Go to file

ollo b5f46a14d2 Indention improved		2020-03-06 23:55:14 +01:00
os	Added binary files	2019-04-19 21:03:43 +02:00
simulation	Display one color after the other	2019-05-22 21:25:33 +02:00
tools	Indention improved	2020-03-06 23:55:14 +01:00
unit	Remove display_countcharacters_de and display_countwords_de	2019-04-20 21:39:50 +02:00
.gitignore	Exclude the new testscript, as it is always generated with the same test values and must not stored therefore	2016-05-15 23:00:18 +02:00
displayword.lua	Remove debugging	2020-03-04 19:10:37 +01:00
init.lua	Added example for telnet command	2020-03-04 22:24:13 +01:00
main.lua	Remove debugging	2020-03-04 19:10:37 +01:00
Readme.md	Add remote flashing procedure	2019-04-18 16:32:35 +02:00
telnet.lua	Indention improved	2020-03-06 23:55:14 +01:00
timecore.lua	More local variables; ~ 2k more RAM	2016-06-19 15:57:57 +02:00
webpage.html	Reduced html stuff	2020-02-12 20:14:01 +01:00
webserver.lua	Merge branch 'master' into sim2	2020-01-29 20:47:00 +01:00
wordclock.lua	Remove display_countcharacters_de and display_countwords_de	2019-04-20 21:39:50 +02:00

ESP Wordclock

Setup

Install the firmware on the ESP: The ESP must be set into the bootloader mode, like this

The firmware can be downloaded with the following script:

cd os/
./flash.sh ttyUSB0

Reboot the ESP, with a serial terminal, format the filesystem with the following command and reboot it:

file.format()
node.reboot()

Then disconnect the serial terminal and copy the required files to the microcontroller:

./tools/initialFlash.sh /dev/ttyUSB0

Determine the IP address of your clock and execute the following script:

./tools/remoteFlash.sh IP-Address