History

Empire b933516062 fix for bq34z100 led mode, added i2c header		2024-01-22 23:13:37 +01:00
..
bom	move to typescript, testmode, shiftregister revival	2023-12-23 01:59:00 +01:00
kicad-stuff	added batterymanagemt	2023-10-22 20:06:27 +02:00
production/PlantCtrlESP32_2023-10-26_23-11-30	move to typescript, testmode, shiftregister revival	2023-12-23 01:59:00 +01:00
.gitignore	Updated ignore files	2020-10-16 20:37:30 +02:00
4435.kicad_mod	changes	2023-10-21 21:59:41 +02:00
CN3306.kicad_sym	add charging circuit	2023-10-15 13:16:44 +02:00
CN3795.kicad_sym	add charging circuit	2023-10-15 13:16:44 +02:00
fp-lib-table	added batterymanagemt	2023-10-22 20:06:27 +02:00
generatePCB.sh	Moved PCB stuff into the borad folder	2020-12-21 15:28:40 +01:00
JLCPCB SMT Parts Library(20201125).ods	improved schematic parts	2020-11-25 21:42:29 +01:00
PlantCtrlESP32_Board0_7.ods	Last minute fixes while assembly	2021-01-30 15:04:10 +01:00
PlantCtrlESP32-rescue.dcm	stuff changed	2023-03-03 19:58:55 +01:00
PlantCtrlESP32.erc	0.10 rev final	2021-06-23 20:20:55 +02:00
PlantCtrlESP32.kicad_pcb	fix for bq34z100 led mode, added i2c header	2024-01-22 23:13:37 +01:00
PlantCtrlESP32.kicad_pcb.orig	0.10 rev final	2021-06-23 20:20:55 +02:00
PlantCtrlESP32.kicad_prl	fix for bq34z100 led mode, added i2c header	2024-01-22 23:13:37 +01:00
PlantCtrlESP32.kicad_pro	finalize layout for comparator	2023-11-01 22:44:32 +01:00
PlantCtrlESP32.kicad_sch	fix for bq34z100 led mode, added i2c header	2024-01-22 23:13:37 +01:00
PlantCtrlESP32.kicad_sch-bak	move to typescript, testmode, shiftregister revival	2023-12-23 01:59:00 +01:00
PlantCtrlESP32.round-tracks-config	move to typescript, testmode, shiftregister revival	2023-12-23 01:59:00 +01:00
PlantCtrlESP32.sch	Set 2k2 as pullup for I2C	2021-06-23 22:05:24 +02:00
R_Shunt_Vishay_WSK2512_6332Metric_T1.19mm.kicad_mod	changes	2023-10-21 21:59:41 +02:00
ReadMe.md	ESP32 based project	2020-09-07 18:18:46 +02:00
sym-lib-table	added batterymanagemt	2023-10-22 20:06:27 +02:00

ReadMe.md

ESP32 Plant Control Board

The board was built with manily through hole components for easy build and production with a mill.

GPIO Mapping

See in the parent folder at include/ControllerConfiguration.h

Routing

In order to use the the mill, the following parameter were used:

Clearance 0.2mm
Track width of 1.2mm or 1.0mm at minimum (when pins of a part are too close)