Removed temperature reading

ds18b20.lua

@@ -1,138 +0,0 @@
---------------------------------------------------------------------------------
--- DS18B20 one wire module for NODEMCU
--- NODEMCU TEAM
--- LICENCE: http://opensource.org/licenses/MIT
--- Vowstar <vowstar@nodemcu.com>
--- 2015/02/14 sza2 <sza2trash@gmail.com> Fix for negative values
---------------------------------------------------------------------------------
-
--- Set module name as parameter of require
-local modname = ...
-local M = {}
-_G[modname] = M
---------------------------------------------------------------------------------
--- Local used variables
---------------------------------------------------------------------------------
--- DS18B20 dq pin
-local pin = nil
--- DS18B20 default pin
-local defaultPin = 9
---------------------------------------------------------------------------------
--- Local used modules
---------------------------------------------------------------------------------
--- Table module
-local table = table
--- String module
-local string = string
--- One wire module
-local ow = ow
--- Timer module
-local tmr = tmr
--- Limited to local environment
-setfenv(1,M)
---------------------------------------------------------------------------------
--- Implementation
---------------------------------------------------------------------------------
-C = 0
-F = 1
-K = 2
-function setup(dq)
-  pin = dq
-  if(pin == nil) then
-    pin = defaultPin
-  end
-  ow.setup(pin)
-end
-
-function addrs()
-  setup(pin)
-  tbl = {}
-  ow.reset_search(pin)
-  repeat
-    addr = ow.search(pin)
-    if(addr ~= nil) then
-      table.insert(tbl, addr)
-    end
-    tmr.wdclr()
-  until (addr == nil)
-  ow.reset_search(pin)
-  return tbl
-end
-
-function readNumber(addr, unit)
-  result = nil
-  setup(pin)
-  flag = false
-  if(addr == nil) then
-    ow.reset_search(pin)
-    count = 0
-    repeat
-      count = count + 1
-      addr = ow.search(pin)
-      tmr.wdclr()
-    until((addr ~= nil) or (count > 100))
-    ow.reset_search(pin)
-  end
-  if(addr == nil) then
-    return result
-  end
-  crc = ow.crc8(string.sub(addr,1,7))
-  if (crc == addr:byte(8)) then
-    if ((addr:byte(1) == 0x10) or (addr:byte(1) == 0x28)) then
-      -- print("Device is a DS18S20 family device.")
-      ow.reset(pin)
-      ow.select(pin, addr)
-      ow.write(pin, 0x44, 1)
-      -- tmr.delay(1000000)
-      present = ow.reset(pin)
-      ow.select(pin, addr)
-      ow.write(pin,0xBE,1)
-      -- print("P="..present)
-      data = nil
-      data = string.char(ow.read(pin))
-      for i = 1, 8 do
-        data = data .. string.char(ow.read(pin))
-      end
-      -- print(data:byte(1,9))
-      crc = ow.crc8(string.sub(data,1,8))
-      -- print("CRC="..crc)
-      if (crc == data:byte(9)) then
-        t = (data:byte(1) + data:byte(2) * 256)
-        if (t > 32767) then
-          t = t - 65536
-        end
-        if(unit == nil or unit == C) then
-          t = t * 625
-        elseif(unit == F) then
-          t = t * 1125 + 320000
-        elseif(unit == K) then
-          t = t * 625 + 2731500
-        else
-          return nil
-        end
-        t = t / 100
-        -- print("Temperature="..t1.."."..t2.." Centigrade")
-        -- result = t1.."."..t2
-        return t
-      end
-      tmr.wdclr()
-    else
-    -- print("Device family is not recognized.")
-    end
-  else
-  -- print("CRC is not valid!")
-  end
-  return result
-end
-
-function read(addr, unit)
-  t = readNumber(addr, unit)
-  if (t == nil) then
-    return nil
-  else
-    return t
-  end
-end
-
--- Return module table
-return M

mqtt.lua

@@ -38,32 +38,10 @@ function startMqtt()
     end)
 end
 
-function readTemp()
-  if (t ~= nil) then
-    addrs=t.addrs()
-    -- Total DS18B20 numbers
-    sensors=table.getn(addrs)
-    local temp1=0
-    if (sensors >= 1) then
-        temp1=t.read(addrs[1])
-    end
-    return temp1
-  else
-    return nil
-  end
-end
-
 function startMqttClient()
     if (mqttServer ~= nil and mqttPrefix ~= nil) then
         startMqtt()
         print "Started MQTT client"
-        if (file.open("ds18b20.lc")) then
-          t=require("ds18b20")
-          t.setup(2) -- GPIO4
-          readTemp() -- read once, to setup chip
-          print "Setup temperature"
-        end
-        
         oldBrightness=0
         oldTemp=0
         tmr.alarm(5, 5001, 1 ,function()
@@ -74,9 +52,6 @@ function startMqttClient()
                 end
                 if (oldBrightness ~= briPercent) then
                  m:publish(mqttPrefix .. "/brightness", tostring(briPercent), 0, 0)
-                elseif (temp ~= nil and temp ~= oldTemp) then
-                 oldTemp = temp
-                 m:publish(mqttPrefix .. "/temp", tostring(temp), 0, 0)
                 else
                  m:publish(mqttPrefix .. "/heap", tostring(node.heap()), 0, 0)
                 end