fix mqtt not starting webserver

add v1 revisio of bms
2026-04-06 12:54:18 +02:00 · 2026-04-06 12:40:52 +02:00
41 changed files with 30068 additions and 2973 deletions
--- a/Hardware/Controller/MPPT/MPPT.kicad_prl
+++ b/Hardware/Controller/MPPT/MPPT.kicad_prl
@@ -15,6 +15,7 @@
      "vias": 1.0,
      "zones": 0.6
    },
+    "prototype_zone_fills": false,
    "selection_filter": {
      "dimensions": true,
      "footprints": true,
@@ -53,6 +54,7 @@
    "zone_display_mode": 1
  },
  "git": {
+    "integration_disabled": false,
    "repo_type": "",
    "repo_username": "",
    "ssh_key": ""
@@ -105,6 +107,7 @@
    "filter_text": "",
    "group_by_constraint": false,
    "group_by_netclass": false,
+    "show_time_domain_details": false,
    "show_unconnected_nets": false,
    "show_zero_pad_nets": false,
    "sort_ascending": true,
@@ -115,6 +118,7 @@
    "files": []
  },
  "schematic": {
+    "hierarchy_collapsed": [],
    "selection_filter": {
      "graphics": true,
      "images": true,
@@ -122,6 +126,7 @@
      "lockedItems": false,
      "otherItems": true,
      "pins": true,
+      "ruleAreas": true,
      "symbols": true,
      "text": true,
      "wires": true
--- a/Hardware/Controller/MPPT/MPPT.kicad_pro
+++ b/Hardware/Controller/MPPT/MPPT.kicad_pro
@@ -3,6 +3,8 @@
    "3dviewports": [],
    "design_settings": {
      "defaults": {
+        "apply_defaults_to_fp_barcodes": false,
+        "apply_defaults_to_fp_dimensions": false,
        "apply_defaults_to_fp_fields": false,
        "apply_defaults_to_fp_shapes": false,
        "apply_defaults_to_fp_text": false,
@@ -82,6 +84,7 @@
        "extra_footprint": "warning",
        "footprint": "error",
        "footprint_filters_mismatch": "ignore",
+        "footprint_symbol_field_mismatch": "warning",
        "footprint_symbol_mismatch": "warning",
        "footprint_type_mismatch": "ignore",
        "hole_clearance": "error",
@@ -99,6 +102,7 @@
        "mirrored_text_on_front_layer": "warning",
        "missing_courtyard": "ignore",
        "missing_footprint": "warning",
+        "missing_tuning_profile": "warning",
        "net_conflict": "warning",
        "nonmirrored_text_on_back_layer": "warning",
        "npth_inside_courtyard": "ignore",
@@ -118,9 +122,12 @@
        "too_many_vias": "error",
        "track_angle": "error",
        "track_dangling": "warning",
+        "track_not_centered_on_via": "ignore",
+        "track_on_post_machined_layer": "error",
        "track_segment_length": "error",
        "track_width": "error",
        "tracks_crossing": "error",
+        "tuning_profile_track_geometries": "ignore",
        "unconnected_items": "error",
        "unresolved_variable": "error",
        "via_dangling": "warning",
@@ -235,17 +242,28 @@
      "zones_allow_external_fillets": false
    },
    "ipc2581": {
+      "bom_rev": "",
      "dist": "",
      "distpn": "",
      "internal_id": "",
      "mfg": "",
-      "mpn": ""
+      "mpn": "",
+      "sch_revision": ""
    },
    "layer_pairs": [],
    "layer_presets": [],
    "viewports": []
  },
  "boards": [],
+  "component_class_settings": {
+    "assignments": [],
+    "meta": {
+      "version": 0
+    },
+    "sheet_component_classes": {
+      "enabled": false
+    }
+  },
  "cvpcb": {
    "equivalence_files": []
  },
@@ -494,13 +512,14 @@
        "priority": 2147483647,
        "schematic_color": "rgba(0, 0, 0, 0.000)",
        "track_width": 0.2,
+        "tuning_profile": "",
        "via_diameter": 0.6,
        "via_drill": 0.3,
        "wire_width": 6
      }
    ],
    "meta": {
-      "version": 4
+      "version": 5
    },
    "net_colors": null,
    "netclass_assignments": null,
@@ -683,6 +702,7 @@
      "sort_asc": true,
      "sort_field": "Reference"
    },
+    "bus_aliases": {},
    "connection_grid_size": 50.0,
    "drawing": {
      "dashed_lines_dash_length_ratio": 12.0,
@@ -721,7 +741,14 @@
    "spice_save_all_dissipations": false,
    "spice_save_all_voltages": false,
    "subpart_first_id": 65,
-    "subpart_id_separator": 0
+    "subpart_id_separator": 0,
+    "top_level_sheets": [
+      {
+        "filename": "MPPT.kicad_sch",
+        "name": "MPPT",
+        "uuid": "00000000-0000-0000-0000-000000000000"
+      }
+    ]
  },
  "sheets": [
    [
@@ -729,5 +756,11 @@
      "Root"
    ]
  ],
-  "text_variables": {}
+  "text_variables": {},
+  "tuning_profiles": {
+    "meta": {
+      "version": 0
+    },
+    "tuning_profiles_impedance_geometric": []
+  }
 }
--- a/Hardware/Controller/MainBoard/PlantCtrlESP32.kicad_prl
+++ b/Hardware/Controller/MainBoard/PlantCtrlESP32.kicad_prl
@@ -15,6 +15,7 @@
      "vias": 1.0,
      "zones": 0.6
    },
+    "prototype_zone_fills": false,
    "ratsnest_display_mode": 0,
    "selection_filter": {
      "dimensions": true,
@@ -54,6 +55,7 @@
    "zone_display_mode": 1
  },
  "git": {
+    "integration_disabled": false,
    "repo_password": "",
    "repo_type": "",
    "repo_username": "",
@@ -113,6 +115,7 @@
    "filter_text": "",
    "group_by_constraint": false,
    "group_by_netclass": false,
+    "show_time_domain_details": false,
    "show_unconnected_nets": false,
    "show_zero_pad_nets": false,
    "sort_ascending": true,
@@ -123,6 +126,7 @@
    "files": []
  },
  "schematic": {
+    "hierarchy_collapsed": [],
    "selection_filter": {
      "graphics": true,
      "images": true,
@@ -130,6 +134,7 @@
      "lockedItems": false,
      "otherItems": true,
      "pins": true,
+      "ruleAreas": true,
      "symbols": true,
      "text": true,
      "wires": true
--- a/Hardware/Controller/MainBoard/PlantCtrlESP32.kicad_pro
+++ b/Hardware/Controller/MainBoard/PlantCtrlESP32.kicad_pro
@@ -3,6 +3,8 @@
    "3dviewports": [],
    "design_settings": {
      "defaults": {
+        "apply_defaults_to_fp_barcodes": false,
+        "apply_defaults_to_fp_dimensions": false,
        "apply_defaults_to_fp_fields": false,
        "apply_defaults_to_fp_shapes": false,
        "apply_defaults_to_fp_text": false,
@@ -78,6 +80,7 @@
        "extra_footprint": "warning",
        "footprint": "error",
        "footprint_filters_mismatch": "ignore",
+        "footprint_symbol_field_mismatch": "warning",
        "footprint_symbol_mismatch": "warning",
        "footprint_type_mismatch": "warning",
        "hole_clearance": "error",
@@ -96,6 +99,7 @@
        "mirrored_text_on_front_layer": "warning",
        "missing_courtyard": "ignore",
        "missing_footprint": "warning",
+        "missing_tuning_profile": "warning",
        "net_conflict": "warning",
        "nonmirrored_text_on_back_layer": "warning",
        "npth_inside_courtyard": "ignore",
@@ -115,9 +119,12 @@
        "too_many_vias": "error",
        "track_angle": "error",
        "track_dangling": "warning",
+        "track_not_centered_on_via": "ignore",
+        "track_on_post_machined_layer": "error",
        "track_segment_length": "error",
        "track_width": "error",
        "tracks_crossing": "error",
+        "tuning_profile_track_geometries": "ignore",
        "unconnected_items": "error",
        "unresolved_variable": "error",
        "via_dangling": "warning",
@@ -242,17 +249,28 @@
      "zones_use_no_outline": true
    },
    "ipc2581": {
+      "bom_rev": "",
      "dist": "",
      "distpn": "",
      "internal_id": "",
      "mfg": "",
-      "mpn": ""
+      "mpn": "",
+      "sch_revision": ""
    },
    "layer_pairs": [],
    "layer_presets": [],
    "viewports": []
  },
  "boards": [],
+  "component_class_settings": {
+    "assignments": [],
+    "meta": {
+      "version": 0
+    },
+    "sheet_component_classes": {
+      "enabled": false
+    }
+  },
  "cvpcb": {
    "equivalence_files": []
  },
@@ -443,11 +461,14 @@
      "duplicate_sheet_names": "error",
      "endpoint_off_grid": "ignore",
      "extra_units": "error",
+      "field_name_whitespace": "warning",
      "footprint_filter": "ignore",
      "footprint_link_issues": "warning",
      "four_way_junction": "ignore",
      "global_label_dangling": "warning",
+      "ground_pin_not_ground": "warning",
      "hier_label_mismatch": "error",
+      "isolated_pin_label": "warning",
      "label_dangling": "error",
      "label_multiple_wires": "warning",
      "lib_symbol_issues": "warning",
@@ -470,6 +491,7 @@
      "similar_power": "warning",
      "simulation_model_issue": "ignore",
      "single_global_label": "warning",
+      "stacked_pin_name": "warning",
      "unannotated": "error",
      "unconnected_wire_endpoint": "warning",
      "undefined_netclass": "error",
@@ -502,6 +524,7 @@
        "priority": 2147483647,
        "schematic_color": "rgba(0, 0, 0, 0.000)",
        "track_width": 1.2,
+        "tuning_profile": "",
        "via_diameter": 0.8,
        "via_drill": 0.4,
        "wire_width": 6
@@ -520,6 +543,7 @@
        "priority": 0,
        "schematic_color": "rgb(255, 4, 6)",
        "track_width": 1.0,
+        "tuning_profile": "",
        "via_diameter": 0.8,
        "via_drill": 0.4,
        "wire_width": 12
@@ -538,6 +562,7 @@
        "priority": 1,
        "schematic_color": "rgb(255, 153, 0)",
        "track_width": 0.2,
+        "tuning_profile": "",
        "via_diameter": 0.8,
        "via_drill": 0.4,
        "wire_width": 12
@@ -556,6 +581,7 @@
        "priority": 2,
        "schematic_color": "rgb(81, 255, 3)",
        "track_width": 1.2,
+        "tuning_profile": "",
        "via_diameter": 0.8,
        "via_drill": 0.4,
        "wire_width": 12
@@ -574,6 +600,7 @@
        "priority": 3,
        "schematic_color": "rgb(130, 130, 130)",
        "track_width": 1.2,
+        "tuning_profile": "",
        "via_diameter": 0.8,
        "via_drill": 0.4,
        "wire_width": 12
@@ -592,13 +619,14 @@
        "priority": 4,
        "schematic_color": "rgb(0, 0, 0)",
        "track_width": 0.5,
+        "tuning_profile": "",
        "via_diameter": 0.8,
        "via_drill": 0.4,
        "wire_width": 12
      }
    ],
    "meta": {
-      "version": 4
+      "version": 5
    },
    "net_colors": null,
    "netclass_assignments": null,
@@ -1077,6 +1105,10 @@
  },
  "schematic": {
    "annotate_start_num": 0,
+    "annotation": {
+      "method": 0,
+      "sort_order": 0
+    },
    "bom_export_filename": "PlantCtrlESP32.csv",
    "bom_fmt_presets": [],
    "bom_fmt_settings": {
@@ -1256,6 +1288,7 @@
      "sort_asc": true,
      "sort_field": "LCSC_PART_NUMBER"
    },
+    "bus_aliases": {},
    "connection_grid_size": 50.0,
    "drawing": {
      "dashed_lines_dash_length_ratio": 12.0,
@@ -1263,6 +1296,7 @@
      "default_line_thickness": 6.0,
      "default_text_size": 50.0,
      "field_names": [],
+      "hop_over_size_choice": 0,
      "intersheets_ref_own_page": false,
      "intersheets_ref_prefix": "",
      "intersheets_ref_short": false,
@@ -1295,6 +1329,7 @@
    },
    "page_layout_descr_file": "",
    "plot_directory": "/tmp/",
+    "reuse_designators": true,
    "space_save_all_events": true,
    "spice_adjust_passive_values": false,
    "spice_current_sheet_as_root": false,
@@ -1304,7 +1339,16 @@
    "spice_save_all_dissipations": false,
    "spice_save_all_voltages": false,
    "subpart_first_id": 65,
-    "subpart_id_separator": 0
+    "subpart_id_separator": 0,
+    "top_level_sheets": [
+      {
+        "filename": "PlantCtrlESP32.kicad_sch",
+        "name": "PlantCtrlESP32",
+        "uuid": "00000000-0000-0000-0000-000000000000"
+      }
+    ],
+    "used_designators": "",
+    "variants": []
  },
  "sheets": [
    [
@@ -1312,5 +1356,11 @@
      "Root"
    ]
  ],
-  "text_variables": {}
+  "text_variables": {},
+  "tuning_profiles": {
+    "meta": {
+      "version": 0
+    },
+    "tuning_profiles_impedance_geometric": []
+  }
 }
--- a/Hardware/Controller/PumpOutput/PumpOutput.kicad_prl
+++ b/Hardware/Controller/PumpOutput/PumpOutput.kicad_prl
@@ -15,6 +15,7 @@
      "vias": 1.0,
      "zones": 0.6
    },
+    "prototype_zone_fills": false,
    "selection_filter": {
      "dimensions": true,
      "footprints": true,
@@ -53,6 +54,7 @@
    "zone_display_mode": 0
  },
  "git": {
+    "integration_disabled": false,
    "repo_type": "",
    "repo_username": "",
    "ssh_key": ""
@@ -105,6 +107,7 @@
    "filter_text": "",
    "group_by_constraint": false,
    "group_by_netclass": false,
+    "show_time_domain_details": false,
    "show_unconnected_nets": false,
    "show_zero_pad_nets": false,
    "sort_ascending": true,
@@ -115,6 +118,7 @@
    "files": []
  },
  "schematic": {
+    "hierarchy_collapsed": [],
    "selection_filter": {
      "graphics": true,
      "images": true,
@@ -122,6 +126,7 @@
      "lockedItems": false,
      "otherItems": true,
      "pins": true,
+      "ruleAreas": true,
      "symbols": true,
      "text": true,
      "wires": true
--- a/Hardware/Controller/PumpOutput/PumpOutput.kicad_pro
+++ b/Hardware/Controller/PumpOutput/PumpOutput.kicad_pro
@@ -3,6 +3,8 @@
    "3dviewports": [],
    "design_settings": {
      "defaults": {
+        "apply_defaults_to_fp_barcodes": false,
+        "apply_defaults_to_fp_dimensions": false,
        "apply_defaults_to_fp_fields": false,
        "apply_defaults_to_fp_shapes": false,
        "apply_defaults_to_fp_text": false,
@@ -82,6 +84,7 @@
        "extra_footprint": "warning",
        "footprint": "error",
        "footprint_filters_mismatch": "ignore",
+        "footprint_symbol_field_mismatch": "warning",
        "footprint_symbol_mismatch": "warning",
        "footprint_type_mismatch": "warning",
        "hole_clearance": "error",
@@ -99,6 +102,7 @@
        "mirrored_text_on_front_layer": "warning",
        "missing_courtyard": "ignore",
        "missing_footprint": "warning",
+        "missing_tuning_profile": "warning",
        "net_conflict": "warning",
        "nonmirrored_text_on_back_layer": "warning",
        "npth_inside_courtyard": "ignore",
@@ -118,9 +122,12 @@
        "too_many_vias": "error",
        "track_angle": "error",
        "track_dangling": "warning",
+        "track_not_centered_on_via": "ignore",
+        "track_on_post_machined_layer": "error",
        "track_segment_length": "error",
        "track_width": "error",
        "tracks_crossing": "error",
+        "tuning_profile_track_geometries": "ignore",
        "unconnected_items": "error",
        "unresolved_variable": "error",
        "via_dangling": "warning",
@@ -236,17 +243,28 @@
      "zones_allow_external_fillets": false
    },
    "ipc2581": {
+      "bom_rev": "",
      "dist": "",
      "distpn": "",
      "internal_id": "",
      "mfg": "",
-      "mpn": ""
+      "mpn": "",
+      "sch_revision": ""
    },
    "layer_pairs": [],
    "layer_presets": [],
    "viewports": []
  },
  "boards": [],
+  "component_class_settings": {
+    "assignments": [],
+    "meta": {
+      "version": 0
+    },
+    "sheet_component_classes": {
+      "enabled": false
+    }
+  },
  "cvpcb": {
    "equivalence_files": []
  },
@@ -495,13 +513,14 @@
        "priority": 2147483647,
        "schematic_color": "rgba(0, 0, 0, 0.000)",
        "track_width": 0.2,
+        "tuning_profile": "",
        "via_diameter": 0.6,
        "via_drill": 0.3,
        "wire_width": 6
      }
    ],
    "meta": {
-      "version": 4
+      "version": 5
    },
    "net_colors": null,
    "netclass_assignments": null,
@@ -629,6 +648,7 @@
      "sort_asc": true,
      "sort_field": "Reference"
    },
+    "bus_aliases": {},
    "connection_grid_size": 50.0,
    "drawing": {
      "dashed_lines_dash_length_ratio": 12.0,
@@ -667,7 +687,14 @@
    "spice_save_all_dissipations": false,
    "spice_save_all_voltages": false,
    "subpart_first_id": 65,
-    "subpart_id_separator": 0
+    "subpart_id_separator": 0,
+    "top_level_sheets": [
+      {
+        "filename": "PumpOutput.kicad_sch",
+        "name": "PumpOutput",
+        "uuid": "00000000-0000-0000-0000-000000000000"
+      }
+    ]
  },
  "sheets": [
    [
@@ -675,5 +702,11 @@
      "Root"
    ]
  ],
-  "text_variables": {}
+  "text_variables": {},
+  "tuning_profiles": {
+    "meta": {
+      "version": 0
+    },
+    "tuning_profiles_impedance_geometric": []
+  }
 }
--- a/Hardware/Sensor/sensor.kicad_prl
+++ b/Hardware/Sensor/sensor.kicad_prl
@@ -15,6 +15,7 @@
      "vias": 1.0,
      "zones": 0.6
    },
+    "prototype_zone_fills": false,
    "selection_filter": {
      "dimensions": true,
      "footprints": true,
@@ -54,6 +55,7 @@
    "zone_display_mode": 0
  },
  "git": {
+    "integration_disabled": false,
    "repo_type": "",
    "repo_username": "",
    "ssh_key": ""
@@ -106,6 +108,7 @@
    "filter_text": "",
    "group_by_constraint": false,
    "group_by_netclass": false,
+    "show_time_domain_details": false,
    "show_unconnected_nets": false,
    "show_zero_pad_nets": false,
    "sort_ascending": true,
@@ -116,6 +119,7 @@
    "files": []
  },
  "schematic": {
+    "hierarchy_collapsed": [],
    "selection_filter": {
      "graphics": true,
      "images": true,
@@ -123,6 +127,7 @@
      "lockedItems": false,
      "otherItems": true,
      "pins": true,
+      "ruleAreas": true,
      "symbols": true,
      "text": true,
      "wires": true
--- a/Hardware/Sensor/sensor.kicad_pro
+++ b/Hardware/Sensor/sensor.kicad_pro
@@ -3,6 +3,8 @@
    "3dviewports": [],
    "design_settings": {
      "defaults": {
+        "apply_defaults_to_fp_barcodes": false,
+        "apply_defaults_to_fp_dimensions": false,
        "apply_defaults_to_fp_fields": false,
        "apply_defaults_to_fp_shapes": false,
        "apply_defaults_to_fp_text": false,
@@ -77,6 +79,7 @@
        "extra_footprint": "warning",
        "footprint": "error",
        "footprint_filters_mismatch": "warning",
+        "footprint_symbol_field_mismatch": "warning",
        "footprint_symbol_mismatch": "warning",
        "footprint_type_mismatch": "warning",
        "hole_clearance": "error",
@@ -94,6 +97,7 @@
        "mirrored_text_on_front_layer": "warning",
        "missing_courtyard": "warning",
        "missing_footprint": "warning",
+        "missing_tuning_profile": "warning",
        "net_conflict": "warning",
        "nonmirrored_text_on_back_layer": "warning",
        "npth_inside_courtyard": "warning",
@@ -113,9 +117,12 @@
        "too_many_vias": "error",
        "track_angle": "error",
        "track_dangling": "warning",
+        "track_not_centered_on_via": "ignore",
+        "track_on_post_machined_layer": "error",
        "track_segment_length": "error",
        "track_width": "error",
        "tracks_crossing": "error",
+        "tuning_profile_track_geometries": "ignore",
        "unconnected_items": "error",
        "unresolved_variable": "error",
        "via_dangling": "warning",
@@ -227,17 +234,28 @@
      "zones_allow_external_fillets": false
    },
    "ipc2581": {
+      "bom_rev": "",
      "dist": "",
      "distpn": "",
      "internal_id": "",
      "mfg": "",
-      "mpn": ""
+      "mpn": "",
+      "sch_revision": ""
    },
    "layer_pairs": [],
    "layer_presets": [],
    "viewports": []
  },
  "boards": [],
+  "component_class_settings": {
+    "assignments": [],
+    "meta": {
+      "version": 0
+    },
+    "sheet_component_classes": {
+      "enabled": false
+    }
+  },
  "cvpcb": {
    "equivalence_files": []
  },
@@ -486,13 +504,14 @@
        "priority": 2147483647,
        "schematic_color": "rgba(0, 0, 0, 0.000)",
        "track_width": 0.2,
+        "tuning_profile": "",
        "via_diameter": 0.6,
        "via_drill": 0.3,
        "wire_width": 6
      }
    ],
    "meta": {
-      "version": 4
+      "version": 5
    },
    "net_colors": null,
    "netclass_assignments": null,
@@ -861,6 +880,7 @@
      "sort_asc": true,
      "sort_field": "Reference"
    },
+    "bus_aliases": {},
    "connection_grid_size": 50.0,
    "drawing": {
      "dashed_lines_dash_length_ratio": 12.0,
@@ -899,7 +919,14 @@
    "spice_save_all_dissipations": false,
    "spice_save_all_voltages": false,
    "subpart_first_id": 65,
-    "subpart_id_separator": 0
+    "subpart_id_separator": 0,
+    "top_level_sheets": [
+      {
+        "filename": "sensor.kicad_sch",
+        "name": "sensor",
+        "uuid": "00000000-0000-0000-0000-000000000000"
+      }
+    ]
  },
  "sheets": [
    [
@@ -907,5 +934,11 @@
      "Root"
    ]
  ],
-  "text_variables": {}
+  "text_variables": {},
+  "tuning_profiles": {
+    "meta": {
+      "version": 0
+    },
+    "tuning_profiles_impedance_geometric": []
+  }
 }
--- a/Hardware/open-bms/bms/bms.kicad_pcb
+++ b/Hardware/open-bms/bms/bms.kicad_pcb
--- a/Hardware/open-bms/bms/bms.kicad_prl
+++ b/Hardware/open-bms/bms/bms.kicad_prl
@@ -2,7 +2,7 @@
  "board": {
    "active_layer": 0,
    "active_layer_preset": "",
-    "auto_track_width": true,
+    "auto_track_width": false,
    "hidden_netclasses": [],
    "hidden_nets": [],
    "high_contrast_mode": 0,
@@ -15,6 +15,7 @@
      "vias": 1.0,
      "zones": 0.6
    },
+    "prototype_zone_fills": false,
    "selection_filter": {
      "dimensions": true,
      "footprints": true,
@@ -54,6 +55,7 @@
    "zone_display_mode": 0
  },
  "git": {
+    "integration_disabled": false,
    "repo_type": "",
    "repo_username": "",
    "ssh_key": ""
@@ -63,8 +65,30 @@
    "version": 5
  },
  "net_inspector_panel": {
-    "col_hidden": [],
-    "col_order": [],
+    "col_hidden": [
+      false,
+      false,
+      false,
+      false,
+      false,
+      false,
+      false,
+      false,
+      false,
+      false
+    ],
+    "col_order": [
+      0,
+      1,
+      2,
+      3,
+      4,
+      5,
+      6,
+      7,
+      8,
+      9
+    ],
    "col_widths": [],
    "custom_group_rules": [],
    "expanded_rows": [],
@@ -73,6 +97,7 @@
    "filter_text": "",
    "group_by_constraint": false,
    "group_by_netclass": false,
+    "show_time_domain_details": false,
    "show_unconnected_nets": false,
    "show_zero_pad_nets": false,
    "sort_ascending": true,
@@ -83,6 +108,7 @@
    "files": []
  },
  "schematic": {
+    "hierarchy_collapsed": [],
    "selection_filter": {
      "graphics": true,
      "images": true,
@@ -90,6 +116,7 @@
      "lockedItems": false,
      "otherItems": true,
      "pins": true,
+      "ruleAreas": true,
      "symbols": true,
      "text": true,
      "wires": true
--- a/Hardware/open-bms/bms/bms.kicad_pro
+++ b/Hardware/open-bms/bms/bms.kicad_pro
@@ -2,25 +2,262 @@
  "board": {
    "3dviewports": [],
    "design_settings": {
-      "defaults": {},
-      "diff_pair_dimensions": [],
+      "defaults": {
+        "apply_defaults_to_fp_barcodes": false,
+        "apply_defaults_to_fp_dimensions": false,
+        "apply_defaults_to_fp_fields": false,
+        "apply_defaults_to_fp_shapes": false,
+        "apply_defaults_to_fp_text": false,
+        "board_outline_line_width": 0.05,
+        "copper_line_width": 0.2,
+        "copper_text_italic": false,
+        "copper_text_size_h": 1.5,
+        "copper_text_size_v": 1.5,
+        "copper_text_thickness": 0.3,
+        "copper_text_upright": false,
+        "courtyard_line_width": 0.05,
+        "dimension_precision": 4,
+        "dimension_units": 3,
+        "dimensions": {
+          "arrow_length": 1270000,
+          "extension_offset": 500000,
+          "keep_text_aligned": true,
+          "suppress_zeroes": true,
+          "text_position": 0,
+          "units_format": 0
+        },
+        "fab_line_width": 0.1,
+        "fab_text_italic": false,
+        "fab_text_size_h": 1.0,
+        "fab_text_size_v": 1.0,
+        "fab_text_thickness": 0.15,
+        "fab_text_upright": false,
+        "other_line_width": 0.1,
+        "other_text_italic": false,
+        "other_text_size_h": 1.0,
+        "other_text_size_v": 1.0,
+        "other_text_thickness": 0.15,
+        "other_text_upright": false,
+        "pads": {
+          "drill": 0.8,
+          "height": 1.27,
+          "width": 2.54
+        },
+        "silk_line_width": 0.1,
+        "silk_text_italic": false,
+        "silk_text_size_h": 1.0,
+        "silk_text_size_v": 1.0,
+        "silk_text_thickness": 0.1,
+        "silk_text_upright": false,
+        "zones": {
+          "min_clearance": 0.5
+        }
+      },
+      "diff_pair_dimensions": [
+        {
+          "gap": 0.0,
+          "via_gap": 0.0,
+          "width": 0.0
+        }
+      ],
      "drc_exclusions": [],
-      "rules": {},
-      "track_widths": [],
-      "via_dimensions": []
+      "meta": {
+        "version": 2
+      },
+      "rule_severities": {
+        "annular_width": "error",
+        "clearance": "error",
+        "connection_width": "warning",
+        "copper_edge_clearance": "error",
+        "copper_sliver": "warning",
+        "courtyards_overlap": "error",
+        "creepage": "error",
+        "diff_pair_gap_out_of_range": "error",
+        "diff_pair_uncoupled_length_too_long": "error",
+        "drill_out_of_range": "error",
+        "duplicate_footprints": "warning",
+        "extra_footprint": "warning",
+        "footprint": "error",
+        "footprint_filters_mismatch": "ignore",
+        "footprint_symbol_field_mismatch": "warning",
+        "footprint_symbol_mismatch": "warning",
+        "footprint_type_mismatch": "ignore",
+        "hole_clearance": "error",
+        "hole_to_hole": "warning",
+        "holes_co_located": "warning",
+        "invalid_outline": "error",
+        "isolated_copper": "warning",
+        "item_on_disabled_layer": "error",
+        "items_not_allowed": "error",
+        "length_out_of_range": "error",
+        "lib_footprint_issues": "warning",
+        "lib_footprint_mismatch": "warning",
+        "malformed_courtyard": "error",
+        "microvia_drill_out_of_range": "error",
+        "mirrored_text_on_front_layer": "warning",
+        "missing_courtyard": "ignore",
+        "missing_footprint": "warning",
+        "missing_tuning_profile": "warning",
+        "net_conflict": "warning",
+        "nonmirrored_text_on_back_layer": "warning",
+        "npth_inside_courtyard": "error",
+        "padstack": "warning",
+        "pth_inside_courtyard": "error",
+        "shorting_items": "error",
+        "silk_edge_clearance": "ignore",
+        "silk_over_copper": "warning",
+        "silk_overlap": "warning",
+        "skew_out_of_range": "error",
+        "solder_mask_bridge": "error",
+        "starved_thermal": "error",
+        "text_height": "warning",
+        "text_on_edge_cuts": "error",
+        "text_thickness": "warning",
+        "through_hole_pad_without_hole": "error",
+        "too_many_vias": "error",
+        "track_angle": "error",
+        "track_dangling": "warning",
+        "track_not_centered_on_via": "ignore",
+        "track_on_post_machined_layer": "error",
+        "track_segment_length": "error",
+        "track_width": "error",
+        "tracks_crossing": "error",
+        "tuning_profile_track_geometries": "ignore",
+        "unconnected_items": "error",
+        "unresolved_variable": "error",
+        "via_dangling": "warning",
+        "zones_intersect": "error"
+      },
+      "rules": {
+        "max_error": 0.005,
+        "min_clearance": 0.0,
+        "min_connection": 0.0,
+        "min_copper_edge_clearance": 0.5,
+        "min_groove_width": 0.0,
+        "min_hole_clearance": 0.25,
+        "min_hole_to_hole": 0.25,
+        "min_microvia_diameter": 0.2,
+        "min_microvia_drill": 0.1,
+        "min_resolved_spokes": 2,
+        "min_silk_clearance": 0.0,
+        "min_text_height": 0.8,
+        "min_text_thickness": 0.08,
+        "min_through_hole_diameter": 0.3,
+        "min_track_width": 0.2,
+        "min_via_annular_width": 0.1,
+        "min_via_diameter": 0.5,
+        "solder_mask_to_copper_clearance": 0.005,
+        "use_height_for_length_calcs": true
+      },
+      "teardrop_options": [
+        {
+          "td_onpthpad": true,
+          "td_onroundshapesonly": false,
+          "td_onsmdpad": true,
+          "td_ontrackend": false,
+          "td_onvia": true
+        }
+      ],
+      "teardrop_parameters": [
+        {
+          "td_allow_use_two_tracks": true,
+          "td_curve_segcount": 0,
+          "td_height_ratio": 1.0,
+          "td_length_ratio": 0.5,
+          "td_maxheight": 2.0,
+          "td_maxlen": 1.0,
+          "td_on_pad_in_zone": false,
+          "td_target_name": "td_round_shape",
+          "td_width_to_size_filter_ratio": 0.9
+        },
+        {
+          "td_allow_use_two_tracks": true,
+          "td_curve_segcount": 0,
+          "td_height_ratio": 1.0,
+          "td_length_ratio": 0.5,
+          "td_maxheight": 2.0,
+          "td_maxlen": 1.0,
+          "td_on_pad_in_zone": false,
+          "td_target_name": "td_rect_shape",
+          "td_width_to_size_filter_ratio": 0.9
+        },
+        {
+          "td_allow_use_two_tracks": true,
+          "td_curve_segcount": 0,
+          "td_height_ratio": 1.0,
+          "td_length_ratio": 0.5,
+          "td_maxheight": 2.0,
+          "td_maxlen": 1.0,
+          "td_on_pad_in_zone": false,
+          "td_target_name": "td_track_end",
+          "td_width_to_size_filter_ratio": 0.9
+        }
+      ],
+      "track_widths": [
+        0.0,
+        0.2,
+        0.5,
+        1.0,
+        2.0,
+        5.0
+      ],
+      "tuning_pattern_settings": {
+        "diff_pair_defaults": {
+          "corner_radius_percentage": 80,
+          "corner_style": 1,
+          "max_amplitude": 1.0,
+          "min_amplitude": 0.2,
+          "single_sided": false,
+          "spacing": 1.0
+        },
+        "diff_pair_skew_defaults": {
+          "corner_radius_percentage": 80,
+          "corner_style": 1,
+          "max_amplitude": 1.0,
+          "min_amplitude": 0.2,
+          "single_sided": false,
+          "spacing": 0.6
+        },
+        "single_track_defaults": {
+          "corner_radius_percentage": 80,
+          "corner_style": 1,
+          "max_amplitude": 1.0,
+          "min_amplitude": 0.2,
+          "single_sided": false,
+          "spacing": 0.6
+        }
+      },
+      "via_dimensions": [
+        {
+          "diameter": 0.0,
+          "drill": 0.0
+        }
+      ],
+      "zones_allow_external_fillets": false
    },
    "ipc2581": {
+      "bom_rev": "",
      "dist": "",
      "distpn": "",
      "internal_id": "",
      "mfg": "",
-      "mpn": ""
+      "mpn": "",
+      "sch_revision": ""
    },
    "layer_pairs": [],
    "layer_presets": [],
    "viewports": []
  },
  "boards": [],
+  "component_class_settings": {
+    "assignments": [],
+    "meta": {
+      "version": 0
+    },
+    "sheet_component_classes": {
+      "enabled": false
+    }
+  },
  "cvpcb": {
    "equivalence_files": []
  },
@@ -210,11 +447,14 @@
      "duplicate_sheet_names": "error",
      "endpoint_off_grid": "warning",
      "extra_units": "error",
+      "field_name_whitespace": "warning",
      "footprint_filter": "ignore",
      "footprint_link_issues": "warning",
      "four_way_junction": "ignore",
      "global_label_dangling": "warning",
+      "ground_pin_not_ground": "warning",
      "hier_label_mismatch": "error",
+      "isolated_pin_label": "warning",
      "label_dangling": "error",
      "label_multiple_wires": "warning",
      "lib_symbol_issues": "warning",
@@ -237,6 +477,7 @@
      "similar_power": "warning",
      "simulation_model_issue": "ignore",
      "single_global_label": "ignore",
+      "stacked_pin_name": "warning",
      "unannotated": "error",
      "unconnected_wire_endpoint": "warning",
      "undefined_netclass": "error",
@@ -269,13 +510,14 @@
        "priority": 2147483647,
        "schematic_color": "rgba(0, 0, 0, 0.000)",
        "track_width": 0.2,
+        "tuning_profile": "",
        "via_diameter": 0.6,
        "via_drill": 0.3,
        "wire_width": 6
      }
    ],
    "meta": {
-      "version": 4
+      "version": 5
    },
    "net_colors": null,
    "netclass_assignments": null,
@@ -297,6 +539,10 @@
  },
  "schematic": {
    "annotate_start_num": 0,
+    "annotation": {
+      "method": 0,
+      "sort_order": 0
+    },
    "bom_export_filename": "${PROJECTNAME}.csv",
    "bom_fmt_presets": [],
    "bom_fmt_settings": {
@@ -359,15 +605,298 @@
          "label": "Datasheet",
          "name": "Datasheet",
          "show": true
+        },
+        {
+          "group_by": false,
+          "label": "Actuator/Cap Color",
+          "name": "Actuator/Cap Color",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Attrition Qty",
+          "name": "Attrition Qty",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Capacitance",
+          "name": "Capacitance",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Category",
+          "name": "Category",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Circuit",
+          "name": "Circuit",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Class",
+          "name": "Class",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Contact Current",
+          "name": "Contact Current",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Diode Configuration",
+          "name": "Diode Configuration",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Field5",
+          "name": "Field5",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Forward Voltage (Vf@If)",
+          "name": "Forward Voltage (Vf@If)",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Insulation Resistance",
+          "name": "Insulation Resistance",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "LCSC",
+          "name": "LCSC",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "LCSC_PART_NUMBER",
+          "name": "LCSC_PART_NUMBER",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Manufacturer",
+          "name": "Manufacturer",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Mechanical Life",
+          "name": "Mechanical Life",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Minimum Qty",
+          "name": "Minimum Qty",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Mounting Style",
+          "name": "Mounting Style",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Operating Force",
+          "name": "Operating Force",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Operating Temperature",
+          "name": "Operating Temperature",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Operating Temperature Range",
+          "name": "Operating Temperature Range",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Overload Voltage (Max)",
+          "name": "Overload Voltage (Max)",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Part",
+          "name": "Part",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Pin Style",
+          "name": "Pin Style",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Power(Watts)",
+          "name": "Power(Watts)",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Price",
+          "name": "Price",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Process",
+          "name": "Process",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Rectified Current",
+          "name": "Rectified Current",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Resistance",
+          "name": "Resistance",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Reverse Leakage Current",
+          "name": "Reverse Leakage Current",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Reverse Voltage (Vr)",
+          "name": "Reverse Voltage (Vr)",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Sim.Device",
+          "name": "Sim.Device",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Sim.Pins",
+          "name": "Sim.Pins",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Sim.Type",
+          "name": "Sim.Type",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Stock",
+          "name": "Stock",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Strike Gundam",
+          "name": "Strike Gundam",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Switch Height",
+          "name": "Switch Height",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Switch Length",
+          "name": "Switch Length",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Switch Width",
+          "name": "Switch Width",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Temperature Coefficient",
+          "name": "Temperature Coefficient",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Tolerance",
+          "name": "Tolerance",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Type",
+          "name": "Type",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Voltage Rated",
+          "name": "Voltage Rated",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Voltage Rating (Dc)",
+          "name": "Voltage Rating (Dc)",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "With Lamp",
+          "name": "With Lamp",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Actuator Style",
+          "name": "Actuator Style",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Description",
+          "name": "Description",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "#",
+          "name": "${ITEM_NUMBER}",
+          "show": false
        }
      ],
      "filter_string": "",
      "group_symbols": true,
      "include_excluded_from_bom": true,
-      "name": "Default Editing",
+      "name": "",
      "sort_asc": true,
      "sort_field": "Reference"
    },
+    "bus_aliases": {},
    "connection_grid_size": 50.0,
    "drawing": {
      "dashed_lines_dash_length_ratio": 12.0,
@@ -375,6 +904,7 @@
      "default_line_thickness": 6.0,
      "default_text_size": 50.0,
      "field_names": [],
+      "hop_over_size_choice": 0,
      "intersheets_ref_own_page": false,
      "intersheets_ref_prefix": "",
      "intersheets_ref_short": false,
@@ -398,6 +928,7 @@
    "net_format_name": "",
    "page_layout_descr_file": "",
    "plot_directory": "",
+    "reuse_designators": true,
    "space_save_all_events": true,
    "spice_current_sheet_as_root": false,
    "spice_external_command": "spice \"%I\"",
@@ -406,13 +937,28 @@
    "spice_save_all_dissipations": false,
    "spice_save_all_voltages": false,
    "subpart_first_id": 65,
-    "subpart_id_separator": 0
+    "subpart_id_separator": 0,
+    "top_level_sheets": [
+      {
+        "filename": "bms.kicad_sch",
+        "name": "bms",
+        "uuid": "7972d0e7-2611-420d-b298-ef8307db6186"
+      }
+    ],
+    "used_designators": "",
+    "variants": []
  },
  "sheets": [
    [
      "7972d0e7-2611-420d-b298-ef8307db6186",
-      "Root"
+      "bms"
    ]
  ],
-  "text_variables": {}
+  "text_variables": {},
+  "tuning_profiles": {
+    "meta": {
+      "version": 0
+    },
+    "tuning_profiles_impedance_geometric": []
+  }
 }
--- a/Hardware/open-bms/bms/bms.kicad_sch
+++ b/Hardware/open-bms/bms/bms.kicad_sch
--- a/Hardware/open-bms/bms/fabrication-toolkit-options.json
+++ b/Hardware/open-bms/bms/fabrication-toolkit-options.json
@@ -0,0 +1 @@
+{"ARCHIVE_NAME": "", "EXTRA_LAYERS": "", "ALL_ACTIVE_LAYERS": false, "EXTEND_EDGE_CUT": false, "ALTERNATIVE_EDGE_CUT": false, "AUTO TRANSLATE": true, "AUTO FILL": true, "EXCLUDE DNP": false, "OPEN BROWSER": true, "NO_BACKUP_OPT": false}
--- a/Hardware/open-bms/bms/footprints/amass/AMASS_XT30UPB+DATA-M_1x02_P5.0mm_Vertical.kicad_mod
+++ b/Hardware/open-bms/bms/footprints/amass/AMASS_XT30UPB+DATA-M_1x02_P5.0mm_Vertical.kicad_mod
@@ -0,0 +1,337 @@
+(footprint "AMASS_XT30UPB+DATA-M_1x02_P5.0mm_Vertical"
+	(version 20240108)
+	(generator "pcbnew")
+	(generator_version "8.0")
+	(layer "F.Cu")
+	(descr "Connector XT30 Vertical PCB Male, https://www.tme.eu/en/Document/4acc913878197f8c2e30d4b8cdc47230/XT30UPB%20SPEC.pdf")
+	(tags "RC Connector XT30")
+	(property "Reference" "REF**"
+		(at 2.5 -4 0)
+		(layer "F.SilkS")
+		(uuid "f7510d54-dcb1-4c3b-b842-cd250a98370c")
+		(effects
+			(font
+				(size 1 1)
+				(thickness 0.15)
+			)
+		)
+	)
+	(property "Value" "AMASS_XT30UPB+DATA-M_1x02_P5.0mm_Vertical"
+		(at 2.5 4 0)
+		(layer "F.Fab")
+		(uuid "c5a8a60c-4ea1-4401-a30c-34d36be61c07")
+		(effects
+			(font
+				(size 1 1)
+				(thickness 0.15)
+			)
+		)
+	)
+	(property "Footprint" ""
+		(at 0 0 0)
+		(unlocked yes)
+		(layer "F.Fab")
+		(hide yes)
+		(uuid "8fb27306-c085-4316-b554-4ba9be794054")
+		(effects
+			(font
+				(size 1.27 1.27)
+				(thickness 0.15)
+			)
+		)
+	)
+	(property "Datasheet" ""
+		(at 0 0 0)
+		(unlocked yes)
+		(layer "F.Fab")
+		(hide yes)
+		(uuid "74b71861-05d2-4229-8e81-25952aaaef7e")
+		(effects
+			(font
+				(size 1.27 1.27)
+				(thickness 0.15)
+			)
+		)
+	)
+	(property "Description" ""
+		(at 0 0 0)
+		(unlocked yes)
+		(layer "F.Fab")
+		(hide yes)
+		(uuid "a1d16ecc-7e64-48c4-b772-a9255380960d")
+		(effects
+			(font
+				(size 1.27 1.27)
+				(thickness 0.15)
+			)
+		)
+	)
+	(attr through_hole)
+	(fp_line
+		(start -2.71 -1.41)
+		(end -2.71 1.41)
+		(stroke
+			(width 0.12)
+			(type solid)
+		)
+		(layer "F.SilkS")
+		(uuid "e96c6ad2-9ca6-4df1-b35b-76e090d7ff4e")
+	)
+	(fp_line
+		(start -2.71 -1.41)
+		(end -1.01 -2.71)
+		(stroke
+			(width 0.12)
+			(type solid)
+		)
+		(layer "F.SilkS")
+		(uuid "0784d204-0a48-4a2b-8085-50e1ff7a1493")
+	)
+	(fp_line
+		(start -2.71 1.41)
+		(end -1.01 2.71)
+		(stroke
+			(width 0.12)
+			(type solid)
+		)
+		(layer "F.SilkS")
+		(uuid "db750970-e424-4a8e-a882-20a90baabffc")
+	)
+	(fp_line
+		(start -1.01 -2.71)
+		(end 7.71 -2.71)
+		(stroke
+			(width 0.12)
+			(type solid)
+		)
+		(layer "F.SilkS")
+		(uuid "9f23420e-db87-438c-a708-676a0616966e")
+	)
+	(fp_line
+		(start -1.01 2.71)
+		(end 7.71 2.71)
+		(stroke
+			(width 0.12)
+			(type solid)
+		)
+		(layer "F.SilkS")
+		(uuid "2ba574e3-9de5-4d7d-9777-e19e6fa702e7")
+	)
+	(fp_line
+		(start 7.71 -2.71)
+		(end 7.71 2.71)
+		(stroke
+			(width 0.12)
+			(type solid)
+		)
+		(layer "F.SilkS")
+		(uuid "2018cc6b-6115-4763-8b7c-54b60affbda7")
+	)
+	(fp_rect
+		(start -6.3 -2.71)
+		(end 7.71 2.7)
+		(stroke
+			(width 0.1)
+			(type default)
+		)
+		(fill none)
+		(layer "F.SilkS")
+		(uuid "11aac399-c862-4b67-9828-087abeea5b1b")
+	)
+	(fp_line
+		(start -3.1 -1.8)
+		(end -3.1 1.8)
+		(stroke
+			(width 0.05)
+			(type solid)
+		)
+		(layer "F.CrtYd")
+		(uuid "06ae69d8-1372-4524-8b1a-27a2f062f1c5")
+	)
+	(fp_line
+		(start -3.1 -1.8)
+		(end -1.4 -3.1)
+		(stroke
+			(width 0.05)
+			(type solid)
+		)
+		(layer "F.CrtYd")
+		(uuid "ae869a92-c688-4f2b-82ca-0578106a035a")
+	)
+	(fp_line
+		(start -3.1 1.8)
+		(end -1.4 3.1)
+		(stroke
+			(width 0.05)
+			(type solid)
+		)
+		(layer "F.CrtYd")
+		(uuid "cac6d927-6ba1-4095-825b-f94ee0d7abe9")
+	)
+	(fp_line
+		(start -1.4 -3.1)
+		(end 8.1 -3.1)
+		(stroke
+			(width 0.05)
+			(type solid)
+		)
+		(layer "F.CrtYd")
+		(uuid "fb4fa373-5492-4717-a9fe-7b69f4c53ba0")
+	)
+	(fp_line
+		(start -1.4 3.1)
+		(end 8.1 3.1)
+		(stroke
+			(width 0.05)
+			(type solid)
+		)
+		(layer "F.CrtYd")
+		(uuid "70296c77-546d-44a2-b5d3-e6dc58cf713b")
+	)
+	(fp_line
+		(start 8.1 -3.1)
+		(end 8.1 3.1)
+		(stroke
+			(width 0.05)
+			(type solid)
+		)
+		(layer "F.CrtYd")
+		(uuid "64764a09-de32-4f35-b54a-17e44810370f")
+	)
+	(fp_line
+		(start -2.6 -1.3)
+		(end -2.6 1.3)
+		(stroke
+			(width 0.1)
+			(type solid)
+		)
+		(layer "F.Fab")
+		(uuid "8d7ee7cb-5dda-453f-aa9a-6420c87f1b8e")
+	)
+	(fp_line
+		(start -2.6 -1.3)
+		(end -0.9 -2.6)
+		(stroke
+			(width 0.1)
+			(type solid)
+		)
+		(layer "F.Fab")
+		(uuid "2fa3ad90-36bb-4374-95ed-e44e50c7e385")
+	)
+	(fp_line
+		(start -2.6 1.3)
+		(end -0.9 2.6)
+		(stroke
+			(width 0.1)
+			(type solid)
+		)
+		(layer "F.Fab")
+		(uuid "2e4f8556-ffc2-4791-91da-e68c3513337e")
+	)
+	(fp_line
+		(start -0.9 -2.6)
+		(end 7.6 -2.6)
+		(stroke
+			(width 0.1)
+			(type solid)
+		)
+		(layer "F.Fab")
+		(uuid "cb9cd8af-1997-41db-b9fe-8982960ac6db")
+	)
+	(fp_line
+		(start -0.9 2.6)
+		(end 7.6 2.6)
+		(stroke
+			(width 0.1)
+			(type solid)
+		)
+		(layer "F.Fab")
+		(uuid "ea8a6c02-e974-4677-a854-a0891c323245")
+	)
+	(fp_line
+		(start 7.6 -2.6)
+		(end 7.6 2.6)
+		(stroke
+			(width 0.1)
+			(type solid)
+		)
+		(layer "F.Fab")
+		(uuid "c66f305c-0d56-4591-bc02-23252ad20321")
+	)
+	(fp_text user "-"
+		(at -4 0 0)
+		(layer "F.SilkS")
+		(uuid "c119570a-6846-48dc-9422-0b5665ab2df6")
+		(effects
+			(font
+				(size 1.5 1.5)
+				(thickness 0.15)
+			)
+		)
+	)
+	(fp_text user "+"
+		(at 9 0 0)
+		(layer "F.SilkS")
+		(uuid "d6ab678c-47f7-47e0-869b-ef3b9dbd1ba9")
+		(effects
+			(font
+				(size 1.5 1.5)
+				(thickness 0.15)
+			)
+		)
+	)
+	(fp_text user "${REFERENCE}"
+		(at 2.5 0 0)
+		(layer "F.Fab")
+		(uuid "a70efd12-1491-4664-ae98-5b2b7f52a502")
+		(effects
+			(font
+				(size 1 1)
+				(thickness 0.15)
+			)
+		)
+	)
+	(pad "1" thru_hole rect
+		(at 0 0)
+		(size 3 3)
+		(drill 1.8)
+		(layers "*.Cu" "*.Mask")
+		(remove_unused_layers no)
+		(uuid "3a0f3b23-814b-4df9-a02c-3d9fed9e23c9")
+	)
+	(pad "2" thru_hole circle
+		(at 5 0)
+		(size 3 3)
+		(drill 1.8)
+		(layers "*.Cu" "*.Mask")
+		(remove_unused_layers no)
+		(uuid "d897d74a-a13b-47cf-9806-eb8a75fe8d08")
+	)
+	(pad "3" thru_hole circle
+		(at -3.9 -1)
+		(size 1.524 1.524)
+		(drill 1)
+		(layers "*.Cu" "*.Mask")
+		(remove_unused_layers no)
+		(uuid "02a8c3fc-d75c-47a4-a907-f9191ff19e2c")
+	)
+	(pad "4" thru_hole circle
+		(at -3.9 1)
+		(size 1.524 1.524)
+		(drill 1)
+		(layers "*.Cu" "*.Mask")
+		(remove_unused_layers no)
+		(uuid "2000b5b8-f7c9-40a8-9010-65c16d2aefce")
+	)
+	(model "${KICAD8_3DMODEL_DIR}/Connector_AMASS.3dshapes/AMASS_XT30UPB-M_1x02_P5.0mm_Vertical.wrl"
+		(offset
+			(xyz 0 0 0)
+		)
+		(scale
+			(xyz 1 1 1)
+		)
+		(rotate
+			(xyz 0 0 0)
+		)
+	)
+)
--- a/Hardware/open-bms/bms/fp-lib-table
+++ b/Hardware/open-bms/bms/fp-lib-table
@@ -0,0 +1,4 @@
+(fp_lib_table
+	(version 7)
+	(lib (name "amass") (type "KiCad") (uri "${KIPRJMOD}/footprints/amass") (options "") (descr ""))
+)
--- a/Software/MainBoard/rust/.cargo/config.toml
+++ b/Software/MainBoard/rust/.cargo/config.toml
@@ -23,6 +23,8 @@ target = "riscv32imac-unknown-none-elf"
 CHRONO_TZ_TIMEZONE_FILTER = "UTC|America/New_York|America/Chicago|America/Los_Angeles|Europe/London|Europe/Berlin|Europe/Paris|Asia/Tokyo|Asia/Shanghai|Asia/Kolkata|Australia/Sydney|America/Sao_Paulo|Africa/Johannesburg|Asia/Dubai|Pacific/Auckland"
 CARGO_WORKSPACE_DIR = { value = "", relative = true }
 ESP_LOG = "info"
+PATH = { value = "../../../bin:/usr/bin:/usr/local/bin", force = true, relative = true }
+


 [unstable]
--- a/Software/MainBoard/rust/Cargo.toml
+++ b/Software/MainBoard/rust/Cargo.toml
@@ -109,12 +109,13 @@ pca9535 = { version = "2.0.0" }
 ina219 = { version = "0.2.0" }

 # Storage and filesystem
-embedded-savegame = { version = "0.3.0" }
+littlefs2 = { version = "0.6.1", features = ["c-stubs", "alloc"] }
+littlefs2-core = "0.1.2"

 # Serialization / codecs
 serde = { version = "1.0.228", features = ["derive", "alloc"], default-features = false }
 serde_json = { version = "1.0.145", default-features = false, features = ["alloc"] }
-bincode = { version = "2.0.1", default-features = false, features = ["derive", "alloc"] }
+bincode = { version = "2.0.1", default-features = false, features = ["derive"] }

 # Time and time zones
 chrono = { version = "0.4.42", default-features = false, features = ["iana-time-zone", "alloc", "serde"] }
@@ -135,7 +136,6 @@ measurements = "0.11.1"

 # Project-specific
 mcutie = { version = "0.3.0", default-features = false, features = ["log", "homeassistant"] }
-no-panic = "0.1.36"

 [patch.crates-io]
 mcutie = { git = 'https://github.com/empirephoenix/mcutie.git' }
--- a/Software/MainBoard/rust/clippy.toml
+++ b/Software/MainBoard/rust/clippy.toml
@@ -1,2 +0,0 @@
-# This file is used for clippy configuration. 
-# It shouldn't contain the deny attributes, which belong to the crate root.
--- a/Software/MainBoard/rust/src/config.rs
+++ b/Software/MainBoard/rust/src/config.rs
@@ -1,17 +1,17 @@
 use crate::hal::PLANT_COUNT;
 use crate::plant_state::PlantWateringMode;
-use alloc::string::{String, ToString};
-use bincode::{Decode, Encode};
+use alloc::string::String;
+use core::str::FromStr;
 use serde::{Deserialize, Serialize};

-#[derive(Serialize, Deserialize, Clone, Debug, PartialEq, Encode, Decode)]
+#[derive(Serialize, Deserialize, Clone, Debug, PartialEq)]
 #[serde(default)]
 pub struct NetworkConfig {
-    pub ap_ssid: String,
-    pub ssid: Option<String>,
-    pub password: Option<String>,
+    pub ap_ssid: heapless::String<32>,
+    pub ssid: Option<heapless::String<32>>,
+    pub password: Option<heapless::String<64>>,
    pub mqtt_url: Option<String>,
-    pub base_topic: Option<String>,
+    pub base_topic: Option<heapless::String<64>>,
    pub mqtt_user: Option<String>,
    pub mqtt_password: Option<String>,
    pub max_wait: u32,
@@ -19,7 +19,7 @@ pub struct NetworkConfig {
 impl Default for NetworkConfig {
    fn default() -> Self {
        Self {
-            ap_ssid: "PlantCtrl Init".to_string(),
+            ap_ssid: heapless::String::from_str("PlantCtrl Init").unwrap(),
            ssid: None,
            password: None,
            mqtt_url: None,
@@ -31,7 +31,7 @@ impl Default for NetworkConfig {
    }
 }

-#[derive(Serialize, Deserialize, Clone, Debug, PartialEq, Encode, Decode)]
+#[derive(Serialize, Deserialize, Clone, Debug, PartialEq)]
 #[serde(default)]
 pub struct NightLampConfig {
    pub enabled: bool,
@@ -54,7 +54,7 @@ impl Default for NightLampConfig {
    }
 }

-#[derive(Serialize, Deserialize, Clone, Debug, PartialEq, Encode, Decode)]
+#[derive(Serialize, Deserialize, Clone, Debug, PartialEq)]
 #[serde(default)]
 pub struct TankConfig {
    pub tank_sensor_enabled: bool,
@@ -79,26 +79,26 @@ impl Default for TankConfig {
    }
 }

-#[derive(Serialize, Deserialize, Clone, Debug, PartialEq, Default, Encode, Decode)]
+#[derive(Serialize, Deserialize, Clone, Debug, PartialEq, Default)]
 pub enum BatteryBoardVersion {
    #[default]
    Disabled,
    WchI2cSlave,
 }
-#[derive(Serialize, Deserialize, Clone, Debug, PartialEq, Default, Encode, Decode)]
+#[derive(Serialize, Deserialize, Clone, Debug, PartialEq, Default)]
 pub enum BoardVersion {
    Initial,
    #[default]
    V4,
 }

-#[derive(Serialize, Deserialize, Clone, Debug, PartialEq, Default, Encode, Decode)]
+#[derive(Serialize, Deserialize, Clone, Debug, PartialEq, Default)]
 pub struct BoardHardware {
    pub board: BoardVersion,
    pub battery: BatteryBoardVersion,
 }

-#[derive(Serialize, Deserialize, Clone, Debug, PartialEq, Default, Encode, Decode)]
+#[derive(Serialize, Deserialize, Clone, Debug, PartialEq, Default)]
 #[serde(default)]
 pub struct PlantControllerConfig {
    pub hardware: BoardHardware,
@@ -109,7 +109,7 @@ pub struct PlantControllerConfig {
    pub timezone: Option<String>,
 }

-#[derive(Serialize, Deserialize, Clone, Debug, PartialEq, Encode, Decode)]
+#[derive(Serialize, Deserialize, Clone, Debug, PartialEq)]
 #[serde(default)]
 pub struct PlantConfig {
    pub mode: PlantWateringMode,
--- a/Software/MainBoard/rust/src/fat_error.rs
+++ b/Software/MainBoard/rust/src/fat_error.rs
@@ -1,7 +1,5 @@
 use alloc::format;
 use alloc::string::{String, ToString};
-use chrono::format::ParseErrorKind;
-use chrono_tz::ParseError;
 use core::convert::Infallible;
 use core::fmt;
 use core::fmt::Debug;
@@ -16,18 +14,28 @@ use esp_hal::twai::EspTwaiError;
 use esp_radio::wifi::WifiError;
 use ina219::errors::{BusVoltageReadError, ShuntVoltageReadError};
 use lib_bms_protocol::BmsProtocolError;
+use littlefs2_core::PathError;
 use onewire::Error;
 use pca9535::ExpanderError;

 //All error superconstruct
 #[derive(Debug)]
 pub enum FatError {
+    BMSError {
+        error: String,
+    },
    OneWireError {
        error: Error<Infallible>,
    },
    String {
        error: String,
    },
+    LittleFSError {
+        error: littlefs2_core::Error,
+    },
+    PathError {
+        error: PathError,
+    },
    TryLockError {
        error: TryLockError,
    },
@@ -78,6 +86,8 @@ impl fmt::Display for FatError {
            }
            FatError::OneWireError { error } => write!(f, "OneWireError {error:?}"),
            FatError::String { error } => write!(f, "{error}"),
+            FatError::LittleFSError { error } => write!(f, "LittleFSError {error:?}"),
+            FatError::PathError { error } => write!(f, "PathError {error:?}"),
            FatError::TryLockError { error } => write!(f, "TryLockError {error:?}"),
            FatError::WifiError { error } => write!(f, "WifiError {error:?}"),
            FatError::SerdeError { error } => write!(f, "SerdeError {error:?}"),
@@ -96,6 +106,7 @@ impl fmt::Display for FatError {
                write!(f, "CanBusError {error:?}")
            }
            FatError::SNTPError { error } => write!(f, "SNTPError {error:?}"),
+            FatError::BMSError { error } => write!(f, "BMSError, {error}"),
            FatError::OTAError => {
                write!(f, "OTA missing partition")
            }
@@ -138,28 +149,23 @@ impl<T> ContextExt<T> for Option<T> {
    }
 }

-impl<T, E> ContextExt<T> for Result<T, E>
-where
-    E: fmt::Debug,
-{
-    fn context<C>(self, context: C) -> Result<T, FatError>
-    where
-        C: AsRef<str>,
-    {
-        match self {
-            Ok(value) => Ok(value),
-            Err(err) => Err(FatError::String {
-                error: format!("{}: {:?}", context.as_ref(), err),
-            }),
-        }
-    }
-}
-
 impl From<Error<Infallible>> for FatError {
    fn from(error: Error<Infallible>) -> Self {
        FatError::OneWireError { error }
    }
 }
+impl From<littlefs2_core::Error> for FatError {
+    fn from(value: littlefs2_core::Error) -> Self {
+        FatError::LittleFSError { error: value }
+    }
+}
+
+impl From<PathError> for FatError {
+    fn from(value: PathError) -> Self {
+        FatError::PathError { error: value }
+    }
+}
+
 impl From<TryLockError> for FatError {
    fn from(value: TryLockError) -> Self {
        FatError::TryLockError { error: value }
@@ -277,7 +283,7 @@ impl<E: fmt::Debug> From<ShuntVoltageReadError<I2cDeviceError<E>>> for FatError

 impl From<Infallible> for FatError {
    fn from(value: Infallible) -> Self {
-        match value {}
+        panic!("Infallible error: {:?}", value)
    }
 }

@@ -330,27 +336,3 @@ impl From<BmsProtocolError> for FatError {
        }
    }
 }
-
-impl From<ParseError> for FatError {
-    fn from(value: ParseError) -> Self {
-        FatError::String {
-            error: format!("Parsing error: {value:?}"),
-        }
-    }
-}
-
-impl From<ParseErrorKind> for FatError {
-    fn from(value: ParseErrorKind) -> Self {
-        FatError::String {
-            error: format!("Parsing error: {value:?}"),
-        }
-    }
-}
-
-impl From<chrono::format::ParseError> for FatError {
-    fn from(value: chrono::format::ParseError) -> Self {
-        FatError::String {
-            error: format!("Parsing error: {value:?}"),
-        }
-    }
-}
--- a/Software/MainBoard/rust/src/hal/esp.rs
+++ b/Software/MainBoard/rust/src/hal/esp.rs
@@ -1,16 +1,18 @@
 use crate::bail;
 use crate::config::{NetworkConfig, PlantControllerConfig};
-use crate::hal::savegame_manager::SavegameManager;
 use crate::hal::{PLANT_COUNT, TIME_ACCESS};
 use crate::log::{LogMessage, LOG_ACCESS};
 use chrono::{DateTime, Utc};
+use serde::Serialize;

 use crate::fat_error::{ContextExt, FatError, FatResult};
+use crate::hal::little_fs2storage_adapter::LittleFs2Filesystem;
 use crate::hal::shared_flash::MutexFlashStorage;
 use alloc::string::ToString;
 use alloc::sync::Arc;
 use alloc::{format, string::String, vec, vec::Vec};
 use core::net::{IpAddr, Ipv4Addr, SocketAddr};
+use core::str::FromStr;
 use core::sync::atomic::Ordering;
 use embassy_executor::Spawner;
 use embassy_net::udp::UdpSocket;
@@ -37,6 +39,8 @@ use esp_radio::wifi::{
    AccessPointConfig, AccessPointInfo, AuthMethod, ClientConfig, ModeConfig, ScanConfig,
    ScanTypeConfig, WifiController, WifiDevice, WifiStaState,
 };
+use littlefs2::fs::Filesystem;
+use littlefs2_core::{FileType, PathBuf, SeekFrom};
 use log::{error, info, warn};
 use mcutie::{
    Error, McutieBuilder, McutieReceiver, McutieTask, MqttMessage, PublishDisplay, Publishable,
@@ -56,6 +60,7 @@ static mut LOW_VOLTAGE_DETECTED: i8 = 0;
 #[esp_hal::ram(unstable(rtc_fast), unstable(persistent))]
 static mut RESTART_TO_CONF: i8 = 0;

+const CONFIG_FILE: &str = "config.json";
 const NTP_SERVER: &str = "pool.ntp.org";

 static MQTT_CONNECTED_EVENT_RECEIVED: AtomicBool = AtomicBool::new(false);
@@ -63,6 +68,19 @@ static MQTT_ROUND_TRIP_RECEIVED: AtomicBool = AtomicBool::new(false);
 pub static MQTT_STAY_ALIVE: AtomicBool = AtomicBool::new(false);
 static MQTT_BASE_TOPIC: OnceLock<String> = OnceLock::new();

+#[derive(Serialize, Debug)]
+pub struct FileInfo {
+    filename: String,
+    size: usize,
+}
+
+#[derive(Serialize, Debug)]
+pub struct FileList {
+    total: usize,
+    used: usize,
+    files: Vec<FileInfo>,
+}
+
 #[derive(Copy, Clone, Default)]
 struct Timestamp {
    stamp: DateTime<Utc>,
@@ -99,7 +117,7 @@ impl NtpTimestampGenerator for Timestamp {
 }

 pub struct Esp<'a> {
-    pub savegame: SavegameManager,
+    pub fs: Arc<Mutex<CriticalSectionRawMutex, Filesystem<'static, LittleFs2Filesystem>>>,
    pub rng: Rng,
    //first starter (ap or sta will take these)
    pub interface_sta: Option<WifiDevice<'static>>,
@@ -167,6 +185,69 @@ impl Esp<'_> {
            }
        }
    }
+    pub(crate) async fn delete_file(&self, filename: String) -> FatResult<()> {
+        let file = PathBuf::try_from(filename.as_str())?;
+        let access = self.fs.lock().await;
+        access.remove(&file)?;
+        Ok(())
+    }
+    pub(crate) async fn write_file(
+        &mut self,
+        filename: String,
+        offset: u32,
+        buf: &[u8],
+    ) -> Result<(), FatError> {
+        let file = PathBuf::try_from(filename.as_str())?;
+        let access = self.fs.lock().await;
+        access.open_file_with_options_and_then(
+            |options| options.read(true).write(true).create(true),
+            &file,
+            |file| {
+                file.seek(SeekFrom::Start(offset))?;
+                file.write(buf)?;
+                Ok(())
+            },
+        )?;
+        Ok(())
+    }
+
+    pub async fn get_size(&mut self, filename: String) -> FatResult<usize> {
+        let file = PathBuf::try_from(filename.as_str())?;
+        let access = self.fs.lock().await;
+        let data = access.metadata(&file)?;
+        Ok(data.len())
+    }
+    pub(crate) async fn get_file(
+        &mut self,
+        filename: String,
+        chunk: u32,
+    ) -> FatResult<([u8; 512], usize)> {
+        use littlefs2::io::Error as lfs2Error;
+
+        let file = PathBuf::try_from(filename.as_str())?;
+        let access = self.fs.lock().await;
+        let mut buf = [0_u8; 512];
+        let mut read = 0;
+        let offset = chunk * buf.len() as u32;
+        access.open_file_with_options_and_then(
+            |options| options.read(true),
+            &file,
+            |file| {
+                let length = file.len()? as u32;
+                if length == 0 {
+                    Err(lfs2Error::IO)
+                } else if length > offset {
+                    file.seek(SeekFrom::Start(offset))?;
+                    read = file.read(&mut buf)?;
+                    Ok(())
+                } else {
+                    //exactly at end, do nothing
+                    Ok(())
+                }
+            },
+        )?;
+        Ok((buf, read))
+    }

    pub(crate) async fn write_ota(&mut self, offset: u32, buf: &[u8]) -> Result<(), FatError> {
        let _ = check_erase(self.ota_target, offset, offset + 4096);
@@ -233,19 +314,17 @@ impl Esp<'_> {
            &mut tx_meta,
            &mut tx_buffer,
        );
-        socket.bind(123).context("Could not bind UDP socket")?;
+        socket.bind(123).unwrap();

        let context = NtpContext::new(Timestamp::default());

        let ntp_addrs = stack
            .dns_query(NTP_SERVER, DnsQueryType::A)
-            .await
-            .context("Failed to resolve DNS")?;
-
-        if ntp_addrs.is_empty() {
-            bail!("No IP addresses found for NTP server");
+            .await;
+        if ntp_addrs.is_err() {
+            bail!("Failed to resolve DNS");
        }
-        let ntp = ntp_addrs[0];
+        let ntp = ntp_addrs.unwrap()[0];
        info!("NTP server: {ntp:?}");

        let mut counter = 0;
@@ -337,11 +416,9 @@ impl Esp<'_> {
            Err(_) => "PlantCtrl Emergency Mode".to_string(),
        };

-        let device = self
-            .interface_ap
-            .take()
-            .context("AP interface already taken")?;
-        let gw_ip_addr = Ipv4Addr::new(192, 168, 71, 1);
+        let device = self.interface_ap.take().unwrap();
+        let gw_ip_addr_str = "192.168.71.1";
+        let gw_ip_addr = Ipv4Addr::from_str(gw_ip_addr_str).expect("failed to parse gateway ip");

        let config = embassy_net::Config::ipv4_static(StaticConfigV4 {
            address: Ipv4Cidr::new(gw_ip_addr, 24),
@@ -370,7 +447,7 @@ impl Esp<'_> {
        println!("start net task");
        spawner.spawn(net_task(runner)).ok();
        println!("run dhcp");
-        spawner.spawn(run_dhcp(*stack, gw_ip_addr)).ok();
+        spawner.spawn(run_dhcp(*stack, gw_ip_addr_str)).ok();

        loop {
            if stack.is_link_up() {
@@ -381,7 +458,7 @@ impl Esp<'_> {
        while !stack.is_config_up() {
            Timer::after(Duration::from_millis(100)).await
        }
-        println!("Connect to the AP `${ssid}` and point your browser to http://{gw_ip_addr}/");
+        println!("Connect to the AP `${ssid}` and point your browser to http://{gw_ip_addr_str}/");
        stack
            .config_v4()
            .inspect(|c| println!("ipv4 config: {c:?}"));
@@ -395,17 +472,18 @@ impl Esp<'_> {
        spawner: Spawner,
    ) -> FatResult<Stack<'static>> {
        esp_radio::wifi_set_log_verbose();
-        let ssid = match &network_config.ssid {
+        let ssid = network_config.ssid.clone();
+        match &ssid {
            Some(ssid) => {
                if ssid.is_empty() {
                    bail!("Wifi ssid was empty")
                }
-                ssid.to_string()
            }
            None => {
                bail!("Wifi ssid was empty")
            }
-        };
+        }
+        let ssid = ssid.unwrap().to_string();
        info!("attempting to connect wifi {ssid}");
        let password = match network_config.password {
            Some(ref password) => password.to_string(),
@@ -413,10 +491,7 @@ impl Esp<'_> {
        };
        let max_wait = network_config.max_wait;

-        let device = self
-            .interface_sta
-            .take()
-            .context("STA interface already taken")?;
+        let device = self.interface_sta.take().unwrap();
        let config = embassy_net::Config::dhcpv4(DhcpConfig::default());

        let seed = (self.rng.random() as u64) << 32 | self.rng.random() as u64;
@@ -521,9 +596,9 @@ impl Esp<'_> {
        if let Ok(cur) = self.ota.current_ota_state() {
            if cur == OtaImageState::PendingVerify {
                info!("Marking OTA image as valid");
-                if let Err(err) = self.ota.set_current_ota_state(Valid) {
-                    error!("Could not set image to valid: {:?}", err);
-                }
+                self.ota
+                    .set_current_ota_state(Valid)
+                    .expect("Could not set image to valid");
            }
        } else {
            info!("No OTA image to mark as valid");
@@ -540,46 +615,48 @@ impl Esp<'_> {
        }
    }

-    /// Load the most recently saved config from flash.
    pub(crate) async fn load_config(&mut self) -> FatResult<PlantControllerConfig> {
-        match self.savegame.load_latest()? {
-            None => bail!("No config stored"),
-            Some(data) => {
-                let config: PlantControllerConfig = serde_json::from_slice(&data)?;
-                Ok(config)
-            }
+        let cfg = PathBuf::try_from(CONFIG_FILE)?;
+        let config_exist = self.fs.lock().await.exists(&cfg);
+        if !config_exist {
+            bail!("No config file stored")
        }
+        let data = self.fs.lock().await.read::<4096>(&cfg)?;
+        let config: PlantControllerConfig = serde_json::from_slice(&data)?;
+        Ok(config)
    }
-
-    /// Load a config from a specific save slot.
-    pub(crate) async fn load_config_slot(
-        &mut self,
-        idx: usize,
-    ) -> FatResult<String> {
-        match self.savegame.load_slot(idx)? {
-            None => bail!("Slot {idx} is empty or invalid"),
-            Some(data) => {
-                Ok(String::from_utf8_lossy(&*data).to_string())
-            }
-        }
-    }
-
-    /// Persist a JSON config blob to the next wear-leveling slot.
-    pub(crate) async fn save_config(&mut self, mut config: Vec<u8>) -> FatResult<()> {
-        self.savegame.save(config.as_mut_slice())?;
+    pub(crate) async fn save_config(&mut self, config: Vec<u8>) -> FatResult<()> {
+        let filesystem = self.fs.lock().await;
+        let cfg = PathBuf::try_from(CONFIG_FILE)?;
+        filesystem.write(&cfg, &config)?;
        Ok(())
    }
+    pub(crate) async fn list_files(&self) -> FatResult<FileList> {
+        let path = PathBuf::new();

-    /// Delete a specific save slot by erasing it on flash.
-    pub(crate) async fn delete_save_slot(&mut self, idx: usize) -> FatResult<()> {
-        self.savegame.delete_slot(idx)
-    }
+        let fs = self.fs.lock().await;
+        let free_size = fs.available_space()?;
+        let total_size = fs.total_space();

-    /// Return metadata about all valid save slots.
-    pub(crate) async fn list_saves(
-        &mut self,
-    ) -> FatResult<alloc::vec::Vec<crate::hal::savegame_manager::SaveInfo>> {
-        self.savegame.list_saves()
+        let mut result = FileList {
+            total: total_size,
+            used: total_size - free_size,
+            files: Vec::new(),
+        };
+
+        fs.read_dir_and_then(&path, |dir| {
+            for entry in dir {
+                let e = entry?;
+                if e.file_type() == FileType::File {
+                    result.files.push(FileInfo {
+                        filename: e.path().to_string(),
+                        size: e.metadata().len(),
+                    });
+                }
+            }
+            Ok(())
+        })?;
+        Ok(result)
    }

    pub(crate) async fn init_rtc_deepsleep_memory(
@@ -672,11 +749,11 @@ impl Esp<'_> {

        let mut builder: McutieBuilder<'_, String, PublishDisplay<String, &str>, 0> =
            McutieBuilder::new(stack, "plant ctrl", mqtt_url);
-        if let (Some(mqtt_user), Some(mqtt_password)) = (
-            network_config.mqtt_user.as_ref(),
-            network_config.mqtt_password.as_ref(),
-        ) {
-            builder = builder.with_authentication(mqtt_user, mqtt_password);
+        if network_config.mqtt_user.is_some() && network_config.mqtt_password.is_some() {
+            builder = builder.with_authentication(
+                network_config.mqtt_user.as_ref().unwrap().as_str(),
+                network_config.mqtt_password.as_ref().unwrap().as_str(),
+            );
            info!("With authentification");
        }

@@ -728,10 +805,11 @@ impl Esp<'_> {
            Timer::after(Duration::from_millis(100)).await;
        }

-        let _ = Topic::General(round_trip_topic.clone())
+        Topic::General(round_trip_topic.clone())
            .with_display("online_text")
            .publish()
-            .await;
+            .await
+            .unwrap();

        let timeout = {
            let guard = TIME_ACCESS.get().await.lock().await;
@@ -883,8 +961,8 @@ async fn net_task(mut runner: Runner<'static, WifiDevice<'static>>) {
 }

 #[embassy_executor::task]
-async fn run_dhcp(stack: Stack<'static>, ip: Ipv4Addr) {
-    use core::net::SocketAddrV4;
+async fn run_dhcp(stack: Stack<'static>, gw_ip_addr: &'static str) {
+    use core::net::{Ipv4Addr, SocketAddrV4};

    use edge_dhcp::{
        io::{self, DEFAULT_SERVER_PORT},
@@ -893,25 +971,21 @@ async fn run_dhcp(stack: Stack<'static>, ip: Ipv4Addr) {
    use edge_nal::UdpBind;
    use edge_nal_embassy::{Udp, UdpBuffers};

+    let ip = Ipv4Addr::from_str(gw_ip_addr).expect("dhcp task failed to parse gw ip");
+
    let mut buf = [0u8; 1500];

    let mut gw_buf = [Ipv4Addr::UNSPECIFIED];

    let buffers = UdpBuffers::<3, 1024, 1024, 10>::new();
    let unbound_socket = Udp::new(stack, &buffers);
-    let mut bound_socket = match unbound_socket
+    let mut bound_socket = unbound_socket
        .bind(SocketAddr::V4(SocketAddrV4::new(
            Ipv4Addr::UNSPECIFIED,
            DEFAULT_SERVER_PORT,
        )))
        .await
-    {
-        Ok(s) => s,
-        Err(e) => {
-            error!("dhcp task failed to bind socket: {:?}", e);
-            return;
-        }
-    };
+        .unwrap();

    loop {
        _ = io::server::run(
--- a/Software/MainBoard/rust/src/hal/little_fs2storage_adapter.rs
+++ b/Software/MainBoard/rust/src/hal/little_fs2storage_adapter.rs
@@ -0,0 +1,88 @@
+use crate::hal::shared_flash::MutexFlashStorage;
+use embedded_storage::nor_flash::{check_erase, NorFlash, ReadNorFlash};
+use esp_bootloader_esp_idf::partitions::FlashRegion;
+use littlefs2::consts::U4096 as lfsCache;
+use littlefs2::consts::U512 as lfsLookahead;
+use littlefs2::driver::Storage as lfs2Storage;
+use littlefs2::io::Error as lfs2Error;
+use littlefs2::io::Result as lfs2Result;
+use log::error;
+
+pub struct LittleFs2Filesystem {
+    pub(crate) storage: &'static mut FlashRegion<'static, MutexFlashStorage>,
+}
+
+impl lfs2Storage for LittleFs2Filesystem {
+    const READ_SIZE: usize = 4096;
+    const WRITE_SIZE: usize = 4096;
+    const BLOCK_SIZE: usize = 4096; //usually optimal for flash access
+    const BLOCK_COUNT: usize = 8 * 1000 * 1000 / 4096; //8Mb in 4k blocks + a little space for stupid calculation errors
+    const BLOCK_CYCLES: isize = 100;
+    type CACHE_SIZE = lfsCache;
+    type LOOKAHEAD_SIZE = lfsLookahead;
+
+    fn read(&mut self, off: usize, buf: &mut [u8]) -> lfs2Result<usize> {
+        let read_size: usize = Self::READ_SIZE;
+        if off % read_size != 0 {
+            error!("Littlefs2Filesystem read error: offset not aligned to read size offset: {off} read_size: {read_size}");
+            return Err(lfs2Error::IO);
+        }
+        if buf.len() % read_size != 0 {
+            error!("Littlefs2Filesystem read error: length not aligned to read size length: {} read_size: {}", buf.len(), read_size);
+            return Err(lfs2Error::IO);
+        }
+        match self.storage.read(off as u32, buf) {
+            Ok(..) => Ok(buf.len()),
+            Err(err) => {
+                error!("Littlefs2Filesystem read error: {err:?}");
+                Err(lfs2Error::IO)
+            }
+        }
+    }
+
+    fn write(&mut self, off: usize, data: &[u8]) -> lfs2Result<usize> {
+        let write_size: usize = Self::WRITE_SIZE;
+        if off % write_size != 0 {
+            error!("Littlefs2Filesystem write error: offset not aligned to write size offset: {off} write_size: {write_size}");
+            return Err(lfs2Error::IO);
+        }
+        if data.len() % write_size != 0 {
+            error!("Littlefs2Filesystem write error: length not aligned to write size length: {} write_size: {}", data.len(), write_size);
+            return Err(lfs2Error::IO);
+        }
+        match self.storage.write(off as u32, data) {
+            Ok(..) => Ok(data.len()),
+            Err(err) => {
+                error!("Littlefs2Filesystem write error: {err:?}");
+                Err(lfs2Error::IO)
+            }
+        }
+    }
+
+    fn erase(&mut self, off: usize, len: usize) -> lfs2Result<usize> {
+        let block_size: usize = Self::BLOCK_SIZE;
+        if off % block_size != 0 {
+            error!("Littlefs2Filesystem erase error: offset not aligned to block size offset: {off} block_size: {block_size}");
+            return Err(lfs2Error::IO);
+        }
+        if len % block_size != 0 {
+            error!("Littlefs2Filesystem erase error: length not aligned to block size length: {len} block_size: {block_size}");
+            return Err(lfs2Error::IO);
+        }
+
+        match check_erase(self.storage, off as u32, (off + len) as u32) {
+            Ok(_) => {}
+            Err(err) => {
+                error!("Littlefs2Filesystem check erase error: {err:?}");
+                return Err(lfs2Error::IO);
+            }
+        }
+        match self.storage.erase(off as u32, (off + len) as u32) {
+            Ok(..) => Ok(len),
+            Err(err) => {
+                error!("Littlefs2Filesystem erase error: {err:?}");
+                Err(lfs2Error::IO)
+            }
+        }
+    }
+}
--- a/Software/MainBoard/rust/src/hal/mod.rs
+++ b/Software/MainBoard/rust/src/hal/mod.rs
@@ -3,14 +3,14 @@ use lib_bms_protocol::BmsReadable;
 pub(crate) mod battery;
 // mod can_api; // replaced by external canapi crate
 pub mod esp;
-pub(crate) mod savegame_manager;
+mod little_fs2storage_adapter;
 pub(crate) mod rtc;
 mod shared_flash;
 mod v4_hal;
 mod water;

 use crate::alloc::string::ToString;
-use crate::hal::rtc::{BackupHeader, DS3231Module, RTCModuleInteraction};
+use crate::hal::rtc::{DS3231Module, RTCModuleInteraction};
 use esp_hal::peripherals::Peripherals;
 use esp_hal::peripherals::ADC1;
 use esp_hal::peripherals::GPIO0;
@@ -75,7 +75,7 @@ use measurements::{Current, Voltage};

 use crate::fat_error::{ContextExt, FatError, FatResult};
 use crate::hal::battery::WCHI2CSlave;
-use crate::hal::savegame_manager::SavegameManager;
+use crate::hal::little_fs2storage_adapter::LittleFs2Filesystem;
 use crate::hal::water::TankSensor;
 use crate::log::LOG_ACCESS;
 use embassy_sync::mutex::Mutex;
@@ -99,7 +99,9 @@ use esp_hal::uart::Uart;
 use esp_hal::Blocking;
 use esp_radio::{init, Controller};
 use esp_storage::FlashStorage;
-use log::{info, warn};
+use littlefs2::fs::{Allocation, Filesystem as lfs2Filesystem};
+use littlefs2::object_safe::DynStorage;
+use log::{error, info, warn};
 use portable_atomic::AtomicBool;
 use serde::{Deserialize, Serialize};
 use shared_flash::MutexFlashStorage;
@@ -162,10 +164,6 @@ pub trait BoardInteraction<'a> {
    async fn get_mptt_current(&mut self) -> FatResult<Current>;
    async fn can_power(&mut self, state: bool) -> FatResult<()>;

-    async fn backup_config(&mut self, config: &PlantControllerConfig) -> FatResult<()>;
-    async fn read_backup(&mut self) -> FatResult<PlantControllerConfig>;
-    async fn backup_info(&mut self) -> FatResult<BackupHeader>;
-
    // Return JSON string with autodetected sensors per plant. Default: not supported.
    async fn detect_sensors(&mut self, _request: Detection) -> FatResult<Detection> {
        bail!("Autodetection is only available on v4 HAL with CAN bus");
@@ -268,17 +266,12 @@ impl PlantHal {
        let rng = Rng::new();
        let esp_wifi_ctrl = &*mk_static!(
            Controller<'static>,
-            init().map_err(|e| FatError::String {
-                error: format!("Could not init wifi controller: {:?}", e)
-            })?
+            init().expect("Could not init wifi controller")
        );

        let (controller, interfaces) =
-            esp_radio::wifi::new(esp_wifi_ctrl, peripherals.WIFI, Default::default()).map_err(
-                |e| FatError::String {
-                    error: format!("Could not init wifi: {:?}", e),
-                },
-            )?;
+            esp_radio::wifi::new(esp_wifi_ctrl, peripherals.WIFI, Default::default())
+                .expect("Could not init wifi");

        let pcnt_module = Pcnt::new(peripherals.PCNT);

@@ -332,7 +325,7 @@ impl PlantHal {
            pt.find_partition(esp_bootloader_esp_idf::partitions::PartitionType::Data(
                DataPartitionSubType::Ota,
            ))?
-            .context("No OTA data partition found")?
+            .expect("No OTA data partition found")
        );

        let ota_data = mk_static!(
@@ -377,16 +370,32 @@ impl PlantHal {
            .find_partition(esp_bootloader_esp_idf::partitions::PartitionType::Data(
                DataPartitionSubType::LittleFs,
            ))?
-            .context("Storage data partition not found")?;
+            .expect("Data partition with littlefs not found");
        let data_partition = mk_static!(PartitionEntry, data_partition);

        let data = mk_static!(
-            FlashRegion<'static, MutexFlashStorage>,
+            FlashRegion<MutexFlashStorage>,
            data_partition.as_embedded_storage(flash_storage_3)
        );
+        let lfs2filesystem = mk_static!(LittleFs2Filesystem, LittleFs2Filesystem { storage: data });
+        let alloc = mk_static!(Allocation<LittleFs2Filesystem>, lfs2Filesystem::allocate());
+        if lfs2filesystem.is_mountable() {
+            info!("Littlefs2 filesystem is mountable");
+        } else {
+            match lfs2filesystem.format() {
+                Ok(..) => {
+                    info!("Littlefs2 filesystem is formatted");
+                }
+                Err(err) => {
+                    error!("Littlefs2 filesystem could not be formatted: {err:?}");
+                }
+            }
+        }

-        let savegame = SavegameManager::new(data);
-        info!("Savegame storage initialized ({} slots × {} KB)", savegame_manager::SAVEGAME_SLOT_COUNT, savegame_manager::SAVEGAME_SLOT_SIZE / 1024);
+        #[allow(clippy::arc_with_non_send_sync)]
+        let fs = Arc::new(Mutex::new(
+            lfs2Filesystem::mount(alloc, lfs2filesystem).expect("Could not mount lfs2 filesystem"),
+        ));

        let uart0 =
            Uart::new(peripherals.UART0, UartConfig::default()).map_err(|_| FatError::String {
@@ -396,7 +405,7 @@ impl PlantHal {
        let ap = interfaces.ap;
        let sta = interfaces.sta;
        let mut esp = Esp {
-            savegame,
+            fs,
            rng,
            controller: Arc::new(Mutex::new(controller)),
            interface_sta: Some(sta),
@@ -479,9 +488,7 @@ impl PlantHal {
            RefCell<I2c<Blocking>>,
        > = CriticalSectionMutex::new(RefCell::new(i2c));

-        I2C_DRIVER.init(i2c_bus).map_err(|_| FatError::String {
-            error: "Could not init i2c driver".to_string(),
-        })?;
+        I2C_DRIVER.init(i2c_bus).expect("Could not init i2c driver");

        let i2c_bus = I2C_DRIVER.get().await;
        let rtc_device = I2cDevice::new(i2c_bus);
@@ -643,7 +650,7 @@ pub fn next_partition(current: AppPartitionSubType) -> FatResult<AppPartitionSub

 pub async fn esp_time() -> DateTime<Utc> {
    let guard = TIME_ACCESS.get().await.lock().await;
-    DateTime::from_timestamp_micros(guard.current_time_us() as i64).unwrap_or(DateTime::UNIX_EPOCH)
+    DateTime::from_timestamp_micros(guard.current_time_us() as i64).unwrap()
 }

 pub async fn esp_set_time(time: DateTime<FixedOffset>) -> FatResult<()> {
--- a/Software/MainBoard/rust/src/hal/rtc.rs
+++ b/Software/MainBoard/rust/src/hal/rtc.rs
@@ -1,7 +1,8 @@
-use crate::hal::Box;
 use crate::fat_error::FatResult;
+use crate::hal::Box;
 use async_trait::async_trait;
-use bincode::{Decode, Encode};
+use bincode::config::Configuration;
+use bincode::{config, Decode, Encode};
 use chrono::{DateTime, Utc};
 use ds323x::ic::DS3231;
 use ds323x::interface::I2cInterface;
@@ -18,21 +19,24 @@ use esp_hal::Blocking;
 use serde::{Deserialize, Serialize};

 pub const X25: crc::Crc<u16> = crc::Crc::<u16>::new(&crc::CRC_16_IBM_SDLC);
-pub const EEPROM_PAGE: usize = 32;
+const CONFIG: Configuration = config::standard();
 //
 #[async_trait(?Send)]
 pub trait RTCModuleInteraction {
+    async fn get_backup_info(&mut self) -> FatResult<BackupHeader>;
+    async fn get_backup_config(&mut self, chunk: usize) -> FatResult<([u8; 32], usize, u16)>;
+    async fn backup_config(&mut self, offset: usize, bytes: &[u8]) -> FatResult<()>;
+    async fn backup_config_finalize(&mut self, crc: u16, length: usize) -> FatResult<()>;
    async fn get_rtc_time(&mut self) -> FatResult<DateTime<Utc>>;
    async fn set_rtc_time(&mut self, time: &DateTime<Utc>) -> FatResult<()>;
-
-    fn write(&mut self, offset: u32, data: &[u8]) -> FatResult<()>;
-    fn read(&mut self, offset:u32, data: &mut [u8]) -> FatResult<()>;
 }
+//
+const BACKUP_HEADER_MAX_SIZE: usize = 64;

 #[derive(Serialize, Deserialize, PartialEq, Debug, Default, Encode, Decode)]
 pub struct BackupHeader {
    pub timestamp: i64,
-    pub(crate) crc16: u16,
+    crc16: u16,
    pub size: u16,
 }
 //
@@ -42,7 +46,7 @@ pub struct DS3231Module {
        DS3231,
    >,

-    pub storage: eeprom24x::Storage<
+    pub(crate) storage: eeprom24x::Storage<
        I2cDevice<'static, CriticalSectionRawMutex, I2c<'static, Blocking>>,
        B32,
        TwoBytes,
@@ -53,6 +57,67 @@ pub struct DS3231Module {

 #[async_trait(?Send)]
 impl RTCModuleInteraction for DS3231Module {
+    async fn get_backup_info(&mut self) -> FatResult<BackupHeader> {
+        let mut header_page_buffer = [0_u8; BACKUP_HEADER_MAX_SIZE];
+
+        self.storage.read(0, &mut header_page_buffer)?;
+
+        let (header, len): (BackupHeader, usize) =
+            bincode::decode_from_slice(&header_page_buffer[..], CONFIG)?;
+
+        log::info!("Raw header is {header_page_buffer:?} with size {len}");
+        Ok(header)
+    }
+
+    async fn get_backup_config(&mut self, chunk: usize) -> FatResult<([u8; 32], usize, u16)> {
+        let mut header_page_buffer = [0_u8; BACKUP_HEADER_MAX_SIZE];
+
+        self.storage.read(0, &mut header_page_buffer)?;
+        let (header, _header_size): (BackupHeader, usize) =
+            bincode::decode_from_slice(&header_page_buffer[..], CONFIG)?;
+
+        let mut buf = [0_u8; 32];
+        let offset = chunk * buf.len() + BACKUP_HEADER_MAX_SIZE;
+
+        let end: usize = header.size as usize + BACKUP_HEADER_MAX_SIZE;
+        let current_end = offset + buf.len();
+        let chunk_size = if current_end > end {
+            end - offset
+        } else {
+            buf.len()
+        };
+        if chunk_size == 0 {
+            Ok((buf, 0, header.crc16))
+        } else {
+            self.storage.read(offset as u32, &mut buf)?;
+            //&buf[..chunk_size];
+            Ok((buf, chunk_size, header.crc16))
+        }
+    }
+    async fn backup_config(&mut self, offset: usize, bytes: &[u8]) -> FatResult<()> {
+        //skip header and write after
+        self.storage
+            .write((BACKUP_HEADER_MAX_SIZE + offset) as u32, bytes)?;
+
+        Ok(())
+    }
+
+    async fn backup_config_finalize(&mut self, crc: u16, length: usize) -> FatResult<()> {
+        let mut header_page_buffer = [0_u8; BACKUP_HEADER_MAX_SIZE];
+
+        let time = self.get_rtc_time().await?.timestamp_millis();
+        let header = BackupHeader {
+            crc16: crc,
+            timestamp: time,
+            size: length as u16,
+        };
+        let config = config::standard();
+        let encoded = bincode::encode_into_slice(&header, &mut header_page_buffer, config)?;
+        log::info!("Raw header is {header_page_buffer:?} with size {encoded}");
+        self.storage.write(0, &header_page_buffer)?;
+        Ok(())
+    }
+
    async fn get_rtc_time(&mut self) -> FatResult<DateTime<Utc>> {
        Ok(self.rtc.datetime()?.and_utc())
    }
@@ -61,14 +126,4 @@ impl RTCModuleInteraction for DS3231Module {
        let naive_time = time.naive_utc();
        Ok(self.rtc.set_datetime(&naive_time)?)
    }
-
-    fn write(&mut self, offset: u32, data: &[u8]) -> FatResult<()> {
-        self.storage.write(offset, data)?;
-        Ok(())
-    }
-
-    fn read(&mut self, offset:u32, data: &mut [u8]) -> FatResult<()> {
-        self.storage.read(offset, data)?;
-        Ok(())
-    }
 }
--- a/Software/MainBoard/rust/src/hal/savegame_manager.rs
+++ b/Software/MainBoard/rust/src/hal/savegame_manager.rs
@@ -1,150 +0,0 @@
-use alloc::vec::Vec;
-use embedded_savegame::storage::{Flash, Storage};
-use embedded_storage::nor_flash::{NorFlash, ReadNorFlash};
-use esp_bootloader_esp_idf::partitions::{FlashRegion, Error as PartitionError};
-use serde::Serialize;
-
-use crate::fat_error::{FatError, FatResult};
-use crate::hal::shared_flash::MutexFlashStorage;
-
-/// Size of each save slot in bytes (16 KB).
-pub const SAVEGAME_SLOT_SIZE: usize = 16384;
-
-/// Number of slots in the 8 MB storage partition.
-pub const SAVEGAME_SLOT_COUNT: usize = 8 * 1024 * 1024 / SAVEGAME_SLOT_SIZE; // 512
-
-/// Metadata about a single existing save slot, returned by [`SavegameManager::list_saves`].
-#[derive(Serialize, Debug, Clone)]
-pub struct SaveInfo {
-    pub idx: usize,
-    pub len: u32,
-}
-
-// ── Flash adapter ──────────────────────────────────────────────────────────────
-
-/// Newtype wrapper around a [`PartitionError`] so we can implement the
-/// [`core::fmt::Debug`] bound required by [`embedded_savegame::storage::Flash`].
-#[derive(Debug)]
-pub struct SavegameFlashError(#[allow(dead_code)] PartitionError);
-
-/// Adapts a `&mut FlashRegion<'static, MutexFlashStorage>` to the
-/// [`embedded_savegame::storage::Flash`] trait.
-///
-/// `erase(addr)` erases exactly one slot (`SAVEGAME_SLOT_SIZE` bytes) starting
-/// at `addr`, which is what embedded-savegame expects for NOR flash.
-pub struct SavegameFlashAdapter<'a> {
-    region: &'a mut FlashRegion<'static, MutexFlashStorage>,
-}
-
-impl Flash for SavegameFlashAdapter<'_> {
-    type Error = SavegameFlashError;
-
-    fn read(&mut self, addr: u32, buf: &mut [u8]) -> Result<(), Self::Error> {
-        ReadNorFlash::read(self.region, addr, buf).map_err(SavegameFlashError)
-    }
-
-    fn write(&mut self, addr: u32, data: &mut [u8]) -> Result<(), Self::Error> {
-        NorFlash::write(self.region, addr, data).map_err(SavegameFlashError)
-    }
-
-    /// Erase one full slot at `addr`.
-    /// embedded-savegame calls this before writing to a slot, so we erase
-    /// the entire `SAVEGAME_SLOT_SIZE` bytes so subsequent writes land on
-    /// pre-erased (0xFF) pages.
-    fn erase(&mut self, addr: u32) -> Result<(), Self::Error> {
-        let end = addr + SAVEGAME_SLOT_SIZE as u32;
-        NorFlash::erase(self.region, addr, end).map_err(SavegameFlashError)
-    }
-}
-
-impl From<SavegameFlashError> for FatError {
-    fn from(e: SavegameFlashError) -> Self {
-        FatError::String {
-            error: alloc::format!("Savegame flash error: {:?}", e),
-        }
-    }
-}
-
-// ── SavegameManager ────────────────────────────────────────────────────────────
-
-/// High-level save-game manager that stores JSON config blobs on the storage
-/// partition using [`embedded_savegame`] for wear leveling and power-fail safety.
-pub struct SavegameManager {
-    region: &'static mut FlashRegion<'static, MutexFlashStorage>,
-}
-
-impl SavegameManager {
-    pub fn new(region: &'static mut FlashRegion<'static, MutexFlashStorage>) -> Self {
-        Self { region }
-    }
-
-    /// Build a short-lived [`Storage`] that borrows our flash region.
-    fn storage(
-        &mut self,
-    ) -> Storage<SavegameFlashAdapter<'_>, SAVEGAME_SLOT_SIZE, SAVEGAME_SLOT_COUNT> {
-        Storage::new(SavegameFlashAdapter {
-            region: &mut *self.region,
-        })
-    }
-
-    /// Persist `data` (JSON bytes) to the next available slot.
-    ///
-    /// `scan()` advances the internal wear-leveling pointer to the latest valid
-    /// slot before `append()` writes to the next free one.
-    pub fn save(&mut self, data: &mut [u8]) -> FatResult<()> {
-        let mut st = self.storage();
-        st.scan()?;
-        st.append(data)?;
-        Ok(())
-    }
-
-    /// Load the most recently saved data.  Returns `None` if no valid save exists.
-    pub fn load_latest(&mut self) -> FatResult<Option<Vec<u8>>> {
-        let mut st = self.storage();
-        let slot = st.scan()?;
-        match slot {
-            None => Ok(None),
-            Some(slot) => {
-                let mut buf = alloc::vec![0u8; SAVEGAME_SLOT_SIZE];
-                match st.read(slot.idx, &mut buf)? {
-                    None => Ok(None),
-                    Some(data) => Ok(Some(data.to_vec())),
-                }
-            }
-        }
-    }
-
-    /// Load a specific save by slot index.  Returns `None` if the slot is
-    /// empty or contains an invalid checksum.
-    pub fn load_slot(&mut self, idx: usize) -> FatResult<Option<Vec<u8>>> {
-        let mut st = self.storage();
-        let mut buf = alloc::vec![0u8; SAVEGAME_SLOT_SIZE];
-        match st.read(idx, &mut buf)? {
-            None => Ok(None),
-            Some(data) => Ok(Some(data.to_vec())),
-        }
-    }
-
-    /// Erase a specific slot by index, effectively deleting it.
-    pub fn delete_slot(&mut self, idx: usize) -> FatResult<()> {
-        let mut st = self.storage();
-        st.erase(idx).map_err(Into::into)
-    }
-
-    /// Iterate all slots and return metadata for every slot that contains a
-    /// valid save, using the Storage read API to avoid assuming internal slot structure.
-    pub fn list_saves(&mut self) -> FatResult<Vec<SaveInfo>> {
-        let mut saves = Vec::new();
-        let mut st = self.storage();
-        let mut buf = alloc::vec![0u8; SAVEGAME_SLOT_SIZE];
-        for idx in 0..SAVEGAME_SLOT_COUNT {
-            if let Some(data) = st.read(idx, &mut buf)? {
-                saves.push(SaveInfo {
-                    idx,
-                    len: data.len() as u32,
-                });
-            }
-        }
-        Ok(saves)
-    }
-}
--- a/Software/MainBoard/rust/src/hal/v4_hal.rs
+++ b/Software/MainBoard/rust/src/hal/v4_hal.rs
@@ -3,7 +3,7 @@ use crate::config::PlantControllerConfig;
 use crate::fat_error::{ContextExt, FatError, FatResult};
 use crate::hal::battery::BatteryInteraction;
 use crate::hal::esp::{hold_disable, hold_enable, Esp};
-use crate::hal::rtc::{BackupHeader, RTCModuleInteraction, EEPROM_PAGE, X25};
+use crate::hal::rtc::RTCModuleInteraction;
 use crate::hal::water::TankSensor;
 use crate::hal::{
    BoardInteraction, Detection, FreePeripherals, Moistures, Sensor, I2C_DRIVER, PLANT_COUNT,
@@ -13,10 +13,8 @@ use crate::log::{LogMessage, LOG_ACCESS};
 use alloc::boxed::Box;
 use alloc::string::ToString;
 use async_trait::async_trait;
-use bincode::config;
 use canapi::id::{classify, plant_id, MessageKind, IDENTIFY_CMD_OFFSET};
 use canapi::SensorSlot;
-use core::cmp::min;
 use embassy_embedded_hal::shared_bus::blocking::i2c::I2cDevice;
 use embassy_sync::blocking_mutex::raw::CriticalSectionRawMutex;
 use embassy_time::{Duration, Timer, WithTimeout};
@@ -32,12 +30,8 @@ use ina219::SyncIna219;
 use log::{error, info, warn};
 use measurements::Resistance;
 use measurements::{Current, Voltage};
-// use no_panic::no_panic;
 use pca9535::{GPIOBank, Pca9535Immediate, StandardExpanderInterface};

-pub const BACKUP_HEADER_MAX_SIZE: usize = 64;
-const CONFIG: config::Configuration = config::standard();
-
 const MPPT_CURRENT_SHUNT_OHMS: f64 = 0.05_f64;
 const TWAI_BAUDRATE: twai::BaudRate = twai::BaudRate::Custom(twai::TimingConfig {
    baud_rate_prescaler: 200, // 40MHz / 200 * 2 = 100 on C6, 100 * 20 = 2000 divisor, 40MHz / 2000 = 20kHz
@@ -340,12 +334,19 @@ impl<'a> BoardInteraction<'a> for V4<'a> {
                bail!("pump current sensor not available");
            }
            Some(pump_ina) => {
-                let raw = pump_ina.shunt_voltage()?;
-                let shunt_voltage =
-                    Voltage::from_microvolts(raw.shunt_voltage_uv().abs() as f64);
-                let shut_value = Resistance::from_ohms(0.05_f64);
-                let current = shunt_voltage.as_volts() / shut_value.as_ohms();
-                Ok(Current::from_amperes(current))
+                let v = pump_ina
+                    .shunt_voltage()
+                    .map_err(|e| FatError::String {
+                        error: alloc::format!("{e:?}"),
+                    })
+                    .map(|v| {
+                        let shunt_voltage =
+                            Voltage::from_microvolts(v.shunt_voltage_uv().abs() as f64);
+                        let shut_value = Resistance::from_ohms(0.05_f64);
+                        let current = shunt_voltage.as_volts() / shut_value.as_ohms();
+                        Current::from_amperes(current)
+                    })?;
+                Ok(v)
            }
        }
    }
@@ -363,7 +364,7 @@ impl<'a> BoardInteraction<'a> for V4<'a> {
    async fn measure_moisture_hz(&mut self) -> FatResult<Moistures> {
        self.can_power.set_high();
        Timer::after_millis(500).await;
-        let config = self.twai_config.take().context("twai config not set")?;
+        let config = self.twai_config.take().expect("twai config not set");
        let mut twai = config.into_async().start();

        if twai.is_bus_off() {
@@ -393,7 +394,7 @@ impl<'a> BoardInteraction<'a> for V4<'a> {
    async fn detect_sensors(&mut self, request: Detection) -> FatResult<Detection> {
        self.can_power.set_high();
        Timer::after_millis(500).await;
-        let config = self.twai_config.take().context("twai config not set")?;
+        let config = self.twai_config.take().expect("twai config not set");
        let mut twai = config.into_async().start();

        if twai.is_bus_off() {
@@ -537,74 +538,6 @@ impl<'a> BoardInteraction<'a> for V4<'a> {
        }
        Ok(())
    }
-    async fn backup_config(&mut self, controller_config: &PlantControllerConfig) -> FatResult<()> {
-        let mut buffer: [u8; 4096 - BACKUP_HEADER_MAX_SIZE] = [0; 4096 - BACKUP_HEADER_MAX_SIZE];
-        let length = bincode::encode_into_slice(controller_config, &mut buffer, CONFIG)?;
-        info!("Writing backup config of size {}", length);
-        let mut checksum = X25.digest();
-        checksum.update(&buffer[..length]);
-        let mut header_page_buffer = [0_u8; BACKUP_HEADER_MAX_SIZE];
-
-        let time = self.rtc_module.get_rtc_time().await?.timestamp_millis();
-        let header = BackupHeader {
-            crc16: checksum.finalize(),
-            timestamp: time,
-            size: length as u16,
-        };
-        info!("Header is {:?}", header);
-        bincode::encode_into_slice(&header, &mut header_page_buffer, CONFIG)?;
-        info!("Header is serialized");
-        self.get_rtc_module().write(0, &header_page_buffer)?;
-        info!("Header written");
-        let mut to_write = length;
-        let mut chunk: usize = 0;
-
-        while to_write > 0 {
-            self.progress(chunk as u32).await;
-            let start = chunk * EEPROM_PAGE;
-            let end = start + min(EEPROM_PAGE, to_write);
-            let part = &buffer[start..end];
-            info!(
-                "Writing chunk {} of size {} to offset {}",
-                chunk,
-                part.len(),
-                start
-            );
-            to_write -= part.len();
-            chunk += 1;
-            self.get_rtc_module()
-                .write((BACKUP_HEADER_MAX_SIZE + chunk * EEPROM_PAGE) as u32, part)?;
-        }
-        info!("Backup complete");
-        self.clear_progress().await;
-        Ok(())
-    }
-
-    async fn read_backup(&mut self) -> FatResult<PlantControllerConfig> {
-        let info = self.backup_info().await?;
-        let mut store = alloc::vec![0_u8; info.size as usize];
-        self.rtc_module
-            .read(BACKUP_HEADER_MAX_SIZE as u32, store.as_mut_slice())?;
-        let mut checksum = X25.digest();
-        checksum.update(&store[..]);
-        let crc = checksum.finalize();
-        if crc != info.crc16 {
-            bail!("CRC mismatch in backup data")
-        }
-        let (decoded, _) = bincode::decode_from_slice(&store[..], CONFIG)?;
-        Ok(decoded)
-    }
-
-    async fn backup_info(&mut self) -> FatResult<BackupHeader> {
-        let mut header_page_buffer = [0_u8; BACKUP_HEADER_MAX_SIZE];
-        self.get_rtc_module().read(0, &mut header_page_buffer)?;
-        info!("Read header page");
-        let info: Result<(BackupHeader, usize), bincode::error::DecodeError> =
-            bincode::decode_from_slice(&header_page_buffer[..], CONFIG);
-        info!("decoding header: {:?}", info);
-        let (header, _) = info.context("Could not read backup header")?;
-        Ok(header)
-    }
 }

 async fn wait_for_can_measurements(
--- a/Software/MainBoard/rust/src/hal/water.rs
+++ b/Software/MainBoard/rust/src/hal/water.rs
@@ -33,8 +33,7 @@ impl<'a> TankSensor<'a> {
        one_wire_pin.apply_output_config(&OutputConfig::default().with_pull(Pull::None));

        let mut adc1_config = AdcConfig::new();
-        let tank_pin =
-            adc1_config.enable_pin_with_cal::<_, AdcCalLine<_>>(gpio5, Attenuation::_11dB);
+        let tank_pin = adc1_config.enable_pin_with_cal::<_, AdcCalLine<_>>(gpio5, Attenuation::_11dB);
        let tank_channel = Adc::new(adc1, adc1_config);

        let one_wire_bus = OneWire::new(one_wire_pin, false);
@@ -142,17 +141,12 @@ impl<'a> TankSensor<'a> {
            let value = self.tank_channel.read_oneshot(&mut self.tank_pin);
            //force yield
            Timer::after_millis(10).await;
-            match value {
-                Ok(v) => *sample = v,
-                Err(e) => {
-                    bail!("ADC Hardware error: {:?}", e);
-                }
-            };
+            *sample = value.unwrap();
        }
        self.tank_power.set_low();

        store.sort();
        let median_mv = store[TANK_MULTI_SAMPLE / 2] as f32;
-        Ok(median_mv / 1000.0)
+        Ok(median_mv/1000.0)
    }
 }
--- a/Software/MainBoard/rust/src/log/mod.rs
+++ b/Software/MainBoard/rust/src/log/mod.rs
@@ -97,7 +97,7 @@ pub async fn log(
 impl LogArray {
    pub fn get(&mut self) -> Vec<LogEntry> {
        let head: RangedU8<0, MAX_LOG_ARRAY_INDEX> =
-            RangedU8::new(self.head).unwrap_or(RangedU8::new_saturating(0));
+            RangedU8::new(self.head).unwrap_or(RangedU8::new(0).unwrap());

        let mut rv: Vec<LogEntry> = Vec::new();
        let mut index = head.wrapping_sub(1);
@@ -120,7 +120,7 @@ impl LogArray {
        txt_long: &str,
    ) {
        let mut head: RangedU8<0, MAX_LOG_ARRAY_INDEX> =
-            RangedU8::new(self.head).unwrap_or(RangedU8::new_saturating(0));
+            RangedU8::new(self.head).unwrap_or(RangedU8::new(0).unwrap());

        let mut txt_short_stack: heapless::String<TXT_SHORT_LENGTH> = heapless::String::new();
        let mut txt_long_stack: heapless::String<TXT_LONG_LENGTH> = heapless::String::new();
@@ -281,8 +281,6 @@ pub enum LogMessage {
    PumpMissingSensorCurrent,
    #[strum(serialize = "MPPT Current sensor could not be reached")]
    MPPTError,
-    #[strum(serialize = "Parsing error reading message")]
-    UnknownMessage,
 }

 #[derive(Serialize)]
@@ -303,7 +301,7 @@ impl From<&LogMessage> for MessageTranslation {
 impl LogMessage {
    pub fn log_localisation_config() -> Vec<MessageTranslation> {
        Vec::from_iter((0..LogMessage::len()).map(|i| {
-            let msg_type = LogMessage::from_ordinal(i).unwrap_or(LogMessage::UnknownMessage);
+            let msg_type = LogMessage::from_ordinal(i).unwrap();
            (&msg_type).into()
        }))
    }
--- a/Software/MainBoard/rust/src/main.rs
+++ b/Software/MainBoard/rust/src/main.rs
@@ -8,7 +8,6 @@
    reason = "mem::forget is generally not safe to do with esp_hal types, especially those \
    holding buffers for the duration of a data transfer."
 )]
-#![deny(clippy::unwrap_used, clippy::expect_used, clippy::panic)]

 //TODO insert version here and read it in other parts, also read this for the ota webview
 esp_bootloader_esp_idf::esp_app_desc!();
@@ -40,7 +39,7 @@ use embassy_net::Stack;
 use embassy_sync::blocking_mutex::raw::CriticalSectionRawMutex;
 use embassy_sync::mutex::{Mutex, MutexGuard};
 use embassy_sync::once_lock::OnceLock;
-use embassy_time::{Duration, Instant, Timer};
+use embassy_time::{Duration, Instant, Timer, WithTimeout};
 use esp_hal::rom::ets_delay_us;
 use esp_hal::system::software_reset;
 use esp_println::{logger, println};
@@ -248,7 +247,7 @@ async fn safe_main(spawner: Spawner) -> FatResult<()> {
        let reboot_now = Arc::new(AtomicBool::new(false));
        println!("starting webserver");

-        let _ = http_server(reboot_now.clone(), stack);
+        spawner.spawn(http_server(reboot_now.clone(), stack))?;
        wait_infinity(board, WaitType::MissingConfig, reboot_now.clone()).await;
    }

@@ -298,9 +297,7 @@ async fn safe_main(spawner: Spawner) -> FatResult<()> {

    if let NetworkMode::Wifi { ref ip_address, .. } = network_mode {
        publish_firmware_info(&mut board, version, ip_address, &timezone_time.to_rfc3339()).await;
-        publish_battery_state(&mut board).await.unwrap_or_else(|e| {
-            error!("Error publishing battery state {e}");
-        });
+        publish_battery_state(&mut board).await;
        let _ = publish_mppt_state(&mut board).await;
    }

@@ -329,12 +326,7 @@ async fn safe_main(spawner: Spawner) -> FatResult<()> {
        info!("executing config mode override");
        //config upload will trigger reboot!
        let reboot_now = Arc::new(AtomicBool::new(false));
-        let stack_val = stack.take();
-        if let Some(s) = stack_val {
-            spawner.spawn(http_server(reboot_now.clone(), s))?;
-        } else {
-            bail!("Network stack missing, hard abort")
-        }
+        spawner.spawn(http_server(reboot_now.clone(), stack.take().unwrap()))?;
        wait_infinity(board, WaitType::ConfigButton, reboot_now.clone()).await;
    } else {
        LOG_ACCESS
@@ -414,11 +406,7 @@ async fn safe_main(spawner: Spawner) -> FatResult<()> {
    }
    info!("Water temp is {}", water_temp.as_ref().unwrap_or(&0.));

-    publish_tank_state(&mut board, &tank_state, water_temp)
-        .await
-        .unwrap_or_else(|e| {
-            error!("Error publishing tank state {e}");
-        });
+    publish_tank_state(&mut board, &tank_state, water_temp).await;

    let moisture = board.board_hal.measure_moisture_hz().await?;

@@ -433,11 +421,7 @@ async fn safe_main(spawner: Spawner) -> FatResult<()> {
        PlantState::read_hardware_state(moisture, 7, &mut board).await,
    ];

-    publish_plant_states(&mut board, &timezone_time.clone(), &plantstate)
-        .await
-        .unwrap_or_else(|e| {
-            error!("Error publishing plant states {e}");
-        });
+    publish_plant_states(&mut board, &timezone_time.clone(), &plantstate).await;

    let pump_required = plantstate
        .iter()
@@ -641,18 +625,14 @@ async fn safe_main(spawner: Spawner) -> FatResult<()> {

    if stay_alive {
        let reboot_now = Arc::new(AtomicBool::new(false));
-        if let Some(s) = stack.take() {
-            spawner.spawn(http_server(reboot_now.clone(), s))?;
-            wait_infinity(board, WaitType::MqttConfig, reboot_now.clone()).await;
-        } else {
-            bail!("Network Stack missing, hard abort");
-        }
+        spawner.spawn(http_server(reboot_now.clone(), stack.take().unwrap()))?;
+        wait_infinity(board, WaitType::MqttConfig, reboot_now.clone()).await;
    } else {
        //TODO wait for all mqtt publishes?
        Timer::after_millis(5000).await;

        board.board_hal.get_esp().set_restart_to_conf(false);
-        let _ = board
+        board
            .board_hal
            .deep_sleep(1000 * 1000 * 60 * deep_sleep_duration_minutes as u64)
            .await;
@@ -821,29 +801,30 @@ async fn publish_tank_state(
    board: &mut MutexGuard<'_, CriticalSectionRawMutex, HAL<'static>>,
    tank_state: &TankState,
    water_temp: FatResult<f32>,
-) -> FatResult<()> {
+) {
    let state = serde_json::to_string(
        &tank_state.as_mqtt_info(&board.board_hal.get_config().tank, &water_temp),
-    )?;
+    )
+    .unwrap();
    board
        .board_hal
        .get_esp()
        .mqtt_publish("/water", &state)
        .await;
-    Ok(())
 }

 async fn publish_plant_states(
    board: &mut MutexGuard<'_, CriticalSectionRawMutex, HAL<'static>>,
    timezone_time: &DateTime<Tz>,
    plantstate: &[PlantState; 8],
-) -> FatResult<()> {
+) {
    for (plant_id, (plant_state, plant_conf)) in plantstate
        .iter()
        .zip(&board.board_hal.get_config().plants.clone())
        .enumerate()
    {
-        let state = serde_json::to_string(&plant_state.to_mqtt_info(plant_conf, timezone_time))?;
+        let state =
+            serde_json::to_string(&plant_state.to_mqtt_info(plant_conf, timezone_time)).unwrap();
        let plant_topic = format!("/plant{}", plant_id + 1);
        let _ = board
            .board_hal
@@ -851,7 +832,6 @@ async fn publish_plant_states(
            .mqtt_publish(&plant_topic, &state)
            .await;
    }
-    Ok(())
 }

 async fn publish_firmware_info(
@@ -1003,11 +983,11 @@ async fn publish_mppt_state(

 async fn publish_battery_state(
    board: &mut MutexGuard<'_, CriticalSectionRawMutex, HAL<'static>>,
-) -> FatResult<()> {
+) -> () {
    let state = board.board_hal.get_battery_monitor().get_state().await;
    let value = match state {
        Ok(state) => {
-            let json = serde_json::to_string(&state)?.to_owned();
+            let json = serde_json::to_string(&state).unwrap().to_owned();
            json.to_owned()
        }
        Err(_) => "error".to_owned(),
@@ -1019,7 +999,6 @@ async fn publish_battery_state(
            .mqtt_publish("/battery", &value)
            .await;
    }
-    Ok(())
 }

 async fn wait_infinity(
@@ -1066,7 +1045,8 @@ async fn wait_infinity(
                exit_hold_blink = !exit_hold_blink;

                let progress = core::cmp::min(elapsed, exit_hold_duration);
-                let lit = ((progress.as_millis() * 8) / exit_hold_duration.as_millis())
+                let lit = ((progress.as_millis() as u64 * 8)
+                    / exit_hold_duration.as_millis() as u64)
                    .saturating_add(1)
                    .min(8) as usize;

@@ -1216,8 +1196,6 @@ async fn handle_serial_config(
    }
 }

-use embassy_time::WithTimeout;
-#[allow(clippy::panic, clippy::unwrap_used, clippy::expect_used)]
 #[esp_rtos::main]
 async fn main(spawner: Spawner) -> ! {
    // intialize embassy
--- a/Software/MainBoard/rust/src/plant_state.rs
+++ b/Software/MainBoard/rust/src/plant_state.rs
@@ -1,4 +1,3 @@
-use bincode::{Decode, Encode};
 use crate::hal::Moistures;
 use crate::{config::PlantConfig, hal::HAL, in_time_range};
 use chrono::{DateTime, TimeDelta, Utc};
@@ -71,7 +70,7 @@ impl PumpState {
    }
 }

-#[derive(Serialize, Deserialize, Clone, Copy, Debug, PartialEq, Encode, Decode)]
+#[derive(Serialize, Deserialize, Clone, Copy, Debug, PartialEq)]
 pub enum PlantWateringMode {
    Off,
    TargetMoisture,
--- a/Software/MainBoard/rust/src/tank.rs
+++ b/Software/MainBoard/rust/src/tank.rs
@@ -158,11 +158,12 @@ pub async fn determine_tank_state(
    board: &mut MutexGuard<'static, CriticalSectionRawMutex, HAL<'static>>,
 ) -> TankState {
    if board.board_hal.get_config().tank.tank_sensor_enabled {
-        match board.board_hal.get_tank_sensor() {
-            Ok(sensor) => match sensor.tank_sensor_voltage().await {
-                Ok(raw_sensor_value_mv) => TankState::Present(raw_sensor_value_mv),
-                Err(err) => TankState::Error(TankError::BoardError(err.to_string())),
-            },
+        match board
+            .board_hal
+            .get_tank_sensor()
+            .map(|f| f.tank_sensor_voltage())
+        {
+            Ok(raw_sensor_value_mv) => TankState::Present(raw_sensor_value_mv.await.unwrap()),
            Err(err) => TankState::Error(TankError::BoardError(err.to_string())),
        }
    } else {
--- a/Software/MainBoard/rust/src/webserver/backup_manager.rs
+++ b/Software/MainBoard/rust/src/webserver/backup_manager.rs
@@ -1,7 +1,8 @@
 use crate::fat_error::{FatError, FatResult};
-use crate::webserver::read_up_to_bytes_from_request;
+use crate::hal::rtc::X25;
 use crate::BOARD_ACCESS;
 use alloc::borrow::ToOwned;
+use alloc::format;
 use alloc::string::{String, ToString};
 use chrono::DateTime;
 use edge_http::io::server::Connection;
@@ -20,9 +21,48 @@ pub(crate) async fn get_backup_config<T, const N: usize>(
 where
    T: Read + Write,
 {
-    let mut board = BOARD_ACCESS.get().await.lock().await;
-    let backup = board.board_hal.read_backup().await?;
+    // First pass: verify checksum without sending data
+    let mut checksum = X25.digest();
+    let mut chunk = 0_usize;
+    loop {
+        let mut board = BOARD_ACCESS.get().await.lock().await;
+        board.board_hal.progress(chunk as u32).await;
+        let (buf, len, expected_crc) = board
+            .board_hal
+            .get_rtc_module()
+            .get_backup_config(chunk)
+            .await?;

+        // Update checksum with the actual data bytes of this chunk
+        checksum.update(&buf[..len]);
+
+        let is_last = len == 0 || len < buf.len();
+        if is_last {
+            let actual_crc = checksum.finalize();
+            if actual_crc != expected_crc {
+                BOARD_ACCESS
+                    .get()
+                    .await
+                    .lock()
+                    .await
+                    .board_hal
+                    .clear_progress()
+                    .await;
+                conn.initiate_response(
+                    409,
+                    Some(
+                        format!("Checksum mismatch expected {expected_crc} got {actual_crc}")
+                            .as_str(),
+                    ),
+                    &[],
+                )
+                .await?;
+                return Ok(Some(409));
+            }
+            break;
+        }
+        chunk += 1;
+    }
    // Second pass: stream data
    conn.initiate_response(
        200,
@@ -35,8 +75,35 @@ where
    )
    .await?;

-    conn.write_all(serde_json::to_string(&backup)?.as_bytes())
-        .await?;
+    let mut chunk = 0_usize;
+    loop {
+        let mut board = BOARD_ACCESS.get().await.lock().await;
+        board.board_hal.progress(chunk as u32).await;
+        let (buf, len, _expected_crc) = board
+            .board_hal
+            .get_rtc_module()
+            .get_backup_config(chunk)
+            .await?;
+
+        if len == 0 {
+            break;
+        }
+
+        conn.write_all(&buf[..len]).await?;
+
+        if len < buf.len() {
+            break;
+        }
+        chunk += 1;
+    }
+    BOARD_ACCESS
+        .get()
+        .await
+        .lock()
+        .await
+        .board_hal
+        .clear_progress()
+        .await;
    Ok(Some(200))
 }

@@ -46,12 +113,49 @@ pub(crate) async fn backup_config<T, const N: usize>(
 where
    T: Read + Write,
 {
-    let input = read_up_to_bytes_from_request(conn, Some(4096)).await?;
-    info!("Read input with length {}", input.len());
+    let mut offset = 0_usize;
+    let mut buf = [0_u8; 32];
+
+    let mut checksum = X25.digest();
+
+    let mut counter = 0;
+    loop {
+        let to_write = conn.read(&mut buf).await?;
+        if to_write == 0 {
+            info!("backup finished");
+            break;
+        } else {
+            let mut board = BOARD_ACCESS.get().await.lock().await;
+            board.board_hal.progress(counter).await;
+
+            counter += 1;
+            board
+                .board_hal
+                .get_rtc_module()
+                .backup_config(offset, &buf[0..to_write])
+                .await?;
+            checksum.update(&buf[0..to_write]);
+        }
+        offset += to_write;
+    }
+
    let mut board = BOARD_ACCESS.get().await.lock().await;
-    let config_to_backup = serde_json::from_slice(&input)?;
-    info!("Parsed send config to object");
-    board.board_hal.backup_config(&config_to_backup).await?;
+    board
+        .board_hal
+        .get_rtc_module()
+        .backup_config_finalize(checksum.finalize(), offset)
+        .await?;
+    board.board_hal.clear_progress().await;
+    conn.initiate_response(
+        200,
+        Some("OK"),
+        &[
+            ("Access-Control-Allow-Origin", "*"),
+            ("Access-Control-Allow-Headers", "*"),
+            ("Access-Control-Allow-Methods", "*"),
+        ],
+    )
+    .await?;
    Ok(Some("saved".to_owned()))
 }

@@ -62,12 +166,10 @@ where
    T: Read + Write,
 {
    let mut board = BOARD_ACCESS.get().await.lock().await;
-    let info = board.board_hal.backup_info().await;
-
-    let json = match info {
+    let header = board.board_hal.get_rtc_module().get_backup_info().await;
+    let json = match header {
        Ok(h) => {
-            info!("Got backup info: {:?}", h);
-            let timestamp = DateTime::from_timestamp_millis(h.timestamp).unwrap_or_default();
+            let timestamp = DateTime::from_timestamp_millis(h.timestamp).unwrap();
            let wbh = WebBackupHeader {
                timestamp: timestamp.to_rfc3339(),
                size: h.size,
@@ -75,7 +177,6 @@ where
            serde_json::to_string(&wbh)?
        }
        Err(err) => {
-            info!("Error getting backup info: {:?}", err);
            let wbh = WebBackupHeader {
                timestamp: err.to_string(),
                size: 0,
--- a/Software/MainBoard/rust/src/webserver/file_manager.rs
+++ b/Software/MainBoard/rust/src/webserver/file_manager.rs
@@ -0,0 +1,160 @@
+use crate::fat_error::{FatError, FatResult};
+use crate::webserver::read_up_to_bytes_from_request;
+use crate::BOARD_ACCESS;
+use alloc::borrow::ToOwned;
+use alloc::format;
+use alloc::string::String;
+use edge_http::io::server::Connection;
+use edge_http::Method;
+use edge_nal::io::{Read, Write};
+use log::info;
+
+pub(crate) async fn list_files<T, const N: usize>(
+    _request: &mut Connection<'_, T, N>,
+) -> FatResult<Option<String>> {
+    let mut board = BOARD_ACCESS.get().await.lock().await;
+    let result = board.board_hal.get_esp().list_files().await?;
+    let file_list_json = serde_json::to_string(&result)?;
+    Ok(Some(file_list_json))
+}
+pub(crate) async fn file_operations<T, const N: usize>(
+    conn: &mut Connection<'_, T, { N }>,
+    method: Method,
+    path: &&str,
+    prefix: &&str,
+) -> Result<Option<u32>, FatError>
+where
+    T: Read + Write,
+{
+    let filename = &path[prefix.len()..];
+    info!("file request for {filename} with method {method}");
+    Ok(match method {
+        Method::Delete => {
+            let mut board = BOARD_ACCESS.get().await.lock().await;
+            board
+                .board_hal
+                .get_esp()
+                .delete_file(filename.to_owned())
+                .await?;
+            conn.initiate_response(
+                200,
+                Some("OK"),
+                &[
+                    ("Access-Control-Allow-Origin", "*"),
+                    ("Access-Control-Allow-Headers", "*"),
+                    ("Access-Control-Allow-Methods", "*"),
+                ],
+            )
+            .await?;
+            Some(200)
+        }
+        Method::Get => {
+            let disposition = format!("attachment; filename=\"{filename}\"");
+            let size = {
+                let mut board = BOARD_ACCESS.get().await.lock().await;
+                board
+                    .board_hal
+                    .get_esp()
+                    .get_size(filename.to_owned())
+                    .await?
+            };
+
+            conn.initiate_response(
+                200,
+                Some("OK"),
+                &[
+                    ("Content-Type", "application/octet-stream"),
+                    ("Content-Disposition", disposition.as_str()),
+                    ("Content-Length", &format!("{size}")),
+                    ("Access-Control-Allow-Origin", "*"),
+                    ("Access-Control-Allow-Headers", "*"),
+                    ("Access-Control-Allow-Methods", "*"),
+                ],
+            )
+            .await?;
+
+            let mut chunk = 0;
+            loop {
+                let mut board = BOARD_ACCESS.get().await.lock().await;
+                board.board_hal.progress(chunk).await;
+                let read_chunk = board
+                    .board_hal
+                    .get_esp()
+                    .get_file(filename.to_owned(), chunk)
+                    .await?;
+                let length = read_chunk.1;
+                if length == 0 {
+                    info!("file request for {filename} finished");
+                    break;
+                }
+                let data = &read_chunk.0[0..length];
+                conn.write_all(data).await?;
+                if length < read_chunk.0.len() {
+                    info!("file request for {filename} finished");
+                    break;
+                }
+                chunk += 1;
+            }
+            BOARD_ACCESS
+                .get()
+                .await
+                .lock()
+                .await
+                .board_hal
+                .clear_progress()
+                .await;
+            Some(200)
+        }
+        Method::Post => {
+            {
+                let mut board = BOARD_ACCESS.get().await.lock().await;
+                //ensure the file is deleted first; otherwise we would need to truncate the file which will not work with streaming
+                let _ = board
+                    .board_hal
+                    .get_esp()
+                    .delete_file(filename.to_owned())
+                    .await;
+            }
+
+            let mut offset = 0_usize;
+            let mut chunk = 0;
+            loop {
+                let buf = read_up_to_bytes_from_request(conn, Some(4096)).await?;
+                if buf.is_empty() {
+                    info!("file request for {filename} finished");
+                    break;
+                } else {
+                    let mut board = BOARD_ACCESS.get().await.lock().await;
+                    board.board_hal.progress(chunk as u32).await;
+                    board
+                        .board_hal
+                        .get_esp()
+                        .write_file(filename.to_owned(), offset as u32, &buf)
+                        .await?;
+                }
+                offset += buf.len();
+                chunk += 1;
+            }
+            BOARD_ACCESS
+                .get()
+                .await
+                .lock()
+                .await
+                .board_hal
+                .clear_progress()
+                .await;
+            conn.initiate_response(
+                200,
+                Some("OK"),
+                &[
+                    ("Access-Control-Allow-Origin", "*"),
+                    ("Access-Control-Allow-Headers", "*"),
+                    ("Access-Control-Allow-Methods", "*"),
+                ],
+            )
+            .await?;
+            Some(200)
+        }
+        _ => None,
+    })
+}
--- a/Software/MainBoard/rust/src/webserver/get_json.rs
+++ b/Software/MainBoard/rust/src/webserver/get_json.rs
@@ -114,41 +114,14 @@ pub(crate) async fn get_version_web<T, const N: usize>(
    Ok(Some(serde_json::to_string(&get_version(&mut board).await)?))
 }

-/// Return the current in-memory config, or — when `saveidx` is `Some(idx)` —
-/// the JSON stored in save slot `idx`.
 pub(crate) async fn get_config<T, const N: usize>(
    _request: &mut Connection<'_, T, N>,
-    saveidx: Option<usize>,
 ) -> FatResult<Option<String>> {
    let mut board = BOARD_ACCESS.get().await.lock().await;
-    let json = match saveidx {
-        None => serde_json::to_string(board.board_hal.get_config())?,
-        Some(idx) => {
-             board.board_hal.get_esp().load_config_slot(idx).await?
-        }
-    };
+    let json = serde_json::to_string(&board.board_hal.get_config())?;
    Ok(Some(json))
 }

-/// Return a JSON array describing every valid save slot on flash.
-pub(crate) async fn list_saves<T, const N: usize>(
-    _request: &mut Connection<'_, T, N>,
-) -> FatResult<Option<String>> {
-    let mut board = BOARD_ACCESS.get().await.lock().await;
-    let saves = board.board_hal.get_esp().list_saves().await?;
-    Ok(Some(serde_json::to_string(&saves)?))
-}
-
-/// Erase (delete) a single save slot by index.
-pub(crate) async fn delete_save<T, const N: usize>(
-    _request: &mut Connection<'_, T, N>,
-    idx: usize,
-) -> FatResult<Option<String>> {
-    let mut board = BOARD_ACCESS.get().await.lock().await;
-    board.board_hal.get_esp().delete_save_slot(idx).await?;
-    Ok(None)
-}
-
 pub(crate) async fn get_battery_state<T, const N: usize>(
    _request: &mut Connection<'_, T, N>,
 ) -> FatResult<Option<String>> {
--- a/Software/MainBoard/rust/src/webserver/mod.rs
+++ b/Software/MainBoard/rust/src/webserver/mod.rs
@@ -1,6 +1,7 @@
 //offer ota and config mode

 mod backup_manager;
+mod file_manager;
 mod get_json;
 mod get_log;
 mod get_static;
@@ -9,9 +10,10 @@ mod post_json;

 use crate::fat_error::{FatError, FatResult};
 use crate::webserver::backup_manager::{backup_config, backup_info, get_backup_config};
+use crate::webserver::file_manager::{file_operations, list_files};
 use crate::webserver::get_json::{
    get_battery_state, get_config, get_live_moisture, get_log_localization_config, get_solar_state,
-    delete_save, get_time, get_timezones, get_version_web, list_saves, tank_info,
+    get_time, get_timezones, get_version_web, tank_info,
 };
 use crate::webserver::get_log::get_log;
 use crate::webserver::get_static::{serve_bundle, serve_favicon, serve_index};
@@ -58,7 +60,10 @@ impl Handler for HTTPRequestRouter {
        let method = headers.method;
        let path = headers.path;

-        let status = if path == "/ota" {
+        let prefix = "/file?filename=";
+        let status = if path.starts_with(prefix) {
+            file_operations(conn, method, &path, &prefix).await?
+        } else if path == "/ota" {
            ota_operations(conn, method).await.map_err(|e| {
                error!("Error handling ota: {e}");
                e
@@ -77,20 +82,13 @@ impl Handler for HTTPRequestRouter {
                            "/time" => Some(get_time(conn).await),
                            "/battery" => Some(get_battery_state(conn).await),
                            "/solar" => Some(get_solar_state(conn).await),
+                            "/get_config" => Some(get_config(conn).await),
+                            "/files" => Some(list_files(conn).await),
                            "/log_localization" => Some(get_log_localization_config(conn).await),
                            "/tank" => Some(tank_info(conn).await),
                            "/backup_info" => Some(backup_info(conn).await),
                            "/timezones" => Some(get_timezones().await),
                            "/moisture" => Some(get_live_moisture(conn).await),
-                            "/list_saves" => Some(list_saves(conn).await),
-                            // /get_config accepts an optional ?saveidx=N query parameter
-                            p if p == "/get_config" || p.starts_with("/get_config?") => {
-                                let saveidx: Option<usize> = p
-                                    .find("saveidx=")
-                                    .and_then(|pos| p[pos + 8..].split('&').next())
-                                    .and_then(|s| s.parse().ok());
-                                Some(get_config(conn, saveidx).await)
-                            }
                            _ => None,
                        };
                        match json {
@@ -129,26 +127,7 @@ impl Handler for HTTPRequestRouter {
                        Some(json) => Some(handle_json(conn, json).await?),
                    }
                }
-                Method::Delete => {
-                    // DELETE /delete_save?idx=N
-                    let json = if path == "/delete_save" || path.starts_with("/delete_save?") {
-                        let idx: Option<usize> = path
-                            .find("idx=")
-                            .and_then(|pos| path[pos + 4..].split('&').next())
-                            .and_then(|s| s.parse().ok());
-                        match idx {
-                            Some(idx) => Some(delete_save(conn, idx).await),
-                            None => Some(Err(FatError::String { error: "missing idx parameter".into() })),
-                        }
-                    } else {
-                        None
-                    };
-                    match json {
-                        None => None,
-                        Some(json) => Some(handle_json(conn, json).await?),
-                    }
-                }
-                Method::Options | Method::Head | Method::Put => None,
+                Method::Options | Method::Delete | Method::Head | Method::Put => None,
                _ => None,
            }
        };
@@ -202,7 +181,6 @@ where
 }

 #[embassy_executor::task]
-#[allow(clippy::panic, clippy::unwrap_used, clippy::expect_used)]
 pub async fn http_server(reboot_now: Arc<AtomicBool>, stack: Stack<'static>) {
    let buffer: TcpBuffers<2, 1024, 1024> = TcpBuffers::new();
    let tcp = Tcp::new(stack, &buffer);
--- a/Software/MainBoard/rust/src/webserver/post_json.rs
+++ b/Software/MainBoard/rust/src/webserver/post_json.rs
@@ -108,7 +108,7 @@ where
 {
    let actual_data = read_up_to_bytes_from_request(request, None).await?;
    let time: SetTime = serde_json::from_slice(&actual_data)?;
-    let parsed = DateTime::parse_from_rfc3339(time.time)?;
+    let parsed = DateTime::parse_from_rfc3339(time.time).unwrap();
    esp_set_time(parsed).await?;
    Ok(None)
 }
--- a/Software/MainBoard/rust/src_webpack/src/api.ts
+++ b/Software/MainBoard/rust/src_webpack/src/api.ts
@@ -34,11 +34,6 @@ export interface NetworkConfig {
    max_wait: number
 }

-export interface SaveInfo {
-    idx: number,
-    len: number,
-}
-
 export interface FileList {
    total: number,
    used: number,
--- a/Software/MainBoard/rust/src_webpack/src/fileview.html
+++ b/Software/MainBoard/rust/src_webpack/src/fileview.html
@@ -29,7 +29,41 @@
  }
 </style>

-<div class="subtitle">Save Slots:</div>
+<div class="subtitle">Files:</div>
+<div class="flexcontainer">
+  <div class="filekey">Total Size</div>
+  <div id="filetotalsize" class="filevalue"></div>
+</div>
+<div class="flexcontainer">
+  <div class="filekey">Used Size</div>
+  <div id="fileusedsize" class="filevalue"></div>
+</div>
+<div class="flexcontainer">
+  <div class="filekey">Free Size</div>
+  <div id="filefreesize" class="filevalue"></div>
+</div>
+<br>
+
+<div class="flexcontainer"  style="border-left-style: double; border-right-style: double; border-top-style: double;">
+  <div class="subtitle" >Upload:</div>
+</div>
+<div class="flexcontainer" style="border-left-style: double; border-right-style: double;">
+  <div class="flexcontainer">
+    <div class="filekey">
+      File:
+    </div>
+    <input id="fileuploadfile" class="filevalue" type="file">
+  </div>
+  <div class="flexcontainer">
+    <div class="filekey">
+      Name:
+    </div>
+    <input id="fileuploadname" class="filevalue" type="text">
+  </div>
+</div>
+<div class="flexcontainer" style="border-left-style: double; border-right-style: double; border-bottom-style: double;">
+  <button id="fileuploadbtn" class="subtitle">Upload</button>
+</div>
 <br>
 <div class="flexcontainer" style="border-left-style: double; border-right-style: double; border-top-style: double;">
  <div class="subtitle">List:</div>
--- a/Software/MainBoard/rust/src_webpack/src/fileview.ts
+++ b/Software/MainBoard/rust/src_webpack/src/fileview.ts
@@ -1,49 +1,96 @@
 import {Controller} from "./main";
-import {SaveInfo} from "./api";
+import {FileInfo, FileList} from "./api";
+const regex = /[^a-zA-Z0-9_.]/g;
+
+function sanitize(str:string){
+  return str.replaceAll(regex, '_')
+} 

 export class FileView {
  readonly fileListView: HTMLElement;
  readonly controller: Controller;
+  readonly filefreesize: HTMLElement;
+  readonly filetotalsize: HTMLElement;
+  readonly fileusedsize: HTMLElement;

  constructor(controller: Controller) {
    (document.getElementById("fileview") as HTMLElement).innerHTML = require('./fileview.html') as string;
-    this.fileListView = document.getElementById("fileList") as HTMLElement;
+    this.fileListView = document.getElementById("fileList") as HTMLElement
+    this.filefreesize = document.getElementById("filefreesize") as HTMLElement
+    this.filetotalsize = document.getElementById("filetotalsize") as HTMLElement
+    this.fileusedsize = document.getElementById("fileusedsize") as HTMLElement
+
+    let fileuploadfile = document.getElementById("fileuploadfile") as HTMLInputElement
+    let fileuploadname = document.getElementById("fileuploadname") as HTMLInputElement
+    let fileuploadbtn = document.getElementById("fileuploadbtn") as HTMLInputElement
+    fileuploadfile.onchange = () => {
+      const selectedFile = fileuploadfile.files?.[0];
+      if (selectedFile == null) {
+        //TODO error dialog here
+        return
+      }
+      
+      fileuploadname.value = sanitize(selectedFile.name)
+    };
+
+    fileuploadname.onchange = () => {
+      let input = fileuploadname.value
+      let clean = sanitize(fileuploadname.value)
+      if (input != clean){
+        fileuploadname.value = clean
+      }
+    }
+
+    fileuploadbtn.onclick = () => {
+      const selectedFile = fileuploadfile.files?.[0];
+      if (selectedFile == null) {
+        //TODO error dialog here
+        return
+      }
+      controller.uploadFile(selectedFile, selectedFile.name)
+    }
+
+
+
    this.controller = controller;
  }

-  setSaveList(saves: SaveInfo[], public_url: string) {
-    // Sort newest first (highest index = most recently written slot)
-    const sorted = saves.slice().sort((a, b) => b.idx - a.idx);
+  setFileList(fileList: FileList, public_url: string) {
+    this.filetotalsize.innerText = Math.floor(fileList.total / 1024) + "kB"
+    this.fileusedsize.innerText = Math.ceil(fileList.used / 1024) + "kB"
+    this.filefreesize.innerText = Math.ceil((fileList.total - fileList.used) / 1024) + "kB"

-    this.fileListView.textContent = "";
-    for (let i = 0; i < sorted.length; i++) {
-      new SaveEntry(this.controller, i, sorted[i], this.fileListView, public_url);
+    //fast clear
+    this.fileListView.textContent = ""
+    for (let i = 0; i < fileList.files.length; i++) {
+      let file = fileList.files[i]
+      new FileEntry(this.controller, i, file, this.fileListView, public_url);
    }
  }
 }

-class SaveEntry {
+class FileEntry {
  view: HTMLElement;
-  constructor(controller: Controller, fileid: number, saveinfo: SaveInfo, parent: HTMLElement, public_url: string) {
-    this.view = document.createElement("div") as HTMLElement;
-    parent.appendChild(this.view);
-    this.view.classList.add("fileentryouter");
+  constructor(controller: Controller, fileid: number, fileinfo: FileInfo, parent: HTMLElement, public_url: string) {
+    this.view = document.createElement("div") as HTMLElement
+    parent.appendChild(this.view)
+    this.view.classList.add("fileentryouter")

    const template = require('./fileviewentry.html') as string;
-    this.view.innerHTML = template.replaceAll("${fileid}", String(fileid));
+    this.view.innerHTML = template.replaceAll("${fileid}", String(fileid))

    let name = document.getElementById("file_" + fileid + "_name") as HTMLElement;
    let size = document.getElementById("file_" + fileid + "_size") as HTMLElement;
    let deleteBtn = document.getElementById("file_" + fileid + "_delete") as HTMLButtonElement;
    deleteBtn.onclick = () => {
-      controller.deleteSlot(saveinfo.idx);
-    };
+      controller.deleteFile(fileinfo.filename);
+    }

    let downloadBtn = document.getElementById("file_" + fileid + "_download") as HTMLAnchorElement;
-    downloadBtn.href = public_url + "/get_config?saveidx=" + saveinfo.idx;
-    downloadBtn.download = "config_slot_" + saveinfo.idx + ".json";
+    downloadBtn.href = public_url + "/file?filename=" + fileinfo.filename
+    downloadBtn.download = fileinfo.filename

-    name.innerText = "Slot " + saveinfo.idx;
-    size.innerText = saveinfo.len + " bytes";
+    name.innerText = fileinfo.filename;
+    size.innerText = fileinfo.size.toString()
  }
 }
--- a/Software/MainBoard/rust/src_webpack/src/fileviewentry.html
+++ b/Software/MainBoard/rust/src_webpack/src/fileviewentry.html
@@ -1,12 +1,11 @@
 <div class="flexcontainer">
-    <div id="file_${fileid}_name" class="filetitle">Slot</div>
+    <div id="file_${fileid}_name" class="filetitle">Name</div>
 </div>

 <div class="flexcontainer">
    <div class="filekey">Size</div>
-    <div id="file_${fileid}_size" class="filevalue"></div>
-    <a id="file_${fileid}_download" class="filevalue" target="_blank">Download</a>
-    <button id="file_${fileid}_delete" class="filevalue">Delete</button>
+    <div id = "file_${fileid}_size" class="filevalue"></div>
+    <a id = "file_${fileid}_download" class="filevalue" target="_blank">Download</a>
+    <button id = "file_${fileid}_delete" class="filevalue">Delete</button>
 </div>

-
--- a/Software/MainBoard/rust/src_webpack/src/main.ts
+++ b/Software/MainBoard/rust/src_webpack/src/main.ts
@@ -29,7 +29,7 @@ import {
    SetTime, SSIDList, TankInfo,
    TestPump,
    VersionInfo,
-    SaveInfo, SolarState, PumpTestResult, Detection, CanPower
+    FileList, SolarState, PumpTestResult, Detection, CanPower
 } from "./api";
 import {SolarView} from "./solarview";
 import {toast} from "./toast";
@@ -93,36 +93,65 @@ export class Controller {
        }
    }

-    async updateSaveList(): Promise<void> {
+    async updateFileList(): Promise<void> {
        try {
-            const response = await fetch(PUBLIC_URL + "/list_saves");
+            const response = await fetch(PUBLIC_URL + "/files");
            const json = await response.json();
-            const saves = json as SaveInfo[];
-            controller.fileview.setSaveList(saves, PUBLIC_URL);
+            const filelist = json as FileList;
+            controller.fileview.setFileList(filelist, PUBLIC_URL);
        } catch (error) {
            console.log(error);
        }
    }

-    deleteSlot(idx: number) {
-        controller.progressview.addIndeterminate("slot_delete", "Deleting slot " + idx);
+    uploadFile(file: File, name: string) {
+        let current = 0;
+        let max = 100;
+        controller.progressview.addProgress("file_upload", (current / max) * 100, "Uploading File " + name + "(" + current + "/" + max + ")")
        const ajax = new XMLHttpRequest();
-        ajax.open("DELETE", PUBLIC_URL + "/delete_save?idx=" + idx);
-        ajax.send();
-        ajax.addEventListener("error", () => {
-            controller.progressview.removeProgress("slot_delete");
-            alert("Error deleting slot");
-            controller.updateSaveList();
-        }, false);
-        ajax.addEventListener("abort", () => {
-            controller.progressview.removeProgress("slot_delete");
-            alert("Aborted deleting slot");
-            controller.updateSaveList();
+        ajax.upload.addEventListener("progress", event => {
+            current = event.loaded / 1000;
+            max = event.total / 1000;
+            controller.progressview.addProgress("file_upload", (current / max) * 100, "Uploading File " + name + "(" + current + "/" + max + ")")
        }, false);
        ajax.addEventListener("load", () => {
-            controller.progressview.removeProgress("slot_delete");
-            controller.updateSaveList();
+            controller.progressview.removeProgress("file_upload")
+            controller.updateFileList()
        }, false);
+        ajax.addEventListener("error", () => {
+            alert("Error upload")
+            controller.progressview.removeProgress("file_upload")
+            controller.updateFileList()
+        }, false);
+        ajax.addEventListener("abort", () => {
+            alert("abort upload")
+            controller.progressview.removeProgress("file_upload")
+            controller.updateFileList()
+        }, false);
+        ajax.open("POST", PUBLIC_URL + "/file?filename=" + name);
+        ajax.send(file);
+    }
+
+    deleteFile(name: string) {
+        controller.progressview.addIndeterminate("file_delete", "Deleting " + name);
+        const ajax = new XMLHttpRequest();
+        ajax.open("DELETE", PUBLIC_URL + "/file?filename=" + name);
+        ajax.send();
+        ajax.addEventListener("error", () => {
+            controller.progressview.removeProgress("file_delete")
+            alert("Error delete")
+            controller.updateFileList()
+        }, false);
+        ajax.addEventListener("abort", () => {
+            controller.progressview.removeProgress("file_delete")
+            alert("Error upload")
+            controller.updateFileList()
+        }, false);
+        ajax.addEventListener("load", () => {
+            controller.progressview.removeProgress("file_delete")
+            controller.updateFileList()
+        }, false);
+        controller.updateFileList()
    }

    async updateRTCData(): Promise<void> {
@@ -639,7 +668,7 @@ const tasks = [
    {task: controller.updateSolarData, displayString: "Updating Solar Data"},
    {task: controller.downloadConfig, displayString: "Downloading Configuration"},
    {task: controller.version, displayString: "Fetching Version Information"},
-    {task: controller.updateSaveList, displayString: "Updating Save Slots"},
+    {task: controller.updateFileList, displayString: "Updating File List"},
    {task: controller.getBackupInfo, displayString: "Fetching Backup Information"},
    {task: controller.loadLogLocaleConfig, displayString: "Loading Log Localization Config"},
    {task: controller.loadTankInfo, displayString: "Loading Tank Information"},
Author	SHA1	Message	Date
Empire Phoenix	07aed02fe7	fix mqtt not starting webserver	2026-04-06 12:54:18 +02:00
Empire	aef0ffd5a1	add v1 revisio of bms	2026-04-06 12:40:52 +02:00
				`@@ -0,0 +1 @@`
				`{"ARCHIVE_NAME": "", "EXTRA_LAYERS": "", "ALL_ACTIVE_LAYERS": false, "EXTEND_EDGE_CUT": false, "ALTERNATIVE_EDGE_CUT": false, "AUTO TRANSLATE": true, "AUTO FILL": true, "EXCLUDE DNP": false, "OPEN BROWSER": true, "NO_BACKUP_OPT": false}`