Go to file

ollo ba6734d5ad refactoring displayword to a module		2019-05-03 20:45:16 +02:00
os	Added binary files	2019-04-19 21:03:43 +02:00
simulation	Added ADC stimulation into the simulation	2019-04-24 21:21:19 +02:00
tools	Clean memory before writing file	2019-04-18 21:46:15 +02:00
unit	Remove display_countcharacters_de and display_countwords_de	2019-04-20 21:39:50 +02:00
.gitignore	Exclude the new testscript, as it is always generated with the same test values and must not stored therefore	2016-05-15 23:00:18 +02:00
displayword.lua	refactoring displayword to a module	2019-05-03 20:45:16 +02:00
index.html	Flashing first the old firmware	2019-03-08 21:30:21 +01:00
init.lua	Visualize compiling	2019-04-18 22:51:09 +02:00
main.lua	Reworked require with dofile	2019-05-03 20:19:12 +02:00
Readme.md	Add remote flashing procedure	2019-04-18 16:32:35 +02:00
timecore.lua	More local variables; ~ 2k more RAM	2016-06-19 15:57:57 +02:00
webpage.html	Fixed webpage	2019-04-17 20:23:46 +02:00
webserver.lua	Remove display_countcharacters_de and display_countwords_de	2019-04-20 21:39:50 +02:00
wordclock.lua	Remove display_countcharacters_de and display_countwords_de	2019-04-20 21:39:50 +02:00

ESP Wordclock

Setup

Install the firmware on the ESP: The ESP must be set into the bootloader mode, like this

The firmware can be downloaded with the following script:

cd os/
./flash.sh ttyUSB0

Reboot the ESP, with a serial terminal, format the filesystem with the following command and reboot it:

file.format()
node.reboot()

Then disconnect the serial terminal and copy the required files to the microcontroller:

./tools/initialFlash.sh /dev/ttyUSB0

Determine the IP address of your clock and execute the following script:

./tools/remoteFlash.sh IP-Address