lightpanel v1.0

#V1.1 info Resistor R3 of first production batch is wrong, should be ~ 1-10ohm, suggest 2.2 but is 1kohm. Pcb works but is very dark due to this and cannot reach proper signal levels for next pcb.

V1.1 has reverse power supply protection, and should not cause issues with backfeeding via usb or wrong polarity of power supply.

###Import application note Do not chain Multiple boards while powering only via USB!

The Voltage converters will reverse feed the second board, and in the process kill most of the LED's on the first board!

ESP32C3 notice: If flashing while connected to the board, the ESP might damage it's