C3MA/PlantCtrl
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Plant of Things (POT)
405 Commits 6 Branches 3 Tags 78 MiB
HTML 78.5%
Rust 9.5%
C++ 6.7%
C 2.6%
TypeScript 1.5%
Other 1.1%
bd2e4d3da0
Go to file
Ollo bd2e4d3da0 distance sensor is reset after powercycle
2023-03-22 21:06:14 +01:00
board stuff changed 2023-03-03 19:58:55 +01:00
esp32 Removed timeout 2023-03-10 23:37:50 +01:00
esp32test/Esp32DeepSleepTest distance sensor is reset after powercycle 2023-03-22 21:06:14 +01:00
hardware added epoxy form and sensor mod 2021-10-27 15:05:37 +02:00
sheets Pinout ESP32 added 2021-03-04 21:07:30 +01:00
.gitignore Schematic Draft finished; Routing started 2020-09-14 19:20:33 +02:00
README.md Update documentation 2021-10-15 21:59:47 +02:00

README.md

PlantCtrl

The following problems shall be solved with this project:

  • Solar Powered
  • Low Powered
  • Plant monitoring
  • Plant watering
  • IoT

Hardware

Open hardware design (powered by KiCAD). The complete PCB is stored in the board sub directory.

There the following components are connected:

  • ESP32 16MB flash required
  • Lipo monitoring (DS2438)
  • 7 moist sensors
  • 7 pump
  • DC-DC convert (generating voltage from Lipo for pumps)
  • DS18B20 temperature sensors
  • water level via laser distance sensor (VL53L0X)
  • DS2438 battery monitor
  • general purpose expansion pins

Software

The firmware for the controller is stored in esp32 sub directory.