C3MA/PlantCtrl
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Plant of Things (POT)
167 Commits 6 Branches 3 Tags 79 MiB
HTML 78.5%
Rust 9.5%
C++ 6.7%
C 2.6%
TypeScript 1.5%
Other 1.1%
20ef7aa4e9
Go to file
Ollo 20ef7aa4e9 Added J8 for USB programming and POWER supply by USB; Lipo has to be disconnected!
2020-12-30 16:17:01 +01:00
board Added J8 for USB programming and POWER supply by USB; Lipo has to be disconnected! 2020-12-30 16:17:01 +01:00
esp32 Less debug output 2020-12-28 14:59:25 +01:00
esp32test/Esp32DeepSleepTest Temperature sensor 2020-10-16 15:04:21 +02:00
sheets improved schematic parts 2020-11-25 21:42:29 +01:00
.gitignore Schematic Draft finished; Routing started 2020-09-14 19:20:33 +02:00
README.md Desciption for hardware added 2020-11-06 17:59:52 +01:00

README.md

PlantCtrl

The following problems shall be solved with this project:

  • Solar Powered
  • Low Powered
  • Plant monitoring
  • Plant watering
  • IoT

Hardware

Open hardware design (powered by KiCAD). The complete PCB is stored in the board sub directory.

There the following components are connected:

  • ESP32 NodeMCU Module (the one of A-Z Delivery was used)
  • Lipo
  • 7 moist sensors
  • 7 pump
  • DC-DC convert (generating voltage from Lipo for pumps)
  • DS18B20 temperature sensors
  • water tank ultrasonic sensor (via HC_SR04)
  • general purpose expansion pin

Software

The firmware for the controller is stored in esp32 sub directory.