file write test

rust/partitions.csv

@@ -1,5 +1,6 @@
-nvs,      data, nvs,     0x9000,  0x4000,
-otadata,  data, ota,     0xd000,  0x2000,
-phy_init, data, phy,     0xf000,  0x1000,
-ota_0,    app,  ota_0,   0x10000, 0x180000,
-ota_1,    app,  ota_1,   0x190000, 0x180000,
+nvs,      data, nvs,     ,        16k,
+otadata,  data, ota,     ,        8k,
+phy_init, data, phy,     ,        4k,
+factory,  app,  ota_0,   ,        1792K,
+ota_1,    app,  ota_1,   ,        1792K,
+storage,  data, spiffs,  ,        400K, 

rust/src/main.rs

@@ -1,20 +1,25 @@
-use std::{fs::File, io::Write};
+use std::{
+    ffi::CString,
+    fs::File,
+    io::{Read, Write},
+    str::from_utf8,
+};
 
-use chrono::{Datelike, Timelike, NaiveDateTime};
+use chrono::{Datelike, NaiveDateTime, Timelike};
 
+use anyhow::{Context, Result};
 use chrono_tz::Europe::Berlin;
 use esp_idf_hal::delay::Delay;
 use esp_idf_svc::http::server::EspHttpServer;
-use plant_hal::{PlantCtrlBoardInteraction, PlantHal, CreatePlantHal, PLANT_COUNT};
-use anyhow::{Context, Result};
+use plant_hal::{CreatePlantHal, PlantCtrlBoardInteraction, PlantHal, PLANT_COUNT};
 use webserver::webserver::httpd;
-pub mod plant_hal;
 mod config;
+pub mod plant_hal;
 mod webserver {
     pub mod webserver;
 }
 
-fn main() -> Result<()>{
+fn main() -> Result<()> {
     // It is necessary to call this function once. Otherwise some patches to the runtime
     // implemented by esp-idf-sys might not link properly. See https://github.com/esp-rs/esp-idf-template/issues/71
     esp_idf_svc::sys::link_patches();
@@ -69,7 +74,7 @@ fn main() -> Result<()>{
             },
         }
 
-//    let proceed = config.unwrap();
+    //    let proceed = config.unwrap();
 
         //check if we have a config file
             // if not found or parsing error -> error very fast blink general fault
@@ -109,19 +114,43 @@ fn main() -> Result<()>{
             initial_measurements_p[plant] = board.measure_moisture_hz(plant, plant_hal::Sensor::PUMP)?;
         }
 
-    match board.wifi("C3MA", Some("chaosimquadrat"), 10000) {
-        Ok(_) => println!("online mode"),
-        Err(_) => {
+        //match board.wifi("C3MA", Some("chaosimquadrat"), 10000) {
+        //    Ok(_) => println!("online mode"),
+        //    Err(_) => {
 
-            println!("Offline mode");
-        },
-    }
+    //            println!("Offline mode");
+            //},
+        //}
         //try connect wifi and do mqtt roundtrip
             // if no wifi, set general fault persistent
                 //if no mqtt, set general fault persistent
                 
+    unsafe {
+        let base_path = CString::new("/spiffs").unwrap();
+        let storage = CString::new("storage").unwrap();
 
-    match board.sntp(1000*120) {
+        let conf = esp_idf_sys::esp_vfs_spiffs_conf_t {
+            base_path: base_path.as_ptr(),
+            partition_label: storage.as_ptr(),
+            max_files: 5,
+            format_if_mount_failed: true,
+        };
+
+        let mount = esp_idf_sys::esp_vfs_spiffs_register(&conf);
+        println!("Mount returned {}", mount);
+    }
+    println!("writing");
+    let mut config_file = File::create("/spiffs/config.cfg")?;
+    config_file.write_all("test stuff".as_bytes())?;
+    config_file.flush()?;
+    println!("Reading");
+    let mut cfg = File::open("/spiffs/config.cfg")?;
+    let mut data: [u8; 512] = [0; 512];
+    let read = cfg.read(&mut data)?;
+    println!("Read file {}", from_utf8(&data[0..read])?);
+
+    /* 
+    match board.sntp(1000 * 120) {
         Ok(new_time) => cur = new_time,
         Err(err) => {
             println!("sntp error: {}", err);
@@ -131,8 +160,6 @@ fn main() -> Result<()>{
     let europe_time = cur.with_timezone(&Berlin);
     println!("Running logic at europe/berlin {}", europe_time);
 
-
-
     //if config battery mode
     //read battery level
     //if not possible set general fault persistent, but do continue
@@ -163,7 +190,6 @@ fn main() -> Result<()>{
     // state += notworking
     //set consecutive pumps+=1
 
-
     //check if during light time
     //lightstate += out of worktime
     //check battery level
@@ -173,7 +199,6 @@ fn main() -> Result<()>{
     //if no preventing lightstate, enable light
     //lightstate = active
 
-
     //keep webserver in scope
     let webserver = httpd(true);
     let delay = Delay::new_default();
@@ -181,9 +206,8 @@ fn main() -> Result<()>{
         //let freertos do shit
         delay.delay_ms(1001);
     }
-        
-        return Ok(())
-
+*/
+    return Ok(());
 }
 
 //error codes