Ollo
/
HomieRoomSensor
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
39 Commits 3 Branches 0 Tags 267 KiB
C++ 69.1%
Python 26.8%
Shell 2.9%
C 1.2%
Go to file
Ollo 02a5095bf6 keep the RGB status, during sleeping 2021-12-23 15:29:49 +01:00
data/homie Initial version 2021-11-15 19:03:27 +01:00
host Spelling improved 2021-12-06 20:18:23 +01:00
include Prepared sleeping 2021-12-23 14:34:47 +01:00
src keep the RGB status, during sleeping 2021-12-23 15:29:49 +01:00
.gitignore Initial version 2021-11-15 19:03:27 +01:00
PM1006.code-workspace Initial version 2021-11-15 19:03:27 +01:00
Readme.md Spelling improved 2021-12-06 20:18:23 +01:00
platformio.ini Button is published on MQTT, too 2021-12-12 14:32:29 +01:00

Readme.md

Homie Room Sensor

located in IKEAs Vindriktning

after this upgrade it will measure:

  • air quality
  • temperature
  • pressure
  • altitude

The system can be powered by USB-C or Micro-USB, attached at ESP8266 board.

Filesystem

Configuration

Use the config-example.json from the host folder and create here a config.json file.

HowTo upload

Start Platform.io Open a new Atom-Terminal and generate the filesystem with the following command : pio run -t buildfs Upload this new generated filesystem with: pio run -t uploadfs

Command pio

Can be found at ~/.platformio/penv/bin/pio

Hardware

ESP8266 version ESP12 was used.

The prototype was based on the Witty board

REST         |       TXD
ADC    LDR   |       RXD
CH_PD        |       GPIO05
GPIO16       | BTN   GPIO04
GPIO14       |       GPIO00
GPIO12 RGB-G |       GPIO02
GPIO13 RGB-B | RGB-R GPIO15
VCC          |       GND
            USB

The following pins are used:

  • GPIO4 PM1006 particle sensor PIN REST on Vindriktning board
  • GPIO2 WS2812 stripe out of three LEDs, replacing the original LEDs at front
  • GPIO15 Red LED (optional)
  • GPIO12 Green LED (optional) Used as 3.3V Supply for the I2C sensor
  • GPIO13 Blue LED (optional)
  • GPIO13 VCC of I2C (3.3 V)
  • GPIO14 I2C clock
  • GPIO5 I2C data pin

Bill of materials

  • IKEA Vindriktning
  • ESP8266 (e.g. Witty board)
  • BMP280 sensor
  • some wire

Sources

For the Witty board