeit oder Milliliter)
-   * Zeitspanne zwischen zwei Pumpvorgängen
+   * [x] Zeitspann (wann laufen darf)
+   * [x] Helligkeitstrigger (Um den Morgen zum pumpen zu erkennen)
+   * [-] Maximal Dauer zum Pumpen (als Zeit oder Milliliter)
+   * [x] Zeitspanne zwischen zwei Pumpvorgängen
   * Moister sensor
-   * Oberen
-   * Unteren Wert
+   * [x] Schwellwert für Pumpe
 * Tank
  * Füllstand Anzeige (in Liter)
  * Minimum Wasserstand (in cm damit Pumpen nicht leer laufen; enspricht 0 nutzbaren Liter)
- * Trigger-Erinnerungen um Wasser nachzufüllen
- * Maximaler Wasserstand des Tanks (in cm & Liter)
-* System
- * Tiefentladungsschutz vom LIPO (fest im Controller die Spannung festlegen)
-  * 3.5V unterschritten, dann nur noch Deepsleep
-  * MQTT Topic, wenn Spannung unterschritten wurde
- * Lipo innerhalb 24h nicht geladen -> MQTT Topic
- * Deep-Sleep
-  * Mode1: 
-    * Nur Sensor werte einsameln
-    * Wird verlassen bei Aktionen
-        * Pumpe schalten
-        * MQTT Nachrichten
-        * nach x Minuten nur in Mode1
-  * Mode2: 
-    * WLAN aktivieren und Werte über MQTT raus hauen
-    * aktuelle Werte raushauen
-    * MQTT lesen
-  * Mode3:
-    * Deepsleep verboten (MQTT topic, retained)
-    * alle Pumpen & Sensoren deaktiviert
+ * [x] Maximaler Wasserstand des Tanks (in cm & Liter)
+
+## Masterplan 2.0
+ * Partitionslayout
+
 

esp32/custom_platformio.ini.example

@@ -5,13 +5,12 @@ framework = arduino
 build_flags = -DPIO_FRAMEWORK_ARDUINO_LWIP2_LOW_MEMORY
 board_build.partitions = defaultWithSmallerSpiffs.csv
 
-extra_configs = custom_platformio.ini
-
 ; the latest development brankitchen-lightch (convention V3.0.x) 
 lib_deps = ArduinoJson@6.16.1
-            https://github.com/homieiot/homie-esp8266.git#v3.0
             OneWire
             DallasTemperature
+            pololu/VL53L0X
+            https://github.com/homieiot/homie-esp8266.git#develop
 
 ; add additional parameter, like the upload port
 upload_port=/dev/ttyUSB1

esp32/defaultWithSmallerSpiffs.csv

@@ -1,6 +1,7 @@
-# Name,   Type, SubType, Offset,  Size, Flags
-nvs,      data, nvs,     0x9000,  0x5000,
-otadata,  data, ota,     0xe000,  0x2000,
-app0,     app,  ota_0,   0x10000, 0x150000,
-app1,     app,  ota_1,   0x160000,0x150000,
-spiffs,   data, spiffs,  0x300000,0x17000,
+# Name,   Type, SubType,  Offset,   Size,  Flags
+nvs, data, nvs, 0x9000, 0x4000
+otadata, data, ota, 0xD000, 0x2000
+phy_init, data, phy, 0xF000, 0x1000
+ota_0, app, ota_0, 0x10000, 0x1E0000
+ota_1, app, ota_1, 0x1F0000, 0x1E0000
+spiffs, data, spiffs, 0x3D0000, 0x30000

esp32/host/config-example.json

@@ -1,49 +0,0 @@
-{
-  "name": "PlantControl",
-  "device_id": "PlantCtrl1",
-  "device_stats_interval": 60,
-  "wifi": {
-    "ssid": "SSID",
-    "bssid" : "BSSID",
-    "password": "mysecretPassword",
-    "channel": 1
-  },
-  "mqtt": {
-    "host": "[0-255].[0-255].[0-255].[0-255]",
-    "port": 1883,
-    "base_topic": "mqtt/topic/",
-    "auth": false
-  },
-  "ota": {
-    "enabled": true
-  },
-  "settings": {
-    "deepsleep"  : 60000,
-    "nightsleep" : 60000,
-    "pumpdeepsleep": 1000,
-    "watermaxlevel": 50,
-    "watermin" : 5, 
-    "plants" : 3,
-    "moist0" : 2000,
-    "moist1" : 2000,
-    "moist2" : 2000,
-    "moist3" : 2000,
-    "moist4" : 2000,
-    "moist5" : 2000,
-    "moist6" : 2000,
-    "plant0MaxPumpTime": 1000,
-    "plant1MaxPumpTime": 1000,
-    "plant2MaxPumpTime": 1000,
-    "plant3MaxPumpTime": 1000,
-    "plant4MaxPumpTime": 1000,
-    "plant5MaxPumpTime": 1000,
-    "plant6MaxPumpTime": 1000,
-    "plant0MinPumpIdle": 10000,
-    "plant1MinPumpIdle": 10000,
-    "plant2MinPumpIdle": 10000,
-    "plant3MinPumpIdle": 10000,
-    "plant4MinPumpIdle": 10000,
-    "plant5MinPumpIdle": 10000,
-    "plant6MinPumpIdle": 10000
-  }
-}

esp32/host/settings.json.example

@@ -0,0 +1,49 @@
+{
+	"settings": {
+		"sleep":600,
+		"nightsleep": 1200,
+		"pumpsleep": 5,
+		"tankmax": 1000,
+		"tankmin": 100,
+		"tankwarn": 200,
+		"tankVolume": 100,
+		"lipoDSAddr": "abcdefghijklmnop",
+		"tankDSAddr": "abcdefghijklmnop",
+		"ntpServer":"pool.ntp.org",
+		"dry0":50,
+		"hourstart0":6,
+		"hourend0":20,
+		"lowLight0": false,
+		"delay0": 30,
+		"dry1":-1,
+		"hourstart1":6,
+		"hourend1":20,
+		"lowLight1": false,
+		"delay1": 30,
+		"dry2":-1,
+		"hourstart2":6,
+		"hourend2":20,
+		"lowLight2": false,
+		"delay2": 30,		
+		"dry3":-1,
+		"hourstart3":6,
+		"hourend3":20,
+		"lowLight3": false,
+		"delay3": 30,
+		"dry4":-1,
+		"hourstart4":6,
+		"hourend4":20,
+		"lowLight4": false,
+		"delay4": 30,
+		"dry5":-1,
+		"hourstart5":6,
+		"hourend5":20,
+		"lowLight5": false,
+		"delay5": 30,
+		"dry6":-1,
+		"hourstart6":6,
+		"hourend6":20,
+		"lowLight6": false,
+		"delay6": 30
+	}
+}

esp32/host/upload-settings.sh

@@ -0,0 +1,41 @@
+#!//bin/bash
+
+if [ $# -ne 3 ]; then
+	echo "Homie prefex and device index must be specified:"
+	echo "$0 <mqtt host> <prefix> <device index>"
+	echo "e.g."
+	echo "$0 192.168.0.2 test/ MyDeviceId"
+	exit 1
+fi
+
+mqttHost=$1
+mqttPrefix=$2
+homieId=$3
+
+maxSteps=6
+
+settingsFile=settings.json
+if [ ! -f $settingsFile ]; then
+	echo "$settingsFile missing"
+	echo "check $settingsFile.example"
+	exit 1
+fi
+
+mosquitto_pub -h $mqttHost -t "${mqttPrefix}${homieId}/stay/alive/set" -m "1" -r
+echo "(1 / $maxSteps) Waiting ..."
+mosquitto_sub -h $mqttHost -t "${mqttPrefix}${homieId}/#" -R -C 1
+set -e
+echo "(2 / $maxSteps) Waiting 30 seconds ..."
+sleep 30
+mosquitto_pub -h $mqttHost -t "${mqttPrefix}${homieId}/\$implementation/config/set" -f $settingsFile
+echo "(3 / $maxSteps) Waiting for reboot ..."
+sleep 1
+mosquitto_sub -h $mqttHost -t "${mqttPrefix}${homieId}/#" -R -C 1
+echo "(4 / $maxSteps) Alive"
+sleep 20
+echo "(5 / $maxSteps) Create Backup ..."
+mosquitto_pub -h $mqttHost -t "${mqttPrefix}${homieId}/config/backup/set" -m "true" -r
+sleep 5
+echo "(6 / $maxSteps) Shutdown ..."
+mosquitto_pub -h $mqttHost -t "${mqttPrefix}${homieId}/stay/alive/set" -m "0" -r
+exit 0

esp32/host/upload-via-mqtt.sh

@@ -21,7 +21,8 @@ fi
 mosquitto_pub -h $mqttHost -t "${mqttPrefix}${homieId}/stay/alive/set" -m "1" -r
 echo "Waiting ..."
 mosquitto_sub -h $mqttHost -t "${mqttPrefix}${homieId}/#" -R -C 1
-python ota_updater.py -l $mqttHost -t "$mqttPrefix" -i "$homieId" $firmwareFile
+set -e
+python3 ota_updater.py -l $mqttHost -t "$mqttPrefix" -i "$homieId" $firmwareFile
 
 mosquitto_pub -h $mqttHost -t "${mqttPrefix}${homieId}/stay/alive/set" -m "0" -r
 exit 0

esp32/include/ControllerConfiguration.h

@@ -43,67 +43,94 @@
  */
 #ifndef CONTROLLER_CONFIG_H
 #define CONTROLLER_CONFIG_H
+/** \addtogroup GPIO Settings
+ *  @{
+ */
+#define SENSOR_PLANT0 GPIO_NUM_32 /**< GPIO 32 (ADC1) */
+#define SENSOR_PLANT1 GPIO_NUM_33 /**< GPIO 33 (ADC1) */
+#define SENSOR_PLANT2 GPIO_NUM_25 /**< GPIO 25 (ADC2) */
+#define SENSOR_PLANT3 GPIO_NUM_26 /**< GPIO 26 (ADC2) */
+#define SENSOR_PLANT4 GPIO_NUM_27 /**< GPIO 27 (ADC2) */
+#define SENSOR_PLANT5 GPIO_NUM_39 /**< SENSOR_VIN */
+#define SENSOR_PLANT6 GPIO_NUM_36 /**< SENSOR_VP  */
+
+#define OUTPUT_PUMP0 GPIO_NUM_15 /**< GPIO 15 */
+#define OUTPUT_PUMP1 GPIO_NUM_5  /**< GPIO 5 */
+#define OUTPUT_PUMP2 GPIO_NUM_18 /**< GPIO 18 */
+#define OUTPUT_PUMP3 GPIO_NUM_19 /**< GPIO 19 */
+#define OUTPUT_PUMP4 GPIO_NUM_21 /**< GPIO 21 */
+#define OUTPUT_PUMP5 GPIO_NUM_22 /**< GPIO 22  */
+#define OUTPUT_PUMP6 GPIO_NUM_23 /**< GPIO 23 */
+
+#define OUTPUT_ENABLE_SENSOR GPIO_NUM_14 /**< GPIO 14 - Enable Sensors  */
+#define OUTPUT_ENABLE_PUMP   GPIO_NUM_13 /**< GPIO 13 - Enable Pumps  */
+
+#define SENSOR_ONEWIRE      GPIO_NUM_4 /**< GPIO 12 - Temperatur sensor, Battery and other cool onewire stuff */
+#define SENSOR_TANK_SDA     GPIO_NUM_17 /**< GPIO 17 - water sensor SDA */ 
+#define SENSOR_TANK_SCL     GPIO_NUM_16 /**< GPIO 16 - water sensor SCL */
+#define BUTTON              GPIO_NUM_0  /**< GPIO 0 - Fix button of NodeMCU */
+
+#define CUSTOM1_PIN1        GPIO_NUM_34   /** direct gpio */
+#define CUSTOM1_PIN3        GPIO_NUM_35   /** direct gpio */
+#define CUSTOM1_PIN5        GPIO_NUM_2   /** mosfet controlled */
+#define CUSTOM1_PIN7        GPIO_NUM_12   /** mosfet controlled */
+
+/* @} */
+
 /** \addtogroup Configuration
  *  @{
  */
-#define FIRMWARE_VERSION "1.0.10"
 
-#define ADC_TO_VOLT(adc)                    ((adc) * 3.3 ) / 4095)
-#define ADC_TO_VOLT_WITH_MULTI(adc, multi)  (((adc)*3.3 * (multi)) / 4095)
-#define MOIST_SENSOR_MAX_ADC                (85 * 4095 / 100)
-#define MOIST_SENSOR_MIN_ADC                (25 * 4095 / 100)
+#ifdef FLOWMETER_PIN
+    #define FLOWMETER_PULSES_PER_ML 2.2
+    #define FIRMWARE_FEATURE1   "Flow"
+#else
+    #define FIRMWARE_FEATURE1   ""
+#endif
 
-#define SOLAR_VOLT(adc) ADC_TO_VOLT_WITH_MULTI(adc, 4.0306) /**< 100k and 33k voltage dividor */
-#define ADC_5V_TO_3V3(adc) ADC_TO_VOLT_WITH_MULTI(adc, 1.69) /**< 33k and 47k8 voltage dividor */
-#define MS_TO_S 1000
+#ifdef TIMED_LIGHT_PIN
+    #define FIRMWARE_FEATURE2   "Light"
+#else
+    #define FIRMWARE_FEATURE2   ""
+#endif
 
-#define SENSOR_LIPO 34   /**< GPIO 34 (ADC1) */
-#define SENSOR_SOLAR 35  /**< GPIO 35 (ADC1) */
-#define SENSOR_PLANT0 12 /**< GPIO 32 (ADC1) */
-#define SENSOR_PLANT1 14/**< GPIO 33 (ADC1) */
-#define SENSOR_PLANT2 27 /**< GPIO 25 (ADC2) */
-#define SENSOR_PLANT3 26 /**< GPIO 26 (ADC2) */
-#define SENSOR_PLANT4 25 /**< GPIO 27 (ADC2) */
-#define SENSOR_PLANT5 14 /**< GPIO 14 (ADC2) */
-#define SENSOR_PLANT6 12 /**< GPIO 12 (ADC2) */
+#define FIRMWARE_BASENAME "PlantControl"
+#define FIRMWARE_NAME FIRMWARE_BASENAME FIRMWARE_FEATURE1 FIRMWARE_FEATURE2
+#define FIRMWARE_VERSION "3.01 HW0.10b" 
 
-#define OUTPUT_PUMP0 15 /**< GPIO 23 */
-#define OUTPUT_PUMP1 5 /**< GPIO 22 */
-#define OUTPUT_PUMP2 18 /**< GPIO 21 */
-#define OUTPUT_PUMP3 19 /**< GPIO 19 */
-#define OUTPUT_PUMP4 21 /**< GPIO 18 */
-#define OUTPUT_PUMP5 22  /**< GPIO 5  */
-#define OUTPUT_PUMP6 23 /**< GPIO 15 */
+#define MOIST_SENSOR_MAX_FRQ               5200 // 60kHz (500Hz margin)
+#define MOIST_SENSOR_MIN_FRQ                500 // 0.5kHz (500Hz margin)
 
-#define OUTPUT_SENSOR 16 /**< GPIO 16 - Enable Sensors  */
-#define OUTPUT_PUMP   13 /**< GPIO 13 - Enable Pumps  */
+#define ANALOG_SENSOR_MAX_MV                1300 //successive approximation of good range
+#define ANALOG_SENSOR_MIN_MV                100  //successive approximation of good range
 
-#define SENSOR_DS18B20 2 /**< GPIO 2 - Temperatur sensor */
-#define BUTTON         0 /**< GPIO 0 - Fix button of NodeMCU */
+#define SOLAR_VOLT_FACTOR           11
+#define BATTSENSOR_INDEX_SOLAR      0
+#define BATTSENSOR_INDEX_BATTERY    1
+
+#define MQTT_TIMEOUT                (1000 * 60) /**< After 10 seconds, MQTT is expected to be connected */
+#define ESP_STALE_TIMEOUT           (MQTT_TIMEOUT+(700*1000))
 
-#define MIN_TIME_RUNNING    5UL /**< Amount of seconds the controller must stay awoken */
 #define MAX_PLANTS          7
-#define MINIMUM_LIPO_VOLT   3.6f    /**< Minimum voltage of the Lipo, that must be present */
-#define NO_LIPO_VOLT        2.0f    /**< No Lipo connected */
-#define MINIMUM_SOLAR_VOLT  4.0f    /**< Minimum voltage of the sun, to detect daylight */
-#define SOLAR_CHARGE_MIN_VOLTAGE 7  /**< Sun is rising (morning detected) */
-#define SOLAR_CHARGE_MAX_VOLTAGE 9  /**< Sun is shining (noon)  */
+#define SOLAR_CHARGE_MIN_VOLTAGE    7   /**< Sun is rising (morning detected) */
+#define SOLAR_CHARGE_MAX_VOLTAGE    9   /**< Sun is shining (noon)  */
+#define SOLAR_MAX_VOLTAGE_POSSIBLE  100 /**< higher values are treated as not connected sensor  */
+#define VOLT_MAX_BATT               4.2f
+#define VOLT_MIN_BATT               3.0f    /**< Minimum battery voltage for normal operation */
+#define LOWVOLT_SLEEP_FACTOR        3       /**< Factor for nightsleep delay, if the battery drops below minimum (@see VOLT_MIN_BATT) */
+#define LOWVOLT_SLEEP_MINIMUM       1800    /**< At low voltage sleep at least for 30 minutes */
 
-#define MAX_CONFIG_SETTING_ITEMS 50 /**< Parameter, that can be configured in Homie */
+#define MAX_CONFIG_SETTING_ITEMS 100 /**< Parameter, that can be configured in Homie */
+#define MAX_JSON_CONFIG_FILE_SIZE_CUSTOM 2500
 
-#define PANIK_MODE_DEEPSLEEP (60 * 60 * 5U) /**< 5 hours in usecond */
-#define PANIK_MODE_DEEPSLEEP_US (PANIK_MODE_DEEPSLEEP * 1000 * 1000)
-#define LIPO_MAX_TEMPERATUR             85
-#define LIPO_MAX_TEMPERATUR_DIFF        10
+#define TEMPERATUR_TIMEOUT              3000    /**< 3 Seconds timeout for the temperatures sensors */
+#define WATERSENSOR_TIMEOUT             3000    /**< 3 Seconds timeout for the water distance sensor */
+#define WATERSENSOR_CYCLE               10       /**< 5 sensor measurement are performed */
+#define DS18B20_RESOLUTION              9       /**< 9bit temperature resolution -> 0.5°C steps */
 
-#define TEMPERATURE_DELTA_TRIGGER_IN_C  1.0f
-#define MOIST_DELTA_TRIGGER_ADC         10
-#define SOLAR_DELTA_VOLT_ADC            3
-#define LIPO_DELTA_VOLT_ADC             0.2 /**< trigger for lipo voltage */
-
-#define TEMPERATUR_TIMEOUT              3000    /**< 3 Seconds timeout for the temperatur sensors */
-#define TEMP_SENSOR_MEASURE_SERIES      5
-#define VOLT_SENSOR_MEASURE_SERIES      5
+#define UTC_OFFSET_DE                   3600    /* UTC offset in seconds for Germany */
+#define UTF_OFFSET_DE_DST               3600    /* offset in seconds if daylight saving time is active */
 
 /* @} */
-#endif
+
+#endif

esp32/include/DS2438.h

@@ -0,0 +1,111 @@
+/**
+ *  @file DS2438.h
+ *
+ *
+ */
+
+#ifndef DS2438_h
+#define DS2438_h
+
+#include <Arduino.h>
+#include <OneWire.h>
+#include "RunningMedian.h"
+
+#define DS2438_TEMPERATURE_CONVERSION_COMMAND 0x44
+#define DS2438_VOLTAGE_CONVERSION_COMMAND 0xb4
+#define DS2438_WRITE_SCRATCHPAD_COMMAND 0x4e
+#define DS2438_COPY_SCRATCHPAD_COMMAND 0x48
+#define DS2438_READ_SCRATCHPAD_COMMAND 0xbe
+#define DS2438_RECALL_MEMORY_COMMAND 0xb8
+
+#define PAGE_MIN 0
+#define PAGE_MAX 7
+
+#define DS2438_CHA 0
+#define DS2438_CHB 1
+
+#define DS2438_MODE_CHA 0x01
+#define DS2438_MODE_CHB 0x02
+#define DS2438_MODE_TEMPERATURE 0x04
+
+#define DS2438_TEMPERATURE_DELAY 10
+#define DS2438_VOLTAGE_CONVERSION_DELAY 8
+
+#define DS2438_MEDIAN_COUNT 5
+#define DS2438_MEDIAN_DELAY 50
+
+#define DEFAULT_PAGE0(var) uint8_t var[8] { \
+    0b00001011 /* X, ADB=0, NVB=0, TB=0, AD=1, EE=0, CA=1, IAD=1 */, \
+    0, /* Temperatur */ \
+    0, /* Temperatur */ \
+    0, /* Voltage */ \
+    0, /* Voltage */ \
+    0, /* Current */ \
+    0, /* Current */ \
+    0b10000000 /* Threshold to 4LSB */ \
+}
+
+typedef struct PageOne {
+    uint8_t eleapsedTimerByte0; /**< LSB of timestamp */
+    uint8_t eleapsedTimerByte1;
+    uint8_t eleapsedTimerByte2;
+    uint8_t eleapsedTimerByte3; /**< MSB of timestamp */
+    uint8_t ICA; /**< Integrated Current Accumulator (current flowing into and out of the battery) */
+    uint8_t offsetRegisterByte0; /**< Offset for ADC calibdation */
+    uint8_t offsetRegisterByte1; /**< Offset for ADC calibdation */
+    uint8_t reserved;
+} PageOne_t;
+
+typedef struct PageSeven {
+    uint8_t userByte0;
+    uint8_t userByte1;
+    uint8_t userByte2;
+    uint8_t userByte3;
+    uint8_t CCA0;   /**< Charging Current Accumulator (CCA) */
+    uint8_t CCA1;   /**< Charging Current Accumulator (CCA) */
+    uint8_t DCA0;   /**< Discharge Current Accumulator (DCA) */
+    uint8_t DCA1;   /**< Discharge Current Accumulator (DCA) */
+} PageSeven_t;
+
+typedef uint8_t DeviceAddress[8];
+
+class DS2438 {
+    public:
+        DS2438(OneWire *ow, float currentShunt, int retryOnCRCError);
+    
+        void begin();
+        void updateMultiple();
+        double getTemperature();
+        float getVoltage(int channel=DS2438_CHA);
+        float getCurrent();
+        long getICA();
+        long getCCA();
+        long getDCA();
+        float getAh();
+        boolean isError();
+        boolean isFound();
+    private:
+        bool validAddress(const uint8_t*);
+        bool validFamily(const uint8_t* deviceAddress);
+        void update(bool firstIteration);
+        bool deviceFound = false;
+        OneWire *_ow;
+        DeviceAddress _address;
+        uint8_t _mode;
+        RunningMedian _temperature = RunningMedian(DS2438_MEDIAN_COUNT*2);
+        RunningMedian _voltageA = RunningMedian(DS2438_MEDIAN_COUNT);
+        RunningMedian _voltageB = RunningMedian(DS2438_MEDIAN_COUNT);
+        RunningMedian _current = RunningMedian(DS2438_MEDIAN_COUNT);
+        float _currentShunt;
+        int _retryOnCRCError;
+        long _CCA;
+        long _DCA;
+        long _ICA;
+        boolean _error;
+        boolean startConversion(int channel, boolean doTemperature);
+        boolean selectChannel(int channel);
+        void writePage(int page, uint8_t *data);
+        boolean readPage(int page, uint8_t *data);
+};
+
+#endif

esp32/include/FileUtils.h

@@ -0,0 +1,9 @@
+#ifndef FILEUTILS_H
+#define FILEUTILS_H
+
+bool doesFileExist(const char *source);
+bool copyFile(const char *source, const char *target);
+bool deleteFile(const char *source);
+void printFile(const char *source);
+
+#endif

esp32/include/HomieConfiguration.h

@@ -19,55 +19,81 @@
 #define MAX_PLANTS 7
 
 /**
- * @name Attributes
+ * @name Homie Attributes
  * generated Information
  * @{
  **/
 
-#define NUMBER_TYPE                     "number"
-#define TEMPERATUR_SENSOR_LIPO          "lipo"
-#define TEMPERATUR_SENSOR_WATER         "water"
-#define TEMPERATUR_SENSOR_OUTSIDE       "temp"
+#define NUMBER_TYPE                     "Float"        /**< numberic information, published or read in Homie */
+
+/**
+ * @}
+ * 
+ * @name Temperatur Node
+ * @{
+ **/
+
 #define TEMPERATURE_NAME                "Temperature"
 #define TEMPERATURE_UNIT                "°C"
+#define TEMPERATUR_SENSOR_LIPO          "lipo"          /**< Homie node: temperatur, setting: lipo temperatur (or close to it) */
+#define TEMPERATUR_SENSOR_CHIP          "chip"          /**< Homie node: temperatur, setting: battery chip */
+#define TEMPERATUR_SENSOR_WATER         "water"         /**< Homie node: temperatur, setting: water temperatur */
+/** @} 
+ *
+ * @name Plant Nodes
+ * @{
+ */
 
 HomieNode plant0("plant0", "Plant 0", "Plant"); /**< dynamic Homie information for first plant */
 HomieNode plant1("plant1", "Plant 1", "Plant"); /**< dynamic Homie information for second plant */
-HomieNode plant2("plant2", "Plant 2", "Plant"); /**< dynamic Homie information for first plant */
-HomieNode plant3("plant3", "Plant 3", "Plant"); /**< dynamic Homie information for first plant */
-HomieNode plant4("plant4", "Plant 4", "Plant"); /**< dynamic Homie information for first plant */
-HomieNode plant5("plant5", "Plant 5", "Plant"); /**< dynamic Homie information for first plant */
-HomieNode plant6("plant6", "Plant 6", "Plant"); /**< dynamic Homie information for first plant */
+HomieNode plant2("plant2", "Plant 2", "Plant"); /**< dynamic Homie information for third plant */
+HomieNode plant3("plant3", "Plant 3", "Plant"); /**< dynamic Homie information for fourth plant */
+HomieNode plant4("plant4", "Plant 4", "Plant"); /**< dynamic Homie information for fivth plant */
+HomieNode plant5("plant5", "Plant 5", "Plant"); /**< dynamic Homie information for sixth plant */
+HomieNode plant6("plant6", "Plant 6", "Plant"); /**< dynamic Homie information for seventh plant */
+
+#if defined(TIMED_LIGHT_PIN)
+        HomieNode timedLightNode("timedLight", "TimedLight", "Status");
+#endif // TIMED_LIGHT_PIN
+ 
 
 HomieNode sensorLipo("lipo", "Battery Status", "Lipo");
 HomieNode sensorSolar("solar", "Solar Status", "Solarpanel");
 HomieNode sensorWater("water", "WaterSensor", "Water");
 HomieNode sensorTemp("temperature", "Temperature", "temperature");
-HomieNode startupReason("startupReason", "startupReason", "startupReason");
 HomieNode stayAlive("stay", "alive", "alive");  /**< Necessary for Mqtt Active Command */
 
-/* @} */
+/**
+ *  @} 
+ */
 
 /**
  * @name Settings
  * General settings for the controller
  * @{
  */
-HomieSetting<long> maxTimeBetweenMQTTUpdates("mqttSleep", "time in seconds to start into mode2");
-HomieSetting<long> deepSleepTime("deepsleep", "time in seconds to sleep (0 deactivats it)");
+HomieSetting<long> deepSleepTime("sleep", "time in seconds to sleep");
 HomieSetting<long> deepSleepNightTime("nightsleep", "time in seconds to sleep (0 uses same setting: deepsleep at night, too)");
-HomieSetting<long> wateringDeepSleep("pumpdeepsleep", "time seconds to sleep, while a pump is running");
-
-HomieSetting<long> waterLevelMax("watermaxlevel", "distance (mm) at maximum water level");
-HomieSetting<long> waterLevelMin("waterminlevel", "distance (mm) at minimum water level (pumps still covered)");
-HomieSetting<long> waterLevelWarn("waterlevelwarn", "warn (mm) if below this water level %");
-HomieSetting<long> waterLevelVol("waterVolume", "(ml) between minimum and maximum");
-HomieSetting<long> lipoSensorIndex("lipoTempIndex", "index onwire bus for lipo temperature sensor");
-HomieSetting<long> waterSensorIndex("waterTempIndex", "index onwire bus for water temperature sensor");
+HomieSetting<long> pumpIneffectiveWarning("pumpConsecutiveWarn", "if the pump was triggered this amount directly after each cooldown, without resolving dryness, warn");
+HomieSetting<long> waterLevelMax("tankmax", "distance (mm) at maximum water level");
+HomieSetting<long> waterLevelMin("tankmin", "distance (mm) at minimum water level (pumps still covered)");
+HomieSetting<long> waterLevelWarn("tankwarn", "warn (mm) if below this water level %");
+HomieSetting<long> waterLevelVol("tankVolume", "(ml) between minimum and maximum");
+HomieSetting<const char *> lipoSensorAddr("lipoDSAddr", "1wire address for lipo temperature sensor");
+HomieSetting<const char *> waterSensorAddr("tankDSAddr", "1wire address for water temperature sensor");
 HomieSetting<const char *> ntpServer("ntpServer", "NTP server (pool.ntp.org as default)");
 
+#if defined(TIMED_LIGHT_PIN)
+        HomieSetting<double> timedLightVoltageCutoff("LightVoltageCutoff", "voltage at wich to disable light");
+        HomieSetting<long> timedLightStart("LightStart", "hour to start light");
+        HomieSetting<long> timedLightEnd("LightEnd", "hour to end light");
+        HomieSetting<bool> timedLightOnlyWhenDark("LightOnlyDark", "only enable light, if solar is low");
+        HomieSetting<long> timedLightPowerLevel("LightPowerLevel", "0-255 power level");
+#endif // TIMED_LIGHT_PIN
+
+
 /**
- *@}
+ * @}
  */
 
 /** 
@@ -77,12 +103,15 @@ HomieSetting<const char *> ntpServer("ntpServer", "NTP server (pool.ntp.org as d
  **/
 
 #define GENERATE_PLANT(plant, strplant)                                                                                                                                                                        \
-        HomieSetting<long> mSensorDry##plant = HomieSetting<long>("moistdry" strplant, "Plant " strplant "- Moist sensor dry threshold");                                                                      \
-        HomieSetting<long> mPumpAllowedHourRangeStart##plant = HomieSetting<long>("rangehourstart" strplant, "Plant" strplant " - Range pump allowed hour start (0-23)");                                      \
-        HomieSetting<long> mPumpAllowedHourRangeEnd##plant = HomieSetting<long>("rangehourend" strplant, "Plant" strplant " - Range pump allowed hour end (0-23)");                                            \
-        HomieSetting<bool> mPumpOnlyWhenLowLight##plant = HomieSetting<bool>("onlyWhenLowLightZ" strplant, "Plant" strplant " - Enable the Pump only, when there is light but not enought to charge battery"); \
-        HomieSetting<long> mPumpCooldownInHours##plant = HomieSetting<long>("cooldownpump" strplant, "Plant" strplant " - How long to wait until the pump is activated again (minutes)");                      \
-        PlantSettings_t mSetting##plant = {&mSensorDry##plant, &mPumpAllowedHourRangeStart##plant, &mPumpAllowedHourRangeEnd##plant, &mPumpOnlyWhenLowLight##plant, &mPumpCooldownInHours##plant}; \
+        HomieSetting<double> mSensorDry##plant = HomieSetting<double>("dry" strplant, "Plant" strplant " - Moist sensor dry %");                                                                      \
+        HomieSetting<long> mPumpAllowedHourRangeStart##plant = HomieSetting<long>("hourstart" strplant, "Plant" strplant " - Range pump allowed hour start (0-23)");                                      \
+        HomieSetting<long> mPumpAllowedHourRangeEnd##plant = HomieSetting<long>("hourend" strplant, "Plant" strplant " - Range pump allowed hour end (0-23)");                                            \
+        HomieSetting<bool> mPumpOnlyWhenLowLight##plant = HomieSetting<bool>("lowLight" strplant, "Plant" strplant " - Enable the Pump only, when there is no sunlight"); \
+        HomieSetting<long> mPumpCooldownInSeconds##plant = HomieSetting<long>("delay" strplant, "Plant" strplant " - How long to wait until the pump is activated again (sec)");                      \
+        HomieSetting<long> pPumpDuration##plant = HomieSetting<long>("pumpDuration" strplant, "Plant" strplant " - time seconds to water when pump is active");                      \
+        HomieSetting<long> pPumpMl##plant = HomieSetting<long>("pumpAmount" strplant, "Plant" strplant " - ml (if using flowmeter) to water when pump is active");                      \
+        HomieSetting<long> pPowerLevel##plant = HomieSetting<long>("powerLevel" strplant, "Plant" strplant " - pwm duty cycle in percent");                      \
+        PlantSettings_t mSetting##plant = {&mSensorDry##plant, &mPumpAllowedHourRangeStart##plant, &mPumpAllowedHourRangeEnd##plant, &mPumpOnlyWhenLowLight##plant, &mPumpCooldownInSeconds##plant, &pPumpDuration##plant, &pPowerLevel##plant, &pPumpMl##plant}; \
         /**< Generate all settings for one plant \
          * \
          * Feature to start pumping only at morning: @link{SOLAR_CHARGE_MIN_VOLTAGE} and @link{SOLAR_CHARGE_MAX_VOLTAGE} \
@@ -100,4 +129,7 @@ GENERATE_PLANT(4, "4"); /**< Homie settings for fifth plant */
 GENERATE_PLANT(5, "5"); /**< Homie settings for sixth plant */
 GENERATE_PLANT(6, "6"); /**< Homie settings for seventh plant */
 
-#endif /* HOMIE_PLANT_CONFIG_H @} */
+
+
+#endif /* HOMIE_PLANT_CONFIG_H @} */
+

esp32/include/HomieTypes.h

@@ -13,16 +13,83 @@
 
 #include <Homie.h>
 
-#define DEACTIVATED_PLANT 5000
-#define MISSING_SENSOR 5001
+/**
+ * @name Sensor types
+ * possible sensors:
+ * @{
+ **/
+
+#define FOREACH_SENSOR(SENSOR) \
+        SENSOR(NONE)   \
+        SENSOR(FREQUENCY_MOD_RESISTANCE_PROBE)  \
+        SENSOR(ANALOG_RESISTANCE_PROBE)   
+
+/**
+ * @}
+ */
+
+#define GENERATE_ENUM(ENUM) ENUM,
+#define GENERATE_STRING(STRING) #STRING,
+
+enum SENSOR_MODE {
+    FOREACH_SENSOR(GENERATE_ENUM)
+};
+
+static const char *SENSOR_STRING[] = {
+    FOREACH_SENSOR(GENERATE_STRING)
+};
+
+//plant pump is deactivated, but sensor values are still recorded and published
+#define DEACTIVATED_PLANT -1
+//special value to indicate a missing sensor when the plant is not deactivated but no valid sensor value was read
+#define MISSING_SENSOR -2
+//plant uses only cooldown and duration, moisture is measured but ignored, allowedHours is ignored (eg. make a 30min on 30min off cycle)
+#define HYDROPONIC_MODE -3
+//plant uses cooldown and duration and workhours, moisture is measured but ignored
+#define TIMER_ONLY -4
+//special value to indicate a shorted sensor when the plant is not deactivated but the sensor reads short circuit value
+#define SHORT_CIRCUIT_MODE -5
+
+/**
+ * @brief State of plants
+ * 
+ */
+#define PLANTSTATE_NUM_DEACTIVATED      -1
+#define PLANTSTATE_NUM_NO_SENSOR        -2
+#define PLANTSTATE_NUM_WET              0x00
+#define PLANTSTATE_NUM_SUNNY_ALARM      0x11
+#define PLANTSTATE_NUM_ACTIVE_ALARM     0x41
+#define PLANTSTATE_NUM_ACTIVE_SUPESSED  -3
+#define PLANTSTATE_NUM_ACTIVE           0x40
+#define PLANTSTATE_NUM_SUNNY            0x10
+#define PLANTSTATE_NUM_COOLDOWN_ALARM   0x21
+#define PLANTSTATE_NUM_COOLDOWN         0x20
+#define PLANTSTATE_NUM_AFTERWORK_ALARM  0x31
+#define PLANTSTATE_NUM_AFTERWORK        0x30
+
+#define PLANTSTATE_STR_DEACTIVATED      "deactivated"
+#define PLANTSTATE_STR_NO_SENSOR        "nosensor"
+#define PLANTSTATE_STR_WET              "wet"
+#define PLANTSTATE_STR_SUNNY_ALARM      "sunny+alarm"
+#define PLANTSTATE_STR_ACTIVE_ALARM     "active+alarm"
+#define PLANTSTATE_STR_ACTIVE_SUPESSED  "active+supressed"
+#define PLANTSTATE_STR_ACTIVE           "active"
+#define PLANTSTATE_STR_SUNNY            "sunny"
+#define PLANTSTATE_STR_COOLDOWN_ALARM   "cooldown+alarm"
+#define PLANTSTATE_STR_COOLDOWN         "cooldown"
+#define PLANTSTATE_STR_AFTERWORK_ALARM  "after-work+alarm"
+#define PLANTSTATE_STR_AFTERWORK        "after-work"
 
 typedef struct PlantSettings_t
 {
-    HomieSetting<long> *pSensorDry;
+    HomieSetting<double> *pSensorDry;
     HomieSetting<long> *pPumpAllowedHourRangeStart;
     HomieSetting<long> *pPumpAllowedHourRangeEnd;
     HomieSetting<bool> *pPumpOnlyWhenLowLight;
-    HomieSetting<long> *pPumpCooldownInHours;
+    HomieSetting<long> *pPumpCooldownInSeconds;
+    HomieSetting<long> *pPumpDuration;
+    HomieSetting<long> *pPumpPowerLevel;
+    HomieSetting<long> *pPumpMl;
 } PlantSettings_t;
 
 #endif

esp32/include/LogDefines.h

@@ -0,0 +1,50 @@
+#ifndef LOG_DEFINES_H
+#define LOG_DEFINES_H
+
+#define LOG_LEVEL_ERROR 0
+#define LOG_LEVEL_WARN 1
+#define LOG_LEVEL_INFO 2
+#define LOG_LEVEL_DEBUG 3
+
+
+#define LOG_TANKSENSOR_FAIL_DETECT "Failed to detect and initialize distance sensor!"
+#define LOG_TANKSENSOR_FAIL_DETECT_CODE -1
+
+#define LOG_BACKUP_SUCCESSFUL "Backup sucessful"
+#define LOG_BACKUP_SUCCESSFUL_CODE 1
+
+#define LOG_BACKUP_FAILED "Backup error"
+#define LOG_BACKUP_FAILED_CODE -2
+
+#define LOG_PUMP_BUTNOTANK_MESSAGE "Want to pump but no water"
+#define LOG_PUMP_BUTNOTANK_CODE -3
+
+#define LOG_HARDWARECOUNTER_ERROR_MESSAGE "PCNR returned error"
+#define LOG_HARDWARECOUNTER_ERROR_CODE -4
+
+#define LOG_SENSORMODE_UNKNOWN "Unknown sensor mode requested"
+#define LOG_SENSORMODE_UNKNOWN_CODE -5
+
+#define LOG_SENSOR_MISSING -6
+
+#define LOG_PUMP_AND_DOWNLOADMODE "Download mode, ignoring pump request"
+#define LOG_PUMP_AND_DOWNLOADMODE_CODE 2
+
+#define LOG_VERY_COLD_WATER "Water potentially frozen, ignoring pump request"
+#define LOG_VERY_COLD_WATER_CODE -7
+
+#define LOG_PUMP_FULLTANK_MESSAGE "Water Sensor distance unrealistic"
+#define LOG_PUMP_FULLTANK_CODE 3
+
+//msg is dynamic defined
+#define LOG_PUMP_INEFFECTIVE -4
+#define LOG_PUMP_STARTED_CODE 10
+#define LOG_DEBUG_CODE 1001
+#define LOG_SLEEP_NIGHT 100
+#define LOG_SLEEP_DAY 101
+#define LOG_SLEEP_LOWVOLTAGE 502
+#define LOG_SLEEP_CYCLE 102
+#define LOG_MISSING_PUMP -4
+#define LOG_BOOT_ERROR_DETECTION 10000
+#define LOG_SOLAR_CHARGER_MISSING 300
+#endif

esp32/include/MQTTUtils.h

@@ -0,0 +1,28 @@
+#ifndef MQTTUtils_h
+#define MQTTUtils_h
+
+#include <Homie.h>
+
+#define LOG_TOPIC "log\0"
+#define TEST_TOPIC "roundtrip\0"
+#define BACKUP_TOPIC "$implementation/config/backup/set\0"
+
+#define CONFIG_FILE "/homie/config.json"
+#define CONFIG_FILE_BACKUP "/homie/config.json.bak"
+
+#define getTopic(test, topic)                                                                                                                 \
+  char *topic = new char[strlen(Homie.getConfiguration().mqtt.baseTopic) + strlen(Homie.getConfiguration().deviceId) + 1 + strlen(test) + 1]; \
+  strcpy(topic, Homie.getConfiguration().mqtt.baseTopic);                                                                                     \
+  strcat(topic, Homie.getConfiguration().deviceId);                                                                                           \
+  strcat(topic, "/");                                                                                                                         \
+  strcat(topic, test);
+
+bool aliveWasRead();
+bool mqttReady();
+void startMQTTRoundtripTest();
+
+void log(int level, String message, int code);
+void mqttWrite(HomieNode* target,const char* key, String value);
+void mqttWrite(HomieNode* target,String key, String value);
+
+#endif

esp32/include/MathUtils.h

@@ -0,0 +1,8 @@
+#ifndef MATHUTILS_H
+#define MATHUTILS_H
+
+
+bool equalish(double x, double y);
+double mapf(double x, double in_min, double in_max, double out_min, double out_max);
+
+#endif

esp32/include/PlantCtrl.h

@@ -4,83 +4,119 @@
  * @brief Abstraction to handle the Sensors
  * @version 0.1
  * @date 2020-05-27
- * 
+ *
  * @copyright Copyright (c) 2020
- * 
+ *
  */
 
 #ifndef PLANT_CTRL_H
 #define PLANT_CTRL_H
 
 #include "HomieTypes.h"
+#include <HomieNode.hpp>
+#include "ControllerConfiguration.h"
 #include "RunningMedian.h"
+#include "MathUtils.h"
+#include "MQTTUtils.h"
+#include "LogDefines.h"
+
+#define ANALOG_REREADS 5
+#define MOISTURE_MEASUREMENT_DURATION 400 /** ms */
+#define PWM_FREQ 50000
+#define PWM_BITS 8
 
 class Plant
 {
 
 private:
-    RunningMedian moistureRaw = RunningMedian(5);
     HomieNode *mPlant = NULL;
+    HomieInternals::PropertyInterface mPump;
+    RunningMedian mMoisture_raw = RunningMedian(ANALOG_REREADS);
+    RunningMedian mTemperature_degree = RunningMedian(ANALOG_REREADS);
     int mPinSensor = 0; /**< Pin of the moist sensor */
     int mPinPump = 0;   /**< Pin of the pump */
     bool mConnected = false;
     int mPlantId = -1;
+    SENSOR_MODE mSensorMode;
+
 
 public:
     PlantSettings_t *mSetting;
     /**
      * @brief Construct a new Plant object
-     * 
+     *
      * @param pinSensor Pin of the Sensor to use to measure moist
      * @param pinPump   Pin of the Pump to use
      */
     Plant(int pinSensor, int pinPump,
           int plantId,
           HomieNode *plant,
-          PlantSettings_t *setting);
+          PlantSettings_t *setting, SENSOR_MODE mode);
 
     void postMQTTconnection(void);
 
     void advertise(void);
 
-    /**
-     * @brief Measure a new analog moister value
-     * 
-     */
-    void addSenseValue(void);
+    // for sensor that might take any time
+    void blockingMoistureMeasurement(void);
+    // for sensor that need a start and a end in defined timing
+    void startMoistureMeasurement(void);
+    void stopMoistureMeasurement(void);
 
     void deactivatePump(void);
 
     void activatePump(void);
 
+    String getSensorModeString()
+    {
+        SENSOR_MODE mode = getSensorMode();
+        return SENSOR_STRING[mode];
+    }
+
+    bool isTimerOnly()
+    {
+        long current = this->mSetting->pSensorDry->get();
+        return equalish(current, TIMER_ONLY);
+    }
+
+    bool isHydroponic()
+    {
+        long current = this->mSetting->pSensorDry->get();
+        return equalish(current, HYDROPONIC_MODE);
+    }
+
+    SENSOR_MODE getSensorMode()
+    {
+        return mSensorMode;
+    }
+
     /**
      * @brief Check if a plant is too dry and needs some water.
-     * 
-     * @return true 
-     * @return false 
+     *
+     * @return true
+     * @return false
      */
     bool isPumpRequired()
     {
-        bool isDry = getCurrentMoisture() > getSettingsMoisture();
+        if (isHydroponic() || isTimerOnly())
+        {
+            // hydroponic only uses timer based controll
+            return true;
+        }
+        bool isDry = getCurrentMoisturePCT() < getTargetMoisturePCT();
         bool isActive = isPumpTriggerActive();
         return isDry && isActive;
     }
 
     bool isPumpTriggerActive()
     {
-        return this->mSetting->pSensorDry->get() != DEACTIVATED_PLANT;
+        long current = this->mSetting->pSensorDry->get();
+        return !equalish(current, DEACTIVATED_PLANT);
     }
 
-    float getCurrentMoisture()
-    {   
-        if(moistureRaw.getCount()==0){
-            return MISSING_SENSOR;
-        }
-        return this->moistureRaw.getMedian();
-    }
-    long getSettingsMoisture()
+    float getTargetMoisturePCT()
     {
-        if (this->mSetting->pSensorDry != NULL)
+        if (isPumpTriggerActive())
         {
             return this->mSetting->pSensorDry->get();
         }
@@ -90,37 +126,95 @@ public:
         }
     }
 
+    float getCurrentMoisturePCT()
+    {
+        switch (getSensorMode())
+        {
+        case NONE:
+            return DEACTIVATED_PLANT;
+        case FREQUENCY_MOD_RESISTANCE_PROBE:
+            return mapf(mMoisture_raw.getMedian(), MOIST_SENSOR_MIN_FRQ, MOIST_SENSOR_MAX_FRQ, 0, 100);
+        case ANALOG_RESISTANCE_PROBE:
+            return mapf(mMoisture_raw.getMedian(), ANALOG_SENSOR_MAX_MV, ANALOG_SENSOR_MIN_MV, 0, 100);
+        }
+        return MISSING_SENSOR;
+    }
+
+    float getCurrentMoistureRaw()
+    {
+        if (getSensorMode() == FREQUENCY_MOD_RESISTANCE_PROBE)
+        {
+            if (mMoisture_raw.getMedian() < MOIST_SENSOR_MIN_FRQ)
+            {
+                return MISSING_SENSOR;
+            }
+            else if (mMoisture_raw.getMedian() > MOIST_SENSOR_MAX_FRQ)
+            {
+                return SHORT_CIRCUIT_MODE;
+            }
+        }
+
+        return mMoisture_raw.getMedian();
+    }
+
     HomieInternals::SendingPromise &setProperty(const String &property) const
     {
         return mPlant->setProperty(property);
     }
-    bool switchHandler(const HomieRange &range, const String &value);
 
     void init(void);
+    void initSensors(void);
 
-    /** @fn  bool isInCooldown(long sinceLastActivation)
-     *  @brief determine, if the plant was recently casted
-     *  @param sinceLastActivation timestamp of last time
-     */
-    bool isInCooldown(long sinceLastActivation)
+    long getCooldownInSeconds()
     {
-        /* if the time difference is greater than one month, we know these are initial values */
-        if (sinceLastActivation > (60 * 60 * 24 * 30))
-        {
-            return false;
-        }
-
-        return (getCooldownInSeconds() > sinceLastActivation);
+        return this->mSetting->pPumpCooldownInSeconds->get();
     }
 
-    long getCooldownInSeconds(){
-        return this->mSetting->pPumpCooldownInHours->get()*60*60;
+    /**
+     * @brief Get the Hours when pumping should start
+     *
+     * @return hour
+     */
+    int getHoursStart()
+    {
+        return this->mSetting->pPumpAllowedHourRangeStart->get();
+    }
+
+    /**
+     * @brief Get the Hours when pumping should end
+     *
+     * @return hour
+     */
+    int getHoursEnd()
+    {
+        return this->mSetting->pPumpAllowedHourRangeEnd->get();
     }
 
     bool isAllowedOnlyAtLowLight(void)
     {
+        if (this->isHydroponic())
+        {
+            return false;
+        }
         return this->mSetting->pPumpOnlyWhenLowLight->get();
     }
+
+    void publishState(int stateNumber, String stateString);
+
+    bool switchHandler(const HomieRange &range, const String &value);
+
+    void setSwitchHandler(HomieInternals::PropertyInputHandler f);
+
+    long getPumpDuration()
+    {
+        return this->mSetting->pPumpDuration->get();
+    }
+    long getPumpMl()
+    {
+        return this->mSetting->pPumpMl->get();
+    }
+
+    
 };
 
 #endif

esp32/include/TimeUtils.h

@@ -0,0 +1,4 @@
+#pragma once
+
+long getCurrentTime(void);
+int getCurrentHour(void);

esp32/include/ulp-pwm.h

@@ -0,0 +1,177 @@
+#ifndef ULP_PWM_h
+#define ILP_PWM_h
+
+#include <Arduino.h>
+#include "driver/rtc_io.h"
+#include "soc/rtc_cntl_reg.h"
+#include "soc/rtc.h"
+#include "esp32/ulp.h"
+#include "ControllerConfiguration.h"
+
+#define LBL_START 1
+#define LBL_DELAY_ON 2
+#define LBL_DELAY_OFF 3
+#define LBL_SKIP_ON 4
+#define LBL_SKIP_OFF 5
+#define REGISTER_DELAY_LOOP_COUNTER R0
+#define REGISTER_TICKS_ON R1
+#define REGISTER_TICKS_OFF R2
+#define TOTAL_TICKS_DELAY 255
+#define PIN TIMED_LIGHT_PIN
+
+//support 20 vars
+const size_t ulp_var_offset = CONFIG_ULP_COPROC_RESERVE_MEM - 20;
+//use the first for dimming
+const size_t ulp_dimm_offset = ulp_var_offset + 1;
+const size_t ulp_alive_offset = ulp_var_offset + 2;
+
+//see https://github.com/perseus086/ESP32-notes
+const uint32_t rtc_bit[40] = {
+    25, //gpio0
+    0,  //gpio1
+    26, //gpio2
+    0,  //gpio3
+    24, //gpio4
+    0,  //gpio5
+    0,  //gpio6
+    0,  //gpio7
+    0,  //gpio8
+    0,  //gpio9
+    0,  //gpio10
+    0,  //gpio11
+    29, //gpio12
+    28, //gpio13
+    30, //gpio14
+    27, //gpio15
+    0,  //gpio16
+    31, //gpio17
+    0,  //gpio18
+    0,  //gpio19
+    0,  //gpio20
+    0,  //gpio21
+    0,  //gpio22
+    0,  //gpio23
+    0,  //gpio24
+    20, //gpio25
+    21, //gpio26
+    0,  //gpio27
+    0,  //gpio28
+    0,  //gpio29
+    0,  //gpio30
+    0,  //gpio31
+    23, //gpio32
+    22, //gpio33
+    18, //gpio34
+    19, //gpio35
+    14, //gpio36
+    15, //gpio37
+    16, //gpio38
+    17  //gpio39
+};
+
+static inline void ulp_internal_data_write(size_t offset, uint16_t value)
+{
+    if (offset >= CONFIG_ULP_COPROC_RESERVE_MEM || offset <= ulp_var_offset)
+    {
+        Serial.print("Invalid ULP offset detected, refusing write!");
+        Serial.print(offset);
+        Serial.print("-");
+        Serial.print(ulp_var_offset);
+        Serial.print("-");
+        Serial.println(CONFIG_ULP_COPROC_RESERVE_MEM);
+        return;
+    }
+    else
+    {
+        RTC_SLOW_MEM[offset] = value;
+    }
+}
+
+static inline uint16_t ulp_internal_data_read(size_t offset)
+{
+    if (offset >= CONFIG_ULP_COPROC_RESERVE_MEM || offset <= ulp_var_offset)
+    {
+        Serial.print("Invalid ULP offset detected");
+        Serial.print(offset);
+        Serial.print("-");
+        Serial.print(ulp_var_offset);
+        Serial.print("-");
+        Serial.println(CONFIG_ULP_COPROC_RESERVE_MEM);
+    }
+    return RTC_SLOW_MEM[offset] & 0xffff;
+}
+
+void ulp_internal_start(void)
+{
+    rtc_gpio_init(PIN);
+    rtc_gpio_set_direction(PIN, RTC_GPIO_MODE_OUTPUT_ONLY);
+    rtc_gpio_set_level(PIN, 0);
+    const uint32_t rtc_gpio = rtc_io_number_get(PIN);
+
+    // Define ULP program
+    const ulp_insn_t ulp_prog[] = {
+        M_LABEL(LBL_START),
+
+        I_MOVI(REGISTER_DELAY_LOOP_COUNTER, 1),
+        I_MOVI(REGISTER_TICKS_ON, 0),
+        I_ST(REGISTER_DELAY_LOOP_COUNTER, REGISTER_TICKS_ON, ulp_alive_offset), //store 1 with 0 offset into alive
+
+        I_LD(REGISTER_TICKS_ON, REGISTER_TICKS_ON, ulp_dimm_offset), //REGISTER_TICKS_ON = RTC_DATA[0+ulp_dimm_offset]
+        //in total there is always 255 delay loop iterations, but in different duty cycle
+        I_MOVI(REGISTER_TICKS_OFF, TOTAL_TICKS_DELAY),
+        I_SUBR(REGISTER_TICKS_OFF, REGISTER_TICKS_OFF, REGISTER_TICKS_ON),
+
+        //on phase
+        I_MOVR(REGISTER_DELAY_LOOP_COUNTER, REGISTER_TICKS_ON),
+        M_BL(LBL_SKIP_ON, 1),                                 //if never on, skip on phase
+        I_WR_REG(RTC_GPIO_OUT_REG, rtc_gpio, rtc_gpio, HIGH), // on
+        M_LABEL(LBL_DELAY_ON),
+        I_DELAY(1),                                                          //wait 1 clock
+        I_SUBI(REGISTER_DELAY_LOOP_COUNTER, REGISTER_DELAY_LOOP_COUNTER, 1), // REGISTER_DELAY_LOOP_COUNTER--
+        M_BGE(LBL_DELAY_ON, 1),                                              //if time left, goto start of on loop
+        M_LABEL(LBL_SKIP_ON),
+
+        //off phase
+        I_MOVR(REGISTER_DELAY_LOOP_COUNTER, REGISTER_TICKS_OFF),
+
+        M_BL(LBL_SKIP_OFF, 1),                               //if never off, skip on phase
+        I_WR_REG(RTC_GPIO_OUT_REG, rtc_gpio, rtc_gpio, LOW), // on
+        M_LABEL(3),
+        I_DELAY(1),                                                          //wait 1 clock
+        I_SUBI(REGISTER_DELAY_LOOP_COUNTER, REGISTER_DELAY_LOOP_COUNTER, 1), // REGISTER_DELAY_LOOP_COUNTER--
+        M_BGE(3, 1),                                                         //if time left, goto start of on loop
+        M_LABEL(LBL_SKIP_OFF),
+
+        M_BX(LBL_START),
+    };
+    // Run ULP program
+    size_t size = sizeof(ulp_prog) / sizeof(ulp_insn_t);
+    assert(size < ulp_var_offset && "ULP_DATA_OFFSET needs to be greater or equal to the program size");
+    esp_err_t error = ulp_process_macros_and_load(0, ulp_prog, &size);
+    Serial.print("ULP bootstrap status ");
+    Serial.println(error);
+
+    //allow glitchless start
+    ulp_internal_data_write(ulp_alive_offset, 0);
+
+    error = ulp_run(0);
+    Serial.print("ULP start status ");
+    Serial.println(error);
+}
+
+static inline void ulp_pwm_set_level(uint8_t level)
+{
+    ulp_internal_data_write(ulp_dimm_offset, level);
+}
+
+static inline void ulp_pwm_init()
+{
+    ulp_internal_data_write(ulp_alive_offset, 0);
+    delay(10);
+    if (ulp_internal_data_read(ulp_alive_offset) == 0)
+    {
+        ulp_internal_start();
+    }
+}
+
+#endif

esp32/platformio.ini

@@ -9,18 +9,32 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [env:esp32doit-devkit-v1]
-platform = espressif32
+platform = espressif32@6.3.2
 board = esp32doit-devkit-v1
 framework = arduino
 build_flags = -DPIO_FRAMEWORK_ARDUINO_LWIP2_LOW_MEMORY
+    -DPLANT0_SENSORTYPE=FREQUENCY_MOD_RESISTANCE_PROBE
+    -DPLANT1_SENSORTYPE=FREQUENCY_MOD_RESISTANCE_PROBE
+    -DPLANT2_SENSORTYPE=FREQUENCY_MOD_RESISTANCE_PROBE
+    -DPLANT3_SENSORTYPE=FREQUENCY_MOD_RESISTANCE_PROBE
+    -DPLANT4_SENSORTYPE=FREQUENCY_MOD_RESISTANCE_PROBE
+    -DPLANT5_SENSORTYPE=FREQUENCY_MOD_RESISTANCE_PROBE
+    -DPLANT6_SENSORTYPE=FREQUENCY_MOD_RESISTANCE_PROBE
+    -DTIMED_LIGHT_PIN=CUSTOM1_PIN5
+    -DFLOWMETER_PIN=CUSTOM1_PIN1
+
 board_build.partitions = defaultWithSmallerSpiffs.csv
 
+;#https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/partition-tables.html
+
+
 ; the latest development brankitchen-lightch (convention V3.0.x) 
-lib_deps = ArduinoJson@6.16.1
-            https://github.com/homieiot/homie-esp8266.git#v3.0
-            OneWire
-            DallasTemperature
+lib_deps = bblanchon/ArduinoJson@^6.20.1
+            paulstoffregen/OneWire@^2.3.6
+            milesburton/DallasTemperature@^3.11.0
+            pololu/VL53L0X@^1.3.1
+            https://github.com/homieiot/homie-esp8266.git#develop
 
 [platformio]
 
-extra_configs = custom_platformio.ini
+extra_configs = custom_platformio.ini

esp32/src/CMakeLists.txt

@@ -0,0 +1,6 @@
+# This file was automatically generated for projects
+# without default 'CMakeLists.txt' file.
+
+FILE(GLOB_RECURSE app_sources ${CMAKE_SOURCE_DIR}/src/*.*)
+
+idf_component_register(SRCS ${app_sources})

esp32/src/DS2438.cpp

@@ -0,0 +1,272 @@
+/*
+ *   DS2438.cpp
+ *
+ *   by Joe Bechter
+ *
+ *   (C) 2012, bechter.com
+ *
+ *   All files, software, schematics and designs are provided as-is with no warranty.
+ *   All files, software, schematics and designs are for experimental/hobby use.
+ *   Under no circumstances should any part be used for critical systems where safety,
+ *   life or property depends upon it. You are responsible for all use.
+ *   You are free to use, modify, derive or otherwise extend for your own non-commercial purposes provided
+ *       1. No part of this software or design may be used to cause injury or death to humans or animals.
+ *       2. Use is non-commercial.
+ *       3. Credit is given to the author (i.e. portions © bechter.com), and provide a link to the original source.
+ *
+ */
+
+#include "DS2438.h"
+
+// DSROM FIELDS
+#define DSROM_FAMILY    0
+#define DSROM_CRC       7
+
+#define DS2438MODEL     0x26
+
+DS2438::DS2438(OneWire *ow, float currentShunt, int retryOnCRCError) {
+    _ow = ow;
+    _currentShunt = currentShunt;
+    _retryOnCRCError = retryOnCRCError;
+};
+
+void DS2438::begin(){
+    DeviceAddress searchDeviceAddress;
+
+	_ow->reset_search();
+    memset(searchDeviceAddress,0, 8);
+    _temperature.clear();
+    _voltageA.clear();
+    _voltageB.clear();
+    _error = true;
+    _mode = (DS2438_MODE_CHA | DS2438_MODE_CHB | DS2438_MODE_TEMPERATURE);
+
+	deviceFound = false; // Reset the number of devices when we enumerate wire devices
+
+	while (_ow->search(searchDeviceAddress)) {
+		if (validAddress(searchDeviceAddress)) {
+			if (validFamily(searchDeviceAddress)) {
+                memcpy(_address,searchDeviceAddress,8);
+                DEFAULT_PAGE0(defaultConfig);
+                writePage(0, defaultConfig);
+                deviceFound = true;
+			}
+		}
+	}
+}
+
+bool DS2438::isFound(){
+    return deviceFound;
+}
+
+bool DS2438::validAddress(const uint8_t* deviceAddress) {
+	return (_ow->crc8(deviceAddress, 7) == deviceAddress[DSROM_CRC]);
+}
+
+bool DS2438::validFamily(const uint8_t* deviceAddress) {
+	switch (deviceAddress[DSROM_FAMILY]) {
+	case DS2438MODEL:
+		return true;
+	default:
+		return false;
+	}
+}
+
+void DS2438::updateMultiple(){
+    for(int i = 0;i< DS2438_MEDIAN_COUNT; i++){
+        update(i==0);
+        if(_error){
+            return;
+        }
+        delay(DS2438_MEDIAN_DELAY);
+    }
+}
+
+void DS2438::update(bool firstIteration) {
+    uint8_t data[9];
+    _error = true;
+    
+    if(!isFound()){
+        return;
+    }
+
+    if (_mode & DS2438_MODE_CHA || _mode == DS2438_MODE_TEMPERATURE) {
+        boolean doTemperature = _mode & DS2438_MODE_TEMPERATURE;
+        if (!startConversion(DS2438_CHA, doTemperature)) {
+            Serial.println("Error starting temp conversion ds2438 channel a");
+            return;
+        }
+        if (!readPage(0, data)){
+            
+            Serial.println("Error reading zero page ds2438 channel a");
+            return;
+        }
+            
+        if (doTemperature) {
+            _temperature.add((double)(((((int16_t)data[2]) << 8) | (data[1] & 0x0ff)) >> 3) * 0.03125);
+        }
+        if (_mode & DS2438_MODE_CHA) {
+            _voltageA.add((((data[4] << 8) & 0x00300) | (data[3] & 0x0ff)) / 100.0);
+        }
+    }
+    if (_mode & DS2438_MODE_CHB) {
+        boolean doTemperature = _mode & DS2438_MODE_TEMPERATURE && !(_mode & DS2438_MODE_CHA);
+        if (!startConversion(DS2438_CHB, doTemperature)) {
+            Serial.println("Error starting temp conversion channel b ds2438");
+            return;
+        }
+        if (!readPage(0, data)){
+            Serial.println("Error reading zero page ds2438 channel b");
+            return;
+        }
+        if (doTemperature) {
+            int16_t upperByte = ((int16_t)data[2]) << 8;
+            int16_t lowerByte = data[1] >> 3;
+            int16_t fullByte = (upperByte | lowerByte);
+            _temperature.add(((double)fullByte) * 0.03125);
+        }
+        _voltageB.add((((data[4] << 8) & 0x00300) | (data[3] & 0x0ff)) / 100.0);
+    }
+    
+    int16_t upperByte = ((int16_t)data[6]) << 8;
+    int16_t lowerByte = data[5];
+    int16_t fullByte = (int16_t)(upperByte | lowerByte);
+    float fullByteb = fullByte;
+    _current.add((fullByteb) / ((4096.0f * _currentShunt)));
+
+
+    if(firstIteration){
+        if (readPage(1, data)){
+            PageOne_t *pOne = (PageOne_t *) data;
+            _ICA = pOne->ICA;
+        }
+
+        if (readPage(7, data)){
+            PageSeven_t *pSeven = (PageSeven_t *) data;
+            _CCA = pSeven->CCA0 | ((int16_t) pSeven->CCA1) << 8;
+            _DCA = pSeven->DCA0 | ((int16_t) pSeven->DCA1) << 8;
+        }
+    }
+    _error = false;
+}
+
+double DS2438::getTemperature() {
+    return _temperature.getMedian();
+}
+
+float DS2438::getAh(){
+    return _ICA / (2048.0f * _currentShunt);
+}
+
+long DS2438::getICA(){
+    return _ICA;
+}
+
+long DS2438::getDCA(){
+    return _DCA;
+}
+
+long DS2438::getCCA(){
+    return _CCA;
+}
+
+
+float DS2438::getVoltage(int channel) {
+    if (channel == DS2438_CHA) {
+        return _voltageA.getMedian();
+    } else if (channel == DS2438_CHB) {
+        return _voltageB.getMedian();
+    } else {
+        return 0.0;
+    }
+}
+
+float DS2438::getCurrent() {
+    return _current.getMedian();
+}
+
+boolean DS2438::isError() {
+    return _error;
+}
+
+boolean DS2438::startConversion(int channel, boolean doTemperature) {
+    if(!isFound()){
+        return false;
+    }
+    if (!selectChannel(channel)){
+        return false;
+    }
+    _ow->reset();
+    _ow->select(_address);
+    if (doTemperature) {
+        _ow->write(DS2438_TEMPERATURE_CONVERSION_COMMAND, 0);
+        delay(DS2438_TEMPERATURE_DELAY);
+        _ow->reset();
+        _ow->select(_address);
+    }
+    _ow->write(DS2438_VOLTAGE_CONVERSION_COMMAND, 0);
+    delay(DS2438_VOLTAGE_CONVERSION_DELAY);
+    return true;
+}
+
+boolean DS2438::selectChannel(int channel) {
+    if(!isFound()){
+        return false;
+    }
+    uint8_t data[9];
+    if (readPage(0, data)) {
+        if (channel == DS2438_CHB){
+            data[0] = data[0] | 0x08;
+        }
+        else {
+            data[0] = data[0] & 0xf7;
+        }
+        writePage(0, data);
+        return true;
+    }
+    Serial.println("Could not read page zero data");
+    return false;
+}
+
+void DS2438::writePage(int page, uint8_t *data) {
+    _ow->reset();
+    _ow->select(_address);
+    _ow->write(DS2438_WRITE_SCRATCHPAD_COMMAND, 0);
+    if ((page >= PAGE_MIN) && (page <= PAGE_MAX)) {
+        _ow->write(page, 0);
+    } else {
+        return;
+    }
+    for (int i = 0; i < 8; i++){
+        _ow->write(data[i], 0);
+    }
+    _ow->reset();
+    _ow->select(_address);
+    _ow->write(DS2438_COPY_SCRATCHPAD_COMMAND, 0);
+    _ow->write(page, 0);
+}
+
+boolean DS2438::readPage(int page, uint8_t *data) {
+    bool valid = false;
+    for(int retry = 0;retry < this->_retryOnCRCError && !valid; retry ++){
+        //TODO if all data is 0 0 is a valid crc, but most likly not as intended
+        _ow->reset();
+        _ow->select(_address);
+        _ow->write(DS2438_RECALL_MEMORY_COMMAND, 0);
+        if ((page >= PAGE_MIN) && (page <= PAGE_MAX)) {
+            _ow->write(page, 0);
+        } else {
+            return false;
+        }
+        _ow->reset();
+        _ow->select(_address);
+        _ow->write(DS2438_READ_SCRATCHPAD_COMMAND, 0);
+        _ow->write(page, 0);
+        for (int i = 0; i < 9; i++){
+            data[i] = _ow->read();
+        }
+        valid = _ow->crc8(data, 8) == data[8];
+    }
+    return valid;
+}
+

esp32/src/FileUtils.cpp

@@ -0,0 +1,81 @@
+#include <Homie.h>
+#include "FileUtils.h"
+
+bool deleteFile(const char *source)
+{
+    Serial << "deleting file " << source << endl;
+    if (!SPIFFS.begin())
+    {
+        return false;
+    }
+    bool deleted = SPIFFS.remove(source);
+    if (deleted)
+    {
+        Serial << "Deleted " << source << endl;
+    }
+    else
+    {
+        Serial << "Could not delete " << source << endl;
+    }
+    return deleted;
+}
+
+void printFile(const char *source)
+{
+    Serial << "printing file " << source << endl;
+    if (!SPIFFS.begin())
+    {
+        Serial << "could not start spiffs " << source << endl;
+        return;
+    }
+    File file = SPIFFS.open(source, FILE_READ);
+    if (!file)
+    {
+        Serial << "could not start open " << source << endl;
+        return;
+    }
+    Serial << file.readString() << endl;
+    Serial << "Finished printing file " << source << endl;
+    file.close();
+}
+
+bool doesFileExist(const char *source)
+{
+    Serial << "checking if file exist " << source << endl;
+    if (!SPIFFS.begin())
+    {
+        return false;
+    }
+    bool exists = SPIFFS.exists(source);
+    Serial << "File " << source << (exists ? "" : " not") << " found " << endl;
+    return exists;
+}
+
+bool copyFile(const char *source, const char *target)
+{
+    Serial << "copy started " << source << " -> " << target << endl;
+    if (!SPIFFS.begin())
+    {
+        return false;
+    }
+
+    File file = SPIFFS.open(source, FILE_READ);
+    File file2 = SPIFFS.open(target, FILE_WRITE);
+    Serial.flush();
+    if (!file)
+    {
+        Serial << "There was an error opening " << source << " for reading" << endl;
+        return false;
+    }
+    if (!file2)
+    {
+        Serial << "There was an error opening " << target << " for reading" << endl;
+        file.close();
+        return false;
+    }
+    file2.println(file.readString());
+    Serial << "copy finished " << source << " -> " << target << endl;
+    file.close();
+    file2.close();
+    return true;
+}

esp32/src/MQTTUtils.cpp

@@ -0,0 +1,98 @@
+#include "MQTTUtils.h"
+#include "FileUtils.h"
+#include "LogDefines.h"
+
+
+bool volatile mAliveWasRead = false;
+
+void log(int level, String message, int statusCode)
+{
+  String buffer;
+  StaticJsonDocument<200> doc;
+  // Read the current time
+  time_t now; // this is the epoch
+  tm tm;      // the structure tm holds time information in a more convient way
+  doc["level"] = level;
+  doc["message"] = message;
+  doc["statusCode"] = statusCode;
+  time(&now);
+  localtime_r(&now, &tm);
+  if (tm.tm_year > (2021 - 1970)) { /* Only add the time, if we have at least 2021 */
+    doc["time"] =  String(String(1900 + tm.tm_year) + "-" + String(tm.tm_mon + 1) + "-" + String(tm.tm_mday) +
+              " " + String(tm.tm_hour) + ":" + String(tm.tm_min) + ":" + String(tm.tm_sec));
+  }
+
+  serializeJson(doc, buffer);
+  if (mAliveWasRead)
+  {
+    getTopic(LOG_TOPIC, logTopic)
+        Homie.getMqttClient()
+            .subscribe(logTopic, 2);
+
+    Homie.getMqttClient().publish(logTopic, 2, false, buffer.c_str());
+    delete logTopic;
+  }
+  Serial << statusCode << "@" << level << " : " << message << endl;
+  Serial.flush();
+}
+
+
+void mqttWrite(HomieNode* target,String key, String value){
+    if(mAliveWasRead){
+        target->setProperty(key).send(value);
+    }
+}
+
+void mqttWrite(HomieNode* target,const char* key, String value){
+    if(aliveWasRead()){
+        target->setProperty(key).send(value);
+    }
+}
+
+
+void onMQTTMessage(char *incoming, char *payload, AsyncMqttClientMessageProperties properties, size_t len, size_t index, size_t total)
+{
+  getTopic(TEST_TOPIC, testTopic);
+  if (strcmp(incoming, testTopic) == 0)
+  {
+    mAliveWasRead = true;
+  }
+  delete testTopic;
+  getTopic(BACKUP_TOPIC, backupTopic);
+  if (strcmp(incoming, backupTopic) == 0)
+  {
+    if (strcmp(payload, "true") == 0)
+    {
+      bool backupSucessful = copyFile(CONFIG_FILE, CONFIG_FILE_BACKUP);
+      printFile(CONFIG_FILE_BACKUP);
+      if (backupSucessful)
+      {
+        log(LOG_LEVEL_INFO, LOG_BACKUP_SUCCESSFUL, LOG_BACKUP_SUCCESSFUL_CODE);
+      }
+      else
+      {
+        log(LOG_LEVEL_INFO, LOG_BACKUP_FAILED, LOG_BACKUP_FAILED_CODE);
+      }
+      Homie.getMqttClient().publish(backupTopic, 2, true, "false");
+    }
+  }
+  delete backupTopic;
+}
+
+bool aliveWasRead(){
+    return mAliveWasRead;
+}
+
+void startMQTTRoundtripTest(){
+     {
+      getTopic(TEST_TOPIC, testopic)
+          Homie.getMqttClient()
+              .subscribe(testopic, 2);
+      Homie.getMqttClient().publish(testopic, 2, false, "ping");
+      Homie.getMqttClient().onMessage(onMQTTMessage);
+
+      getTopic(BACKUP_TOPIC, backupTopic)
+          Homie.getMqttClient()
+              .subscribe(backupTopic, 2);
+    }
+}

esp32/src/MathUtil.cpp

@@ -0,0 +1,12 @@
+
+#include "MathUtils.h"
+#include <Arduino.h>
+bool equalish(double x, double y)
+{
+        return (abs(x - y) < 0.5);
+}
+
+double mapf(double x, double in_min, double in_max, double out_min, double out_max)
+{
+    return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
+}

esp32/src/PlantCtrl.cpp

@@ -1,62 +1,171 @@
 /**
  * @file PlantCtrl.cpp
  * @author your name (you@domain.com)
- * @brief 
+ * @brief
  * @version 0.1
  * @date 2020-05-27
- * 
+ *
  * @copyright Copyright (c) 2020
- * 
+ *
 
  */
-
 #include "PlantCtrl.h"
 #include "ControllerConfiguration.h"
+#include "TimeUtils.h"
+#include "driver/pcnt.h"
+#include "MQTTUtils.h"
 
-Plant::Plant(int pinSensor, int pinPump, int plantId, HomieNode *plant, PlantSettings_t *setting)
+Plant::Plant(int pinSensor, int pinPump, int plantId, HomieNode *plant, PlantSettings_t *setting, SENSOR_MODE mode)
 {
     this->mPinSensor = pinSensor;
     this->mPinPump = pinPump;
     this->mPlant = plant;
     this->mSetting = setting;
     this->mPlantId = plantId;
+    this->mSensorMode = mode;
 }
 
 void Plant::init(void)
 {
     /* Initialize Home Settings validator */
     this->mSetting->pSensorDry->setDefaultValue(DEACTIVATED_PLANT);
-    this->mSetting->pSensorDry->setValidator([](long candidate) {
-        return (((candidate >= 0) && (candidate <= 4095)) || candidate == DEACTIVATED_PLANT);
-    });
-    this->mSetting->pPumpAllowedHourRangeStart->setDefaultValue(8); // start at 8:00
-    this->mSetting->pPumpAllowedHourRangeStart->setValidator([](long candidate) {
-        return ((candidate >= 0) && (candidate <= 23));
-    });
-    this->mSetting->pPumpAllowedHourRangeEnd->setDefaultValue(20); // stop pumps at 20:00
-    this->mSetting->pPumpAllowedHourRangeEnd->setValidator([](long candidate) {
-        return ((candidate >= 0) && (candidate <= 23));
-    });
-    this->mSetting->pPumpOnlyWhenLowLight->setDefaultValue(true);
-    this->mSetting->pPumpCooldownInHours->setDefaultValue(20); // minutes
-    this->mSetting->pPumpCooldownInHours->setValidator([](long candidate) {
-        return ((candidate >= 0) && (candidate <= 1024));
-    });
+    this->mSetting->pSensorDry->setValidator([](long candidate)
+                                             { return (((candidate >= 0.0) && (candidate <= 100.0)) || equalish(candidate, DEACTIVATED_PLANT) || equalish(candidate, HYDROPONIC_MODE) || equalish(candidate, TIMER_ONLY)); });
+
+    this->mSetting->pPumpAllowedHourRangeStart->setDefaultValue(5); // start at 5:00 UTC or 7:00 ECST
+    this->mSetting->pPumpAllowedHourRangeStart->setValidator([](long candidate)
+                                                             { return ((candidate >= 0) && (candidate <= 23)); });
+    this->mSetting->pPumpAllowedHourRangeEnd->setDefaultValue(18); // stop pumps at 18 UTC or 20:00 ECST
+    this->mSetting->pPumpAllowedHourRangeEnd->setValidator([](long candidate)
+                                                           { return ((candidate >= 0) && (candidate <= 23)); });
+    this->mSetting->pPumpOnlyWhenLowLight->setDefaultValue(false);
+    this->mSetting->pPumpCooldownInSeconds->setDefaultValue(60 * 60); // 1 hour
+    this->mSetting->pPumpCooldownInSeconds->setValidator([](long candidate)
+                                                         { return (candidate >= 0); });
+
+    this->mSetting->pPumpDuration->setDefaultValue(30);
+    this->mSetting->pPumpDuration->setValidator([](long candidate)
+                                                { return ((candidate >= 0) && (candidate <= 1000)); });
+    this->mSetting->pPumpMl->setDefaultValue(1000);
+    this->mSetting->pPumpMl->setValidator([](long candidate)
+                                          { return ((candidate >= 0) && (candidate <= 5000)); });
+    this->mSetting->pPumpPowerLevel->setDefaultValue(100);
+    this->mSetting->pPumpPowerLevel->setValidator([](long candidate)
+                                                  { return ((candidate >= 0) && (candidate <= 100)); });
 
     /* Initialize Hardware */
-    pinMode(this->mPinPump, OUTPUT);
-    pinMode(this->mPinSensor, ANALOG);
-    digitalWrite(this->mPinPump, LOW);
+    ledcSetup(this->mPlantId, PWM_FREQ, PWM_BITS);
+    ledcAttachPin(mPinPump, this->mPlantId);
+    ledcWrite(this->mPlantId, 0);
+    pinMode(this->mPinSensor, INPUT);
 }
 
-void Plant::addSenseValue(void)
-{   
-    int raw = analogRead(this->mPinSensor);
-    if(raw < MOIST_SENSOR_MAX_ADC && raw > MOIST_SENSOR_MIN_ADC){
-        this->moistureRaw.add(raw);
-    } else {
-        int plantId = this->mPlantId;
-        Serial << "ignoring sensor " << plantId << " value due to being strange " << raw  << endl;
+void Plant::initSensors(void)
+{
+    switch (getSensorMode())
+    {
+    case FREQUENCY_MOD_RESISTANCE_PROBE:
+    {
+
+        pcnt_unit_t unit = (pcnt_unit_t)(PCNT_UNIT_0 + this->mPlantId);
+        pcnt_config_t pcnt_config = {}; // Instancia PCNT config
+
+        pcnt_config.pulse_gpio_num = this->mPinSensor; // Configura GPIO para entrada dos pulsos
+        pcnt_config.ctrl_gpio_num = PCNT_PIN_NOT_USED; // Configura GPIO para controle da contagem
+        pcnt_config.unit = unit;                       // Unidade de contagem PCNT - 0
+        pcnt_config.channel = PCNT_CHANNEL_0;          // Canal de contagem PCNT - 0
+        pcnt_config.counter_h_lim = INT16_MAX;         // Limite maximo de contagem - 20000
+        pcnt_config.pos_mode = PCNT_COUNT_INC;         // Incrementa contagem na subida do pulso
+        pcnt_config.neg_mode = PCNT_COUNT_DIS;         // Incrementa contagem na descida do pulso
+        pcnt_config.lctrl_mode = PCNT_MODE_KEEP;       // PCNT - modo lctrl desabilitado
+        pcnt_config.hctrl_mode = PCNT_MODE_KEEP;       // PCNT - modo hctrl - se HIGH conta incrementando
+        pcnt_unit_config(&pcnt_config);                // Configura o contador PCNT
+
+        pcnt_counter_pause(unit); // Pausa o contador PCNT
+        pcnt_counter_clear(unit); // Zera o contador PCNT
+        break;
+    }
+    case ANALOG_RESISTANCE_PROBE:
+    {
+        adcAttachPin(this->mPinSensor);
+        break;
+    }
+    case NONE:
+    {
+        // do nothing
+        break;
+    }
+    }
+}
+
+void Plant::blockingMoistureMeasurement(void)
+{
+    switch (getSensorMode())
+    {
+    case ANALOG_RESISTANCE_PROBE:
+    {
+        for (int i = 0; i < ANALOG_REREADS; i++)
+        {
+            this->mMoisture_raw.add(analogReadMilliVolts(this->mPinSensor));
+            delay(5);
+        }
+        break;
+    }
+    case FREQUENCY_MOD_RESISTANCE_PROBE:
+    case NONE:
+    {
+        // nothing to do here
+        break;
+    }
+    }
+}
+
+void Plant::startMoistureMeasurement(void)
+{
+    switch (getSensorMode())
+    {
+    case FREQUENCY_MOD_RESISTANCE_PROBE:
+    {
+        pcnt_unit_t unit = (pcnt_unit_t)(PCNT_UNIT_0 + this->mPlantId);
+        pcnt_counter_resume(unit);
+        break;
+    }
+    case ANALOG_RESISTANCE_PROBE:
+    case NONE:
+    {
+        // do nothing here
+    }
+    }
+}
+
+void Plant::stopMoistureMeasurement(void)
+{
+    switch (getSensorMode())
+    {
+    case FREQUENCY_MOD_RESISTANCE_PROBE:
+    {
+        int16_t pulses;
+        pcnt_unit_t unit = (pcnt_unit_t)(PCNT_UNIT_0 + this->mPlantId);
+        pcnt_counter_pause(unit);
+        esp_err_t result = pcnt_get_counter_value(unit, &pulses);
+        pcnt_counter_clear(unit);
+        if (result != ESP_OK)
+        {
+            log(LOG_LEVEL_ERROR, LOG_HARDWARECOUNTER_ERROR_MESSAGE, LOG_HARDWARECOUNTER_ERROR_CODE);
+            this->mMoisture_raw.clear();
+            this->mMoisture_raw.add(-1);
+        }
+        else
+        {
+            this->mMoisture_raw.add(pulses * (1000 / MOISTURE_MEASUREMENT_DURATION));
+        }
+        break;
+    }
+    case ANALOG_RESISTANCE_PROBE:
+    case NONE:
+    {
+        break;
+    }
     }
 }
 
@@ -65,11 +174,33 @@ void Plant::postMQTTconnection(void)
     const String OFF = String("OFF");
     this->mConnected = true;
     this->mPlant->setProperty("switch").send(OFF);
+
+    float pct = getCurrentMoisturePCT();
+    float raw = getCurrentMoistureRaw();
+    if (equalish(raw, MISSING_SENSOR))
+    {
+        pct = 0;
+    }
+    if (pct < 0)
+    {
+        pct = 0;
+    }
+    if (pct > 100)
+    {
+        pct = 100;
+    }
+
+    this->mPlant->setProperty("moist").send(String(pct));
+    this->mPlant->setProperty("sensormode").send(getSensorModeString());
+    this->mPlant->setProperty("moistraw").send(String(raw));
+    this->mPlant->setProperty("moisttrigger").send(String(getTargetMoisturePCT()));
 }
 
 void Plant::deactivatePump(void)
 {
-    digitalWrite(this->mPinPump, LOW);
+    int plantId = this->mPlantId;
+    Serial << "deactivating pump " << plantId << endl;
+    ledcWrite(this->mPlantId, 0);
     if (this->mConnected)
     {
         const String OFF = String("OFF");
@@ -77,39 +208,69 @@ void Plant::deactivatePump(void)
     }
 }
 
-void Plant::activatePump(void)
+void Plant::publishState(int stateNumber, String stateString)
 {
-    digitalWrite(this->mPinPump, HIGH);
+    String buffer;
+    StaticJsonDocument<200> doc;
     if (this->mConnected)
     {
-        const String OFF = String("ON");
-        this->mPlant->setProperty("switch").send(OFF);
+        doc["number"] = stateNumber;
+        doc["message"] = stateString;
+        serializeJson(doc, buffer);
+        this->mPlant->setProperty("state").send(buffer.c_str());
     }
 }
 
+void Plant::activatePump(void)
+{
+    int plantId = this->mPlantId;
+
+    Serial << "activating pump " << plantId << endl;
+    long desiredPowerLevelPercent = this->mSetting->pPumpPowerLevel->get();
+    ledcWrite(this->mPlantId, desiredPowerLevelPercent * PWM_BITS);
+    if (this->mConnected)
+    {
+        const String ON = String("ON");
+        this->mPlant->setProperty("switch").send(ON);
+        this->mPlant->setProperty("lastPump").send(String(getCurrentTime()));
+    }
+}
+
+bool Plant::switchHandler(const HomieRange &range, const String &value)
+{
+    if (range.isRange)
+    {
+        return false; // only one switch is present
+    }
+
+    if ((value.equals("ON")) || (value.equals("On")) || (value.equals("on")) || (value.equals("true")))
+    {
+        this->activatePump();
+        return true;
+    }
+    else if ((value.equals("OFF")) || (value.equals("Off")) || (value.equals("off")) || (value.equals("false")))
+    {
+        this->deactivatePump();
+        return true;
+    }
+    else
+    {
+        return false;
+    }
+}
+
+void Plant::setSwitchHandler(HomieInternals::PropertyInputHandler f)
+{
+    this->mPump.settable(f);
+}
+
 void Plant::advertise(void)
 {
     // Advertise topics
-    this->mPlant->advertise("switch").setName("Pump 1").setDatatype("boolean");
-    //FIXME add .settable(this->switchHandler)
-    this->mPlant->advertise("moist").setName("Percent").setDatatype("number").setUnit("%");
-    this->mPlant->advertise("moistraw").setName("adc").setDatatype("number").setUnit("3.3/4096V");
+    mPump = this->mPlant->advertise("switch").setName("Pump").setDatatype("Boolean");
+    this->mPlant->advertise("lastPump").setName("lastPump").setDatatype("Integer").setUnit("unixtime").setRetained(true);
+    this->mPlant->advertise("moist").setName("Percent").setDatatype("Float").setUnit("%").setRetained(true);
+    this->mPlant->advertise("moistraw").setName("frequency").setDatatype("Float").setUnit("hz").setRetained(true);
+    this->mPlant->advertise("state").setName("state").setDatatype("String").setRetained(true);
+    
 }
-
-/* FIXME
-bool Plant::switchHandler(const HomieRange& range, const String& value) {
-  if (range.isRange) return false;  // only one switch is present
-  
-
-    if ((value.equals("ON")) || (value.equals("On")) || (value.equals("on")) || (value.equals("true"))) {
-      this->activatePump();
-      return true;
-    } else if ((value.equals("OFF")) || (value.equals("Off")) || (value.equals("off")) || (value.equals("false")) ) {
-      this->deactivatePump();
-      return true;
-    } else {
-      return false;
-    }
-  }
-}
-*/

esp32/src/TimeUtils.cpp

@@ -0,0 +1,18 @@
+#include "TimeUtils.h"
+#include <Homie.h>
+
+long getCurrentTime()
+{
+  struct timeval tv_now;
+  gettimeofday(&tv_now, NULL);
+  return tv_now.tv_sec;
+}
+
+int getCurrentHour()
+{
+  struct tm info;
+  time_t now;
+  time(&now);
+  localtime_r(&now, &info);
+  return info.tm_hour;
+}

esp32test/Esp32DeepSleepTest/.vscode/extensions.json

@@ -1,7 +1,10 @@
-{
-    // See http://go.microsoft.com/fwlink/?LinkId=827846
-    // for the documentation about the extensions.json format
-    "recommendations": [
-        "platformio.platformio-ide"
-    ]
-}
+{
+    // See http://go.microsoft.com/fwlink/?LinkId=827846
+    // for the documentation about the extensions.json format
+    "recommendations": [
+        "platformio.platformio-ide"
+    ],
+    "unwantedRecommendations": [
+        "ms-vscode.cpptools-extension-pack"
+    ]
+}

esp32test/Esp32DeepSleepTest/PlantControlTest.code-workspace

@@ -0,0 +1,28 @@
+{
+	"folders": [
+		{
+			"path": "."
+		}
+	],
+	"settings": {
+		"files.associations": {
+			"*.tcc": "cpp",
+			"bitset": "cpp",
+			"algorithm": "cpp",
+			"istream": "cpp",
+			"limits": "cpp",
+			"streambuf": "cpp",
+			"functional": "cpp",
+			"string": "cpp",
+			"typeinfo": "cpp",
+			"cmath": "cpp",
+			"array": "cpp",
+			"deque": "cpp",
+			"unordered_map": "cpp",
+			"unordered_set": "cpp",
+			"vector": "cpp",
+			"initializer_list": "cpp",
+			"regex": "cpp"
+		}
+	}
+}

esp32test/Esp32DeepSleepTest/include/DS18B20.h

@@ -1,52 +0,0 @@
-/**
- * @file DS18B20.h
- * @author your name (you@domain.com)
- * @brief 
- * @version 0.1
- * @date 2020-06-09
- * 
- * @copyright Copyright (c) 2020
- * Based on the LUA code from the ESP8266
- * --------------------------------------------------------------------------------
- * -- DS18B20 one wire module for NODEMCU
- * -- NODEMCU TEAM
- * -- LICENCE: http://opensource.org/licenses/MIT
- * -- Vowstar <vowstar@nodemcu.com>
- * -- 2015/02/14 sza2 <sza2trash@gmail.com> Fix for negative values
- * --------------------------------------------------------------------------------
- */
-
-#ifndef DS18B20_H
-#define DS18B20_H
-
-#include <OneWire.h>
-
-class Ds18B20 {
-    private:
-        OneWire* mDs;
-        int foundDevices;
-    public:
-        Ds18B20(int pin) {
-            this->mDs = new OneWire(pin);
-        }
-
-        ~Ds18B20() {
-            delete this->mDs;
-        }
-        /**
-         * @brief read amount sensots
-         * check for available of DS18B20 sensors
-         * @return amount of sensors
-         */
-        int readDevices(void);
-
-        /**
-         * @brief Read all temperatures in celsius
-         * 
-         * @param pTemperatures     array of float valuies
-         * @param maxTemperatures  size of the given array
-         * @return int amount of read temperature values
-         */
-        int readAllTemperatures(float* pTemperatures, int maxTemperatures);
-};
-#endif

esp32test/Esp32DeepSleepTest/include/ulp-pwm.h

@@ -0,0 +1,187 @@
+#ifndef ULP_PWM_h
+#define ILP_PWM_h
+
+#include <Arduino.h>
+#include "driver/rtc_io.h"
+#include "soc/rtc_cntl_reg.h"
+#include "soc/rtc.h"
+#include "esp32/ulp.h"
+
+#define LBL_START 1
+#define LBL_DELAY_ON 2
+#define LBL_DELAY_OFF 3
+#define LBL_SKIP_ON 4
+#define LBL_SKIP_OFF 5
+#define REGISTER_DELAY_LOOP_COUNTER R0
+#define REGISTER_TICKS_ON R1
+#define REGISTER_TICKS_OFF R2
+#define TOTAL_TICKS_DELAY 255
+#define PIN GPIO_NUM_12
+
+//support 20 vars
+const size_t ulp_var_offset = CONFIG_ULP_COPROC_RESERVE_MEM - 20;
+//use the first for dimming
+const size_t ulp_dimm_offset = ulp_var_offset + 1;
+const size_t ulp_alive_offset = ulp_var_offset + 2;
+
+//see https://github.com/perseus086/ESP32-notes
+const uint32_t rtc_bit[40] = {
+    25, //gpio0
+    0,  //gpio1
+    26, //gpio2
+    0,  //gpio3
+    24, //gpio4
+    0,  //gpio5
+    0,  //gpio6
+    0,  //gpio7
+    0,  //gpio8
+    0,  //gpio9
+    0,  //gpio10
+    0,  //gpio11
+    29, //gpio12
+    28, //gpio13
+    30, //gpio14
+    27, //gpio15
+    0,  //gpio16
+    31, //gpio17
+    0,  //gpio18
+    0,  //gpio19
+    0,  //gpio20
+    0,  //gpio21
+    0,  //gpio22
+    0,  //gpio23
+    0,  //gpio24
+    20, //gpio25
+    21, //gpio26
+    0,  //gpio27
+    0,  //gpio28
+    0,  //gpio29
+    0,  //gpio30
+    0,  //gpio31
+    23, //gpio32
+    22, //gpio33
+    18, //gpio34
+    19, //gpio35
+    14, //gpio36
+    15, //gpio37
+    16, //gpio38
+    17  //gpio39
+};
+
+static inline void ulp_data_write(size_t offset, uint16_t value)
+{
+    if (offset >= CONFIG_ULP_COPROC_RESERVE_MEM || offset <= ulp_var_offset)
+    {
+        Serial.print("Invalid ULP offset detected, refusing write!");
+        Serial.print(offset);
+        Serial.print("-");
+        Serial.print(ulp_var_offset);
+        Serial.print("-");
+        Serial.println(CONFIG_ULP_COPROC_RESERVE_MEM);
+        return;
+    }
+    else
+    {
+        RTC_SLOW_MEM[offset] = value;
+    }
+}
+
+static inline uint16_t ulp_data_read(size_t offset)
+{
+    if (offset >= CONFIG_ULP_COPROC_RESERVE_MEM || offset <= ulp_var_offset)
+    {
+        Serial.print("Invalid ULP offset detected");
+        Serial.print(offset);
+        Serial.print("-");
+        Serial.print(ulp_var_offset);
+        Serial.print("-");
+        Serial.println(CONFIG_ULP_COPROC_RESERVE_MEM);
+    }
+    return RTC_SLOW_MEM[offset] & 0xffff;
+}
+
+static inline uint32_t rtc_io_number_get(gpio_num_t gpio_num)
+{
+    assert(rtc_gpio_is_valid_gpio(gpio_num) && "Invalid GPIO for RTC");
+    uint32_t bit = rtc_bit[gpio_num];
+    Serial.print("Resolved GPIO ");
+    Serial.print(gpio_num);
+    Serial.print(" to rtc bit ");
+    Serial.println(bit);
+    return bit;
+}
+
+void ulp_pwm_start(void)
+{
+    rtc_gpio_init(PIN);
+    rtc_gpio_set_direction(PIN, RTC_GPIO_MODE_OUTPUT_ONLY);
+    rtc_gpio_set_level(PIN, 0);
+    const uint32_t rtc_gpio = rtc_io_number_get(PIN);
+
+    // Define ULP program
+    const ulp_insn_t ulp_prog[] = {
+        M_LABEL(LBL_START),
+
+        I_MOVI(REGISTER_DELAY_LOOP_COUNTER, 1),
+        I_MOVI(REGISTER_TICKS_ON, 0),
+        I_ST(REGISTER_DELAY_LOOP_COUNTER, REGISTER_TICKS_ON, ulp_alive_offset), //store 1 with 0 offset into alive
+
+        I_LD(REGISTER_TICKS_ON, REGISTER_TICKS_ON, ulp_dimm_offset), //REGISTER_TICKS_ON = RTC_DATA[0+ulp_dimm_offset]
+        //in total there is always 255 delay loop iterations, but in different duty cycle
+        I_MOVI(REGISTER_TICKS_OFF, TOTAL_TICKS_DELAY),
+        I_SUBR(REGISTER_TICKS_OFF, REGISTER_TICKS_OFF, REGISTER_TICKS_ON),
+
+        //on phase
+        I_MOVR(REGISTER_DELAY_LOOP_COUNTER, REGISTER_TICKS_ON),
+        M_BL(LBL_SKIP_ON, 1),                                 //if never on, skip on phase
+        I_WR_REG(RTC_GPIO_OUT_REG, rtc_gpio, rtc_gpio, HIGH), // on
+        M_LABEL(LBL_DELAY_ON),
+        I_DELAY(1),                                                          //wait 1 clock
+        I_SUBI(REGISTER_DELAY_LOOP_COUNTER, REGISTER_DELAY_LOOP_COUNTER, 1), // REGISTER_DELAY_LOOP_COUNTER--
+        M_BGE(LBL_DELAY_ON, 1),                                              //if time left, goto start of on loop
+        M_LABEL(LBL_SKIP_ON),
+
+        //off phase
+        I_MOVR(REGISTER_DELAY_LOOP_COUNTER, REGISTER_TICKS_OFF),
+
+        M_BL(LBL_SKIP_OFF, 1),                               //if never off, skip on phase
+        I_WR_REG(RTC_GPIO_OUT_REG, rtc_gpio, rtc_gpio, LOW), // on
+        M_LABEL(3),
+        I_DELAY(1),                                                          //wait 1 clock
+        I_SUBI(REGISTER_DELAY_LOOP_COUNTER, REGISTER_DELAY_LOOP_COUNTER, 1), // REGISTER_DELAY_LOOP_COUNTER--
+        M_BGE(3, 1),                                                         //if time left, goto start of on loop
+        M_LABEL(LBL_SKIP_OFF),
+
+        M_BX(LBL_START),
+    };
+    // Run ULP program
+    size_t size = sizeof(ulp_prog) / sizeof(ulp_insn_t);
+    assert(size < ulp_var_offset && "ULP_DATA_OFFSET needs to be greater or equal to the program size");
+    esp_err_t error = ulp_process_macros_and_load(0, ulp_prog, &size);
+    Serial.print("ULP bootstrap status ");
+    Serial.println(error);
+
+    //allow glitchless start
+    ulp_data_write(ulp_alive_offset, 0);
+
+    error = ulp_run(0);
+    Serial.print("ULP start status ");
+    Serial.println(error);
+}
+
+static inline void ulp_pwm_set_level(uint8_t level)
+{
+    ulp_data_write(ulp_dimm_offset, level);
+}
+
+static inline void ulp_pwm_init()
+{
+    ulp_data_write(ulp_alive_offset, 0);
+    delay(10);
+    if (ulp_data_read(ulp_alive_offset) == 0)
+    {
+        ulp_pwm_start();
+    }
+}
+
+#endif

esp32test/Esp32DeepSleepTest/platformio.ini

@@ -12,5 +12,5 @@
 platform = espressif32
 board = esp32doit-devkit-v1
 framework = arduino
-build_flags = -DPIO_FRAMEWORK_ARDUINO_LWIP2_LOW_MEMORY
-lib_deps = OneWire
+lib_deps = pololu/VL53L0X@^1.3.1
+build_flags = -DPIO_FRAMEWORK_ARDUINO_LWIP2_LOW_MEMORY -DBOOTLOADER_LOG_LEVEL_VERBOSE -DLOG_DEFAULT_LEVEL_VERBOSE -DCORE_DEBUG_LEVEL=5

esp32test/Esp32DeepSleepTest/src/DS18B20.cpp

@@ -1,105 +0,0 @@
-/**
- * @file DS18B20.cpp
- * @author your name (you@domain.com)
- * @brief 
- * @version 0.1
- * @date 2020-06-09
- * 
- * @copyright Copyright (c) 2020
- * 
- */
-
-#include "DS18B20.h"
-
-#define STARTCONV       0x44
-#define READSCRATCH     0xBE  // Read EEPROM
-#define TEMP_LSB        0
-#define TEMP_MSB        1
-#define SCRATCHPADSIZE  9
-#define OFFSET_CRC8     8       /**< 9th byte has the CRC of the complete data */
-
-//Printf debugging
-//#define DS_DEBUG
-
-int Ds18B20::readDevices() {
-    byte addr[8];
-
-    int amount = -1;
-    while (this->mDs->search(addr)) {
-        amount++;
-    }
-    this->mDs->reset_search();
-    return amount;
-}
-
-int Ds18B20::readAllTemperatures(float* pTemperatures, int maxTemperatures) {
-    byte addr[8];
-    uint8_t scratchPad[SCRATCHPADSIZE];
-    int currentTemp = 0;
-
-    while (this->mDs->search(addr)) {
-#ifdef DS_DEBUG
-        Serial.print(" ROM =");
-        for (i = 0; i < 8; i++) {
-            Serial.write(' ');
-            Serial.print(addr[i], HEX);
-        }
-#endif
-        this->mDs->reset();
-        this->mDs->select(addr);
-        this->mDs->write(STARTCONV);
-        this->mDs->reset();
-        this->mDs->select(addr);
-        this->mDs->write(READSCRATCH);
-
-        // Read all registers in a simple loop
-        // byte 0: temperature LSB
-        // byte 1: temperature MSB
-        // byte 2: high alarm temp
-        // byte 3: low alarm temp
-        // byte 4: DS18S20: store for crc
-        //         DS18B20 & DS1822: configuration register
-        // byte 5: internal use & crc
-        // byte 6: DS18S20: COUNT_REMAIN
-        //         DS18B20 & DS1822: store for crc
-        // byte 7: DS18S20: COUNT_PER_C
-        //         DS18B20 & DS1822: store for crc
-        // byte 8: SCRATCHPAD_CRC
-#ifdef DS_DEBUG
-        Serial.write("\r\nDATA:");
-        for (uint8_t i = 0; i < 9; i++) {
-            Serial.print(scratchPad[i], HEX);
-        }
-#else
-        delay(50);
-#endif
-        for (uint8_t i = 0; i < 9; i++) {
-            scratchPad[i] = this->mDs->read();
-        }
-        uint8_t crc8 = this->mDs->crc8(scratchPad, 8);
-
-        /* Only work an valid data */
-        if (crc8 == scratchPad[OFFSET_CRC8]) {
-            int16_t fpTemperature = (((int16_t) scratchPad[TEMP_MSB]) << 11)
-                | (((int16_t) scratchPad[TEMP_LSB]) << 3);
-            float celsius =  (float) fpTemperature * 0.0078125;
-#ifdef DS_DEBUG
-            Serial.printf("\r\nTemp%d %f °C (Raw: %d, %x =? %x)\r\n", (currentTemp+1), celsius, fpTemperature, crc8, scratchPad[8]);
-#endif
-            /* check, if the buffer as some space for our data */
-            if (currentTemp < maxTemperatures) {
-                pTemperatures[currentTemp] = celsius;
-            } else {
-                return -1;
-            }
-        }
-        currentTemp++;
-    } 
-    this->mDs->reset();
-#ifdef DS_DEBUG
-    Serial.println(" No more addresses.");
-    Serial.println();
-#endif
-
-    return currentTemp;
-}

esp32test/Esp32DeepSleepTest/src/main.cpp

@@ -1,174 +1,83 @@
 #include <Arduino.h>
-#include "esp_sleep.h"
-#include <DS18B20.h>
+#include "driver/pcnt.h"
+#include <VL53L0X.h>
 
-#define uS_TO_S_FACTOR 1000000  /* Conversion factor for micro seconds to seconds */
-#define TIME_TO_SLEEP  5        /* Time ESP32 will go to sleep (in seconds) */
-
-#define SENSOR_LIPO         34  /**< GPIO 34 (ADC1) */
-#define SENSOR_SOLAR        35  /**< GPIO 35 (ADC1) */
-
-#define SENSOR_DS18B20      2 /**< GPIO 2 */
+#define SENSOR_TANK_SDA    GPIO_NUM_16 /**< GPIO 16 - echo feedback of water sensor */ 
+#define SENSOR_TANK_SCL    GPIO_NUM_17 /**< GPIO 17 - trigger for water sensor */
 
 
-#define OUTPUT_PUMP0        23  /**< GPIO 23  */
-#define OUTPUT_PUMP1        22  /**< GPIO 22  */
-#define OUTPUT_PUMP2        21  /**< GPIO 21 */
-#define OUTPUT_PUMP3        19  /**< GPIO 19 */
-#define OUTPUT_PUMP4        18  /**< GPIO 18 */
-#define OUTPUT_PUMP5        5   /**< GPIO 5  */
-#define OUTPUT_PUMP6        15  /**< GPIO 15 */
+#define OUTPUT_SENSOR       14
+#define SENSOR_PLANT        17
 
-#define OUTPUT_SENSOR       16  /**< GPIO 16 - Enable Sensors  */
-#define OUTPUT_PUMP         13  /**< GPIO 13 - Enable Pumps  */
+VL53L0X tankSensor;
+bool distanceReady = false;
 
-#define SENSOR_PLANT0       32  /**< GPIO 32 (ADC1) */
-
-
-#define ADC_TO_VOLT(adc)                      ((adc) * 3.3 ) / 4095)
-#define ADC_TO_VOLT_WITH_MULTI(adc, multi)    (((adc) * 3.3 * (multi)) / 4095)
-
-
-#define SOLAR_VOLT(adc)     ADC_TO_VOLT_WITH_MULTI(adc, 4.0306) /**< 100k and 33k voltage dividor */
-#define ADC_5V_TO_3V3(adc)  ADC_TO_VOLT_WITH_MULTI(adc, 1.7)    /**< 33k and 47k8 voltage dividor */
-
-RTC_DATA_ATTR int bootCount = 0;
-RTC_DATA_ATTR int pumpActive = 0;
-int secondBootCount = 0;
-
-Ds18B20 ds(SENSOR_DS18B20);
-
-void print_wakeup_reason(){
-  esp_sleep_wakeup_cause_t wakeup_reason;
-
-  wakeup_reason = esp_sleep_get_wakeup_cause();
-
-  switch(wakeup_reason){
-    case ESP_SLEEP_WAKEUP_EXT0 : Serial.println("Wakeup caused by external signal using RTC_IO"); break;
-    case ESP_SLEEP_WAKEUP_EXT1 : Serial.println("Wakeup caused by external signal using RTC_CNTL"); break;
-    case ESP_SLEEP_WAKEUP_TIMER : Serial.println("Wakeup caused by timer"); break;
-    case ESP_SLEEP_WAKEUP_TOUCHPAD : Serial.println("Wakeup caused by touchpad"); break;
-    case ESP_SLEEP_WAKEUP_ULP : Serial.println("Wakeup caused by ULP program"); break;
-    default : Serial.printf("Wakeup was not caused by deep sleep: %d\n",wakeup_reason); break;
-  }
-}
-
-void setAll2Off() {
-  digitalWrite(OUTPUT_PUMP0, LOW);
-  digitalWrite(OUTPUT_PUMP1, LOW);
-  digitalWrite(OUTPUT_PUMP2, LOW);
-  digitalWrite(OUTPUT_PUMP3, LOW);
-  digitalWrite(OUTPUT_PUMP4, LOW);
-  digitalWrite(OUTPUT_PUMP5, LOW);
-  digitalWrite(OUTPUT_PUMP6, LOW);
-  digitalWrite(OUTPUT_SENSOR, LOW);
-  digitalWrite(OUTPUT_PUMP, LOW);
-}
-
-void setup() {
-
-  pinMode(OUTPUT_PUMP0, OUTPUT);
-  pinMode(OUTPUT_PUMP1, OUTPUT);
-  pinMode(OUTPUT_PUMP2, OUTPUT);
-  pinMode(OUTPUT_PUMP3, OUTPUT);
-  pinMode(OUTPUT_PUMP4, OUTPUT);
-  pinMode(OUTPUT_PUMP5, OUTPUT);
-  pinMode(OUTPUT_PUMP6, OUTPUT);
-  pinMode(OUTPUT_SENSOR, OUTPUT);
-  pinMode(OUTPUT_PUMP, OUTPUT);
-
-  pinMode(SENSOR_LIPO, ANALOG);
-  pinMode(SENSOR_SOLAR, ANALOG);
-  pinMode(SENSOR_PLANT0, ANALOG);
-
-  setAll2Off();
-  
-  Serial.begin(115200);
-
-  //Increment boot number and print it every reboot
-  ++bootCount;
-  ++secondBootCount;
-  Serial.println("Boot number: " + String(bootCount) + " " + String(secondBootCount));
-
-  //Print the wakeup reason for ESP32
-  print_wakeup_reason();
-
-  /*
-  First we configure the wake up source
-  We set our ESP32 to wake up every 5 seconds
-  */
-  esp_sleep_enable_timer_wakeup(TIME_TO_SLEEP * uS_TO_S_FACTOR);
-  Serial.println("Setup ESP32 to sleep for every " + String(TIME_TO_SLEEP) +
-  " Seconds");
-  esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_OFF);
-  esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_SLOW_MEM, ESP_PD_OPTION_ON);
-  esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_FAST_MEM, ESP_PD_OPTION_OFF);
-  esp_sleep_pd_config(ESP_PD_DOMAIN_XTAL,ESP_PD_OPTION_ON);
-
-
-
-  pinMode(GPIO_NUM_32, ANALOG);
-  digitalWrite(GPIO_NUM_32, HIGH);
-  pinMode(GPIO_NUM_33, INPUT_PULLUP);
-  digitalWrite(GPIO_NUM_33, HIGH);
-  pinMode(GPIO_NUM_25, INPUT_PULLUP);
-  digitalWrite(GPIO_NUM_25, HIGH);
-  pinMode(GPIO_NUM_26, INPUT_PULLUP);
-  pinMode(GPIO_NUM_27, INPUT_PULLUP);
-  pinMode(GPIO_NUM_14, INPUT_PULLUP);
-  pinMode(GPIO_NUM_12, INPUT_PULLUP);
-
-
-  /* Sensor activieren */
-  digitalWrite(OUTPUT_SENSOR, HIGH);
-
-  /* activate power pump and pump 0 */
-  digitalWrite(OUTPUT_PUMP, HIGH);
-}
-
-
-
-void loop() {  
-  double value = analogRead(SENSOR_LIPO);
-  
-  Serial.println(value);
-
-  float temp[2] = {0, 0};
-  float* pFloat = temp;
-  
-  Serial.print("DS18B20 sensors: ");
-  Serial.println(ds.readDevices());
-  delay(200);
-  if (ds.readAllTemperatures(pFloat, 2) > 0) {
-      Serial.println(temp[0]);
-      Serial.println(temp[1]);
+void initializeTanksensor() {
+  Wire.begin(SENSOR_TANK_SDA, SENSOR_TANK_SCL, 100000UL /* 100kHz */);
+  tankSensor.setBus(&Wire);
+  delay(100);
+  tankSensor.setTimeout(500);
+  long start = millis();
+  while (start + 500 > millis())
+  {
+    if (tankSensor.init())
+    {
+      distanceReady = true;
+      break;
+    }
+    else
+    {
+      delay(20);
+    }
   }
 
-  
-  double volt = ADC_5V_TO_3V3(value);
-  Serial.print("Lipo: ");
-  Serial.println(volt);
-
-  pumpActive = (pumpActive + 1) % 2;
-  if (pumpActive) {
-    digitalWrite(OUTPUT_PUMP0, HIGH);
+  if ((distanceReady) && (!tankSensor.timeoutOccurred()))
+  {
+    Serial.println("Sensor init done");
+    tankSensor.setSignalRateLimit(0.1);
+    // increase laser pulse periods (defaults are 14 and 10 PCLKs)
+    tankSensor.setVcselPulsePeriod(VL53L0X::VcselPeriodPreRange, 18);
+    tankSensor.setVcselPulsePeriod(VL53L0X::VcselPeriodFinalRange, 14);
+    tankSensor.setMeasurementTimingBudget(200000);
+    tankSensor.startContinuous();
   } else {
-    digitalWrite(OUTPUT_PUMP0, LOW);
+    Serial.println("Sensor init failed");
   }
+}
 
-   double solarVal = analogRead(SENSOR_SOLAR);
-  
-  Serial.println(solarVal);
-  
-  double solarVolt = SOLAR_VOLT(solarVal);
-  Serial.print("Solar: ");
-  Serial.println(solarVolt);
+void setup()
+{
+  Serial.begin(115200);
+  pinMode(OUTPUT_SENSOR, OUTPUT);
 
-  Serial.print("Moist0: ");
-  Serial.println(analogRead(SENSOR_PLANT0));
+  digitalWrite(OUTPUT_SENSOR, HIGH);
+  Serial.println("Nodemcu ESP32 Start done");
 
-  delay(1000);
-  gpio_deep_sleep_hold_en();
-  gpio_hold_en(GPIO_NUM_13);
-  esp_deep_sleep_start();
-}
+  initializeTanksensor();
+}
+
+void loop() { 
+    
+  delay(500);
+    
+   
+  if ((distanceReady) && (!tankSensor.timeoutOccurred()))
+  {
+    uint16_t distance = tankSensor.readRangeSingleMillimeters();
+    if (distance > 8000) {
+      Serial.println("Reset due invalid distance: 8 meter");
+      Wire.end();
+      delay(1000);
+      initializeTanksensor();
+    } else {
+      Serial.print("Distance");
+      Serial.println(distance);
+    }
+  } else {
+    Serial.println("Timeout");
+    tankSensor.stopContinuous();
+    Wire.end();
+    delay(100);
+    initializeTanksensor();
+  }
+}

plantctrl-extension/plantctrl-extension.kicad_prl

@@ -0,0 +1,78 @@
+{
+  "board": {
+    "active_layer": 31,
+    "active_layer_preset": "All Layers",
+    "auto_track_width": false,
+    "hidden_netclasses": [],
+    "hidden_nets": [],
+    "high_contrast_mode": 0,
+    "net_color_mode": 1,
+    "opacity": {
+      "images": 0.6,
+      "pads": 1.0,
+      "tracks": 1.0,
+      "vias": 1.0,
+      "zones": 0.6
+    },
+    "ratsnest_display_mode": 0,
+    "selection_filter": {
+      "dimensions": true,
+      "footprints": true,
+      "graphics": true,
+      "keepouts": true,
+      "lockedItems": true,
+      "otherItems": true,
+      "pads": true,
+      "text": true,
+      "tracks": true,
+      "vias": true,
+      "zones": true
+    },
+    "visible_items": [
+      0,
+      1,
+      2,
+      3,
+      4,
+      5,
+      8,
+      9,
+      10,
+      11,
+      12,
+      13,
+      15,
+      16,
+      17,
+      18,
+      19,
+      20,
+      21,
+      22,
+      23,
+      24,
+      25,
+      26,
+      27,
+      28,
+      29,
+      30,
+      32,
+      33,
+      34,
+      35,
+      36,
+      39,
+      40
+    ],
+    "visible_layers": "fffffff_ffffffff",
+    "zone_display_mode": 0
+  },
+  "meta": {
+    "filename": "plantctrl-extension.kicad_prl",
+    "version": 3
+  },
+  "project": {
+    "files": []
+  }
+}