C3MA/PlantCtrl

History

Empire 42ce4cdda2 Revert "add resistive frequency sensor, updated dependencies" This reverts commit `17d16a6eef`.		2023-02-12 12:40:38 +01:00
..
gerber	0.10 rev final	2021-06-23 20:20:55 +02:00
kicad-stuff	added power supervisor	2021-02-10 00:03:41 +01:00
.gitignore	Updated ignore files	2020-10-16 20:37:30 +02:00
fp-lib-table	Schematic Draft finished; Routing started	2020-09-14 19:20:33 +02:00
generatePCB.sh	Moved PCB stuff into the borad folder	2020-12-21 15:28:40 +01:00
JLCPCB SMT Parts Library(20201125).ods	improved schematic parts	2020-11-25 21:42:29 +01:00
PlantCtrlESP32_Board0_7.ods	Last minute fixes while assembly	2021-01-30 15:04:10 +01:00
PlantCtrlESP32.erc	0.10 rev final	2021-06-23 20:20:55 +02:00
PlantCtrlESP32.kicad_pcb	Set 2k2 as pullup for I2C	2021-06-23 22:05:24 +02:00
PlantCtrlESP32.kicad_pcb.orig	0.10 rev final	2021-06-23 20:20:55 +02:00
PlantCtrlESP32.pro	new extension header, improved labeling of connectors, optimized layout	2021-06-10 23:04:13 +02:00
PlantCtrlESP32.sch	Set 2k2 as pullup for I2C	2021-06-23 22:05:24 +02:00
ReadMe.md	ESP32 based project	2020-09-07 18:18:46 +02:00
sym-lib-table	Revert "add resistive frequency sensor, updated dependencies"	2023-02-12 12:40:38 +01:00

ReadMe.md

ESP32 Plant Control Board

The board was built with manily through hole components for easy build and production with a mill.

GPIO Mapping

See in the parent folder at include/ControllerConfiguration.h

Routing

In order to use the the mill, the following parameter were used:

Clearance 0.2mm
Track width of 1.2mm or 1.0mm at minimum (when pins of a part are too close)