Go to file

ollo 6813822f6d Display wordclock function with new parameters: color for minute1 to color for minute2 and amount of characters		2017-03-01 18:55:18 +01:00
os	6k more RAM when used a minimalistic compiled firmware for this use-case	2016-06-23 20:36:21 +02:00
tools	Automatically reboot the device after the inital flash	2016-07-03 18:41:09 +02:00
unit	All tests calculating the length of the word passed	2017-03-01 18:28:37 +01:00
.gitignore	Exclude the new testscript, as it is always generated with the same test values and must not stored therefore	2016-05-15 23:00:18 +02:00
displayword.lua	Display wordclock function with new parameters: color for minute1 to color for minute2 and amount of characters	2017-03-01 18:55:18 +01:00
index.html	Further webserver stuff	2016-12-17 02:09:23 +01:00
init.lua	Updated blacklisted files	2017-01-03 14:26:13 +01:00
main.lua	Display wordclock function with new parameters: color for minute1 to color for minute2 and amount of characters	2017-03-01 18:55:18 +01:00
Readme.md	Documentation for the first setup updated	2016-06-23 20:45:07 +02:00
timecore.lua	More local variables; ~ 2k more RAM	2016-06-19 15:57:57 +02:00
webpage.html	Added another parameter to set the background color of the clock	2017-01-03 14:38:17 +01:00
webserver.lua	Color is transformed between RGB and GRB	2017-01-04 21:31:57 +01:00
wordclock.lua	All tests calculating the length of the word passed	2017-03-01 18:28:37 +01:00

ESP Wordclock

Setup

Install the firmware on the ESP: The ESP must be set into the bootloader mode, like this

The firmware can be downloaded with the following script:

cd os/
./flash.sh ttyUSB0

Reboot the ESP, with a serial terminal, format the filesystem with the following command and reboot it:

file.format()
node.reboot()

Then disconnect the serial terminal and copy the required files to the microcontroller:

./tools/initialFlash.sh /dev/ttyUSB0