Go to file

C3MA cdcd37a997 Started with a new solution where the webpage is fetched from a seperate file		2016-12-14 20:15:25 +01:00
os	6k more RAM when used a minimalistic compiled firmware for this use-case	2016-06-23 20:36:21 +02:00
tools	Automatically reboot the device after the inital flash	2016-07-03 18:41:09 +02:00
unit	Updated code after executing new testscript	2016-05-15 22:59:17 +02:00
.gitignore	Exclude the new testscript, as it is always generated with the same test values and must not stored therefore	2016-05-15 23:00:18 +02:00
displayword.lua	Fixed EINS	2016-12-12 20:25:55 +01:00
index.html	Started with a new solution where the webpage is fetched from a seperate file	2016-12-14 20:15:25 +01:00
init.lua	added color picker	2016-12-14 18:37:56 +01:00
main.lua	Started with a new solution where the webpage is fetched from a seperate file	2016-12-14 20:15:25 +01:00
Readme.md	Documentation for the first setup updated	2016-06-23 20:45:07 +02:00
timecore.lua	More local variables; ~ 2k more RAM	2016-06-19 15:57:57 +02:00
webpage.lua	Started with a new solution where the webpage is fetched from a seperate file	2016-12-14 20:15:25 +01:00
webserver.lua	Started with a new solution where the webpage is fetched from a seperate file	2016-12-14 20:15:25 +01:00
wordclock.lua	Work more with even less memory! what a terrible world :-/	2016-06-19 00:50:18 +02:00

ESP Wordclock

Setup

Install the firmware on the ESP: The ESP must be set into the bootloader mode, like this

The firmware can be downloaded with the following script:

cd os/
./flash.sh ttyUSB0

Reboot the ESP, with a serial terminal, format the filesystem with the following command and reboot it:

file.format()
node.reboot()

Then disconnect the serial terminal and copy the required files to the microcontroller:

./tools/initialFlash.sh /dev/ttyUSB0