rework wifi controller share

board/modules/Sensors_simplified/Sensors/Sensors.kicad_pro

@@ -460,6 +460,7 @@
       "single_global_label": "ignore",
       "unannotated": "error",
       "unconnected_wire_endpoint": "warning",
+      "undefined_netclass": "error",
       "unit_value_mismatch": "error",
       "unresolved_variable": "error",
       "wire_dangling": "error"

rust/.cargo/config.toml

@@ -1,26 +1,29 @@
 [build]
-#target = "xtensa-esp32-espidf"
+rustflags = [
-target = "riscv32imac-esp-espidf"
+    # Required to obtain backtraces (e.g. when using the "esp-backtrace" crate.)
+    # NOTE: May negatively impact performance of produced code
+    "-C", "force-frame-pointers",
+    "-Z", "stack-protector=all",
+    "-C", "link-arg=-Tlinkall.x",
+]
 
-[target.riscv32imac-esp-espidf]
+target = "riscv32imac-unknown-none-elf"
-linker = "ldproxy"
+
+[target.riscv32imac-unknown-none-elf]
+runner = "espflash flash --monitor --chip esp32c6 --baud 921600 --partition-table partitions.csv"
 #runner = "espflash flash --monitor --baud 921600 --partition-table partitions.csv -b no-reset" # Select this runner in case of usb ttl
-runner = "espflash flash --monitor"
+#runner = "espflash flash --monitor"
 #runner = "cargo runner"
 
 
 #runner = "espflash flash --monitor --partition-table partitions.csv -b no-reset" # create upgrade image file for webupload
 # runner = espflash erase-parts otadata  //ensure flash is clean
 
-rustflags = ["--cfg", "espidf_time64"] # Extending time_t for ESP IDF 5: https://github.com/esp-rs/rust/issues/110
-
-[unstable]
-build-std = ["std", "panic_abort"]
-
 [env]
-MCU = "esp32c6"
-# Note: this variable is not used by the pio builder (`cargo build --features pio`)
-ESP_IDF_VERSION = "v5.2.1"
 CHRONO_TZ_TIMEZONE_FILTER = "UTC|America/New_York|America/Chicago|America/Los_Angeles|Europe/London|Europe/Berlin|Europe/Paris|Asia/Tokyo|Asia/Shanghai|Asia/Kolkata|Australia/Sydney|America/Sao_Paulo|Africa/Johannesburg|Asia/Dubai|Pacific/Auckland"
 CARGO_WORKSPACE_DIR = { value = "", relative = true }
-RUST_BACKTRACE = "full"
+ESP_LOG = "info"
+
+[unstable]
+build-std = ["alloc", "core"]
+

rust/Cargo.toml

@@ -1,31 +1,17 @@
 [package]
-name = "plant-ctrl2"
-version = "0.1.0"
-authors = ["Empire Phoenix"]
 edition = "2021"
-resolver = "2"
+name = "plant-ctrl2"
-#rust-version = "1.71"
+rust-version = "1.86"
+version = "0.1.0"
 
-[profile.dev]
+# Explicitly configure the binary target and disable building it as a test/bench.
-# Explicitly disable LTO which the Xtensa codegen backend has issues
+[[bin]]
-lto = false
+name = "plant-ctrl2"
-strip = false
+path = "src/main.rs"
-debug = true
+# Prevent IDEs/Cargo from trying to compile a test harness for this no_std binary.
-overflow-checks = true
+test = false
-panic = "abort"
+bench = false
-incremental = true
+doc = false
-opt-level = 2
-
-
-[profile.release]
-# Explicitly disable LTO which the Xtensa codegen backend has issues
-lto = false
-strip = true
-debug = false
-overflow-checks = false
-panic = "abort"
-incremental = true
-opt-level = "z"
 
 [package.metadata.cargo_runner]
 # The string `$TARGET_FILE` will be replaced with the path from cargo.
@@ -40,74 +26,143 @@ command = [
     "partitions.csv"
 ]
 
+[profile.dev]
+lto = true
+strip = false
+debug = false
+overflow-checks = true
+panic = "abort"
+incremental = true
+opt-level = 3
+
+
+[profile.release]
+# Explicitly disable LTO which the Xtensa codegen backend has issues
+lto = true
+strip = true
+debug = false
+overflow-checks = true
+panic = "abort"
+incremental = true
+opt-level = 3
+
 
 [package.metadata.espflash]
 partition_table = "partitions.csv"
 
-[features]
-default = ["std", "esp-idf-svc/native"]
-pio = ["esp-idf-svc/pio"]
-std = ["alloc", "esp-idf-svc/binstart", "esp-idf-svc/std"]
-alloc = ["esp-idf-svc/alloc"]
-nightly = ["esp-idf-svc/nightly"]
-experimental = ["esp-idf-svc/experimental"]
-#embassy = ["esp-idf-svc/embassy-sync", "esp-idf-svc/critical-section", "esp-idf-svc/embassy-time-driver"]
-
 [dependencies]
 #ESP stuff
-embedded-svc = { version = "0.28.1", features = ["experimental"] }
+esp-bootloader-esp-idf = { version = "0.2.0", features = ["esp32c6"] }
-esp-idf-hal = "0.45.2"
+esp-hal = { version = "=1.0.0-rc.0", features = [
-esp-idf-sys = { version = "0.36.1", features = ["binstart", "native"] }
+    "esp32c6",
-esp-idf-svc = { version = "0.51.0", default-features = false }
+    "log-04",
+    "unstable",
+    "rt"
+] }
+log = "0.4.27"
+
+embassy-net = { version = "0.7.0", features = [
+    "dhcpv4",
+    "log",
+    "medium-ethernet",
+    "tcp",
+    "udp",
+] }
+embedded-io = "0.6.1"
+embedded-io-async = "0.6.1"
+esp-alloc = "0.8.0"
+esp-backtrace = { version = "0.17.0", features = [
+    "esp32c6",
+    "exception-handler",
+    "panic-handler",
+    "println",
+    "colors",
+    "custom-halt"
+] }
+esp-println = { version = "0.15.0", features = ["esp32c6", "log-04"] }
+# for more networking protocol support see https://crates.io/crates/edge-net
+embassy-executor = { version = "0.7.0", features = [
+    "log",
+    "task-arena-size-131072"
+] }
+embassy-time = { version = "0.5.0", features = ["log"] }
+esp-hal-embassy = { version = "0.9.0", features = ["esp32c6", "log-04"] }
+esp-storage = { version = "0.7.0", features = ["esp32c6"] }
+
+esp-wifi = { version = "0.15.0", features = [
+    "builtin-scheduler",
+    "esp-alloc",
+    "esp32c6",
+    "log-04",
+    "smoltcp",
+    "wifi",
+] }
+smoltcp = { version = "0.12.0", default-features = false, features = [
+    "alloc",
+    "log",
+    "medium-ethernet",
+    "multicast",
+    "proto-dhcpv4",
+    "proto-dns",
+    "proto-ipv4",
+    "socket-dns",
+    "socket-icmp",
+    "socket-raw",
+    "socket-tcp",
+    "socket-udp",
+] }
+#static_cell = "2.1.1"
 embedded-hal = "1.0.0"
 heapless = { version = "0.8", features = ["serde"] }
-embedded-hal-bus = { version = "0.3.0", features = ["std"] }
+embedded-hal-bus = { version = "0.3.0" }
 
 #Hardware additional driver
-ds18b20 = "0.1.1"
+#ds18b20 = "0.1.1"
-bq34z100 = { version = "0.3.0", features = ["flashstream"] }
+#bq34z100 = { version = "0.3.0", default-features = false }
 one-wire-bus = "0.1.1"
 ds323x = "0.6.0"
 
 #pure code dependencies
-once_cell = "1.19.0"
+#once_cell = "1.19.0"
-anyhow = { version = "1.0.75", features = ["std", "backtrace"] }
+anyhow = { version = "1.0.75", default-features = false }
-strum = { version = "0.27.0", features = ["derive"] }
+#strum = { version = "0.27.0", default-feature = false, features = ["derive"] }
 measurements = "0.11.0"
 
 #json
-serde = { version = "1.0.192", features = ["derive"] }
+serde = { version = "1.0.219", features = ["derive", "alloc"], default-features = false }
-serde_json = "1.0.108"
+serde_json = { version = "1.0.143", default-features = false, features = ["alloc"] }
 
 #timezone
 
-chrono = { version = "0.4.23", default-features = false, features = ["iana-time-zone", "alloc", "serde"] }
+chrono = { version = "0.4.42", default-features = false, features = ["iana-time-zone", "alloc", "serde"] }
-chrono-tz = { version = "0.10.3", default-features = false, features = ["filter-by-regex"] }
+chrono-tz = { version = "0.10.4", default-features = false, features = ["filter-by-regex"] }
 eeprom24x = "0.7.2"
-url = "2.5.3"
+#url = "2.5.3"
 crc = "3.2.1"
-bincode = "2.0.1"
+bincode = { version = "2.0.1", default-features = false, features = ["alloc", "serde"] }
 ringbuffer = "0.15.0"
-text-template = "0.1.0"
 strum_macros = "0.27.0"
-esp-ota = { version = "0.2.2", features = ["log"] }
+#esp-ota = { version = "0.2.2", features = ["log"] }
 unit-enum = "1.4.1"
-pca9535 = { version = "2.0.0", features = ["std"] }
+pca9535 = { version = "2.0.0" }
-ina219 = { version = "0.2.0", features = ["std"] }
+ina219 = { version = "0.2.0" }
 embedded-storage = "=0.3.1"
 ekv = "1.0.0"
 embedded-can = "0.4.1"
+portable-atomic = "1.11.1"
+embassy-sync = { version = "0.7.2", features = ["log"] }
+async-trait = "0.1.89"
+bq34z100 = { version = "0.4.0", default-features = false }
+edge-dhcp = "0.6.0"
+edge-nal = "0.5.0"
+edge-nal-embassy = "0.6.0"
+static_cell = "2.1.1"
+cfg-if = "1.0.3"
+edge-http = { version = "0.6.1", features = ["log"] }
 
 
 [patch.crates-io]
-#esp-idf-hal = { git = "https://github.com/esp-rs/esp-idf-hal.git" }
-#esp-idf-hal = { git = "https://github.com/empirephoenix/esp-idf-hal.git" }
-#esp-idf-sys = { git = "https://github.com/empirephoenix/esp-idf-sys.git" }
-#esp-idf-sys = { git = "https://github.com/esp-rs/esp-idf-sys.git" }
-#esp-idf-svc = { git = "https://github.com/esp-rs/esp-idf-svc.git" }
 #bq34z100 = { path = "../../bq34z100_rust" }
 
 [build-dependencies]
-cc = "=1.1.30"
-embuild = { version = "0.32.0", features = ["espidf"] }
 vergen = { version = "8.2.6", features = ["build", "git", "gitcl"] }

rust/build.rs

@@ -1,8 +1,62 @@
 use std::process::Command;
 
 use vergen::EmitBuilder;
+
+fn linker_be_nice() {
+    let args: Vec<String> = std::env::args().collect();
+    if args.len() > 1 {
+        let kind = &args[1];
+        let what = &args[2];
+
+        match kind.as_str() {
+            "undefined-symbol" => match what.as_str() {
+                "_defmt_timestamp" => {
+                    eprintln!();
+                    eprintln!("💡 `defmt` not found - make sure `defmt.x` is added as a linker script and you have included `use defmt_rtt as _;`");
+                    eprintln!();
+                }
+                "_stack_start" => {
+                    eprintln!();
+                    eprintln!("💡 Is the linker script `linkall.x` missing?");
+                    eprintln!();
+                }
+                "esp_wifi_preempt_enable"
+                | "esp_wifi_preempt_yield_task"
+                | "esp_wifi_preempt_task_create" => {
+                    eprintln!();
+                    eprintln!("💡 `esp-wifi` has no scheduler enabled. Make sure you have the `builtin-scheduler` feature enabled, or that you provide an external scheduler.");
+                    eprintln!();
+                }
+                "embedded_test_linker_file_not_added_to_rustflags" => {
+                    eprintln!();
+                    eprintln!("💡 `embedded-test` not found - make sure `embedded-test.x` is added as a linker script for tests");
+                    eprintln!();
+                }
+                _ => (),
+            },
+            // we don't have anything helpful for "missing-lib" yet
+            _ => {
+                std::process::exit(1);
+            }
+        }
+
+        std::process::exit(0);
+    }
+
+    println!(
+        "cargo:rustc-link-arg=--error-handling-script={}",
+        std::env::current_exe().unwrap().display()
+    );
+}
+
 fn main() {
-    println!("cargo:rerun-if-changed=./src/src_webpack");
+    webpack();
+    linker_be_nice();
+    let _ = EmitBuilder::builder().all_git().all_build().emit();
+}
+
+fn webpack() {
+    //println!("cargo:rerun-if-changed=./src/src_webpack");
     Command::new("rm")
         .arg("./src/webserver/bundle.js")
         .output()
@@ -64,7 +118,4 @@ fn main() {
                 .unwrap();
         }
     }
-
-    embuild::espidf::sysenv::output();
-    let _ = EmitBuilder::builder().all_git().all_build().emit();
 }

rust/espflash.toml

@@ -1,5 +1,6 @@
-partition_table = "partitions.csv"
+format = "EspIdf"
-[connection]
+
-serial = "/dev/ttyACM0"
+[idf_format_args]
+
 [flash]
 size = "16MB"

rust/scratch/v3_hal.rs

@@ -10,14 +10,12 @@ use crate::{
 };
 use anyhow::{bail, Ok, Result};
 use embedded_hal::digital::OutputPin;
-use esp_idf_hal::{
-    gpio::{AnyInputPin, IOPin, InputOutput, PinDriver, Pull},
-    pcnt::{PcntChannel, PcntChannelConfig, PcntControlMode, PcntCountMode, PcntDriver, PinIndex},
-};
-use esp_idf_sys::{gpio_hold_dis, gpio_hold_en};
 use measurements::{Current, Voltage};
 use plant_ctrl2::sipo::ShiftRegister40;
-use std::result::Result::Ok as OkStd;
+use core::result::Result::Ok as OkStd;
+use alloc::string::ToString;
+use alloc::boxed::Box;
+use esp_hall::gpio::Pull;
 
 const PUMP8_BIT: usize = 0;
 const PUMP1_BIT: usize = 1;
@@ -94,7 +92,7 @@ pub(crate) fn create_v3(
     battery_monitor: Box<dyn BatteryInteraction + Send>,
     rtc_module: Box<dyn RTCModuleInteraction + Send>,
 ) -> Result<Box<dyn BoardInteraction<'static> + Send>> {
-    println!("Start v3");
+    log::info!("Start v3");
     let mut clock = PinDriver::input_output(peripherals.gpio15.downgrade())?;
     clock.set_pull(Pull::Floating)?;
     let mut latch = PinDriver::input_output(peripherals.gpio3.downgrade())?;

rust/scratch/v4_hal.rs

@@ -12,12 +12,6 @@ use crate::log::{log, LogMessage};
 use anyhow::bail;
 use embedded_hal::digital::OutputPin;
 use embedded_hal_bus::i2c::MutexDevice;
-use esp_idf_hal::gpio::{AnyInputPin, IOPin, InputOutput, Output, PinDriver, Pull};
-use esp_idf_hal::i2c::I2cDriver;
-use esp_idf_hal::pcnt::{
-    PcntChannel, PcntChannelConfig, PcntControlMode, PcntCountMode, PcntDriver, PinIndex,
-};
-use esp_idf_sys::{gpio_hold_dis, gpio_hold_en};
 use ina219::address::{Address, Pin};
 use ina219::calibration::UnCalibrated;
 use ina219::configuration::{Configuration, OperatingMode};
@@ -27,7 +21,9 @@ use pca9535::{GPIOBank, Pca9535Immediate, StandardExpanderInterface};
 use std::result::Result::Ok as OkStd;
 use embedded_can::Frame;
 use embedded_can::StandardId;
-use esp_idf_hal::can;
+use alloc::string::ToString;
+use alloc::boxed::Box;
+use esp_hal::gpio::Pull;
 
 pub enum Charger<'a> {
     SolarMpptV1 {
@@ -52,7 +48,7 @@ impl Charger<'_> {
                         operating_mode: OperatingMode::PowerDown,
                     })
                     .map_err(|e| {
-                        println!(
+                        log::info!(
                     "Error setting ina mppt configuration during deep sleep preparation{:?}",
                     e
                 );
@@ -133,7 +129,7 @@ pub(crate) fn create_v4(
     battery_monitor: Box<dyn BatteryInteraction + Send>,
     rtc_module: Box<dyn RTCModuleInteraction + Send>,
 ) -> anyhow::Result<Box<dyn BoardInteraction<'static> + Send + 'static>> {
-    println!("Start v4");
+    log::info!("Start v4");
     let mut awake = PinDriver::output(peripherals.gpio21.downgrade())?;
     awake.set_high()?;
 
@@ -163,7 +159,7 @@ pub(crate) fn create_v4(
     let mut sensor_expander = Pca9535Immediate::new(MutexDevice::new(&I2C_DRIVER), 34);
     let sensor = match  sensor_expander.pin_into_output(GPIOBank::Bank0, 0)  {
         Ok(_) => {
-            println!("SensorExpander answered");
+            log::info!("SensorExpander answered");
             //pulse counter version
             let mut signal_counter = PcntDriver::new(
                 peripherals.pcnt0,
@@ -200,7 +196,7 @@ pub(crate) fn create_v4(
             }
         }
         Err(_) => {
-            println!("Can bus mode ");
+            log::info!("Can bus mode ");
             let timing = can::config::Timing::B25K;
             let config = can::config::Config::new().timing(timing);
             let can = can::CanDriver::new(peripherals.can, peripherals.gpio0, peripherals.gpio2, &config).unwrap();
@@ -211,7 +207,7 @@ pub(crate) fn create_v4(
             can.transmit(&tx_frame, 1000).unwrap();
 
             if let Ok(rx_frame) = can.receive(1000) {
-                println!("rx {:}:", rx_frame);
+                log::info!("rx {:}:", rx_frame);
             }
             //can bus version
             SensorImpl::CanBus {
@@ -274,7 +270,7 @@ pub(crate) fn create_v4(
     ) {
         Ok(pump_ina) => Some(pump_ina),
         Err(err) => {
-            println!("Error creating pump ina: {:?}", err);
+            log::info!("Error creating pump ina: {:?}", err);
             None
         }
     };

rust/scratch/v4_sensor.rs

@@ -1,16 +1,17 @@
+use crate::hal::Sensor;
+use crate::log::{log, LogMessage};
+use alloc::string::ToString;
 use embedded_hal_bus::i2c::MutexDevice;
 use esp_idf_hal::can::CanDriver;
 use esp_idf_hal::delay::Delay;
 use esp_idf_hal::i2c::I2cDriver;
 use esp_idf_hal::pcnt::PcntDriver;
 use pca9535::{GPIOBank, Pca9535Immediate, StandardExpanderInterface};
-use crate::hal::Sensor;
-use crate::log::{log, LogMessage};
 
 const REPEAT_MOIST_MEASURE: usize = 10;
 
 pub trait SensorInteraction {
-    fn measure_moisture_hz(&mut self, plant: usize, sensor: Sensor) -> anyhow::Result<f32>;
+    async fn measure_moisture_hz(&mut self, plant: usize, sensor: Sensor) -> anyhow::Result<f32>;
 }
 
 const MS0: u8 = 1_u8;
@@ -21,19 +22,23 @@ const MS4: u8 = 2_u8;
 const SENSOR_ON: u8 = 5_u8;
 
 pub enum SensorImpl<'a> {
-    PulseCounter{
+    PulseCounter {
         signal_counter: PcntDriver<'a>,
         sensor_expander: Pca9535Immediate<MutexDevice<'a, I2cDriver<'a>>>,
     },
-    CanBus{
+    CanBus {
-        can: CanDriver<'a>
+        can: CanDriver<'a>,
-    }
+    },
 }
 
 impl SensorInteraction for SensorImpl<'_> {
     fn measure_moisture_hz(&mut self, plant: usize, sensor: Sensor) -> anyhow::Result<f32> {
         match self {
-            SensorImpl::PulseCounter { signal_counter, sensor_expander, .. } => {
+            SensorImpl::PulseCounter {
+                signal_counter,
+                sensor_expander,
+                ..
+            } => {
                 let mut results = [0_f32; REPEAT_MOIST_MEASURE];
                 for repeat in 0..REPEAT_MOIST_MEASURE {
                     signal_counter.counter_pause()?;
@@ -70,8 +75,7 @@ impl SensorInteraction for SensorImpl<'_> {
                     }
 
                     sensor_expander.pin_set_low(GPIOBank::Bank0, MS4)?;
-                    sensor_expander
+                    sensor_expander.pin_set_high(GPIOBank::Bank0, SENSOR_ON)?;
-                        .pin_set_high(GPIOBank::Bank0, SENSOR_ON)?;
 
                     let delay = Delay::new_default();
                     let measurement = 100; // TODO what is this scaling factor? what is its purpose?
@@ -83,8 +87,7 @@ impl SensorInteraction for SensorImpl<'_> {
                     delay.delay_ms(measurement);
                     signal_counter.counter_pause()?;
                     sensor_expander.pin_set_high(GPIOBank::Bank0, MS4)?;
-                    sensor_expander
+                    sensor_expander.pin_set_low(GPIOBank::Bank0, SENSOR_ON)?;
-                        .pin_set_low(GPIOBank::Bank0, SENSOR_ON)?;
                     sensor_expander.pin_set_low(GPIOBank::Bank0, MS0)?;
                     sensor_expander.pin_set_low(GPIOBank::Bank0, MS1)?;
                     sensor_expander.pin_set_low(GPIOBank::Bank0, MS2)?;

rust/scratch/water.rs

@@ -0,0 +1,176 @@
+use crate::hal::TANK_MULTI_SAMPLE;
+use anyhow::{anyhow, bail};
+use ds18b20::Ds18b20;
+use esp_idf_hal::adc::oneshot::config::AdcChannelConfig;
+use esp_idf_hal::adc::oneshot::{AdcChannelDriver, AdcDriver};
+use esp_idf_hal::adc::{attenuation, Resolution, ADC1};
+use esp_idf_hal::delay::Delay;
+use esp_idf_hal::gpio::{AnyIOPin, AnyInputPin, Gpio5, InputOutput, PinDriver, Pull};
+use esp_idf_hal::pcnt::{
+    PcntChannel, PcntChannelConfig, PcntControlMode, PcntCountMode, PcntDriver, PinIndex, PCNT1,
+};
+use esp_idf_sys::EspError;
+use one_wire_bus::OneWire;
+
+pub struct TankSensor<'a> {
+    // one_wire_bus: OneWire<PinDriver<'a, AnyIOPin, InputOutput>>,
+    // tank_channel: AdcChannelDriver<'a, Gpio5, AdcDriver<'a, ADC1>>,
+    // tank_power: PinDriver<'a, AnyIOPin, InputOutput>,
+    // flow_counter: PcntDriver<'a>,
+    // delay: Delay,
+}
+
+impl<'a> TankSensor<'a> {
+    pub(crate) fn create(
+        // one_wire_pin: AnyIOPin,
+        // adc1: ADC1,
+        // gpio5: Gpio5,
+        // tank_power_pin: AnyIOPin,
+        // flow_sensor_pin: AnyIOPin,
+        // pcnt1: PCNT1,
+    ) -> anyhow::Result<TankSensor<'a>> {
+        // let mut one_wire_pin =
+        //     PinDriver::input_output_od(one_wire_pin).expect("Failed to configure pin");
+        // one_wire_pin
+        //     .set_pull(Pull::Floating)
+        //     .expect("Failed to set pull");
+        //
+        // let adc_config = AdcChannelConfig {
+        //     attenuation: attenuation::DB_11,
+        //     resolution: Resolution::Resolution12Bit,
+        //     calibration: esp_idf_hal::adc::oneshot::config::Calibration::Curve,
+        // };
+        // let tank_driver = AdcDriver::new(adc1).expect("Failed to configure ADC");
+        // let tank_channel = AdcChannelDriver::new(tank_driver, gpio5, &adc_config)
+        //     .expect("Failed to configure ADC channel");
+        //
+        // let mut tank_power =
+        //     PinDriver::input_output(tank_power_pin).expect("Failed to configure pin");
+        // tank_power
+        //     .set_pull(Pull::Floating)
+        //     .expect("Failed to set pull");
+        //
+        // let one_wire_bus =
+        //     OneWire::new(one_wire_pin).expect("OneWire bus did not pull up after release");
+        //
+        // let mut flow_counter = PcntDriver::new(
+        //     pcnt1,
+        //     Some(flow_sensor_pin),
+        //     Option::<AnyInputPin>::None,
+        //     Option::<AnyInputPin>::None,
+        //     Option::<AnyInputPin>::None,
+        // )?;
+        //
+        // flow_counter.channel_config(
+        //     PcntChannel::Channel1,
+        //     PinIndex::Pin0,
+        //     PinIndex::Pin1,
+        //     &PcntChannelConfig {
+        //         lctrl_mode: PcntControlMode::Keep,
+        //         hctrl_mode: PcntControlMode::Keep,
+        //         pos_mode: PcntCountMode::Increment,
+        //         neg_mode: PcntCountMode::Hold,
+        //         counter_h_lim: i16::MAX,
+        //         counter_l_lim: 0,
+        //     },
+        // )?;
+        //
+        // Ok(TankSensor {
+        //     one_wire_bus,
+        //     tank_channel,
+        //     tank_power,
+        //     flow_counter,
+        //     delay: Default::default(),
+        // })
+        bail!("Tank sensor not implemented");
+    }
+
+    pub fn reset_flow_meter(&mut self) {
+        // self.flow_counter.counter_pause().unwrap();
+        // self.flow_counter.counter_clear().unwrap();
+    }
+
+    pub fn start_flow_meter(&mut self) {
+        //self.flow_counter.counter_resume().unwrap();
+    }
+
+    pub fn get_flow_meter_value(&mut self) -> i16 {
+        //self.flow_counter.get_counter_value().unwrap()
+        5_i16
+    }
+
+    pub fn stop_flow_meter(&mut self) -> i16 {
+        //self.flow_counter.counter_pause().unwrap();
+        self.get_flow_meter_value()
+    }
+
+    pub async fn water_temperature_c(&mut self) -> anyhow::Result<f32> {
+        //multisample should be moved to water_temperature_c
+        let mut attempt = 1;
+        let water_temp: Result<f32, anyhow::Error> = loop {
+            let temp = self.single_temperature_c().await;
+            match &temp {
+                Ok(res) => {
+                    log::info!("Water temp is {}", res);
+                    break temp;
+                }
+                Err(err) => {
+                    log::info!("Could not get water temp {} attempt {}", err, attempt)
+                }
+            }
+            if attempt == 5 {
+                break temp;
+            }
+            attempt += 1;
+        };
+        water_temp
+    }
+
+    async fn single_temperature_c(&mut self) -> anyhow::Result<f32> {
+        bail!("err");
+        // self.one_wire_bus
+        //     .reset(&mut self.delay)
+        //     .map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;
+        // let first = self.one_wire_bus.devices(false, &mut self.delay).next();
+        // if first.is_none() {
+        //     bail!("Not found any one wire  Ds18b20");
+        // }
+        // let device_address = first
+        //     .unwrap()
+        //     .map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;
+
+        // let water_temp_sensor = Ds18b20::new::<EspError>(device_address)
+        //     .map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;
+        //
+        // water_temp_sensor
+        //     .start_temp_measurement(&mut self.one_wire_bus, &mut self.delay)
+        //     .map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;
+        // ds18b20::Resolution::Bits12.delay_for_measurement_time(&mut self.delay);
+        // let sensor_data = water_temp_sensor
+        //     .read_data(&mut self.one_wire_bus, &mut self.delay)
+        //     .map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;
+        // if sensor_data.temperature == 85_f32 {
+        //     bail!("Ds18b20 dummy temperature returned");
+        // }
+        //anyhow::Ok(sensor_data.temperature / 10_f32)
+        Ok(13_f32)
+    }
+
+    pub async fn tank_sensor_voltage(&mut self) -> anyhow::Result<f32> {
+        // self.tank_power.set_high()?;
+        // //let stabilize
+        // self.delay.delay_ms(100);
+        //
+        // let mut store = [0_u16; TANK_MULTI_SAMPLE];
+        // for multisample in 0..TANK_MULTI_SAMPLE {
+        //     let value = self.tank_channel.read()?;
+        //     store[multisample] = value;
+        // }
+        // self.tank_power.set_low()?;
+        //
+        // store.sort();
+        // let median_mv = store[6] as f32 / 1000_f32;
+        let median_mv = 10_f32;
+        anyhow::Ok(median_mv)
+    }
+}

rust/src/config.rs

@@ -1,7 +1,8 @@
+use alloc::string::String;
+use core::str::FromStr;
 use crate::hal::PLANT_COUNT;
 use crate::plant_state::PlantWateringMode;
 use serde::{Deserialize, Serialize};
-use std::str::FromStr;
 
 #[derive(Serialize, Deserialize, Clone, Debug, PartialEq)]
 #[serde(default)]

rust/src/hal/battery.rs

@@ -1,22 +1,27 @@
-use anyhow::anyhow;
+use crate::hal::Box;
-use bq34z100::{Bq34Z100Error, Bq34z100g1, Bq34z100g1Driver};
+use alloc::string::String;
-use embedded_hal_bus::i2c::MutexDevice;
+use async_trait::async_trait;
-use esp_idf_hal::delay::Delay;
+use core::error::Error;
-use esp_idf_hal::i2c::{I2cDriver, I2cError};
-use measurements::Temperature;
 use serde::Serialize;
 
+#[async_trait]
 pub trait BatteryInteraction {
-    fn state_charge_percent(&mut self) -> Result<f32, BatteryError>;
+    async fn state_charge_percent(&mut self) -> Result<f32, BatteryError>;
-    fn remaining_milli_ampere_hour(&mut self) -> Result<u16, BatteryError>;
+    async fn remaining_milli_ampere_hour(&mut self) -> Result<u16, BatteryError>;
-    fn max_milli_ampere_hour(&mut self) -> Result<u16, BatteryError>;
+    async fn max_milli_ampere_hour(&mut self) -> Result<u16, BatteryError>;
-    fn design_milli_ampere_hour(&mut self) -> Result<u16, BatteryError>;
+    async fn design_milli_ampere_hour(&mut self) -> Result<u16, BatteryError>;
-    fn voltage_milli_volt(&mut self) -> Result<u16, BatteryError>;
+    async fn voltage_milli_volt(&mut self) -> Result<u16, BatteryError>;
-    fn average_current_milli_ampere(&mut self) -> Result<i16, BatteryError>;
+    async fn average_current_milli_ampere(&mut self) -> Result<i16, BatteryError>;
-    fn cycle_count(&mut self) -> Result<u16, BatteryError>;
+    async fn cycle_count(&mut self) -> Result<u16, BatteryError>;
-    fn state_health_percent(&mut self) -> Result<u16, BatteryError>;
+    async fn state_health_percent(&mut self) -> Result<u16, BatteryError>;
-    fn bat_temperature(&mut self) -> Result<u16, BatteryError>;
+    async fn bat_temperature(&mut self) -> Result<u16, BatteryError>;
-    fn get_battery_state(&mut self) -> Result<BatteryState, BatteryError>;
+    async fn get_battery_state(&mut self) -> Result<BatteryState, BatteryError>;
+}
+
+impl From<BatteryError> for anyhow::Error {
+    fn from(err: BatteryError) -> Self {
+        anyhow::anyhow!(err)
+    }
 }
 
 #[derive(Debug, Serialize)]
@@ -37,13 +42,13 @@ pub enum BatteryError {
     CommunicationError(String),
 }
 
-impl From<Bq34Z100Error<esp_idf_hal::i2c::I2cError>> for BatteryError {
+// impl From<Bq34Z100Error<esp_idf_hal::i2c::I2cError>> for BatteryError {
-    fn from(err: Bq34Z100Error<esp_idf_hal::i2c::I2cError>) -> Self {
+//     fn from(err: Bq34Z100Error<esp_idf_hal::i2c::I2cError>) -> Self {
-        BatteryError::CommunicationError(
+//         BatteryError::CommunicationError(
-            anyhow!("failed to communicate with battery monitor: {:?}", err).to_string(),
+//             anyhow!("failed to communicate with battery monitor: {:?}", err).to_string(),
-        )
+//         )
-    }
+//     }
-}
+// }
 
 #[derive(Debug, Serialize)]
 pub enum BatteryState {
@@ -53,45 +58,45 @@ pub enum BatteryState {
 
 /// If no battery monitor is installed this implementation will be used
 pub struct NoBatteryMonitor {}
-
+#[async_trait]
 impl BatteryInteraction for NoBatteryMonitor {
-    fn state_charge_percent(&mut self) -> Result<f32, BatteryError> {
+    async fn state_charge_percent(&mut self) -> Result<f32, BatteryError> {
         Err(BatteryError::NoBatteryMonitor)
     }
 
-    fn remaining_milli_ampere_hour(&mut self) -> Result<u16, BatteryError> {
+    async fn remaining_milli_ampere_hour(&mut self) -> Result<u16, BatteryError> {
         Err(BatteryError::NoBatteryMonitor)
     }
 
-    fn max_milli_ampere_hour(&mut self) -> Result<u16, BatteryError> {
+    async fn max_milli_ampere_hour(&mut self) -> Result<u16, BatteryError> {
         Err(BatteryError::NoBatteryMonitor)
     }
 
-    fn design_milli_ampere_hour(&mut self) -> Result<u16, BatteryError> {
+    async fn design_milli_ampere_hour(&mut self) -> Result<u16, BatteryError> {
         Err(BatteryError::NoBatteryMonitor)
     }
 
-    fn voltage_milli_volt(&mut self) -> Result<u16, BatteryError> {
+    async fn voltage_milli_volt(&mut self) -> Result<u16, BatteryError> {
         Err(BatteryError::NoBatteryMonitor)
     }
 
-    fn average_current_milli_ampere(&mut self) -> Result<i16, BatteryError> {
+    async fn average_current_milli_ampere(&mut self) -> Result<i16, BatteryError> {
         Err(BatteryError::NoBatteryMonitor)
     }
 
-    fn cycle_count(&mut self) -> Result<u16, BatteryError> {
+    async fn cycle_count(&mut self) -> Result<u16, BatteryError> {
         Err(BatteryError::NoBatteryMonitor)
     }
 
-    fn state_health_percent(&mut self) -> Result<u16, BatteryError> {
+    async fn state_health_percent(&mut self) -> Result<u16, BatteryError> {
         Err(BatteryError::NoBatteryMonitor)
     }
 
-    fn bat_temperature(&mut self) -> Result<u16, BatteryError> {
+    async fn bat_temperature(&mut self) -> Result<u16, BatteryError> {
         Err(BatteryError::NoBatteryMonitor)
     }
 
-    fn get_battery_state(&mut self) -> Result<BatteryState, BatteryError> {
+    async fn get_battery_state(&mut self) -> Result<BatteryState, BatteryError> {
         Ok(BatteryState::Unknown)
     }
 }
@@ -100,115 +105,115 @@ impl BatteryInteraction for NoBatteryMonitor {
 #[allow(dead_code)]
 pub struct WchI2cSlave {}
 
-pub struct BQ34Z100G1<'a> {
+// pub struct BQ34Z100G1<'a> {
-    pub battery_driver: Bq34z100g1Driver<MutexDevice<'a, I2cDriver<'a>>, Delay>,
+//     pub battery_driver: Bq34z100g1Driver<MutexDevice<'a, I2cDriver<'a>>, Delay>,
-}
+// }
-
+//
-impl BatteryInteraction for BQ34Z100G1<'_> {
+// impl BatteryInteraction for BQ34Z100G1<'_> {
-    fn state_charge_percent(&mut self) -> Result<f32, BatteryError> {
+//     fn state_charge_percent(&mut self) -> Result<f32, BatteryError> {
-        Ok(self.battery_driver.state_of_charge().map(f32::from)?)
+//         Ok(self.battery_driver.state_of_charge().map(f32::from)?)
-    }
+//     }
-
+//
-    fn remaining_milli_ampere_hour(&mut self) -> Result<u16, BatteryError> {
+//     fn remaining_milli_ampere_hour(&mut self) -> Result<u16, BatteryError> {
-        Ok(self.battery_driver.remaining_capacity()?)
+//         Ok(self.battery_driver.remaining_capacity()?)
-    }
+//     }
-
+//
-    fn max_milli_ampere_hour(&mut self) -> Result<u16, BatteryError> {
+//     fn max_milli_ampere_hour(&mut self) -> Result<u16, BatteryError> {
-        Ok(self.battery_driver.full_charge_capacity()?)
+//         Ok(self.battery_driver.full_charge_capacity()?)
-    }
+//     }
-
+//
-    fn design_milli_ampere_hour(&mut self) -> Result<u16, BatteryError> {
+//     fn design_milli_ampere_hour(&mut self) -> Result<u16, BatteryError> {
-        Ok(self.battery_driver.design_capacity()?)
+//         Ok(self.battery_driver.design_capacity()?)
-    }
+//     }
-
+//
-    fn voltage_milli_volt(&mut self) -> Result<u16, BatteryError> {
+//     fn voltage_milli_volt(&mut self) -> Result<u16, BatteryError> {
-        Ok(self.battery_driver.voltage()?)
+//         Ok(self.battery_driver.voltage()?)
-    }
+//     }
-
+//
-    fn average_current_milli_ampere(&mut self) -> Result<i16, BatteryError> {
+//     fn average_current_milli_ampere(&mut self) -> Result<i16, BatteryError> {
-        Ok(self.battery_driver.average_current()?)
+//         Ok(self.battery_driver.average_current()?)
-    }
+//     }
-
+//
-    fn cycle_count(&mut self) -> Result<u16, BatteryError> {
+//     fn cycle_count(&mut self) -> Result<u16, BatteryError> {
-        Ok(self.battery_driver.cycle_count()?)
+//         Ok(self.battery_driver.cycle_count()?)
-    }
+//     }
-
+//
-    fn state_health_percent(&mut self) -> Result<u16, BatteryError> {
+//     fn state_health_percent(&mut self) -> Result<u16, BatteryError> {
-        Ok(self.battery_driver.state_of_health()?)
+//         Ok(self.battery_driver.state_of_health()?)
-    }
+//     }
-
+//
-    fn bat_temperature(&mut self) -> Result<u16, BatteryError> {
+//     fn bat_temperature(&mut self) -> Result<u16, BatteryError> {
-        Ok(self.battery_driver.temperature()?)
+//         Ok(self.battery_driver.temperature()?)
-    }
+//     }
-
+//
-    fn get_battery_state(&mut self) -> Result<BatteryState, BatteryError> {
+//     fn get_battery_state(&mut self) -> Result<BatteryState, BatteryError> {
-        Ok(BatteryState::Info(BatteryInfo {
+//         Ok(BatteryState::Info(BatteryInfo {
-            voltage_milli_volt: self.voltage_milli_volt()?,
+//             voltage_milli_volt: self.voltage_milli_volt()?,
-            average_current_milli_ampere: self.average_current_milli_ampere()?,
+//             average_current_milli_ampere: self.average_current_milli_ampere()?,
-            cycle_count: self.cycle_count()?,
+//             cycle_count: self.cycle_count()?,
-            design_milli_ampere_hour: self.design_milli_ampere_hour()?,
+//             design_milli_ampere_hour: self.design_milli_ampere_hour()?,
-            remaining_milli_ampere_hour: self.remaining_milli_ampere_hour()?,
+//             remaining_milli_ampere_hour: self.remaining_milli_ampere_hour()?,
-            state_of_charge: self.state_charge_percent()?,
+//             state_of_charge: self.state_charge_percent()?,
-            state_of_health: self.state_health_percent()?,
+//             state_of_health: self.state_health_percent()?,
-            temperature: self.bat_temperature()?,
+//             temperature: self.bat_temperature()?,
-        }))
+//         }))
-    }
+//     }
-}
+// }
-
+//
-pub fn print_battery_bq34z100(
+// pub fn print_battery_bq34z100(
-    battery_driver: &mut Bq34z100g1Driver<MutexDevice<I2cDriver<'_>>, Delay>,
+//     battery_driver: &mut Bq34z100g1Driver<MutexDevice<I2cDriver<'_>>, Delay>,
-) -> anyhow::Result<(), Bq34Z100Error<I2cError>> {
+// ) -> anyhow::Result<(), Bq34Z100Error<I2cError>> {
-    println!("Try communicating with battery");
+//     log::info!("Try communicating with battery");
-    let fwversion = battery_driver.fw_version().unwrap_or_else(|e| {
+//     let fwversion = battery_driver.fw_version().unwrap_or_else(|e| {
-        println!("Firmware {:?}", e);
+//         log::info!("Firmware {:?}", e);
-        0
+//         0
-    });
+//     });
-    println!("fw version is {}", fwversion);
+//     log::info!("fw version is {}", fwversion);
-
+//
-    let design_capacity = battery_driver.design_capacity().unwrap_or_else(|e| {
+//     let design_capacity = battery_driver.design_capacity().unwrap_or_else(|e| {
-        println!("Design capacity {:?}", e);
+//         log::info!("Design capacity {:?}", e);
-        0
+//         0
-    });
+//     });
-    println!("Design Capacity {}", design_capacity);
+//     log::info!("Design Capacity {}", design_capacity);
-    if design_capacity == 1000 {
+//     if design_capacity == 1000 {
-        println!("Still stock configuring battery, readouts are likely to be wrong!");
+//         log::info!("Still stock configuring battery, readouts are likely to be wrong!");
-    }
+//     }
-
+//
-    let flags = battery_driver.get_flags_decoded()?;
+//     let flags = battery_driver.get_flags_decoded()?;
-    println!("Flags {:?}", flags);
+//     log::info!("Flags {:?}", flags);
-
+//
-    let chem_id = battery_driver.chem_id().unwrap_or_else(|e| {
+//     let chem_id = battery_driver.chem_id().unwrap_or_else(|e| {
-        println!("Chemid {:?}", e);
+//         log::info!("Chemid {:?}", e);
-        0
+//         0
-    });
+//     });
-
+//
-    let bat_temp = battery_driver.internal_temperature().unwrap_or_else(|e| {
+//     let bat_temp = battery_driver.internal_temperature().unwrap_or_else(|e| {
-        println!("Bat Temp {:?}", e);
+//         log::info!("Bat Temp {:?}", e);
-        0
+//         0
-    });
+//     });
-    let temp_c = Temperature::from_kelvin(bat_temp as f64 / 10_f64).as_celsius();
+//     let temp_c = Temperature::from_kelvin(bat_temp as f64 / 10_f64).as_celsius();
-    let voltage = battery_driver.voltage().unwrap_or_else(|e| {
+//     let voltage = battery_driver.voltage().unwrap_or_else(|e| {
-        println!("Bat volt {:?}", e);
+//         log::info!("Bat volt {:?}", e);
-        0
+//         0
-    });
+//     });
-    let current = battery_driver.current().unwrap_or_else(|e| {
+//     let current = battery_driver.current().unwrap_or_else(|e| {
-        println!("Bat current {:?}", e);
+//         log::info!("Bat current {:?}", e);
-        0
+//         0
-    });
+//     });
-    let state = battery_driver.state_of_charge().unwrap_or_else(|e| {
+//     let state = battery_driver.state_of_charge().unwrap_or_else(|e| {
-        println!("Bat Soc {:?}", e);
+//         log::info!("Bat Soc {:?}", e);
-        0
+//         0
-    });
+//     });
-    let charge_voltage = battery_driver.charge_voltage().unwrap_or_else(|e| {
+//     let charge_voltage = battery_driver.charge_voltage().unwrap_or_else(|e| {
-        println!("Bat Charge Volt {:?}", e);
+//         log::info!("Bat Charge Volt {:?}", e);
-        0
+//         0
-    });
+//     });
-    let charge_current = battery_driver.charge_current().unwrap_or_else(|e| {
+//     let charge_current = battery_driver.charge_current().unwrap_or_else(|e| {
-        println!("Bat Charge Current {:?}", e);
+//         log::info!("Bat Charge Current {:?}", e);
-        0
+//         0
-    });
+//     });
-    println!("ChemId: {} Current voltage {} and current {} with charge {}% and temp {} CVolt: {} CCur {}", chem_id, voltage, current, state, temp_c, charge_voltage, charge_current);
+//     log::info!("ChemId: {} Current voltage {} and current {} with charge {}% and temp {} CVolt: {} CCur {}", chem_id, voltage, current, state, temp_c, charge_voltage, charge_current);
-    let _ = battery_driver.unsealed();
+//     let _ = battery_driver.unsealed();
-    let _ = battery_driver.it_enable();
+//     let _ = battery_driver.it_enable();
-    anyhow::Result::Ok(())
+//     anyhow::Result::Ok(())
-}
+// }

rust/src/hal/initial_hal.rs

@@ -1,20 +1,22 @@
 use crate::hal::esp::Esp;
 use crate::hal::rtc::{BackupHeader, RTCModuleInteraction};
-use crate::hal::water::TankSensor;
+use alloc::vec::Vec;
-use crate::hal::{deep_sleep, BoardInteraction, FreePeripherals, Sensor};
+//use crate::hal::water::TankSensor;
+use crate::alloc::boxed::Box;
+use crate::hal::{BoardInteraction, FreePeripherals, Sensor};
 use crate::{
     config::PlantControllerConfig,
     hal::battery::{BatteryInteraction, NoBatteryMonitor},
 };
 use anyhow::{bail, Result};
+use async_trait::async_trait;
 use chrono::{DateTime, Utc};
-use embedded_hal::digital::OutputPin;
+use esp_hal::gpio::{Level, Output, OutputConfig};
-use esp_idf_hal::gpio::{IOPin, Pull};
+use log::info;
-use esp_idf_hal::gpio::{InputOutput, PinDriver};
 use measurements::{Current, Voltage};
 
 pub struct Initial<'a> {
-    pub(crate) general_fault: PinDriver<'a, esp_idf_hal::gpio::AnyIOPin, InputOutput>,
+    pub(crate) general_fault: Output<'a>,
     pub(crate) esp: Esp<'a>,
     pub(crate) config: PlantControllerConfig,
     pub(crate) battery: Box<dyn BatteryInteraction + Send>,
@@ -23,42 +25,36 @@ pub struct Initial<'a> {
 
 struct NoRTC {}
 
+#[async_trait]
 impl RTCModuleInteraction for NoRTC {
-    fn get_backup_info(&mut self) -> Result<BackupHeader> {
+    async fn get_backup_info(&mut self) -> Result<BackupHeader> {
         bail!("Please configure board revision")
     }
 
-    fn get_backup_config(&mut self) -> Result<Vec<u8>> {
+    async fn get_backup_config(&mut self) -> Result<Vec<u8>> {
         bail!("Please configure board revision")
     }
 
-    fn backup_config(&mut self, _bytes: &[u8]) -> Result<()> {
+    async fn backup_config(&mut self, _bytes: &[u8]) -> Result<()> {
         bail!("Please configure board revision")
     }
 
-    fn get_rtc_time(&mut self) -> Result<DateTime<Utc>> {
+    async fn get_rtc_time(&mut self) -> Result<DateTime<Utc>> {
         bail!("Please configure board revision")
     }
 
-    fn set_rtc_time(&mut self, _time: &DateTime<Utc>) -> Result<()> {
+    async fn set_rtc_time(&mut self, _time: &DateTime<Utc>) -> Result<()> {
         bail!("Please configure board revision")
     }
 }
 
 pub(crate) fn create_initial_board(
-    free_pins: FreePeripherals,
+    free_pins: FreePeripherals<'static>,
-    fs_mount_error: bool,
     config: PlantControllerConfig,
     esp: Esp<'static>,
 ) -> Result<Box<dyn BoardInteraction<'static> + Send>> {
-    println!("Start initial");
+    log::info!("Start initial");
-    let mut general_fault = PinDriver::input_output(free_pins.gpio6.downgrade())?;
+    let general_fault = Output::new(free_pins.gpio23, Level::Low, OutputConfig::default());
-    general_fault.set_pull(Pull::Floating)?;
-    general_fault.set_low()?;
-
-    if fs_mount_error {
-        general_fault.set_high()?
-    }
     let v = Initial {
         general_fault,
         config,
@@ -69,10 +65,11 @@ pub(crate) fn create_initial_board(
     Ok(Box::new(v))
 }
 
+#[async_trait]
 impl<'a> BoardInteraction<'a> for Initial<'a> {
-    fn get_tank_sensor(&mut self) -> Option<&mut TankSensor<'a>> {
+    // fn get_tank_sensor(&mut self) -> Option<&mut TankSensor<'a>> {
-        None
+    //     None
-    }
+    // }
 
     fn get_esp(&mut self) -> &mut Esp<'a> {
         &mut self.esp
@@ -94,8 +91,8 @@ impl<'a> BoardInteraction<'a> for Initial<'a> {
         bail!("Please configure board revision")
     }
 
-    fn deep_sleep(&mut self, duration_in_ms: u64) -> ! {
+    async fn deep_sleep(&mut self, duration_in_ms: u64) -> ! {
-        deep_sleep(duration_in_ms)
+        self.esp.deep_sleep(duration_in_ms).await;
     }
     fn is_day(&self) -> bool {
         false
@@ -104,41 +101,42 @@ impl<'a> BoardInteraction<'a> for Initial<'a> {
         bail!("Please configure board revision")
     }
 
-    fn pump(&mut self, _plant: usize, _enable: bool) -> Result<()> {
+    async fn pump(&mut self, _plant: usize, _enable: bool) -> Result<()> {
         bail!("Please configure board revision")
     }
 
-    fn pump_current(&mut self, _plant: usize) -> Result<Current> {
+    async fn pump_current(&mut self, _plant: usize) -> Result<Current> {
         bail!("Please configure board revision")
     }
 
-    fn fault(&mut self, _plant: usize, _enable: bool) -> Result<()> {
+    async fn fault(&mut self, _plant: usize, _enable: bool) -> Result<()> {
         bail!("Please configure board revision")
     }
 
-    fn measure_moisture_hz(&mut self, _plant: usize, _sensor: Sensor) -> Result<f32> {
+    async fn measure_moisture_hz(&mut self, _plant: usize, _sensor: Sensor) -> Result<f32> {
         bail!("Please configure board revision")
     }
 
-    fn general_fault(&mut self, enable: bool) {
+    async fn general_fault(&mut self, enable: bool) {
-        let _ = self.general_fault.set_state(enable.into());
+        self.general_fault.set_level(enable.into());
     }
 
-    fn test(&mut self) -> Result<()> {
+    async fn test(&mut self) -> Result<()> {
         bail!("Please configure board revision")
     }
 
-    fn set_config(&mut self, config: PlantControllerConfig) -> anyhow::Result<()> {
+    async fn set_config(&mut self, config: PlantControllerConfig) -> anyhow::Result<()> {
         self.config = config;
-        self.esp.save_config(&self.config)?;
+        //TODO
+        //        self.esp.save_config(&self.config)?;
         anyhow::Ok(())
     }
 
-    fn get_mptt_voltage(&mut self) -> Result<Voltage> {
+    async fn get_mptt_voltage(&mut self) -> Result<Voltage> {
         bail!("Please configure board revision")
     }
 
-    fn get_mptt_current(&mut self) -> Result<Current> {
+    async fn get_mptt_current(&mut self) -> Result<Current> {
         bail!("Please configure board revision")
     }
 }

rust/src/hal/mod.rs

@@ -1,80 +1,56 @@
 pub(crate) mod battery;
-mod esp;
+pub mod esp;
 mod initial_hal;
 mod rtc;
-mod v3_hal;
+//mod water;
-mod v4_hal;
-mod water;
-mod v4_sensor;
 
-use crate::hal::rtc::{DS3231Module, RTCModuleInteraction};
+use crate::alloc::string::ToString;
-use crate::hal::water::TankSensor;
+use crate::hal::rtc::RTCModuleInteraction;
+use esp_hal::peripherals::Peripherals;
+use esp_hal::peripherals::GPIO23;
+use esp_hal::peripherals::GPIO6;
+
+//use crate::hal::water::TankSensor;
 use crate::{
     config::{BatteryBoardVersion, BoardVersion, PlantControllerConfig},
     hal::{
-        battery::{print_battery_bq34z100, BatteryInteraction, NoBatteryMonitor},
+        battery::{BatteryInteraction, NoBatteryMonitor},
         esp::Esp,
     },
     log::{log, LogMessage},
 };
+use alloc::boxed::Box;
+use alloc::format;
+use alloc::sync::Arc;
 use anyhow::{Ok, Result};
-use battery::BQ34Z100G1;
+use async_trait::async_trait;
-use bq34z100::Bq34z100g1Driver;
+use embassy_executor::Spawner;
-use ds323x::{DateTimeAccess, Ds323x};
+//use battery::BQ34Z100G1;
-use eeprom24x::{Eeprom24x, SlaveAddr, Storage};
+//use bq34z100::Bq34z100g1Driver;
-use embedded_hal_bus::i2c::MutexDevice;
+use embassy_sync::blocking_mutex::raw::CriticalSectionRawMutex;
-use esp_idf_hal::pcnt::PCNT1;
+use esp_bootloader_esp_idf::partitions::{
-use esp_idf_hal::{
+    AppPartitionSubType, DataPartitionSubType, FlashRegion, PartitionEntry,
-    adc::ADC1,
-    delay::Delay,
-    gpio::{
-        Gpio0, Gpio1, Gpio10, Gpio11, Gpio12, Gpio13, Gpio14, Gpio15, Gpio16, Gpio17, Gpio18,
-        Gpio2, Gpio21, Gpio22, Gpio23, Gpio24, Gpio25, Gpio26, Gpio27, Gpio28, Gpio29, Gpio3,
-        Gpio30, Gpio4, Gpio5, Gpio6, Gpio7, Gpio8, IOPin, PinDriver, Pull,
-    },
-    i2c::{APBTickType, I2cConfig, I2cDriver},
-    pcnt::PCNT0,
-    prelude::Peripherals,
-    reset::ResetReason,
-    units::FromValueType,
 };
-use esp_idf_svc::{eventloop::EspSystemEventLoop, nvs::EspDefaultNvsPartition, wifi::EspWifi};
+use esp_hal::clock::CpuClock;
-use esp_idf_sys::{
+use esp_hal::gpio::{Input, InputConfig, Io, Pull};
-    esp_deep_sleep, esp_restart, esp_sleep_enable_ext1_wakeup,
+use esp_println::println;
-    esp_sleep_ext1_wakeup_mode_t_ESP_EXT1_WAKEUP_ANY_LOW,
-};
-use esp_ota::mark_app_valid;
 use measurements::{Current, Voltage};
-use once_cell::sync::Lazy;
+
-use std::result::Result::Ok as OkStd;
+use embassy_sync::mutex::Mutex;
-use std::sync::Mutex;
+use esp_alloc as _;
-use std::time::Duration;
+use esp_backtrace as _;
-use esp_idf_hal::can::CAN;
+use esp_bootloader_esp_idf::ota::Slot;
+use esp_hal::rng::Rng;
+use esp_hal::timer::timg::TimerGroup;
+use esp_storage::FlashStorage;
+use esp_wifi::{init, EspWifiController};
 
 //Only support for 8 right now!
 pub const PLANT_COUNT: usize = 8;
 
 const TANK_MULTI_SAMPLE: usize = 11;
 
-pub static I2C_DRIVER: Lazy<Mutex<I2cDriver<'static>>> = Lazy::new(PlantHal::create_i2c);
+//pub static I2C_DRIVER: LazyLock<Mutex<CriticalSectionRawMutex,I2cDriver<'static>>> = LazyLock::new(PlantHal::create_i2c);
-
-fn deep_sleep(duration_in_ms: u64) -> ! {
-    unsafe {
-        //if we don't do this here, we might just revert newly flashed firmware
-        mark_app_valid();
-        //allow early wakeup by pressing the boot button
-        if duration_in_ms == 0 {
-            esp_restart();
-        } else {
-            //configure gpio 1 to wakeup on low, reused boot button for this
-            esp_sleep_enable_ext1_wakeup(
-                0b10u64,
-                esp_sleep_ext1_wakeup_mode_t_ESP_EXT1_WAKEUP_ANY_LOW,
-            );
-            esp_deep_sleep(duration_in_ms);
-        }
-    };
-}
 
 #[derive(Debug, PartialEq)]
 pub enum Sensor {
@@ -88,171 +64,258 @@ pub struct HAL<'a> {
     pub board_hal: Box<dyn BoardInteraction<'a> + Send>,
 }
 
+#[async_trait]
 pub trait BoardInteraction<'a> {
-    fn get_tank_sensor(&mut self) -> Option<&mut TankSensor<'a>>;
+    //fn get_tank_sensor(&mut self) -> Option<&mut TankSensor>;
     fn get_esp(&mut self) -> &mut Esp<'a>;
     fn get_config(&mut self) -> &PlantControllerConfig;
     fn get_battery_monitor(&mut self) -> &mut Box<dyn BatteryInteraction + Send>;
     fn get_rtc_module(&mut self) -> &mut Box<dyn RTCModuleInteraction + Send>;
     fn set_charge_indicator(&mut self, charging: bool) -> Result<()>;
-    fn deep_sleep(&mut self, duration_in_ms: u64) -> !;
+    async fn deep_sleep(&mut self, duration_in_ms: u64) -> !;
 
     fn is_day(&self) -> bool;
     //should be multsampled
     fn light(&mut self, enable: bool) -> Result<()>;
-    fn pump(&mut self, plant: usize, enable: bool) -> Result<()>;
+    async fn pump(&mut self, plant: usize, enable: bool) -> Result<()>;
-    fn pump_current(&mut self, plant: usize) -> Result<Current>;
+    async fn pump_current(&mut self, plant: usize) -> Result<Current>;
-    fn fault(&mut self, plant: usize, enable: bool) -> Result<()>;
+    async fn fault(&mut self, plant: usize, enable: bool) -> Result<()>;
-    fn measure_moisture_hz(&mut self, plant: usize, sensor: Sensor) -> Result<f32>;
+    async fn measure_moisture_hz(&mut self, plant: usize, sensor: Sensor) -> Result<f32>;
-    fn general_fault(&mut self, enable: bool);
+    async fn general_fault(&mut self, enable: bool);
-    fn test(&mut self) -> Result<()>;
+    async fn test(&mut self) -> Result<()>;
-    fn set_config(&mut self, config: PlantControllerConfig) -> Result<()>;
+    async fn set_config(&mut self, config: PlantControllerConfig) -> Result<()>;
-    fn get_mptt_voltage(&mut self) -> anyhow::Result<Voltage>;
+    async fn get_mptt_voltage(&mut self) -> anyhow::Result<Voltage>;
-    fn get_mptt_current(&mut self) -> anyhow::Result<Current>;
+    async fn get_mptt_current(&mut self) -> anyhow::Result<Current>;
 }
 
 impl dyn BoardInteraction<'_> {
     //the counter is just some arbitrary number that increases whenever some progress was made, try to keep the updates < 10 per second for ux reasons
-    fn _progress(&mut self, counter: u32) {
+    async fn _progress(&mut self, counter: u32) {
         let even = counter % 2 == 0;
         let current = counter / (PLANT_COUNT as u32);
         for led in 0..PLANT_COUNT {
-            self.fault(led, current == led as u32).unwrap();
+            self.fault(led, current == led as u32).await.unwrap();
         }
         let _ = self.general_fault(even.into());
     }
 }
 
 #[allow(dead_code)]
-pub struct FreePeripherals {
+pub struct FreePeripherals<'a> {
-    pub gpio0: Gpio0,
+    // pub gpio0: Gpio0,
-    pub gpio1: Gpio1,
+    // pub gpio1: Gpio1,
-    pub gpio2: Gpio2,
+    // pub gpio2: Gpio2,
-    pub gpio3: Gpio3,
+    // pub gpio3: Gpio3,
-    pub gpio4: Gpio4,
+    // pub gpio4: Gpio4,
-    pub gpio5: Gpio5,
+    // pub gpio5: Gpio5,
-    pub gpio6: Gpio6,
+    pub gpio6: GPIO6<'a>,
-    pub gpio7: Gpio7,
+    // pub gpio7: Gpio7,
-    pub gpio8: Gpio8,
+    // pub gpio8: Gpio8,
-    //config button here
+    // //config button here
-    pub gpio10: Gpio10,
+    // pub gpio10: Gpio10,
-    pub gpio11: Gpio11,
+    // pub gpio11: Gpio11,
-    pub gpio12: Gpio12,
+    // pub gpio12: Gpio12,
-    pub gpio13: Gpio13,
+    // pub gpio13: Gpio13,
-    pub gpio14: Gpio14,
+    // pub gpio14: Gpio14,
-    pub gpio15: Gpio15,
+    // pub gpio15: Gpio15,
-    pub gpio16: Gpio16,
+    // pub gpio16: Gpio16,
-    pub gpio17: Gpio17,
+    // pub gpio17: Gpio17,
-    pub gpio18: Gpio18,
+    // pub gpio18: Gpio18,
-    //i2c here
+    // //i2c here
-    pub gpio21: Gpio21,
+    // pub gpio21: Gpio21,
-    pub gpio22: Gpio22,
+    // pub gpio22: Gpio22,
-    pub gpio23: Gpio23,
+    pub gpio23: GPIO23<'a>,
-    pub gpio24: Gpio24,
+    // pub gpio24: Gpio24,
-    pub gpio25: Gpio25,
+    // pub gpio25: Gpio25,
-    pub gpio26: Gpio26,
+    // pub gpio26: Gpio26,
-    pub gpio27: Gpio27,
+    // pub gpio27: Gpio27,
-    pub gpio28: Gpio28,
+    // pub gpio28: Gpio28,
-    pub gpio29: Gpio29,
+    // pub gpio29: Gpio29,
-    pub gpio30: Gpio30,
+    // pub gpio30: Gpio30,
-    pub pcnt0: PCNT0,
+    // pub pcnt0: PCNT0,
-    pub pcnt1: PCNT1,
+    // pub pcnt1: PCNT1,
-    pub adc1: ADC1,
+    // pub adc1: ADC1,
-    pub can: CAN,
+    // pub can: CAN,
 }
 
+macro_rules! mk_static {
+    ($t:ty,$val:expr) => {{
+        static STATIC_CELL: static_cell::StaticCell<$t> = static_cell::StaticCell::new();
+        #[deny(unused_attributes)]
+        let x = STATIC_CELL.uninit().write(($val));
+        x
+    }};
+}
+
+const GW_IP_ADDR_ENV: Option<&'static str> = option_env!("GATEWAY_IP");
+
 impl PlantHal {
-    fn create_i2c() -> Mutex<I2cDriver<'static>> {
+    // fn create_i2c() -> Mutex<CriticalSectionRawMutex, I2cDriver<'static>> {
-        let peripherals = unsafe { Peripherals::new() };
+    //     let peripherals = unsafe { Peripherals::new() };
+    //
+    //     let config = I2cConfig::new()
+    //         .scl_enable_pullup(true)
+    //         .sda_enable_pullup(true)
+    //         .baudrate(100_u32.kHz().into())
+    //         .timeout(APBTickType::from(Duration::from_millis(100)));
+    //
+    //     let i2c = peripherals.i2c0;
+    //     let scl = peripherals.pins.gpio19.downgrade();
+    //     let sda = peripherals.pins.gpio20.downgrade();
+    //
+    //     Mutex::new(I2cDriver::new(i2c, sda, scl, &config).unwrap())
+    // }
 
-        let config = I2cConfig::new()
+    pub async fn create(spawner: Spawner) -> Result<Mutex<CriticalSectionRawMutex, HAL<'static>>> {
-            .scl_enable_pullup(true)
+        let config = esp_hal::Config::default().with_cpu_clock(CpuClock::max());
-            .sda_enable_pullup(true)
+        let peripherals: Peripherals = esp_hal::init(config);
-            .baudrate(100_u32.kHz().into())
-            .timeout(APBTickType::from(Duration::from_millis(100)));
 
-        let i2c = peripherals.i2c0;
+        esp_alloc::heap_allocator!(size: 64 * 1024);
-        let scl = peripherals.pins.gpio19.downgrade();
+        let systimer = SystemTimer::new(peripherals.SYSTIMER);
-        let sda = peripherals.pins.gpio20.downgrade();
 
-        Mutex::new(I2cDriver::new(i2c, sda, scl, &config).unwrap())
+        let boot_button = Input::new(
+            peripherals.GPIO9,
+            InputConfig::default().with_pull(Pull::None),
+        );
+
+        let rng = Rng::new(peripherals.RNG);
+        let timg0 = TimerGroup::new(peripherals.TIMG0);
+        let esp_wifi_ctrl = &*mk_static!(
+            EspWifiController<'static>,
+            init(timg0.timer0, rng.clone()).unwrap()
+        );
+
+        let (controller, interfaces) =
+            esp_wifi::wifi::new(&esp_wifi_ctrl, peripherals.WIFI).unwrap();
+
+        use esp_hal::timer::systimer::SystemTimer;
+        esp_hal_embassy::init(systimer.alarm0);
+
+        //let mut adc1 = Adc::new(peripherals.ADC1, adc1_config);
+        //
+        let free_pins = FreePeripherals {
+            //     can: peripherals.can,
+            //     adc1: peripherals.adc1,
+            //     pcnt0: peripherals.pcnt0,
+            //     pcnt1: peripherals.pcnt1,
+            //     gpio0: peripherals.pins.gpio0,
+            //     gpio1: peripherals.pins.gpio1,
+            //     gpio2: peripherals.pins.gpio2,
+            //     gpio3: peripherals.pins.gpio3,
+            //     gpio4: peripherals.pins.gpio4,
+            //     gpio5: peripherals.pins.gpio5,
+            gpio6: peripherals.GPIO6,
+            //     gpio7: peripherals.pins.gpio7,
+            //     gpio8: peripherals.pins.gpio8,
+            //     gpio10: peripherals.pins.gpio10,
+            //     gpio11: peripherals.pins.gpio11,
+            //     gpio12: peripherals.pins.gpio12,
+            //     gpio13: peripherals.pins.gpio13,
+            //     gpio14: peripherals.pins.gpio14,
+            //     gpio15: peripherals.pins.gpio15,
+            //     gpio16: peripherals.pins.gpio16,
+            //     gpio17: peripherals.pins.gpio17,
+            //     gpio18: peripherals.pins.gpio18,
+            //     gpio21: peripherals.pins.gpio21,
+            //     gpio22: peripherals.pins.gpio22,
+            gpio23: peripherals.GPIO23,
+            //     gpio24: peripherals.pins.gpio24,
+            //     gpio25: peripherals.pins.gpio25,
+            //     gpio26: peripherals.pins.gpio26,
+            //     gpio27: peripherals.pins.gpio27,
+            //     gpio28: peripherals.pins.gpio28,
+            //     gpio29: peripherals.pins.gpio29,
+            //     gpio30: peripherals.pins.gpio30,
+        };
+        //
+
+        let tablebuffer: [u8; esp_bootloader_esp_idf::partitions::PARTITION_TABLE_MAX_LEN] =
+            [0u8; esp_bootloader_esp_idf::partitions::PARTITION_TABLE_MAX_LEN];
+        let tablebuffer = mk_static!(
+            [u8; esp_bootloader_esp_idf::partitions::PARTITION_TABLE_MAX_LEN],
+            tablebuffer
+        );
+        let storage_ota = mk_static!(FlashStorage, FlashStorage::new());
+        let pt =
+            esp_bootloader_esp_idf::partitions::read_partition_table(storage_ota, tablebuffer)?;
+
+        // List all partitions - this is just FYI
+        for i in 0..pt.len() {
+            println!("{:?}", pt.get_partition(i));
         }
 
-    pub fn create() -> Result<Mutex<HAL<'static>>> {
+        let ota_data = pt
-        let peripherals = Peripherals::take()?;
+            .find_partition(esp_bootloader_esp_idf::partitions::PartitionType::Data(
-        let sys_loop = EspSystemEventLoop::take()?;
+                DataPartitionSubType::Ota,
-        let nvs = EspDefaultNvsPartition::take()?;
+            ))?
-        let wifi_driver = EspWifi::new(peripherals.modem, sys_loop, Some(nvs))?;
+            .unwrap();
 
-        let mut boot_button = PinDriver::input(peripherals.pins.gpio9.downgrade())?;
+        let ota_data = mk_static!(PartitionEntry, ota_data);
-        boot_button.set_pull(Pull::Floating)?;
 
-        let free_pins = FreePeripherals {
+        let ota_data = ota_data.as_embedded_storage(storage_ota);
-            can: peripherals.can,
+        let ota_data = mk_static!(FlashRegion<FlashStorage>, ota_data);
-            adc1: peripherals.adc1,
+
-            pcnt0: peripherals.pcnt0,
+        let mut ota = esp_bootloader_esp_idf::ota::Ota::new(ota_data)?;
-            pcnt1: peripherals.pcnt1,
+
-            gpio0: peripherals.pins.gpio0,
+        let ota_partition = match ota.current_slot()? {
-            gpio1: peripherals.pins.gpio1,
+            Slot::None => {
-            gpio2: peripherals.pins.gpio2,
+                panic!("No OTA slot found");
-            gpio3: peripherals.pins.gpio3,
+            }
-            gpio4: peripherals.pins.gpio4,
+            Slot::Slot0 => pt
-            gpio5: peripherals.pins.gpio5,
+                .find_partition(esp_bootloader_esp_idf::partitions::PartitionType::App(
-            gpio6: peripherals.pins.gpio6,
+                    AppPartitionSubType::Ota0,
-            gpio7: peripherals.pins.gpio7,
+                ))?
-            gpio8: peripherals.pins.gpio8,
+                .unwrap(),
-            gpio10: peripherals.pins.gpio10,
+            Slot::Slot1 => pt
-            gpio11: peripherals.pins.gpio11,
+                .find_partition(esp_bootloader_esp_idf::partitions::PartitionType::App(
-            gpio12: peripherals.pins.gpio12,
+                    AppPartitionSubType::Ota1,
-            gpio13: peripherals.pins.gpio13,
+                ))?
-            gpio14: peripherals.pins.gpio14,
+                .unwrap(),
-            gpio15: peripherals.pins.gpio15,
-            gpio16: peripherals.pins.gpio16,
-            gpio17: peripherals.pins.gpio17,
-            gpio18: peripherals.pins.gpio18,
-            gpio21: peripherals.pins.gpio21,
-            gpio22: peripherals.pins.gpio22,
-            gpio23: peripherals.pins.gpio23,
-            gpio24: peripherals.pins.gpio24,
-            gpio25: peripherals.pins.gpio25,
-            gpio26: peripherals.pins.gpio26,
-            gpio27: peripherals.pins.gpio27,
-            gpio28: peripherals.pins.gpio28,
-            gpio29: peripherals.pins.gpio29,
-            gpio30: peripherals.pins.gpio30,
         };
 
+        let ota_next = mk_static!(PartitionEntry, ota_partition);
+        let storage_ota_next = mk_static!(FlashStorage, FlashStorage::new());
+        let ota_next = mk_static!(
+            FlashRegion<FlashStorage>,
+            ota_next.as_embedded_storage(storage_ota_next)
+        );
+
         let mut esp = Esp {
-            mqtt_client: None,
+            rng,
-            wifi_driver,
+            controller: Arc::new(Mutex::new(controller)),
+            interfaces: Some(interfaces),
             boot_button,
-            delay: Delay::new(1000),
+            mqtt_client: None,
+            ota,
+            ota_next,
+            wall_clock_offset: 0,
         };
 
         //init,reset rtc memory depending on cause
         let mut init_rtc_store: bool = false;
         let mut to_config_mode: bool = false;
-        let reasons = ResetReason::get();
+        let reasons = "";
-        match reasons {
+        // let reasons = ResetReason::get();
-            ResetReason::Software => {}
+        // match reasons {
-            ResetReason::ExternalPin => {}
+        //     ResetReason::Software => {}
-            ResetReason::Watchdog => {
+        //     ResetReason::ExternalPin => {}
-                init_rtc_store = true;
+        //     ResetReason::Watchdog => {
-            }
+        //         init_rtc_store = true;
-            ResetReason::Sdio => init_rtc_store = true,
+        //     }
-            ResetReason::Panic => init_rtc_store = true,
+        //     ResetReason::Sdio => init_rtc_store = true,
-            ResetReason::InterruptWatchdog => init_rtc_store = true,
+        //     ResetReason::Panic => init_rtc_store = true,
-            ResetReason::PowerOn => init_rtc_store = true,
+        //     ResetReason::InterruptWatchdog => init_rtc_store = true,
-            ResetReason::Unknown => init_rtc_store = true,
+        //     ResetReason::PowerOn => init_rtc_store = true,
-            ResetReason::Brownout => init_rtc_store = true,
+        //     ResetReason::Unknown => init_rtc_store = true,
-            ResetReason::TaskWatchdog => init_rtc_store = true,
+        //     ResetReason::Brownout => init_rtc_store = true,
-            ResetReason::DeepSleep => {}
+        //     ResetReason::TaskWatchdog => init_rtc_store = true,
-            ResetReason::USBPeripheral => {
+        //     ResetReason::DeepSleep => {}
-                init_rtc_store = true;
+        //     ResetReason::USBPeripheral => {
-                to_config_mode = true;
+        //         init_rtc_store = true;
-            }
+        //         to_config_mode = true;
-            ResetReason::JTAG => init_rtc_store = true,
+        //     }
-        };
+        //     ResetReason::JTAG => init_rtc_store = true,
+        // };
         log(
             LogMessage::ResetReason,
             init_rtc_store as u32,
@@ -266,71 +329,77 @@ impl PlantHal {
 
         let config = esp.load_config();
 
-        println!("Init rtc driver");
+        log::info!("Init rtc driver");
-        let mut rtc = Ds323x::new_ds3231(MutexDevice::new(&I2C_DRIVER));
+        // let mut rtc = Ds323x::new_ds3231(MutexDevice::new(&I2C_DRIVER));
+        //
+        // log::info!("Init rtc eeprom driver");
+        // let eeprom = {
+        //     Eeprom24x::new_24x32(
+        //         MutexDevice::new(&I2C_DRIVER),
+        //         SlaveAddr::Alternative(true, true, true),
+        //     )
+        // };
+        // let rtc_time = rtc.datetime();
+        // match rtc_time {
+        //     OkStd(tt) => {
+        //         log::info!("Rtc Module reports time at UTC {}", tt);
+        //     }
+        //     Err(err) => {
+        //         log::info!("Rtc Module could not be read {:?}", err);
+        //     }
+        // }
 
-        println!("Init rtc eeprom driver");
+        // let storage = Storage::new(eeprom, Delay::new(1000));
-        let eeprom = {
+        //let rtc_module: Box<dyn RTCModuleInteraction + Send> =
-            Eeprom24x::new_24x32(
+        //    Box::new(DS3231Module { rtc, storage }) as Box<dyn RTCModuleInteraction + Send>;
-                MutexDevice::new(&I2C_DRIVER),
-                SlaveAddr::Alternative(true, true, true),
-            )
-        };
-        let rtc_time = rtc.datetime();
-        match rtc_time {
-            OkStd(tt) => {
-                println!("Rtc Module reports time at UTC {}", tt);
-            }
-            Err(err) => {
-                println!("Rtc Module could not be read {:?}", err);
-            }
-        }
-
-        let storage = Storage::new(eeprom, Delay::new(1000));
-        let rtc_module: Box<dyn RTCModuleInteraction + Send> =
-            Box::new(DS3231Module { rtc, storage }) as Box<dyn RTCModuleInteraction + Send>;
 
         let hal = match config {
             Result::Ok(config) => {
                 let battery_interaction: Box<dyn BatteryInteraction + Send> =
                     match config.hardware.battery {
                         BatteryBoardVersion::Disabled => Box::new(NoBatteryMonitor {}),
-                        BatteryBoardVersion::BQ34Z100G1 => {
+                        // BatteryBoardVersion::BQ34Z100G1 => {
-                            let mut battery_driver = Bq34z100g1Driver {
+                        //     let mut battery_driver = Bq34z100g1Driver {
-                                i2c: MutexDevice::new(&I2C_DRIVER),
+                        //         i2c: MutexDevice::new(&I2C_DRIVER),
-                                delay: Delay::new(0),
+                        //         delay: Delay::new(0),
-                                flash_block_data: [0; 32],
+                        //         flash_block_data: [0; 32],
-                            };
+                        //     };
-                            let status = print_battery_bq34z100(&mut battery_driver);
+                        //     let status = print_battery_bq34z100(&mut battery_driver);
-                            match status {
+                        //     match status {
-                                OkStd(_) => {}
+                        //         Ok(_) => {}
-                                Err(err) => {
+                        //         Err(err) => {
-                                    log(
+                        //             log(
-                                        LogMessage::BatteryCommunicationError,
+                        //                 LogMessage::BatteryCommunicationError,
-                                        0u32,
+                        //                 0u32,
-                                        0,
+                        //                 0,
-                                        "",
+                        //                 "",
-                                        &format!("{err:?})"),
+                        //                 &format!("{err:?})"),
-                                    );
+                        //             );
-                                }
+                        //         }
-                            }
+                        //     }
-                            Box::new(BQ34Z100G1 { battery_driver })
+                        //     Box::new(BQ34Z100G1 { battery_driver })
-                        }
+                        // }
                         BatteryBoardVersion::WchI2cSlave => {
                             // TODO use correct implementation once availible
                             Box::new(NoBatteryMonitor {})
                         }
+                        _ => {
+                            todo!()
+                        }
                     };
 
                 let board_hal: Box<dyn BoardInteraction + Send> = match config.hardware.board {
                     BoardVersion::INITIAL => {
-                        initial_hal::create_initial_board(free_pins, fs_mount_error, config, esp)?
+                        initial_hal::create_initial_board(free_pins, config, esp)?
                     }
-                    BoardVersion::V3 => {
+                    // BoardVersion::V3 => {
-                        v3_hal::create_v3(free_pins, esp, config, battery_interaction, rtc_module)?
+                    //     v3_hal::create_v3(free_pins, esp, config, battery_interaction, rtc_module)?
-                    }
+                    // }
-                    BoardVersion::V4 => {
+                    // BoardVersion::V4 => {
-                        v4_hal::create_v4(free_pins, esp, config, battery_interaction, rtc_module)?
+                    //     v4_hal::create_v4(free_pins, esp, config, battery_interaction, rtc_module)?
+                    // }
+                    _ => {
+                        todo!()
                     }
                 };
 
@@ -347,7 +416,6 @@ impl PlantHal {
                 HAL {
                     board_hal: initial_hal::create_initial_board(
                         free_pins,
-                        fs_mount_error,
                         PlantControllerConfig::default(),
                         esp,
                     )?,

rust/src/hal/rtc.rs

@@ -1,132 +1,138 @@
-use anyhow::{anyhow, bail};
+use crate::hal::Box;
-use bincode::config::Configuration;
+use alloc::vec::Vec;
-use bincode::{config, Decode, Encode};
+use async_trait::async_trait;
 use chrono::{DateTime, Utc};
-use ds323x::{DateTimeAccess, Ds323x};
-use eeprom24x::addr_size::TwoBytes;
-use eeprom24x::page_size::B32;
-use eeprom24x::unique_serial::No;
-use eeprom24x::Storage;
-use embedded_hal_bus::i2c::MutexDevice;
-use embedded_storage::ReadStorage as embedded_storage_ReadStorage;
-use embedded_storage::Storage as embedded_storage_Storage;
-use esp_idf_hal::delay::Delay;
-use esp_idf_hal::i2c::I2cDriver;
-use serde::{Deserialize, Serialize};
-use std::result::Result::Ok as OkStd;
-
-const X25: crc::Crc<u16> = crc::Crc::<u16>::new(&crc::CRC_16_IBM_SDLC);
-const CONFIG: Configuration = config::standard();
 
+// use crate::hal::Box;
+// use alloc::vec::Vec;
+// use anyhow::{anyhow, bail};
+// use async_trait::async_trait;
+// use bincode::config::Configuration;
+// use bincode::{config, Decode, Encode};
+// use chrono::{DateTime, Utc};
+// use ds323x::{DateTimeAccess, Ds323x};
+// use eeprom24x::addr_size::TwoBytes;
+// use eeprom24x::page_size::B32;
+// use eeprom24x::unique_serial::No;
+// use eeprom24x::Storage;
+// use embedded_storage::ReadStorage as embedded_storage_ReadStorage;
+// use embedded_storage::Storage as embedded_storage_Storage;
+// use serde::{Deserialize, Serialize};
+//
+// const X25: crc::Crc<u16> = crc::Crc::<u16>::new(&crc::CRC_16_IBM_SDLC);
+// const CONFIG: Configuration = config::standard();
+//
+#[async_trait]
 pub trait RTCModuleInteraction {
-    fn get_backup_info(&mut self) -> anyhow::Result<BackupHeader>;
+     async fn get_backup_info(&mut self) -> anyhow::Result<BackupHeader>;
-    fn get_backup_config(&mut self) -> anyhow::Result<Vec<u8>>;
+     async fn get_backup_config(&mut self) -> anyhow::Result<Vec<u8>>;
-    fn backup_config(&mut self, bytes: &[u8]) -> anyhow::Result<()>;
+     async fn backup_config(&mut self, bytes: &[u8]) -> anyhow::Result<()>;
-    fn get_rtc_time(&mut self) -> anyhow::Result<DateTime<Utc>>;
+     async fn get_rtc_time(&mut self) -> anyhow::Result<DateTime<Utc>>;
-    fn set_rtc_time(&mut self, time: &DateTime<Utc>) -> anyhow::Result<()>;
+     async fn set_rtc_time(&mut self, time: &DateTime<Utc>) -> anyhow::Result<()>;
 }
-
+//
-const BACKUP_HEADER_MAX_SIZE: usize = 64;
+// const BACKUP_HEADER_MAX_SIZE: usize = 64;
-#[derive(Serialize, Deserialize, PartialEq, Debug, Default, Encode, Decode)]
+// #[derive(Serialize, Deserialize, PartialEq, Debug, Default, Encode, Decode)]
 pub struct BackupHeader {
     pub timestamp: i64,
     crc16: u16,
     pub size: u16,
 }
-
+//
-pub struct DS3231Module<'a> {
+// pub struct DS3231Module<'a> {
-    pub(crate) rtc:
+//     pub(crate) rtc:
-        Ds323x<ds323x::interface::I2cInterface<MutexDevice<'a, I2cDriver<'a>>>, ds323x::ic::DS3231>,
+//         Ds323x<ds323x::interface::I2cInterface<MutexDevice<'a, I2cDriver<'a>>>, ds323x::ic::DS3231>,
-
+//
-    pub(crate) storage: Storage<MutexDevice<'a, I2cDriver<'a>>, B32, TwoBytes, No, Delay>,
+//     pub(crate) storage: Storage<MutexDevice<'a, I2cDriver<'a>>, B32, TwoBytes, No, Delay>,
-}
+// }
-
+//
-impl RTCModuleInteraction for DS3231Module<'_> {
+// impl RTCModuleInteraction for DS3231Module<'_> {
-    fn get_backup_info(&mut self) -> anyhow::Result<BackupHeader> {
+//     fn get_backup_info(&mut self) -> anyhow::Result<BackupHeader> {
-        let mut header_page_buffer = [0_u8; BACKUP_HEADER_MAX_SIZE];
+//         let mut header_page_buffer = [0_u8; BACKUP_HEADER_MAX_SIZE];
-
+//
-        self.storage
+//         self.storage
-            .read(0, &mut header_page_buffer)
+//             .read(0, &mut header_page_buffer)
-            .map_err(|err| anyhow!("Error reading eeprom header {:?}", err))?;
+//             .map_err(|err| anyhow!("Error reading eeprom header {:?}", err))?;
-
+//
-        let (header, len): (BackupHeader, usize) =
+//         let (header, len): (BackupHeader, usize) =
-            bincode::decode_from_slice(&header_page_buffer[..], CONFIG)?;
+//             bincode::decode_from_slice(&header_page_buffer[..], CONFIG)?;
-
+//
-        println!("Raw header is {:?} with size {}", header_page_buffer, len);
+//         log::info!("Raw header is {:?} with size {}", header_page_buffer, len);
-        anyhow::Ok(header)
+//         anyhow::Ok(header)
-    }
+//     }
-
+//
-    fn get_backup_config(&mut self) -> anyhow::Result<Vec<u8>> {
+//     fn get_backup_config(&mut self) -> anyhow::Result<Vec<u8>> {
-        let mut header_page_buffer = [0_u8; BACKUP_HEADER_MAX_SIZE];
+//         let mut header_page_buffer = [0_u8; BACKUP_HEADER_MAX_SIZE];
-
+//
-        self.storage
+//         self.storage
-            .read(0, &mut header_page_buffer)
+//             .read(0, &mut header_page_buffer)
-            .map_err(|err| anyhow!("Error reading eeprom header {:?}", err))?;
+//             .map_err(|err| anyhow!("Error reading eeprom header {:?}", err))?;
-        let (header, _header_size): (BackupHeader, usize) =
+//         let (header, _header_size): (BackupHeader, usize) =
-            bincode::decode_from_slice(&header_page_buffer[..], CONFIG)?;
+//             bincode::decode_from_slice(&header_page_buffer[..], CONFIG)?;
-
+//
-        let mut data_buffer = vec![0_u8; header.size as usize];
+//         let mut data_buffer = vec![0_u8; header.size as usize];
-        //read the specified number of bytes after the header
+//         //read the specified number of bytes after the header
-        self.storage
+//         self.storage
-            .read(BACKUP_HEADER_MAX_SIZE as u32, &mut data_buffer)
+//             .read(BACKUP_HEADER_MAX_SIZE as u32, &mut data_buffer)
-            .map_err(|err| anyhow!("Error reading eeprom data {:?}", err))?;
+//             .map_err(|err| anyhow!("Error reading eeprom data {:?}", err))?;
-
+//
-        let checksum = X25.checksum(&data_buffer);
+//         let checksum = X25.checksum(&data_buffer);
-        if checksum != header.crc16 {
+//         if checksum != header.crc16 {
-            bail!(
+//             bail!(
-                "Invalid checksum, got {} but expected {}",
+//                 "Invalid checksum, got {} but expected {}",
-                checksum,
+//                 checksum,
-                header.crc16
+//                 header.crc16
-            );
+//             );
-        }
+//         }
-
+//
-        anyhow::Ok(data_buffer)
+//         anyhow::Ok(data_buffer)
-    }
+//     }
-    fn backup_config(&mut self, bytes: &[u8]) -> anyhow::Result<()> {
+//     fn backup_config(&mut self, bytes: &[u8]) -> anyhow::Result<()> {
-        let mut header_page_buffer = [0_u8; BACKUP_HEADER_MAX_SIZE];
+//         let mut header_page_buffer = [0_u8; BACKUP_HEADER_MAX_SIZE];
-
+//
-        let time = self.get_rtc_time()?.timestamp_millis();
+//         let time = self.get_rtc_time()?.timestamp_millis();
-        let checksum = X25.checksum(bytes);
+//         let checksum = X25.checksum(bytes);
-
+//
-        let header = BackupHeader {
+//         let header = BackupHeader {
-            crc16: checksum,
+//             crc16: checksum,
-            timestamp: time,
+//             timestamp: time,
-            size: bytes.len() as u16,
+//             size: bytes.len() as u16,
-        };
+//         };
-        let config = config::standard();
+//         let config = config::standard();
-        let encoded = bincode::encode_into_slice(&header, &mut header_page_buffer, config)?;
+//         let encoded = bincode::encode_into_slice(&header, &mut header_page_buffer, config)?;
-        println!(
+//         log::info!(
-            "Raw header is {:?} with size {}",
+//             "Raw header is {:?} with size {}",
-            header_page_buffer, encoded
+//             header_page_buffer,
-        );
+//             encoded
-        self.storage
+//         );
-            .write(0, &header_page_buffer)
+//         self.storage
-            .map_err(|err| anyhow!("Error writing header {:?}", err))?;
+//             .write(0, &header_page_buffer)
-
+//             .map_err(|err| anyhow!("Error writing header {:?}", err))?;
-        //write rest after the header
+//
-        self.storage
+//         //write rest after the header
-            .write(BACKUP_HEADER_MAX_SIZE as u32, &bytes)
+//         self.storage
-            .map_err(|err| anyhow!("Error writing body {:?}", err))?;
+//             .write(BACKUP_HEADER_MAX_SIZE as u32, &bytes)
-
+//             .map_err(|err| anyhow!("Error writing body {:?}", err))?;
-        anyhow::Ok(())
+//
-    }
+//         anyhow::Ok(())
-
+//     }
-    fn get_rtc_time(&mut self) -> anyhow::Result<DateTime<Utc>> {
+//
-        match self.rtc.datetime() {
+//     fn get_rtc_time(&mut self) -> anyhow::Result<DateTime<Utc>> {
-            OkStd(rtc_time) => anyhow::Ok(rtc_time.and_utc()),
+//         match self.rtc.datetime() {
-            Err(err) => {
+//             OkStd(rtc_time) => anyhow::Ok(rtc_time.and_utc()),
-                bail!("Error getting rtc time {:?}", err)
+//             Err(err) => {
-            }
+//                 bail!("Error getting rtc time {:?}", err)
-        }
+//             }
-    }
+//         }
-
+//     }
-    fn set_rtc_time(&mut self, time: &DateTime<Utc>) -> anyhow::Result<()> {
+//
-        let naive_time = time.naive_utc();
+//     fn set_rtc_time(&mut self, time: &DateTime<Utc>) -> anyhow::Result<()> {
-        match self.rtc.set_datetime(&naive_time) {
+//         let naive_time = time.naive_utc();
-            OkStd(_) => anyhow::Ok(()),
+//         match self.rtc.set_datetime(&naive_time) {
-            Err(err) => {
+//             OkStd(_) => anyhow::Ok(()),
-                bail!("Error getting rtc time {:?}", err)
+//             Err(err) => {
-            }
+//                 bail!("Error getting rtc time {:?}", err)
-        }
+//             }
-    }
+//         }
-}
+//     }
+// }

rust/src/hal/water.rs

@@ -1,171 +0,0 @@
-use crate::hal::TANK_MULTI_SAMPLE;
-use anyhow::{anyhow, bail};
-use ds18b20::Ds18b20;
-use esp_idf_hal::adc::oneshot::config::AdcChannelConfig;
-use esp_idf_hal::adc::oneshot::{AdcChannelDriver, AdcDriver};
-use esp_idf_hal::adc::{attenuation, Resolution, ADC1};
-use esp_idf_hal::delay::Delay;
-use esp_idf_hal::gpio::{AnyIOPin, AnyInputPin, Gpio5, InputOutput, PinDriver, Pull};
-use esp_idf_hal::pcnt::{
-    PcntChannel, PcntChannelConfig, PcntControlMode, PcntCountMode, PcntDriver, PinIndex, PCNT1,
-};
-use esp_idf_sys::EspError;
-use one_wire_bus::OneWire;
-
-pub struct TankSensor<'a> {
-    one_wire_bus: OneWire<PinDriver<'a, AnyIOPin, InputOutput>>,
-    tank_channel: AdcChannelDriver<'a, Gpio5, AdcDriver<'a, ADC1>>,
-    tank_power: PinDriver<'a, AnyIOPin, InputOutput>,
-    flow_counter: PcntDriver<'a>,
-    delay: Delay,
-}
-
-impl<'a> TankSensor<'a> {
-    pub(crate) fn create(
-        one_wire_pin: AnyIOPin,
-        adc1: ADC1,
-        gpio5: Gpio5,
-        tank_power_pin: AnyIOPin,
-        flow_sensor_pin: AnyIOPin,
-        pcnt1: PCNT1,
-    ) -> anyhow::Result<TankSensor<'a>> {
-        let mut one_wire_pin =
-            PinDriver::input_output_od(one_wire_pin).expect("Failed to configure pin");
-        one_wire_pin
-            .set_pull(Pull::Floating)
-            .expect("Failed to set pull");
-
-        let adc_config = AdcChannelConfig {
-            attenuation: attenuation::DB_11,
-            resolution: Resolution::Resolution12Bit,
-            calibration: esp_idf_hal::adc::oneshot::config::Calibration::Curve,
-        };
-        let tank_driver = AdcDriver::new(adc1).expect("Failed to configure ADC");
-        let tank_channel = AdcChannelDriver::new(tank_driver, gpio5, &adc_config)
-            .expect("Failed to configure ADC channel");
-
-        let mut tank_power =
-            PinDriver::input_output(tank_power_pin).expect("Failed to configure pin");
-        tank_power
-            .set_pull(Pull::Floating)
-            .expect("Failed to set pull");
-
-        let one_wire_bus =
-            OneWire::new(one_wire_pin).expect("OneWire bus did not pull up after release");
-
-        let mut flow_counter = PcntDriver::new(
-            pcnt1,
-            Some(flow_sensor_pin),
-            Option::<AnyInputPin>::None,
-            Option::<AnyInputPin>::None,
-            Option::<AnyInputPin>::None,
-        )?;
-
-        flow_counter.channel_config(
-            PcntChannel::Channel1,
-            PinIndex::Pin0,
-            PinIndex::Pin1,
-            &PcntChannelConfig {
-                lctrl_mode: PcntControlMode::Keep,
-                hctrl_mode: PcntControlMode::Keep,
-                pos_mode: PcntCountMode::Increment,
-                neg_mode: PcntCountMode::Hold,
-                counter_h_lim: i16::MAX,
-                counter_l_lim: 0,
-            },
-        )?;
-
-        Ok(TankSensor {
-            one_wire_bus,
-            tank_channel,
-            tank_power,
-            flow_counter,
-            delay: Default::default(),
-        })
-    }
-
-    pub fn reset_flow_meter(&mut self) {
-        self.flow_counter.counter_pause().unwrap();
-        self.flow_counter.counter_clear().unwrap();
-    }
-
-    pub fn start_flow_meter(&mut self) {
-        self.flow_counter.counter_resume().unwrap();
-    }
-
-    pub fn get_flow_meter_value(&mut self) -> i16 {
-        self.flow_counter.get_counter_value().unwrap()
-    }
-
-    pub fn stop_flow_meter(&mut self) -> i16 {
-        self.flow_counter.counter_pause().unwrap();
-        self.get_flow_meter_value()
-    }
-
-    pub fn water_temperature_c(&mut self) -> anyhow::Result<f32> {
-        //multisample should be moved to water_temperature_c
-        let mut attempt = 1;
-        let water_temp: Result<f32, anyhow::Error> = loop {
-            let temp = self.single_temperature_c();
-            match &temp {
-                Ok(res) => {
-                    println!("Water temp is {}", res);
-                    break temp;
-                }
-                Err(err) => {
-                    println!("Could not get water temp {} attempt {}", err, attempt)
-                }
-            }
-            if attempt == 5 {
-                break temp;
-            }
-            attempt += 1;
-        };
-        water_temp
-    }
-
-    fn single_temperature_c(&mut self) -> anyhow::Result<f32> {
-        self.one_wire_bus
-            .reset(&mut self.delay)
-            .map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;
-        let first = self.one_wire_bus.devices(false, &mut self.delay).next();
-        if first.is_none() {
-            bail!("Not found any one wire  Ds18b20");
-        }
-        let device_address = first
-            .unwrap()
-            .map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;
-
-        let water_temp_sensor = Ds18b20::new::<EspError>(device_address)
-            .map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;
-
-        water_temp_sensor
-            .start_temp_measurement(&mut self.one_wire_bus, &mut self.delay)
-            .map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;
-        ds18b20::Resolution::Bits12.delay_for_measurement_time(&mut self.delay);
-        let sensor_data = water_temp_sensor
-            .read_data(&mut self.one_wire_bus, &mut self.delay)
-            .map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;
-        if sensor_data.temperature == 85_f32 {
-            bail!("Ds18b20 dummy temperature returned");
-        }
-        anyhow::Ok(sensor_data.temperature / 10_f32)
-    }
-
-    pub fn tank_sensor_voltage(&mut self) -> anyhow::Result<f32> {
-        self.tank_power.set_high()?;
-        //let stabilize
-        self.delay.delay_ms(100);
-
-        let mut store = [0_u16; TANK_MULTI_SAMPLE];
-        for multisample in 0..TANK_MULTI_SAMPLE {
-            let value = self.tank_channel.read()?;
-            store[multisample] = value;
-        }
-        self.tank_power.set_low()?;
-
-        store.sort();
-        let median_mv = store[6] as f32 / 1000_f32;
-        anyhow::Ok(median_mv)
-    }
-}

rust/src/lib.rs

@@ -1,4 +0,0 @@
-#![allow(dead_code)]
-extern crate embedded_hal as hal;
-
-pub mod sipo;

rust/src/log/mod.rs

@@ -1,12 +1,16 @@
+use crate::vec;
+use alloc::string::ToString;
+use alloc::vec::Vec;
+use embassy_sync::blocking_mutex::raw::CriticalSectionRawMutex;
+use embassy_sync::lazy_lock::LazyLock;
+use embassy_sync::mutex::Mutex;
+use embassy_time::Instant;
+use esp_println::println;
+use log::info;
 use serde::Serialize;
-use std::{collections::HashMap, sync::Mutex};
-use strum::EnumIter;
 use strum_macros::IntoStaticStr;
 
-use esp_idf_svc::systime::EspSystemTime;
-use once_cell::sync::Lazy;
 use ringbuffer::{ConstGenericRingBuffer, RingBuffer};
-use text_template::Template;
 use unit_enum::UnitEnum;
 
 const TXT_SHORT_LENGTH: usize = 8;
@@ -18,8 +22,9 @@ const BUFFER_SIZE: usize = 220;
 static mut BUFFER: ConstGenericRingBuffer<LogEntry, BUFFER_SIZE> =
     ConstGenericRingBuffer::<LogEntry, BUFFER_SIZE>::new();
 #[allow(static_mut_refs)]
-static BUFFER_ACCESS: Lazy<Mutex<&mut ConstGenericRingBuffer<LogEntry, BUFFER_SIZE>>> =
+static BUFFER_ACCESS: LazyLock<
-    Lazy::new(|| unsafe { Mutex::new(&mut BUFFER) });
+    Mutex<CriticalSectionRawMutex, &mut ConstGenericRingBuffer<LogEntry, BUFFER_SIZE>>,
+> = LazyLock::new(|| unsafe { Mutex::new(&mut BUFFER) });
 
 #[derive(Serialize, Debug, Clone)]
 pub struct LogEntry {
@@ -31,11 +36,11 @@ pub struct LogEntry {
     pub txt_long: heapless::String<TXT_LONG_LENGTH>,
 }
 
-pub fn init() {
+pub async fn init() {
     unsafe {
         BUFFER = ConstGenericRingBuffer::<LogEntry, BUFFER_SIZE>::new();
     };
-    let mut access = BUFFER_ACCESS.lock().unwrap();
+    let mut access = BUFFER_ACCESS.get().lock().await;
     access.drain().for_each(|_| {});
 }
 
@@ -57,8 +62,8 @@ fn limit_length<const LIMIT: usize>(input: &str, target: &mut heapless::String<L
     }
 }
 
-pub fn get_log() -> Vec<LogEntry> {
+pub async fn get_log() -> Vec<LogEntry> {
-    let buffer = BUFFER_ACCESS.lock().unwrap();
+    let buffer = BUFFER_ACCESS.get().lock().await;
     let mut read_copy = Vec::new();
     for entry in buffer.iter() {
         let copy = entry.clone();
@@ -68,32 +73,32 @@ pub fn get_log() -> Vec<LogEntry> {
     read_copy
 }
 
-pub fn log(message_key: LogMessage, number_a: u32, number_b: u32, txt_short: &str, txt_long: &str) {
+pub async fn log(
+    message_key: LogMessage,
+    number_a: u32,
+    number_b: u32,
+    txt_short: &str,
+    txt_long: &str,
+) {
     let mut txt_short_stack: heapless::String<TXT_SHORT_LENGTH> = heapless::String::new();
     let mut txt_long_stack: heapless::String<TXT_LONG_LENGTH> = heapless::String::new();
 
     limit_length(txt_short, &mut txt_short_stack);
     limit_length(txt_long, &mut txt_long_stack);
 
-    let time = EspSystemTime {}.now().as_millis() as u64;
+    //TODO
-
+    let time = Instant::now().as_secs();
+    // let time = EspSystemTime {}.now().as_millis() as u64;
+    //
     let ordinal = message_key.ordinal() as u16;
-    let template_string: &str = message_key.into();
+    let template: &str = message_key.into();
+    let mut template_string = template.to_string();
+    template_string = template_string.replace("${number_a}", number_a.to_string().as_str());
+    template_string = template_string.replace("${number_b}", number_b.to_string().as_str());
+    template_string = template_string.replace("${txt_long}", txt_long);
+    template_string = template_string.replace("${txt_short}", txt_short);
 
-    let mut values: HashMap<&str, &str> = HashMap::new();
+    info!("LOG: {} : {}", time, template_string);
-    let number_a_str = number_a.to_string();
-    let number_b_str = number_b.to_string();
-
-    values.insert("number_a", &number_a_str);
-    values.insert("number_b", &number_b_str);
-    values.insert("txt_short", txt_short);
-    values.insert("txt_long", txt_long);
-
-    let template = Template::from(template_string);
-    let serial_entry = template.fill_in(&values);
-
-    println!("{serial_entry}");
-    //TODO push to mqtt?
 
     let entry = LogEntry {
         timestamp: time,
@@ -104,29 +109,10 @@ pub fn log(message_key: LogMessage, number_a: u32, number_b: u32, txt_short: &st
         txt_long: txt_long_stack,
     };
 
-    let mut buffer = BUFFER_ACCESS.lock().unwrap();
+    let mut buffer = BUFFER_ACCESS.get().lock().await;
     buffer.push(entry);
 }
-
+#[derive(IntoStaticStr, Serialize, PartialEq, Eq, PartialOrd, Ord, Clone, UnitEnum)]
-#[cfg(test)]
-mod tests {
-    use super::*;
-
-    #[test]
-    fn within_limit() {
-        let test = "12345678";
-
-        let mut txt_short_stack: heapless::String<TXT_SHORT_LENGTH> = heapless::String::new();
-        let mut txt_long_stack: heapless::String<TXT_LONG_LENGTH> = heapless::String::new();
-        limit_length(test, &mut txt_short_stack);
-        limit_length(test, &mut txt_long_stack);
-
-        assert_eq!(txt_short_stack.as_str(), test);
-        assert_eq!(txt_long_stack.as_str(), test);
-    }
-}
-
-#[derive(IntoStaticStr, EnumIter, Serialize, PartialEq, Eq, PartialOrd, Ord, Clone, UnitEnum)]
 pub enum LogMessage {
     #[strum(
         serialize = "Reset due to ${txt_long} requires rtc clear ${number_a} and force config mode ${number_b}"

rust/src/plant_state.rs

@@ -3,6 +3,7 @@ use crate::{
     hal::{Sensor, HAL},
     in_time_range,
 };
+use alloc::string::{String, ToString};
 use chrono::{DateTime, TimeDelta, Utc};
 use chrono_tz::Tz;
 use serde::{Deserialize, Serialize};
@@ -115,9 +116,9 @@ fn map_range_moisture(
 }
 
 impl PlantState {
-    pub fn read_hardware_state(plant_id: usize, board: &mut HAL) -> Self {
+    pub async fn read_hardware_state(plant_id: usize, board: &mut HAL<'_>) -> Self {
         let sensor_a = if board.board_hal.get_config().plants[plant_id].sensor_a {
-            match board.board_hal.measure_moisture_hz(plant_id, Sensor::A) {
+            match board.board_hal.measure_moisture_hz(plant_id, Sensor::A).await {
                 Ok(raw) => match map_range_moisture(
                     raw,
                     board.board_hal.get_config().plants[plant_id].moisture_sensor_min_frequency,
@@ -138,7 +139,7 @@ impl PlantState {
         };
 
         let sensor_b = if board.board_hal.get_config().plants[plant_id].sensor_b {
-            match board.board_hal.measure_moisture_hz(plant_id, Sensor::B) {
+            match board.board_hal.measure_moisture_hz(plant_id, Sensor::B).await {
                 Ok(raw) => match map_range_moisture(
                     raw,
                     board.board_hal.get_config().plants[plant_id].moisture_sensor_min_frequency,
@@ -263,50 +264,50 @@ impl PlantState {
             PlantWateringMode::TimerOnly => !self.pump_in_timeout(plant_conf, current_time),
         }
     }
-
+    //
-    pub fn to_mqtt_info(
+    // pub fn to_mqtt_info(
-        &self,
+    //     &self,
-        plant_conf: &PlantConfig,
+    //     plant_conf: &PlantConfig,
-        current_time: &DateTime<Tz>,
+    //     current_time: &DateTime<Tz>,
-    ) -> PlantInfo<'_> {
+    // ) -> PlantInfo<'_> {
-        PlantInfo {
+    //     PlantInfo {
-            sensor_a: &self.sensor_a,
+    //         sensor_a: &self.sensor_a,
-            sensor_b: &self.sensor_b,
+    //         sensor_b: &self.sensor_b,
-            mode: plant_conf.mode,
+    //         mode: plant_conf.mode,
-            do_water: self.needs_to_be_watered(plant_conf, current_time),
+    //         do_water: self.needs_to_be_watered(plant_conf, current_time),
-            dry: if let Some(moisture_percent) = self.plant_moisture().0 {
+    //         dry: if let Some(moisture_percent) = self.plant_moisture().0 {
-                moisture_percent < plant_conf.target_moisture
+    //             moisture_percent < plant_conf.target_moisture
-            } else {
+    //         } else {
-                false
+    //             false
-            },
+    //         },
-            cooldown: self.pump_in_timeout(plant_conf, current_time),
+    //         cooldown: self.pump_in_timeout(plant_conf, current_time),
-            out_of_work_hour: in_time_range(
+    //         out_of_work_hour: in_time_range(
-                current_time,
+    //             current_time,
-                plant_conf.pump_hour_start,
+    //             plant_conf.pump_hour_start,
-                plant_conf.pump_hour_end,
+    //             plant_conf.pump_hour_end,
-            ),
+    //         ),
-            consecutive_pump_count: self.pump.consecutive_pump_count,
+    //         consecutive_pump_count: self.pump.consecutive_pump_count,
-            pump_error: self.pump.is_err(plant_conf),
+    //         pump_error: self.pump.is_err(plant_conf),
-            last_pump: self
+    //         last_pump: self
-                .pump
+    //             .pump
-                .previous_pump
+    //             .previous_pump
-                .map(|t| t.with_timezone(&current_time.timezone())),
+    //             .map(|t| t.with_timezone(&current_time.timezone())),
-            next_pump: if matches!(
+    //         next_pump: if matches!(
-                plant_conf.mode,
+    //             plant_conf.mode,
-                PlantWateringMode::TimerOnly
+    //             PlantWateringMode::TimerOnly
-                    | PlantWateringMode::TargetMoisture
+    //                 | PlantWateringMode::TargetMoisture
-                    | PlantWateringMode::MinMoisture
+    //                 | PlantWateringMode::MinMoisture
-            ) {
+    //         ) {
-                self.pump.previous_pump.and_then(|last_pump| {
+    //             self.pump.previous_pump.and_then(|last_pump| {
-                    last_pump
+    //                 last_pump
-                        .checked_add_signed(TimeDelta::minutes(plant_conf.pump_cooldown_min.into()))
+    //                     .checked_add_signed(TimeDelta::minutes(plant_conf.pump_cooldown_min.into()))
-                        .map(|t| t.with_timezone(&current_time.timezone()))
+    //                     .map(|t| t.with_timezone(&current_time.timezone()))
-                })
+    //             })
-            } else {
+    //         } else {
-                None
+    //             None
-            },
+    //         },
-        }
+    //     }
-    }
+    // }
 }
 
 #[derive(Debug, PartialEq, Serialize)]
@@ -329,8 +330,8 @@ pub struct PlantInfo<'a> {
     /// how often has the pump been watered without reaching target moisture
     consecutive_pump_count: u32,
     pump_error: Option<PumpError>,
-    /// last time when the pump was active
+    // /// last time when the pump was active
-    last_pump: Option<DateTime<Tz>>,
+    // last_pump: Option<DateTime<Tz>>,
-    /// next time when pump should activate
+    // /// next time when pump should activate
-    next_pump: Option<DateTime<Tz>>,
+    // next_pump: Option<DateTime<Tz>>,
 }

rust/src/sipo.rs

@@ -1,10 +1,11 @@
 //! Serial-in parallel-out shift register
 
 use core::cell::RefCell;
+use core::convert::Infallible;
+use core::iter::Iterator;
 use core::mem::{self, MaybeUninit};
-use std::convert::Infallible;
+use core::result::{Result, Result::Ok};
-
+use embedded_hal::digital::OutputPin;
-use hal::digital::OutputPin;
 
 trait ShiftRegisterInternal {
     fn update(&self, index: usize, command: bool) -> Result<(), ()>;

rust/src/tank.rs

@@ -1,5 +1,5 @@
-use crate::{config::TankConfig, hal::HAL};
+use crate::alloc::string::{String, ToString};
-use anyhow::Context;
+use crate::config::TankConfig;
 use serde::Serialize;
 
 const OPEN_TANK_VOLTAGE: f32 = 3.0;
@@ -150,21 +150,21 @@ impl TankState {
     }
 }
 
-pub fn determine_tank_state(board: &mut std::sync::MutexGuard<'_, HAL<'_>>) -> TankState {
+// pub fn determine_tank_state(board: &mut std::sync::MutexGuard<'_, HAL<'_>>) -> TankState {
-    if board.board_hal.get_config().tank.tank_sensor_enabled {
+//     if board.board_hal.get_config().tank.tank_sensor_enabled {
-        match board
+//         match board
-            .board_hal
+//             .board_hal
-            .get_tank_sensor()
+//             .get_tank_sensor()
-            .context("no sensor")
+//             .context("no sensor")
-            .and_then(|f| f.tank_sensor_voltage())
+//             .and_then(|f| f.tank_sensor_voltage())
-        {
+//         {
-            Ok(raw_sensor_value_mv) => TankState::Present(raw_sensor_value_mv),
+//             Ok(raw_sensor_value_mv) => TankState::Present(raw_sensor_value_mv),
-            Err(err) => TankState::Error(TankError::BoardError(err.to_string())),
+//             Err(err) => TankState::Error(TankError::BoardError(err.to_string())),
-        }
+//         }
-    } else {
+//     } else {
-        TankState::Disabled
+//         TankState::Disabled
-    }
+//     }
-}
+// }
 
 #[derive(Debug, Serialize)]
 /// Information structure send to mqtt for monitoring purposes