C3MA/PlantCtrl
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Plant of Things (POT)
249 Commits 6 Branches 3 Tags 78 MiB
HTML 78.5%
Rust 9.5%
C++ 6.7%
C 2.6%
TypeScript 1.5%
Other 1.1%
758ae3ef57
Go to file
C3MA Werkstatt 758ae3ef57 Describe different buttons should be used
2021-05-16 17:49:12 +02:00
board Describe different buttons should be used 2021-05-16 17:49:12 +02:00
esp32 Cleanup unused variables and code 2021-04-07 22:42:31 +02:00
esp32test/Esp32DeepSleepTest Address of tempsensors is published to MQTT 2021-04-07 20:27:42 +02:00
sheets Pinout ESP32 added 2021-03-04 21:07:30 +01:00
.gitignore Schematic Draft finished; Routing started 2020-09-14 19:20:33 +02:00
README.md Hall sensor updated 2021-03-04 21:07:11 +01:00

README.md

PlantCtrl

The following problems shall be solved with this project:

  • Solar Powered
  • Low Powered
  • Plant monitoring
  • Plant watering
  • IoT

Hardware

Open hardware design (powered by KiCAD). The complete PCB is stored in the board sub directory.

There the following components are connected:

  • ESP32 NodeMCU Module (the one of A-Z Delivery was used)
  • Lipo
  • 7 moist sensors
  • 7 pump
  • DC-DC convert (generating voltage from Lipo for pumps)
  • DS18B20 temperature sensors
  • water tank ultrasonic sensor (via JSN-SR04T-2.0)
  • DS2438 battery monitor
  • general purpose expansion pin

Software

The firmware for the controller is stored in esp32 sub directory.