Removed index to indentify temperatur sensors

esp32/Readme.md

@@ -81,5 +81,6 @@ DS18B20 one wire temp sensor
    * Timeout um nicht ewig aufs WLAN zu warten
  * Nicht mehrere Messungen vom Temp-Sensor nur warten, bis wir einen Wert bekommen
  * Partitionslayout
+ * OW-search address in topic nutzen
 
 

esp32/include/DS2438.h

@@ -1,18 +1,6 @@
-/*
+/**
- *   DS2438.h
+ *  @file DS2438.h
  *
- *   by Joe Bechter
- *
- *   (C) 2012, bechter.com
- *
- *   All files, software, schematics and designs are provided as-is with no warranty.
- *   All files, software, schematics and designs are for experimental/hobby use.
- *   Under no circumstances should any part be used for critical systems where safety,
- *   life or property depends upon it. You are responsible for all use.
- *   You are free to use, modify, derive or otherwise extend for your own non-commercial purposes provided
- *       1. No part of this software or design may be used to cause injury or death to humans or animals.
- *       2. Use is non-commercial.
- *       3. Credit is given to the author (i.e. portions © bechter.com), and provide a link to the original source.
  *
  */
 

esp32/include/HomieConfiguration.h

@@ -19,43 +19,53 @@
 #define MAX_PLANTS 7
 
 /**
- * @name Attributes
+ * @name Homie Attributes
  * generated Information
  * @{
  **/
 
-#define NUMBER_TYPE                     "number"
+#define NUMBER_TYPE                     "number"        /**< numberic information, published or read in Homie */
-#define TEMPERATUR_SENSOR_LIPO          "lipo"
+
-#define TEMPERATUR_SENSOR_WATER         "water"
+/**
-#define TEMPERATUR_SENSOR_OUTSIDE       "temp"
+ * @name Temperatur Node
-#define TEMPERATUR_SENSOR_CHIP          "chip"
+ * @{
+ **/
+
 #define TEMPERATURE_NAME                "Temperature"
 #define TEMPERATURE_UNIT                "°C"
+#define TEMPERATUR_SENSOR_LIPO          "lipo"          /**< Homie node: temperatur, setting: lipo temperatur (or close to it) */
+#define TEMPERATUR_SENSOR_CHIP          "chip"          /**< Homie node: temperatur, setting: battery chip */
+#define TEMPERATUR_SENSOR_WATER         "water"         /**< Homie node: temperatur, setting: water temperatur */
+/** @} 
+ *
+ * @name Plant Nodes
+ * @{
+ */
 
 HomieNode plant0("plant0", "Plant 0", "Plant"); /**< dynamic Homie information for first plant */
 HomieNode plant1("plant1", "Plant 1", "Plant"); /**< dynamic Homie information for second plant */
-HomieNode plant2("plant2", "Plant 2", "Plant"); /**< dynamic Homie information for first plant */
+HomieNode plant2("plant2", "Plant 2", "Plant"); /**< dynamic Homie information for third plant */
-HomieNode plant3("plant3", "Plant 3", "Plant"); /**< dynamic Homie information for first plant */
+HomieNode plant3("plant3", "Plant 3", "Plant"); /**< dynamic Homie information for fourth plant */
-HomieNode plant4("plant4", "Plant 4", "Plant"); /**< dynamic Homie information for first plant */
+HomieNode plant4("plant4", "Plant 4", "Plant"); /**< dynamic Homie information for fivth plant */
-HomieNode plant5("plant5", "Plant 5", "Plant"); /**< dynamic Homie information for first plant */
+HomieNode plant5("plant5", "Plant 5", "Plant"); /**< dynamic Homie information for sixth plant */
-HomieNode plant6("plant6", "Plant 6", "Plant"); /**< dynamic Homie information for first plant */
+HomieNode plant6("plant6", "Plant 6", "Plant"); /**< dynamic Homie information for seventh plant */
 
 HomieNode sensorLipo("lipo", "Battery Status", "Lipo");
 HomieNode sensorSolar("solar", "Solar Status", "Solarpanel");
 HomieNode sensorWater("water", "WaterSensor", "Water");
 HomieNode sensorTemp("temperature", "Temperature", "temperature");
-HomieNode startupReason("startupReason", "startupReason", "startupReason");
 HomieNode stayAlive("stay", "alive", "alive");  /**< Necessary for Mqtt Active Command */
 
-/* @} */
+/**
+ *  @} 
+ */
 
 /**
  * @name Settings
  * General settings for the controller
  * @{
  */
-HomieSetting<long> maxTimeBetweenMQTTUpdates("mqttSleep", "time in seconds to start into mode2");
+HomieSetting<long> deepSleepTime("deepsleep", "time in seconds to sleep");
-HomieSetting<long> deepSleepTime("deepsleep", "time in seconds to sleep (0 deactivats it)");
 HomieSetting<long> deepSleepNightTime("nightsleep", "time in seconds to sleep (0 uses same setting: deepsleep at night, too)");
 HomieSetting<long> wateringDeepSleep("pumpdeepsleep", "time seconds to sleep, while a pump is running");
 
@@ -63,12 +73,12 @@ HomieSetting<long> waterLevelMax("watermaxlevel", "distance (mm) at maximum wate
 HomieSetting<long> waterLevelMin("waterminlevel", "distance (mm) at minimum water level (pumps still covered)");
 HomieSetting<long> waterLevelWarn("waterlevelwarn", "warn (mm) if below this water level %");
 HomieSetting<long> waterLevelVol("waterVolume", "(ml) between minimum and maximum");
-HomieSetting<long> lipoSensorIndex("lipoTempIndex", "index onwire bus for lipo temperature sensor");
+HomieSetting<const char *> lipoSensorAddr("lipoTempAddr", "1wire address for lipo temperature sensor");
-HomieSetting<long> waterSensorIndex("waterTempIndex", "index onwire bus for water temperature sensor");
+HomieSetting<const char *> waterSensorAddr("waterTempIndex", "1wire address for water temperature sensor");
 HomieSetting<const char *> ntpServer("ntpServer", "NTP server (pool.ntp.org as default)");
 
 /**
- *@}
+ * @}
  */
 
 /** 

esp32/src/main.cpp

@@ -46,15 +46,11 @@ int readTemp();
 ******************************************************************************/
 
 //only relevant if mode2 did start pumping before
-RTC_DATA_ATTR int lastPumpRunning = 0;
+RTC_DATA_ATTR int lastPumpRunning = 0;    /**< store last successfully waterd plant */
-RTC_DATA_ATTR long lastWaterValue = 0;
+RTC_DATA_ATTR long lastWaterValue = 0;    /**< to calculate the used water per plant */
 
 RTC_DATA_ATTR int gBootCount = 0;
 
-//FIXME use -1 and configure properly
-RTC_DATA_ATTR int rtcLipoTempIndex = 0;
-RTC_DATA_ATTR int rtcWaterTempIndex = -1;
-
 /******************************************************************************
  *                            LOCAL VARIABLES
 ******************************************************************************/
@@ -196,9 +192,6 @@ void mode2MQTT()
   sensorLipo.setProperty("CCA").send(String(battery.getCCA()));
   sensorSolar.setProperty("volt").send(String(mSolarVoltage));
 
-  rtcLipoTempIndex = lipoSensorIndex.get();
-  rtcWaterTempIndex = waterSensorIndex.get();
-
   sensorTemp.setProperty(TEMPERATUR_SENSOR_LIPO).send(String(mTempLipo));
   Serial << "Lipo Temperatur " << mTempLipo << " °C " << endl;
 
@@ -310,12 +303,7 @@ void readSensors()
   for (int i = 0; i < sensorCount; i++) {
     float temp = sensors.getTempCByIndex(i);
     Serial << "OneWire sensor " << i << " has value " << temp << endl;
-    if (rtcWaterTempIndex != -1 && rtcWaterTempIndex == i) {
+    /** FIXME: handle via address */
-      mTempWater = temp;
-    }
-    if (rtcLipoTempIndex != -1 && rtcLipoTempIndex == i) {
-      mTempLipo = temp;
-    }
   }
 
   // Update battery chip data
@@ -467,8 +455,9 @@ void systemInit()
   // Set default values
 
   //in seconds
-  maxTimeBetweenMQTTUpdates.setDefaultValue(700);
+  deepSleepTime.setDefaultValue(600).setValidator([] (long candidate) {
-  deepSleepTime.setDefaultValue(600);
+    return (candidate > 0) && (candidate < (60 * 60 * 2) /** 2h max sleep */ );
+  });
   deepSleepNightTime.setDefaultValue(600);
   wateringDeepSleep.setDefaultValue(5);
   ntpServer.setDefaultValue("pool.ntp.org");
@@ -477,8 +466,8 @@ void systemInit()
   waterLevelMin.setDefaultValue(50);   /* 5cm in mm */
   waterLevelWarn.setDefaultValue(500); /* 50cm in mm */
   waterLevelVol.setDefaultValue(5000); /* 5l in ml */
-  lipoSensorIndex.setDefaultValue(0);
+  lipoSensorAddr.setDefaultValue("");
-  waterSensorIndex.setDefaultValue(-1);
+  waterSensorAddr.setDefaultValue("");
   Homie.setLoopFunction(homieLoop);
   Homie.onEvent(onHomieEvent);
   //Homie.disableLogging();
@@ -522,7 +511,6 @@ void systemInit()
         .setDatatype(NUMBER_TYPE)
         .setUnit("V");
     sensorWater.advertise("remaining").setDatatype(NUMBER_TYPE).setUnit("%");
-    startupReason.advertise("startupReason").setDatatype(NUMBER_TYPE).setUnit("Enum");
   }
   stayAlive.advertise("alive").setName("Alive").setDatatype(NUMBER_TYPE).settable(aliveHandler);
 }