Go to file

ollo e4c8118731 Increased webserver delay		2019-04-18 20:44:18 +02:00
os	Updated flashing command	2019-03-24 22:01:51 +01:00
simulation	Added documentation for simulator without Eclipse	2019-01-06 21:23:18 +01:00
tools	Flash tool works with Nodemcu 2.2	2019-04-18 20:34:28 +02:00
unit	All tests calculating the length of the word passed	2017-03-01 18:28:37 +01:00
.gitignore	Exclude the new testscript, as it is always generated with the same test values and must not stored therefore	2016-05-15 23:00:18 +02:00
displayword.lua	added ADC brightness reading	2019-03-22 23:52:25 +01:00
index.html	Flashing first the old firmware	2019-03-08 21:30:21 +01:00
init.lua	Automatic compile software after upgrade	2019-04-18 20:28:57 +02:00
main.lua	Merge simulation with main stream	2018-12-27 17:06:45 +01:00
Readme.md	Add remote flashing procedure	2019-04-18 16:32:35 +02:00
timecore.lua	More local variables; ~ 2k more RAM	2016-06-19 15:57:57 +02:00
webpage.html	Fixed webpage	2019-04-17 20:23:46 +02:00
webserver.lua	Increased webserver delay	2019-04-18 20:44:18 +02:00
wordclock.lua	added: halb einS	2019-03-23 13:54:29 +01:00

ESP Wordclock

Setup

Install the firmware on the ESP: The ESP must be set into the bootloader mode, like this

The firmware can be downloaded with the following script:

cd os/
./flash.sh ttyUSB0

Reboot the ESP, with a serial terminal, format the filesystem with the following command and reboot it:

file.format()
node.reboot()

Then disconnect the serial terminal and copy the required files to the microcontroller:

./tools/initialFlash.sh /dev/ttyUSB0

Determine the IP address of your clock and execute the following script:

./tools/remoteFlash.sh IP-Address