C3MA/PlantCtrl
5
0
Fork 0
Code Issues 8 Pull Requests Packages Projects Releases Wiki Activity

config reduced, config json parser memory adjusted

Browse Source
This commit is contained in:
Your Name
2021-06-29 23:49:48 +02:00
parent 5568000d62
commit a1de9ee2b9
4 changed files with 24 additions and 20 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
esp32/include/ControllerConfiguration.h
View File

@@ -78,7 +78,7 @@
/** \addtogroup Configuration
* @{
*/
#define FIRMWARE_VERSION "sw 1.2 hw 0.9"
#define FIRMWARE_VERSION "sw 1.3 hw 0.10"
#define MOIST_SENSOR_MAX_ADC (85 * 4095 / 100)
#define MOIST_SENSOR_MIN_ADC (25 * 4095 / 100)
@@ -94,7 +94,8 @@
#define SOLAR_CHARGE_MAX_VOLTAGE 9 /**< Sun is shining (noon) */
#define VOLT_MAX_BATT 4.2f
#define MAX_CONFIG_SETTING_ITEMS 50 /**< Parameter, that can be configured in Homie */
#define MAX_CONFIG_SETTING_ITEMS 100 /**< Parameter, that can be configured in Homie */
#define MAX_JSON_CONFIG_FILE_SIZE_CUSTOM 2500
#define TEMPERATUR_TIMEOUT 3000 /**< 3 Seconds timeout for the temperatur sensors */
#define DS18B20_RESOLUTION 9 /**< 9bit temperature resolution -> 0.5°C steps */

26
esp32/include/HomieConfiguration.h
View File

@@ -65,16 +65,16 @@ HomieNode stayAlive("stay", "alive", "alive"); /**< Necessary for Mqtt Active C
* General settings for the controller
* @{
*/
HomieSetting<long> deepSleepTime("deepsleep", "time in seconds to sleep");
HomieSetting<long> deepSleepTime("sleep", "time in seconds to sleep");
HomieSetting<long> deepSleepNightTime("nightsleep", "time in seconds to sleep (0 uses same setting: deepsleep at night, too)");
HomieSetting<long> wateringDeepSleep("pumpdeepsleep", "time seconds to sleep, while a pump is running");
HomieSetting<long> wateringDeepSleep("pumpsleep", "time seconds to sleep, while a pump is running");
HomieSetting<long> waterLevelMax("watermaxlevel", "distance (mm) at maximum water level");
HomieSetting<long> waterLevelMin("waterminlevel", "distance (mm) at minimum water level (pumps still covered)");
HomieSetting<long> waterLevelWarn("waterlevelwarn", "warn (mm) if below this water level %");
HomieSetting<long> waterLevelVol("waterVolume", "(ml) between minimum and maximum");
HomieSetting<const char *> lipoSensorAddr("lipoTempAddr", "1wire address for lipo temperature sensor");
HomieSetting<const char *> waterSensorAddr("waterTempIndex", "1wire address for water temperature sensor");
HomieSetting<long> waterLevelMax("tankmax", "distance (mm) at maximum water level");
HomieSetting<long> waterLevelMin("tankmin", "distance (mm) at minimum water level (pumps still covered)");
HomieSetting<long> waterLevelWarn("tankwarn", "warn (mm) if below this water level %");
HomieSetting<long> waterLevelVol("tankVolume", "(ml) between minimum and maximum");
HomieSetting<const char *> lipoSensorAddr("lipoDSAddr", "1wire address for lipo temperature sensor");
HomieSetting<const char *> waterSensorAddr("tankDSAddr", "1wire address for water temperature sensor");
HomieSetting<const char *> ntpServer("ntpServer", "NTP server (pool.ntp.org as default)");
/**
@@ -88,11 +88,11 @@ HomieSetting<const char *> ntpServer("ntpServer", "NTP server (pool.ntp.org as d
**/
#define GENERATE_PLANT(plant, strplant) \
HomieSetting<long> mSensorDry##plant = HomieSetting<long>("moistdry" strplant, "Plant " strplant "- Moist sensor dry threshold"); \
HomieSetting<long> mPumpAllowedHourRangeStart##plant = HomieSetting<long>("rangehourstart" strplant, "Plant" strplant " - Range pump allowed hour start (0-23)"); \
HomieSetting<long> mPumpAllowedHourRangeEnd##plant = HomieSetting<long>("rangehourend" strplant, "Plant" strplant " - Range pump allowed hour end (0-23)"); \
HomieSetting<bool> mPumpOnlyWhenLowLight##plant = HomieSetting<bool>("onlyWhenLowLightZ" strplant, "Plant" strplant " - Enable the Pump only, when there is no sunlight"); \
HomieSetting<long> mPumpCooldownInHours##plant = HomieSetting<long>("cooldownpump" strplant, "Plant" strplant " - How long to wait until the pump is activated again (minutes)"); \
HomieSetting<long> mSensorDry##plant = HomieSetting<long>("dry" strplant, "Plant " strplant "- Moist sensor dry threshold"); \
HomieSetting<long> mPumpAllowedHourRangeStart##plant = HomieSetting<long>("hourstart" strplant, "Plant" strplant " - Range pump allowed hour start (0-23)"); \
HomieSetting<long> mPumpAllowedHourRangeEnd##plant = HomieSetting<long>("hourend" strplant, "Plant" strplant " - Range pump allowed hour end (0-23)"); \
HomieSetting<bool> mPumpOnlyWhenLowLight##plant = HomieSetting<bool>("lowLight" strplant, "Plant" strplant " - Enable the Pump only, when there is no sunlight"); \
HomieSetting<long> mPumpCooldownInHours##plant = HomieSetting<long>("delay" strplant, "Plant" strplant " - How long to wait until the pump is activated again (minutes)"); \
PlantSettings_t mSetting##plant = {&mSensorDry##plant, &mPumpAllowedHourRangeStart##plant, &mPumpAllowedHourRangeEnd##plant, &mPumpOnlyWhenLowLight##plant, &mPumpCooldownInHours##plant}; \
/**< Generate all settings for one plant \
* \

3
esp32/src/PlantCtrl.cpp
View File

@@ -60,9 +60,6 @@ void Plant::addSenseValue(void)
int raw = analogRead(this->mPinSensor);
if(raw < MOIST_SENSOR_MAX_ADC && raw > MOIST_SENSOR_MIN_ADC){
this->moistureRaw.add(raw);
} else {
int plantId = this->mPlantId;
Serial << "ignoring sensor " << plantId << " value due to being strange " << raw << endl;
}
}

10
esp32/src/main.cpp
View File

@@ -548,10 +548,17 @@ void setup()
if (HomieInternals::MAX_CONFIG_SETTING_SIZE < MAX_CONFIG_SETTING_ITEMS)
{
//increase the config settings to 50 and the json to 3000
//increase the config settings
Serial << "Limits.hpp is not adjusted, please search for this string and increase" << endl;
return;
}
if (HomieInternals::MAX_JSON_CONFIG_FILE_SIZE < MAX_JSON_CONFIG_FILE_SIZE_CUSTOM)
{
//increase the config settings
Serial << "Limits.hpp is not adjusted, please search for this string and increase" << endl;
return;
}
/************************* Start One-Wire bus ***************/
int tempInitStartTime = millis();
@@ -607,7 +614,6 @@ void setup()
mConfigured = Homie.isConfigured();
if (mConfigured)
{
for (int i = 0; i < MAX_PLANTS; i++)
{
mPlants[i].advertise();