pump refactor round 1

esp32/include/ControllerConfiguration.h

@@ -82,12 +82,12 @@
 /** \addtogroup Configuration
  *  @{
  */
-#define FIRMWARE_VERSION "sw 2.0 hw 0.10b"
+#define FIRMWARE_VERSION "sw 2.1 hw 0.10b"
 
 #define TIMED_LIGHT_PIN CUSTOM1_PIN5
-//#define FLOWMETER_PIN CUSTOM1_PIN1
+#define FLOWMETER_PIN CUSTOM1_PIN1
 #ifdef FLOWMETER_PIN
-    #define FLOWMETER_FLOWFACTOR 22 /** F = 22 * Q;Q = L/min */
+    #define FLOWMETER_FLOWFACTOR 23 /** F = 22 * Q;Q = L/min */
 #endif
 
 #define MOIST_SENSOR_MAX_FRQ               60000 // 60kHz (500Hz margin)

esp32/include/HomieConfiguration.h

@@ -105,9 +105,10 @@ HomieSetting<const char *> ntpServer("ntpServer", "NTP server (pool.ntp.org as d
         HomieSetting<long> mPumpAllowedHourRangeEnd##plant = HomieSetting<long>("hourend" strplant, "Plant" strplant " - Range pump allowed hour end (0-23)");                                            \
         HomieSetting<bool> mPumpOnlyWhenLowLight##plant = HomieSetting<bool>("lowLight" strplant, "Plant" strplant " - Enable the Pump only, when there is no sunlight"); \
         HomieSetting<long> mPumpCooldownInMinutes##plant = HomieSetting<long>("delay" strplant, "Plant" strplant " - How long to wait until the pump is activated again (minutes)");                      \
-        HomieSetting<long> pPumpDuration##plant = HomieSetting<long>("pumpDuration" strplant, "Plant" strplant " - time seconds or ml (if using flowmeter) to water when pump is active");                      \
+        HomieSetting<long> pPumpDuration##plant = HomieSetting<long>("pumpDuration" strplant, "Plant" strplant " - time seconds to water when pump is active");                      \
+        HomieSetting<long> pPumpMl##plant = HomieSetting<long>("pumpAmount" strplant, "Plant" strplant " - ml (if using flowmeter) to water when pump is active");                      \
         HomieSetting<long> pPowerLevel##plant = HomieSetting<long>("powerLevel" strplant, "Plant" strplant " - pwm duty cycle in percent");                      \
-        PlantSettings_t mSetting##plant = {&mSensorDry##plant, &mPumpAllowedHourRangeStart##plant, &mPumpAllowedHourRangeEnd##plant, &mPumpOnlyWhenLowLight##plant, &mPumpCooldownInMinutes##plant, &pPumpDuration##plant, &pPowerLevel##plant}; \
+        PlantSettings_t mSetting##plant = {&mSensorDry##plant, &mPumpAllowedHourRangeStart##plant, &mPumpAllowedHourRangeEnd##plant, &mPumpOnlyWhenLowLight##plant, &mPumpCooldownInMinutes##plant, &pPumpDuration##plant, &pPowerLevel##plant, &pPumpMl##plant}; \
         /**< Generate all settings for one plant \
          * \
          * Feature to start pumping only at morning: @link{SOLAR_CHARGE_MIN_VOLTAGE} and @link{SOLAR_CHARGE_MAX_VOLTAGE} \

esp32/include/HomieTypes.h

@@ -29,6 +29,7 @@ typedef struct PlantSettings_t
     HomieSetting<long> *pPumpCooldownInSeconds;
     HomieSetting<long> *pPumpDuration;
     HomieSetting<long> *pPumpPowerLevel;
+    HomieSetting<long> *pPumpMl;
 } PlantSettings_t;
 
 #endif

esp32/src/main.cpp

@@ -80,6 +80,7 @@ unsigned long setupFinishedTimestamp;
 
 bool pumpStarted = false;
 long pumpTarget = -1;
+long lastSendPumpUpdate = 0;
 #ifdef FLOWMETER_PIN
 long pumpTargetMl = -1;
 #endif
@@ -568,10 +569,10 @@ void initPumpLogic()
 
   pcnt_counter_clear(unit); // Zera o contador PCNT
   pcnt_counter_resume(unit);
-#else
+#endif
   pumpTarget = millis() + (mPlants[pumpToRun].getPumpDuration() * 1000);
   log(LOG_LEVEL_INFO, "Starting pump " + String(pumpToRun) + " for " + String(mPlants[pumpToRun].getPumpDuration()) + "s", LOG_PUMP_STARTED_CODE);
-#endif
+
   //enable power
   WRITE_PERI_REG(RTC_CNTL_BROWN_OUT_REG, 0);
   digitalWrite(OUTPUT_ENABLE_PUMP, HIGH);
@@ -592,6 +593,13 @@ void pumpActiveLoop()
     rtcLastWateringPlant[pumpToRun] = getCurrentTime();
   }
 
+  bool mqttUpdateTick = false;
+  if (lastSendPumpUpdate + 1000 < millis())
+  {
+    lastSendPumpUpdate = millis();
+    mqttUpdateTick = true;
+  }
+
 #ifdef FLOWMETER_PIN
   int16_t pulses;
   pcnt_unit_t unit = (pcnt_unit_t)(PCNT_UNIT_7);
@@ -612,14 +620,25 @@ void pumpActiveLoop()
     {
       targetReached = true;
       pcnt_counter_pause(unit);
-    }
       mPlants[pumpToRun].setProperty("waterusage").send(String(pumped));
     }
-#else
+    else if (mqttUpdateTick)
+    {
+      mPlants[pumpToRun].setProperty("waterusage").send(String(pumped));
+    }
+  }
+
+  long duration = pumpTarget - millis();
   if (millis() > pumpTarget)
   {
+    mPlants[pumpToRun].setProperty("watertime").send(String(duration));
     targetReached = true;
   }
+  else if (mqttUpdateTick)
+  {
+    mPlants[pumpToRun].setProperty("watertime").send(String(duration));
+  }
+
 #endif
 
   if (targetReached)