From fb0ad6b1dc7ccc68a82005609a6ed163c5784774 Mon Sep 17 00:00:00 2001 From: Empire Date: Thu, 7 Dec 2023 02:33:17 +0100 Subject: [PATCH] file write test --- rust/partitions.csv | 11 +- rust/src/main.rs | 280 ++++++++++++++++++++++++-------------------- 2 files changed, 158 insertions(+), 133 deletions(-) diff --git a/rust/partitions.csv b/rust/partitions.csv index 303718c..2397298 100644 --- a/rust/partitions.csv +++ b/rust/partitions.csv @@ -1,5 +1,6 @@ -nvs, data, nvs, 0x9000, 0x4000, -otadata, data, ota, 0xd000, 0x2000, -phy_init, data, phy, 0xf000, 0x1000, -ota_0, app, ota_0, 0x10000, 0x180000, -ota_1, app, ota_1, 0x190000, 0x180000, \ No newline at end of file +nvs, data, nvs, , 16k, +otadata, data, ota, , 8k, +phy_init, data, phy, , 4k, +factory, app, ota_0, , 1792K, +ota_1, app, ota_1, , 1792K, +storage, data, spiffs, , 400K, \ No newline at end of file diff --git a/rust/src/main.rs b/rust/src/main.rs index fee2786..827ed09 100644 --- a/rust/src/main.rs +++ b/rust/src/main.rs @@ -1,20 +1,25 @@ -use std::{fs::File, io::Write}; +use std::{ + ffi::CString, + fs::File, + io::{Read, Write}, + str::from_utf8, +}; -use chrono::{Datelike, Timelike, NaiveDateTime}; +use chrono::{Datelike, NaiveDateTime, Timelike}; +use anyhow::{Context, Result}; use chrono_tz::Europe::Berlin; use esp_idf_hal::delay::Delay; use esp_idf_svc::http::server::EspHttpServer; -use plant_hal::{PlantCtrlBoardInteraction, PlantHal, CreatePlantHal, PLANT_COUNT}; -use anyhow::{Context, Result}; +use plant_hal::{CreatePlantHal, PlantCtrlBoardInteraction, PlantHal, PLANT_COUNT}; use webserver::webserver::httpd; -pub mod plant_hal; mod config; +pub mod plant_hal; mod webserver { pub mod webserver; } -fn main() -> Result<()>{ +fn main() -> Result<()> { // It is necessary to call this function once. Otherwise some patches to the runtime // implemented by esp-idf-sys might not link properly. See https://github.com/esp-rs/esp-idf-template/issues/71 esp_idf_svc::sys::link_patches(); @@ -26,102 +31,126 @@ fn main() -> Result<()>{ let git_hash = env!("VERGEN_GIT_DESCRIBE"); println!("Version useing git has {}", git_hash); - - let mut board = PlantHal::create()?; - println!("Board hal init"); - - let time = board.time(); - let mut cur = match time { - Ok(cur) => cur, - Err(err) => { - log::error!("time error {}", err); - NaiveDateTime::from_timestamp_millis(0).unwrap().and_utc() + let mut board = PlantHal::create()?; + + println!("Board hal init"); + + let time = board.time(); + let mut cur = match time { + Ok(cur) => cur, + Err(err) => { + log::error!("time error {}", err); + NaiveDateTime::from_timestamp_millis(0).unwrap().and_utc() + } + }; + //check if we know the time current > 2020 + if cur.year() < 2020 { + if board.is_day() { + //assume TZ safe times ;) + cur = *cur.with_hour(15).get_or_insert(cur); + } else { + cur = *cur.with_hour(3).get_or_insert(cur); + } } - }; - //check if we know the time current > 2020 - if cur.year() < 2020 { - if board.is_day() { - //assume TZ safe times ;) - cur = *cur.with_hour(15).get_or_insert(cur); - } else { - cur = *cur.with_hour(3).get_or_insert(cur); - } - } - println!("cur is {}", cur); + println!("cur is {}", cur); - - - //continous/interrupt? - //check if boot button is pressed, if longer than 5s delete config and reboot into config mode - let config = board.get_config(); - match config { - Ok(conf) => { - - }, - Err(err) => { - - }, - } + //continous/interrupt? + //check if boot button is pressed, if longer than 5s delete config and reboot into config mode -// let proceed = config.unwrap(); - - //check if we have a config file - // if not found or parsing error -> error very fast blink general fault - //if this happens after a firmeware upgrade (check image state), mark as invalid - //blink general fault error_reading_config_after_upgrade, reboot after - // open accesspoint with webserver for wlan mqtt setup - //blink general fault error_no_config_after_upgrade - //once config is set store it and reboot - //if proceed.tank_sensor_enabled() { - - //} - //is tank sensor enabled in config? - //measure tank level (without wifi due to interference) - //TODO this should be a result// detect invalid measurement value - let tank_value = board.tank_sensor_mv(); - match tank_value { - Ok(tank_raw) => { - println!("Tank sensor returned {}", tank_raw); + let config = board.get_config(); + match config { + Ok(conf) => { + }, - Err(_) => { - //if not possible value, blink general fault error_tank_sensor_fault - board.general_fault(true); - //set general fault persistent - //set tank sensor state to fault + Err(err) => { + }, } - - //measure each plant moisture - let mut initial_measurements_a: [i32;PLANT_COUNT] = [0;PLANT_COUNT]; - let mut initial_measurements_b: [i32;PLANT_COUNT] = [0;PLANT_COUNT]; - let mut initial_measurements_p: [i32;PLANT_COUNT] = [0;PLANT_COUNT]; - for plant in 0..PLANT_COUNT { - initial_measurements_a[plant] = board.measure_moisture_hz(plant, plant_hal::Sensor::A)?; - initial_measurements_b[plant] = board.measure_moisture_hz(plant, plant_hal::Sensor::B)?; - initial_measurements_p[plant] = board.measure_moisture_hz(plant, plant_hal::Sensor::PUMP)?; + // let proceed = config.unwrap(); + + //check if we have a config file + // if not found or parsing error -> error very fast blink general fault + //if this happens after a firmeware upgrade (check image state), mark as invalid + //blink general fault error_reading_config_after_upgrade, reboot after + // open accesspoint with webserver for wlan mqtt setup + //blink general fault error_no_config_after_upgrade + //once config is set store it and reboot + + //if proceed.tank_sensor_enabled() { + + //} + //is tank sensor enabled in config? + //measure tank level (without wifi due to interference) + //TODO this should be a result// detect invalid measurement value + let tank_value = board.tank_sensor_mv(); + match tank_value { + Ok(tank_raw) => { + println!("Tank sensor returned {}", tank_raw); + }, + Err(_) => { + //if not possible value, blink general fault error_tank_sensor_fault + board.general_fault(true); + //set general fault persistent + //set tank sensor state to fault + }, + } + + + //measure each plant moisture + let mut initial_measurements_a: [i32;PLANT_COUNT] = [0;PLANT_COUNT]; + let mut initial_measurements_b: [i32;PLANT_COUNT] = [0;PLANT_COUNT]; + let mut initial_measurements_p: [i32;PLANT_COUNT] = [0;PLANT_COUNT]; + for plant in 0..PLANT_COUNT { + initial_measurements_a[plant] = board.measure_moisture_hz(plant, plant_hal::Sensor::A)?; + initial_measurements_b[plant] = board.measure_moisture_hz(plant, plant_hal::Sensor::B)?; + initial_measurements_p[plant] = board.measure_moisture_hz(plant, plant_hal::Sensor::PUMP)?; + } + + //match board.wifi("C3MA", Some("chaosimquadrat"), 10000) { + // Ok(_) => println!("online mode"), + // Err(_) => { + + // println!("Offline mode"); + //}, + //} + //try connect wifi and do mqtt roundtrip + // if no wifi, set general fault persistent + //if no mqtt, set general fault persistent + + unsafe { + let base_path = CString::new("/spiffs").unwrap(); + let storage = CString::new("storage").unwrap(); + + let conf = esp_idf_sys::esp_vfs_spiffs_conf_t { + base_path: base_path.as_ptr(), + partition_label: storage.as_ptr(), + max_files: 5, + format_if_mount_failed: true, + }; + + let mount = esp_idf_sys::esp_vfs_spiffs_register(&conf); + println!("Mount returned {}", mount); } + println!("writing"); + let mut config_file = File::create("/spiffs/config.cfg")?; + config_file.write_all("test stuff".as_bytes())?; + config_file.flush()?; + println!("Reading"); + let mut cfg = File::open("/spiffs/config.cfg")?; + let mut data: [u8; 512] = [0; 512]; + let read = cfg.read(&mut data)?; + println!("Read file {}", from_utf8(&data[0..read])?); - match board.wifi("C3MA", Some("chaosimquadrat"), 10000) { - Ok(_) => println!("online mode"), - Err(_) => { - - println!("Offline mode"); - }, - } - //try connect wifi and do mqtt roundtrip - // if no wifi, set general fault persistent - //if no mqtt, set general fault persistent - - - match board.sntp(1000*120) { + /* + match board.sntp(1000 * 120) { Ok(new_time) => cur = new_time, Err(err) => { println!("sntp error: {}", err); @@ -131,62 +160,57 @@ fn main() -> Result<()>{ let europe_time = cur.with_timezone(&Berlin); println!("Running logic at europe/berlin {}", europe_time); - - //if config battery mode - //read battery level - //if not possible set general fault persistent, but do continue + //read battery level + //if not possible set general fault persistent, but do continue //else - //assume 12v and max capacity + //assume 12v and max capacity //if tank sensor is enabled - //if tank sensor fault abort if config require is set - //check if water is > minimum allowed || fault - //if not, set all plants requiring water to persistent fault + //if tank sensor fault abort if config require is set + //check if water is > minimum allowed || fault + //if not, set all plants requiring water to persistent fault //for each plant - //check if moisture is < target - //state += dry - //check if in cooldown - //state += cooldown - //check if consecutive pumps > limit - //state += notworking - //set plant fault persistent - - //pump one cycle - // set last pump time to now - //during pump state += active - //after pump check if Pump moisture value is increased by config delta x - // state -= active - // state += cooldown - // if not set plant error persistent fault - // state += notworking - //set consecutive pumps+=1 - + //check if moisture is < target + //state += dry + //check if in cooldown + //state += cooldown + //check if consecutive pumps > limit + //state += notworking + //set plant fault persistent + + //pump one cycle + // set last pump time to now + //during pump state += active + //after pump check if Pump moisture value is increased by config delta x + // state -= active + // state += cooldown + // if not set plant error persistent fault + // state += notworking + //set consecutive pumps+=1 //check if during light time - //lightstate += out of worktime + //lightstate += out of worktime //check battery level - //lightstate += battery empty + //lightstate += battery empty //check solar level if config requires - //lightstate += stillday + //lightstate += stillday //if no preventing lightstate, enable light - //lightstate = active - - - //keep webserver in scope - let webserver = httpd(true); - let delay = Delay::new_default(); - loop { - //let freertos do shit - delay.delay_ms(1001); - } - - return Ok(()) + //lightstate = active + //keep webserver in scope + let webserver = httpd(true); + let delay = Delay::new_default(); + loop { + //let freertos do shit + delay.delay_ms(1001); + } +*/ + return Ok(()); } //error codes //error_reading_config_after_upgrade //error_no_config_after_upgrade -//error_tank_sensor_fault \ No newline at end of file +//error_tank_sensor_fault