C3MA/PlantCtrl
5
0
Fork 0
Code Issues 8 Pull Requests Packages Projects Releases Wiki Activity

extract rtc module, extract tank module, fix backupview refresh, switch to embedded storage for eeprom

Browse Source
This commit is contained in:
Empire Phoenix
2025-06-25 01:18:36 +02:00
parent 5fb8705d9a
commit 6b711e29fc
14 changed files with 851 additions and 869 deletions
Download Patch File Download Diff File Expand all files Collapse all files

130
rust/src/hal/v4_hal.rs
View File

@@ -2,33 +2,26 @@ use crate::config::PlantControllerConfig;
use crate::hal::battery::BatteryInteraction;
use crate::hal::esp::Esp;
use crate::hal::rtc::RTCModuleInteraction;
use crate::hal::water::TankSensor;
use crate::hal::{
deep_sleep, BoardInteraction, FreePeripherals, Sensor, I2C_DRIVER, PLANT_COUNT,
REPEAT_MOIST_MEASURE, TANK_MULTI_SAMPLE,
REPEAT_MOIST_MEASURE,
};
use crate::log::{log, LogMessage};
use anyhow::{anyhow, bail};
use ds18b20::Ds18b20;
use ds323x::{DateTimeAccess, Ds323x};
use eeprom24x::{Eeprom24x, SlaveAddr};
use embedded_hal::digital::OutputPin;
use embedded_hal_bus::i2c::MutexDevice;
use esp_idf_hal::adc::oneshot::config::AdcChannelConfig;
use esp_idf_hal::adc::oneshot::{AdcChannelDriver, AdcDriver};
use esp_idf_hal::adc::{attenuation, Resolution};
use esp_idf_hal::delay::Delay;
use esp_idf_hal::gpio::{AnyInputPin, Gpio5, IOPin, InputOutput, Output, PinDriver, Pull};
use esp_idf_hal::gpio::{AnyInputPin, IOPin, InputOutput, Output, PinDriver, Pull};
use esp_idf_hal::i2c::I2cDriver;
use esp_idf_hal::pcnt::{
PcntChannel, PcntChannelConfig, PcntControlMode, PcntCountMode, PcntDriver, PinIndex,
};
use esp_idf_sys::{gpio_hold_dis, gpio_hold_en, EspError};
use esp_idf_sys::{gpio_hold_dis, gpio_hold_en};
use ina219::address::{Address, Pin};
use ina219::calibration::UnCalibrated;
use ina219::configuration::{Configuration, OperatingMode};
use ina219::SyncIna219;
use measurements::{Current, Resistance, Voltage};
use one_wire_bus::OneWire;
use pca9535::{GPIOBank, Pca9535Immediate, StandardExpanderInterface};
use std::result::Result::Ok as OkStd;
@@ -110,16 +103,14 @@ impl Charger<'_> {
pub struct V4<'a> {
esp: Esp<'a>,
tank_sensor: TankSensor<'a>,
charger: Charger<'a>,
rtc_module: Box<dyn RTCModuleInteraction + Send>,
battery_monitor: Box<dyn BatteryInteraction + Send>,
config: PlantControllerConfig,
tank_channel: AdcChannelDriver<'a, Gpio5, AdcDriver<'a, esp_idf_hal::adc::ADC1>>,
signal_counter: PcntDriver<'a>,
awake: PinDriver<'a, esp_idf_hal::gpio::AnyIOPin, Output>,
light: PinDriver<'a, esp_idf_hal::gpio::AnyIOPin, InputOutput>,
tank_power: PinDriver<'a, esp_idf_hal::gpio::AnyIOPin, InputOutput>,
one_wire_bus: OneWire<PinDriver<'a, esp_idf_hal::gpio::AnyIOPin, InputOutput>>,
general_fault: PinDriver<'a, esp_idf_hal::gpio::AnyIOPin, InputOutput>,
pump_expander: Pca9535Immediate<MutexDevice<'a, I2cDriver<'a>>>,
sensor_expander: Pca9535Immediate<MutexDevice<'a, I2cDriver<'a>>>,
@@ -141,46 +132,21 @@ pub(crate) fn create_v4(
general_fault.set_pull(Pull::Floating)?;
general_fault.set_low()?;
println!("Init rtc driver");
let mut rtc = Ds323x::new_ds3231(MutexDevice::new(&I2C_DRIVER));
println!("Init rtc eeprom driver");
let mut eeprom = {
Eeprom24x::new_24x32(
MutexDevice::new(&I2C_DRIVER),
SlaveAddr::Alternative(true, true, true),
)
};
let mut extra1 = PinDriver::output(peripherals.gpio6.downgrade())?;
extra1.set_high()?;
extra1.set_low()?;
let mut extra2 = PinDriver::output(peripherals.gpio15.downgrade())?;
extra2.set_high()?;
extra2.set_low()?;
let mut one_wire_pin = PinDriver::input_output_od(peripherals.gpio18.downgrade())?;
one_wire_pin.set_pull(Pull::Floating)?;
let one_wire_pin = peripherals.gpio18.downgrade();
let tank_power_pin = peripherals.gpio11.downgrade();
let one_wire_bus = OneWire::new(one_wire_pin)
.map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;
let rtc_time = rtc.datetime();
match rtc_time {
OkStd(tt) => {
println!("Rtc Module reports time at UTC {}", tt);
}
Err(err) => {
println!("Rtc Module could not be read {:?}", err);
}
}
match eeprom.read_byte(0) {
OkStd(byte) => {
println!("Read first byte with status {}", byte);
}
Err(err) => {
println!("Eeprom could not read first byte {:?}", err);
}
}
let tank_sensor = TankSensor::create(
one_wire_pin,
peripherals.adc1,
peripherals.gpio5,
tank_power_pin,
);
let mut signal_counter = PcntDriver::new(
peripherals.pcnt0,
@@ -204,28 +170,15 @@ pub(crate) fn create_v4(
},
)?;
let adc_config = AdcChannelConfig {
attenuation: attenuation::DB_11,
resolution: Resolution::Resolution12Bit,
calibration: esp_idf_hal::adc::oneshot::config::Calibration::Curve,
};
let tank_driver = AdcDriver::new(peripherals.adc1)?;
let tank_channel: AdcChannelDriver<Gpio5, AdcDriver<esp_idf_hal::adc::ADC1>> =
AdcChannelDriver::new(tank_driver, peripherals.gpio5, &adc_config)?;
let mut solar_is_day = PinDriver::input(peripherals.gpio7.downgrade())?;
solar_is_day.set_pull(Pull::Floating)?;
let mut light = PinDriver::input_output(peripherals.gpio10.downgrade())?;
light.set_pull(Pull::Floating)?;
let mut tank_power = PinDriver::input_output(peripherals.gpio11.downgrade())?;
tank_power.set_pull(Pull::Floating)?;
let mut charge_indicator = PinDriver::input_output(peripherals.gpio3.downgrade())?;
charge_indicator.set_pull(Pull::Floating)?;
charge_indicator.set_low()?;
let mut pump_expander = Pca9535Immediate::new(MutexDevice::new(&I2C_DRIVER), 32);
//todo error handing if init error
for pin in 0..8 {
@@ -276,11 +229,9 @@ pub(crate) fn create_v4(
rtc_module,
esp,
awake,
tank_channel,
tank_sensor,
signal_counter,
light,
tank_power,
one_wire_bus,
general_fault,
pump_expander,
sensor_expander,
@@ -294,6 +245,10 @@ pub(crate) fn create_v4(
}
impl<'a> BoardInteraction<'a> for V4<'a> {
fn get_tank_sensor(&mut self) -> Option<&mut TankSensor<'a>> {
Some(&mut self.tank_sensor)
}
fn get_esp(&mut self) -> &mut Esp<'a> {
&mut self.esp
}
@@ -324,51 +279,6 @@ impl<'a> BoardInteraction<'a> for V4<'a> {
self.charger.is_day()
}
fn water_temperature_c(&mut self) -> anyhow::Result<f32> {
self.one_wire_bus
.reset(&mut self.esp.delay)
.map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;
let first = self.one_wire_bus.devices(false, &mut self.esp.delay).next();
if first.is_none() {
bail!("Not found any one wire Ds18b20");
}
let device_address = first
.unwrap()
.map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;
let water_temp_sensor = Ds18b20::new::<EspError>(device_address)
.map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;
water_temp_sensor
.start_temp_measurement(&mut self.one_wire_bus, &mut self.esp.delay)
.map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;
ds18b20::Resolution::Bits12.delay_for_measurement_time(&mut self.esp.delay);
let sensor_data = water_temp_sensor
.read_data(&mut self.one_wire_bus, &mut self.esp.delay)
.map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;
if sensor_data.temperature == 85_f32 {
bail!("Ds18b20 dummy temperature returned");
}
anyhow::Ok(sensor_data.temperature / 10_f32)
}
fn tank_sensor_voltage(&mut self) -> anyhow::Result<f32> {
self.tank_power.set_high()?;
//let stabilize
self.esp.delay.delay_ms(100);
let mut store = [0_u16; TANK_MULTI_SAMPLE];
for multisample in 0..TANK_MULTI_SAMPLE {
let value = self.tank_channel.read()?;
store[multisample] = value;
}
self.tank_power.set_low()?;
store.sort();
let median_mv = store[6] as f32 / 1000_f32;
anyhow::Ok(median_mv)
}
fn light(&mut self, enable: bool) -> anyhow::Result<()> {
unsafe { gpio_hold_dis(self.light.pin()) };
self.light.set_state(enable.into())?;