initial config changes

This commit is contained in:
Empire 2023-12-22 01:35:08 +01:00
parent 066b3ec24f
commit 58801f870e
11 changed files with 653 additions and 253 deletions

View File

@ -3,7 +3,6 @@ target = "xtensa-esp32-espidf"
[target.xtensa-esp32-espidf]
linker = "ldproxy"
# runner = "espflash --monitor --baud 921600" # Select this runner for espflash v1.x.x
runner = "espflash flash --monitor --baud 921600 --partition-table partitions.csv" # Select this runner for espflash v2.x.x
# runner = "cargo runner"
rustflags = [ "--cfg", "espidf_time64"] # Extending time_t for ESP IDF 5: https://github.com/esp-rs/rust/issues/110

View File

@ -58,7 +58,7 @@ log = { version = "0.4", default-features = false }
esp-idf-svc = { version = "0.47.3", default-features = false }
serde = { version = "1.0.192", features = ["derive"] }
average = { version = "0.14.1" , features = ["std"] }
esp32 = "0.27.0"
#esp32 = "0.28.0"
bit_field = "0.10.2"
ds18b20 = "0.1.1"
embedded-svc = { version = "0.26.4", features = ["experimental"] }
@ -69,7 +69,7 @@ esp_idf_build = "0.1.3"
chrono = { version = "0.4.23", default-features = false , features = ["iana-time-zone"] }
chrono-tz = {version="0.8.0", default-features = false , features = [ "filter-by-regex" ]}
embedded-hal = "0.2.7"
shift-register-driver = "0.1.1"
#shift-register-driver = "0.1.1"
one-wire-bus = "0.1.1"
anyhow = { version = "1.0.75", features = ["std", "backtrace"] }
schemars = "0.8.16"

4
rust/src/lib.rs Normal file
View File

@ -0,0 +1,4 @@
#![allow(dead_code)]
extern crate embedded_hal as hal;
pub mod sipo;

View File

@ -1,23 +1,15 @@
use std::{
ffi::CString,
fs::File,
io::{Read, Write},
mem,
str::from_utf8,
};
use std::{sync::{Arc, Mutex}, env};
use chrono::{Datelike, NaiveDateTime, Timelike};
use anyhow::{Context, Result};
use anyhow::Result;
use chrono_tz::Europe::Berlin;
use esp_idf_hal::delay::Delay;
use esp_idf_svc::http::server::EspHttpServer;
use esp_idf_sys::{esp_restart, vTaskDelay, TickType_t};
use heapless::String;
use esp_idf_sys::{esp_restart, vTaskDelay};
use plant_hal::{CreatePlantHal, PlantCtrlBoard, PlantCtrlBoardInteraction, PlantHal, PLANT_COUNT};
use webserver::webserver::httpd;
use crate::config::{Config, WifiConfig};
use crate::{config::{Config, WifiConfig}, webserver::webserver::httpd_initial};
mod config;
pub mod plant_hal;
mod webserver {
@ -33,14 +25,30 @@ enum OnlineMode {
MqttRoundtrip
}
fn wait_infinity(board: &mut PlantCtrlBoard<'_>) {
enum WaitType{
InitialConfig,
FlashError
}
fn wait_infinity(board_access: Arc<Mutex<PlantCtrlBoard<'_>>>, wait_type:WaitType) -> !{
let delay = match wait_type {
WaitType::InitialConfig => 250_u32,
WaitType::FlashError => 100_u32,
};
board_access.lock().unwrap().light(true);
loop {
unsafe {
//do not trigger watchdog
board.general_fault(true);
vTaskDelay(500_u32);
board.general_fault(false);
vTaskDelay(500_u32);
for i in 0..7 {
board_access.lock().unwrap().fault(i, true);
}
board_access.lock().unwrap().general_fault(true);
vTaskDelay(delay);
board_access.lock().unwrap().general_fault(false);
for i in 0..7 {
board_access.lock().unwrap().fault(i, false);
}
vTaskDelay(delay);
}
}
}
@ -59,7 +67,8 @@ fn main() -> Result<()> {
println!("Version useing git has {}", git_hash);
println!("Board hal init");
let mut board = PlantHal::create()?;
let board_access = PlantHal::create()?;
let mut board = board_access.lock().unwrap();
println!("Mounting filesystem");
board.mountFileSystem()?;
let free_space = board.fileSystemSize()?;
@ -103,7 +112,7 @@ fn main() -> Result<()> {
Err(err) => {
println!("Could not remove config files, system borked {}", err);
//terminate main app and freeze
wait_infinity(&mut board);
wait_infinity( board_access.clone(), WaitType::FlashError);
}
}
}
@ -118,12 +127,11 @@ fn main() -> Result<()> {
},
Err(err) => {
println!("Missing wifi config, entering initial config mode {}", err);
board.wifi_ap().unwrap();
//config upload will trigger reboot!
let _webserver = httpd(true);
wait_infinity(&mut board);
//how to do this better?
let ssid: String<32> = String::try_from("").unwrap();
wifi = WifiConfig { ssid : ssid, password : None};
drop(board);
let _webserver = httpd_initial(board_access.clone());
wait_infinity(board_access.clone(), WaitType::InitialConfig);
},
};
@ -195,10 +203,10 @@ fn main() -> Result<()> {
println!("Running logic at europe/berlin {}", europe_time);
}
if(online_mode == OnlineMode::SnTp){
if online_mode == OnlineMode::SnTp {
//mqtt here
}
if(online_mode == OnlineMode::Mqtt){
if online_mode == OnlineMode::Mqtt {
//mqtt roundtrip here
}
//TODO configmode webserver logic here

View File

@ -1,35 +1,42 @@
//mod config;
use embedded_svc::wifi::{Configuration, ClientConfiguration, AuthMethod, Wifi};
use embedded_hal::blocking::delay::DelayMs;
use embedded_svc::wifi::{
AccessPointConfiguration, AuthMethod, ClientConfiguration, Configuration, Wifi, AccessPointInfo,
};
use esp_idf_svc::eventloop::EspSystemEventLoop;
use esp_idf_svc::nvs::EspDefaultNvsPartition;
use esp_idf_svc::wifi::EspWifi;
use esp_idf_svc::wifi::config::{ScanConfig, ScanType};
use esp_idf_svc::wifi::{EspWifi, NonBlocking};
use plant_ctrl2::sipo::ShiftRegister40;
use anyhow::anyhow;
use anyhow::{bail, Context, Ok, Result};
use std::ffi::CString;
use std::fs::File;
use std::io::{Read, BufReader};
use std::io::{BufReader, Read};
use std::path::Path;
use std::str::from_utf8;
use std::sync::Mutex;
use anyhow::{Context, Result, bail, Ok};
use anyhow::anyhow;
use std::sync::{Mutex, Arc};
use std::time::Duration;
use chrono::{Utc, NaiveDateTime, DateTime};
use chrono::{DateTime, NaiveDateTime, Utc};
use ds18b20::Ds18b20;
use embedded_hal::digital::v1_compat::OldOutputPin;
use embedded_hal::digital::v2::OutputPin;
use esp_idf_hal::adc::config::Config;
use esp_idf_hal::adc::{AdcDriver, AdcChannelDriver, attenuation};
use esp_idf_hal::adc::{attenuation, AdcChannelDriver, AdcDriver};
use esp_idf_hal::delay::{Delay, FreeRtos};
use esp_idf_hal::pcnt::{PcntDriver, PcntChannel, PinIndex, PcntChannelConfig, PcntControlMode, PcntCountMode};
use esp_idf_hal::gpio::{AnyInputPin, Gpio39, Gpio4, Level, PinDriver};
use esp_idf_hal::pcnt::{
PcntChannel, PcntChannelConfig, PcntControlMode, PcntCountMode, PcntDriver, PinIndex,
};
use esp_idf_hal::prelude::Peripherals;
use esp_idf_hal::reset::ResetReason;
use esp_idf_svc::sntp::{self, SyncStatus};
use esp_idf_svc::systime::EspSystemTime;
use esp_idf_sys::EspError;
use esp_idf_sys::{vTaskDelay, EspError};
use one_wire_bus::OneWire;
use shift_register_driver::sipo::ShiftRegister40;
use esp_idf_hal::gpio::{PinDriver, Gpio39, Gpio4, AnyInputPin, Level};
use esp_idf_hal::prelude::Peripherals;
use serde::{Deserialize, Serialize};
use crate::config::{self, WifiConfig};
@ -46,7 +53,6 @@ const SPIFFS_PARTITION_NAME: &str = "storage";
const WIFI_CONFIG_FILE: &str = "/spiffs/wifi.cfg";
const CONFIG_FILE: &str = "/spiffs/config.cfg";
#[link_section = ".rtc.data"]
static mut LAST_WATERING_TIMESTAMP: [i64; PLANT_COUNT] = [0; PLANT_COUNT];
#[link_section = ".rtc.data"]
@ -54,7 +60,6 @@ static mut CONSECUTIVE_WATERING_PLANT: [u32; PLANT_COUNT] = [0; PLANT_COUNT];
#[link_section = ".rtc.data"]
static mut LOW_VOLTAGE_DETECTED: bool = false;
pub struct BatteryState {
state_charge_percent: u8,
max_error_percent: u8,
@ -68,20 +73,20 @@ pub struct BatteryState {
average_time_to_full_minute: u16,
average_discharge_power_cycle_milli_watt: u16,
cycle_count: u16,
state_health_percent: u8
state_health_percent: u8,
}
pub struct FileSystemSizeInfo {
pub total_size: usize,
pub used_size: usize,
pub free_size: usize
pub free_size: usize,
}
#[derive(Debug)]
pub enum Sensor {
A,
B,
PUMP
PUMP,
}
pub trait PlantCtrlBoardInteraction {
fn time(&mut self) -> Result<chrono::DateTime<Utc>>;
@ -94,12 +99,12 @@ pub trait PlantCtrlBoardInteraction{
fn general_fault(&mut self, enable: bool);
fn is_day(&self,) -> bool;
fn water_temperature_c(&mut self,) -> Result<f32>;
fn tank_sensor_mv(&mut self,) -> Result<u16>;
fn is_day(&self) -> bool;
fn water_temperature_c(&mut self) -> Result<f32>;
fn tank_sensor_mv(&mut self) -> Result<u16>;
fn set_low_voltage_in_cycle(&mut self,);
fn clear_low_voltage_in_cycle(&mut self,);
fn set_low_voltage_in_cycle(&mut self);
fn clear_low_voltage_in_cycle(&mut self);
fn low_voltage_in_cycle(&mut self) -> bool;
fn any_pump(&mut self, enabled: bool) -> Result<()>;
@ -122,25 +127,54 @@ pub trait PlantCtrlBoardInteraction{
fn get_config(&mut self) -> Result<config::Config>;
fn get_wifi(&mut self) -> Result<config::WifiConfig>;
fn set_wifi(&mut self, wifi: &WifiConfig) -> Result<()>;
fn wifi_ap(&mut self) -> Result<()>;
fn wifi_scan(&mut self) -> Result<Vec<AccessPointInfo>>;
}
pub trait CreatePlantHal<'a> {
fn create()-> Result<PlantCtrlBoard<'static>>;
fn create() -> Result<Arc<Mutex<PlantCtrlBoard<'static>>>>;
}
pub struct PlantHal {
}
pub struct PlantHal {}
impl CreatePlantHal<'_> for PlantHal {
fn create() -> Result<PlantCtrlBoard<'static>> {
fn create() -> Result<Arc<Mutex<PlantCtrlBoard<'static>>>> {
let peripherals = Peripherals::take()?;
let clock = OldOutputPin::from(PinDriver::output(peripherals.pins.gpio21)?);
let latch = OldOutputPin::from(PinDriver::output(peripherals.pins.gpio22)?);
let data = OldOutputPin::from(PinDriver::output(peripherals.pins.gpio19)?);
let mut clock = PinDriver::output(peripherals.pins.gpio21)?;
let mut latch = PinDriver::output(peripherals.pins.gpio22)?;
let mut data = PinDriver::output(peripherals.pins.gpio19)?;
// loop {
// unsafe {
// let delay = Delay::new_default();
// latch.set_low().unwrap();
// delay.delay_ms(1);
// for i in 1..2 {
// data.set_high().unwrap();
// delay.delay_ms(1);
// clock.set_high().unwrap();
// delay.delay_ms(1);
// clock.set_low().unwrap();
// delay.delay_ms(1);
// }
// latch.set_high().unwrap();
// latch.set_low().unwrap();
// delay.delay_ms(1);
// for i in 1..2 {
// data.set_low().unwrap();
// delay.delay_ms(1);
// clock.set_high().unwrap();
// delay.delay_ms(1);
// clock.set_low().unwrap();
// delay.delay_ms(1);
// }
// latch.set_high().unwrap();
// vTaskDelay(5);
// }
// }
let one_wire_pin = PinDriver::input_output_od(peripherals.pins.gpio4)?;
//TODO make to none if not possible to init
@ -201,35 +235,33 @@ impl CreatePlantHal<'_> for PlantHal{
counter_unit1.set_filter_value(1023)?;
counter_unit1.filter_enable()?;
println!("Wifi start");
let sys_loop = EspSystemEventLoop::take()?;
let nvs = EspDefaultNvsPartition::take()?;
let wifi_driver = EspWifi::new(
peripherals.modem,
sys_loop,
Some(nvs)
)?;
let wifi_driver = EspWifi::new(peripherals.modem, sys_loop, Some(nvs))?;
let shift_register = ShiftRegister40::new(clock, latch, data);
let last_watering_timestamp = Mutex::new(unsafe { LAST_WATERING_TIMESTAMP });
let consecutive_watering_plant = Mutex::new(unsafe { CONSECUTIVE_WATERING_PLANT });
let low_voltage_detected = Mutex::new(unsafe { LOW_VOLTAGE_DETECTED });
let tank_driver = AdcDriver::new(peripherals.adc1, &Config::new())?;
let tank_channel: AdcChannelDriver<'_, {attenuation::DB_11}, Gpio39> = AdcChannelDriver::new(peripherals.pins.gpio39)?;
let tank_channel: AdcChannelDriver<'_, { attenuation::DB_11 }, Gpio39> =
AdcChannelDriver::new(peripherals.pins.gpio39)?;
let solar_is_day = PinDriver::input(peripherals.pins.gpio25)?;
let boot_button = PinDriver::input(peripherals.pins.gpio0)?;
let light = PinDriver::output(peripherals.pins.gpio26)?;
let main_pump = PinDriver::output(peripherals.pins.gpio23)?;
let tank_power = PinDriver::output(peripherals.pins.gpio27)?;
let general_fault = PinDriver::output(peripherals.pins.gpio13)?;
let one_wire_bus = OneWire::new(one_wire_pin).map_err(|err| -> anyhow::Error {anyhow!("Missing attribute: {:?}", err)})?;
let one_wire_bus = OneWire::new(one_wire_pin)
.map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;
println!("After stuff");
return Ok(PlantCtrlBoard {
shift_register : shift_register,
let rv = Arc::new(Mutex::new(PlantCtrlBoard {
//shift_register : shift_register,
last_watering_timestamp: last_watering_timestamp,
consecutive_watering_plant: consecutive_watering_plant,
low_voltage_detected: low_voltage_detected,
@ -243,14 +275,14 @@ impl CreatePlantHal<'_> for PlantHal{
general_fault: general_fault,
one_wire_bus: one_wire_bus,
signal_counter: counter_unit1,
wifi_driver : wifi_driver
});
wifi_driver: wifi_driver,
}));
return Ok(rv);
}
}
pub struct PlantCtrlBoard<'a> {
shift_register: ShiftRegister40<OldOutputPin<PinDriver<'a, esp_idf_hal::gpio::Gpio21, esp_idf_hal::gpio::Output>>, OldOutputPin<PinDriver<'a, esp_idf_hal::gpio::Gpio22, esp_idf_hal::gpio::Output>>, OldOutputPin<PinDriver<'a, esp_idf_hal::gpio::Gpio19, esp_idf_hal::gpio::Output>>>,
//shift_register: ShiftRegister40<OldOutputPin<PinDriver<'a, esp_idf_hal::gpio::Gpio21, esp_idf_hal::gpio::Output>>, OldOutputPin<PinDriver<'a, esp_idf_hal::gpio::Gpio22, esp_idf_hal::gpio::Output>>, OldOutputPin<PinDriver<'a, esp_idf_hal::gpio::Gpio19, esp_idf_hal::gpio::Output>>>,
consecutive_watering_plant: Mutex<[u32; PLANT_COUNT]>,
last_watering_timestamp: Mutex<[i64; PLANT_COUNT]>,
low_voltage_detected: Mutex<bool>,
@ -268,36 +300,45 @@ pub struct PlantCtrlBoard<'a>{
}
impl PlantCtrlBoardInteraction for PlantCtrlBoard<'_> {
fn battery_state(&mut self,) -> Result<BatteryState> {
fn battery_state(&mut self) -> Result<BatteryState> {
todo!()
}
fn is_day(&self,) -> bool {
fn is_day(&self) -> bool {
return self.solar_is_day.get_level().into();
}
fn water_temperature_c(&mut self,) -> Result<f32> {
fn water_temperature_c(&mut self) -> Result<f32> {
let mut delay = Delay::new_default();
self.one_wire_bus.reset(&mut delay).map_err(|err| -> anyhow::Error {anyhow!("Missing attribute: {:?}", err)})?;
self.one_wire_bus
.reset(&mut delay)
.map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;
let first = self.one_wire_bus.devices(false, &mut delay).next();
if first.is_none() {
bail!("Not found any one wire Ds18b20");
}
let device_address = first.unwrap().map_err(|err| -> anyhow::Error {anyhow!("Missing attribute: {:?}", err)})?;
let device_address = first
.unwrap()
.map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;
let water_temp_sensor = Ds18b20::new::<EspError>(device_address).map_err(|err| -> anyhow::Error {anyhow!("Missing attribute: {:?}", err)})?;
let water_temp_sensor = Ds18b20::new::<EspError>(device_address)
.map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;
water_temp_sensor.start_temp_measurement(&mut self.one_wire_bus, &mut delay).map_err(|err| -> anyhow::Error {anyhow!("Missing attribute: {:?}", err)})?;
water_temp_sensor
.start_temp_measurement(&mut self.one_wire_bus, &mut delay)
.map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;
ds18b20::Resolution::Bits12.delay_for_measurement_time(&mut delay);
let sensor_data = water_temp_sensor.read_data(&mut self.one_wire_bus, &mut delay).map_err(|err| -> anyhow::Error {anyhow!("Missing attribute: {:?}", err)})?;
let sensor_data = water_temp_sensor
.read_data(&mut self.one_wire_bus, &mut delay)
.map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;
if sensor_data.temperature == 85_f32 {
bail!("Ds18b20 dummy temperature returned");
}
return Ok(sensor_data.temperature);
}
fn tank_sensor_mv(&mut self,) -> Result<u16> {
fn tank_sensor_mv(&mut self) -> Result<u16> {
let delay = Delay::new_default();
self.tank_power.set_high()?;
//let stabilize
@ -307,11 +348,11 @@ impl PlantCtrlBoardInteraction for PlantCtrlBoard<'_> {
return Ok(value);
}
fn set_low_voltage_in_cycle(&mut self,) {
fn set_low_voltage_in_cycle(&mut self) {
*self.low_voltage_detected.get_mut().unwrap() = true;
}
fn clear_low_voltage_in_cycle(&mut self,) {
fn clear_low_voltage_in_cycle(&mut self) {
*self.low_voltage_detected.get_mut().unwrap() = false;
}
@ -323,13 +364,14 @@ impl PlantCtrlBoardInteraction for PlantCtrlBoard<'_> {
fn pump(&self, plant: usize, enable: bool) -> Result<()> {
let index = plant * PINS_PER_PLANT + PLANT_PUMP_OFFSET;
//currently infailable error, keep for future as result anyway
self.shift_register.decompose()[index].set_state(enable.into()).unwrap();
//self.shift_register.decompose()[index].set_state(enable.into()).unwrap();
Ok(())
}
fn last_pump_time(&self, plant: usize) -> Result<chrono::DateTime<Utc>> {
let ts = unsafe { LAST_WATERING_TIMESTAMP }[plant];
let timestamp = NaiveDateTime::from_timestamp_millis(ts).ok_or(anyhow!("could not convert timestamp"))?;
let timestamp = NaiveDateTime::from_timestamp_millis(ts)
.ok_or(anyhow!("could not convert timestamp"))?;
return Ok(DateTime::<Utc>::from_naive_utc_and_offset(timestamp, Utc));
}
@ -342,16 +384,16 @@ impl PlantCtrlBoardInteraction for PlantCtrlBoard<'_> {
}
fn consecutive_pump_count(&mut self, plant: usize) -> u32 {
return self.consecutive_watering_plant.get_mut().unwrap()[plant]
return self.consecutive_watering_plant.get_mut().unwrap()[plant];
}
fn fault(&self, plant: usize, enable: bool) {
let index = plant * PINS_PER_PLANT + PLANT_FAULT_OFFSET;
self.shift_register.decompose()[index].set_state(enable.into()).unwrap()
//self.shift_register.decompose()[index].set_state(enable.into()).unwrap()
}
fn low_voltage_in_cycle(&mut self) -> bool {
return *self.low_voltage_detected.get_mut().unwrap()
return *self.low_voltage_detected.get_mut().unwrap();
}
fn any_pump(&mut self, enable: bool) -> Result<()> {
@ -361,7 +403,8 @@ impl PlantCtrlBoardInteraction for PlantCtrlBoard<'_> {
fn time(&mut self) -> Result<chrono::DateTime<Utc>> {
let time = EspSystemTime {}.now().as_millis();
let smaller_time = time as i64;
let local_time = NaiveDateTime::from_timestamp_millis(smaller_time).ok_or(anyhow!("could not convert timestamp"))?;
let local_time = NaiveDateTime::from_timestamp_millis(smaller_time)
.ok_or(anyhow!("could not convert timestamp"))?;
return Ok(local_time.and_utc());
}
@ -395,13 +438,13 @@ impl PlantCtrlBoardInteraction for PlantCtrlBoard<'_> {
let measurement = 100;
let factor = 1000 / 100;
self.shift_register.decompose()[index].set_high().unwrap();
//self.shift_register.decompose()[index].set_high().unwrap();
//give some time to stabilize
delay.delay_ms(10);
self.signal_counter.counter_resume()?;
delay.delay_ms(measurement);
self.signal_counter.counter_pause()?;
self.shift_register.decompose()[index].set_low().unwrap();
//self.shift_register.decompose()[index].set_low().unwrap();
let unscaled = self.signal_counter.get_counter_value()? as i32;
let hz = unscaled * factor;
println!("Measuring {:?} @ {} with {}", sensor, plant, hz);
@ -412,32 +455,49 @@ impl PlantCtrlBoardInteraction for PlantCtrlBoard<'_> {
self.general_fault.set_state(enable.into()).unwrap();
}
fn wifi_ap(&mut self) -> Result<()> {
let apconfig = AccessPointConfiguration {
ssid: "PlantCtrl".into(),
auth_method: AuthMethod::None,
ssid_hidden: false,
..Default::default()
};
let clientconfig = ClientConfiguration::default();
self.wifi_driver.set_configuration(&Configuration::Mixed(clientconfig, apconfig))?;
self.wifi_driver.start()?;
Ok(())
}
fn wifi(&mut self, ssid: &str, password: Option<&str>, max_wait: u32) -> Result<()> {
match password {
Some(pw) => {
//TODO expect error due to invalid pw or similar! //call this during configuration and check if works, revert to config mode if not
self.wifi_driver.set_configuration(&Configuration::Client(ClientConfiguration{
self.wifi_driver.set_configuration(&Configuration::Client(
ClientConfiguration {
ssid: ssid.into(),
password: pw.into(),
..Default::default()
}))?;
},
))?;
}
None => {
self.wifi_driver.set_configuration(&Configuration::Client(ClientConfiguration {
self.wifi_driver
.set_configuration(&Configuration::Client(ClientConfiguration {
ssid: ssid.into(),
auth_method: AuthMethod::None,
..Default::default()
})).unwrap();
},
}))
.unwrap();
}
}
self.wifi_driver.start().unwrap();
self.wifi_driver.connect().unwrap();
self.wifi_driver.start()?;
self.wifi_driver.connect()?;
let delay = Delay::new_default();
let mut counter = 0_u32;
while !self.wifi_driver.is_connected().unwrap(){
let config = self.wifi_driver.get_configuration().unwrap();
while !self.wifi_driver.is_connected()? {
println!("Waiting for station connection");
//TODO blink status?
delay.delay_ms(250);
@ -489,9 +549,17 @@ impl PlantCtrlBoardInteraction for PlantCtrlBoard<'_> {
let mut total_size = 0;
let mut used_size = 0;
unsafe {
esp_idf_sys::esp!(esp_idf_sys::esp_spiffs_info(storage.as_ptr(),&mut total_size,&mut used_size))?;
esp_idf_sys::esp!(esp_idf_sys::esp_spiffs_info(
storage.as_ptr(),
&mut total_size,
&mut used_size
))?;
}
return Ok(FileSystemSizeInfo{total_size, used_size, free_size : total_size - used_size});
return Ok(FileSystemSizeInfo {
total_size,
used_size,
free_size: total_size - used_size,
});
}
fn is_config_reset(&mut self) -> bool {
@ -532,8 +600,24 @@ impl PlantCtrlBoardInteraction for PlantCtrlBoard<'_> {
let read = cfg.read(&mut data)?;
println!("Read file {}", from_utf8(&data[0..read])?);
bail!("todo")
}
fn wifi_scan(&mut self) -> Result<Vec<AccessPointInfo>> {
for i in 1..11 {
println!("Scanning channel {}", i);
self.wifi_driver.start_scan(&ScanConfig{
scan_type : ScanType::Passive(Duration::from_secs(1)),
show_hidden: false,
channel: Some(i),
..Default::default()
}, true)?;
let sr = self.wifi_driver.get_scan_result()?;
for r in sr.iter(){
println!("Found wifi {}", r.ssid);
}
}
return bail!("dummy");
}
}

146
rust/src/sipo.rs Normal file
View File

@ -0,0 +1,146 @@
//! Serial-in parallel-out shift register
use core::cell::RefCell;
use core::mem::{self, MaybeUninit};
use crate::hal::digital::v2::OutputPin;
trait ShiftRegisterInternal {
fn update(&self, index: usize, command: bool) -> Result<(), ()>;
}
/// Output pin of the shift register
pub struct ShiftRegisterPin<'a>
{
shift_register: &'a dyn ShiftRegisterInternal,
index: usize,
}
impl<'a> ShiftRegisterPin<'a>
{
fn new(shift_register: &'a dyn ShiftRegisterInternal, index: usize) -> Self {
ShiftRegisterPin { shift_register, index }
}
}
impl OutputPin for ShiftRegisterPin<'_>
{
type Error = ();
fn set_low(&mut self) -> Result<(), Self::Error> {
self.shift_register.update(self.index, false)?;
Ok(())
}
fn set_high(&mut self) -> Result<(), Self::Error> {
self.shift_register.update(self.index, true)?;
Ok(())
}
}
macro_rules! ShiftRegisterBuilder {
($name: ident, $size: expr) => {
/// Serial-in parallel-out shift register
pub struct $name<Pin1, Pin2, Pin3>
where Pin1: OutputPin,
Pin2: OutputPin,
Pin3: OutputPin
{
clock: RefCell<Pin1>,
latch: RefCell<Pin2>,
data: RefCell<Pin3>,
output_state: RefCell<[bool; $size]>,
}
impl<Pin1, Pin2, Pin3> ShiftRegisterInternal for $name<Pin1, Pin2, Pin3>
where Pin1: OutputPin,
Pin2: OutputPin,
Pin3: OutputPin
{
/// Sets the value of the shift register output at `index` to value `command`
fn update(&self, index: usize, command: bool) -> Result<(), ()>{
self.output_state.borrow_mut()[index] = command;
let output_state = self.output_state.borrow();
self.latch.borrow_mut().set_low().map_err(|_e| ())?;
for i in 1..=output_state.len() {
if output_state[output_state.len() - i] {
self.data.borrow_mut().set_high().map_err(|_e| ())?;
} else {
self.data.borrow_mut().set_low().map_err(|_e| ())?;
}
self.clock.borrow_mut().set_high().map_err(|_e| ())?;
self.clock.borrow_mut().set_low().map_err(|_e| ())?;
}
self.latch.borrow_mut().set_high().map_err(|_e| ())?;
Ok(())
}
}
impl<Pin1, Pin2, Pin3> $name<Pin1, Pin2, Pin3>
where Pin1: OutputPin,
Pin2: OutputPin,
Pin3: OutputPin
{
/// Creates a new SIPO shift register from clock, latch, and data output pins
pub fn new(clock: Pin1, latch: Pin2, data: Pin3) -> Self {
$name {
clock: RefCell::new(clock),
latch: RefCell::new(latch),
data: RefCell::new(data),
output_state: RefCell::new([false; $size]),
}
}
/// Get embedded-hal output pins to control the shift register outputs
pub fn decompose(&self) -> [ShiftRegisterPin; $size] {
// Create an uninitialized array of `MaybeUninit`. The `assume_init` is
// safe because the type we are claiming to have initialized here is a
// bunch of `MaybeUninit`s, which do not require initialization.
let mut pins: [MaybeUninit<ShiftRegisterPin>; $size] = unsafe {
MaybeUninit::uninit().assume_init()
};
// Dropping a `MaybeUninit` does nothing, so if there is a panic during this loop,
// we have a memory leak, but there is no memory safety issue.
for (index, elem) in pins.iter_mut().enumerate() {
elem.write(ShiftRegisterPin::new(self, index));
}
// Everything is initialized. Transmute the array to the
// initialized type.
unsafe { mem::transmute::<_, [ShiftRegisterPin; $size]>(pins) }
}
/// Consume the shift register and return the original clock, latch, and data output pins
pub fn release(self) -> (Pin1, Pin2, Pin3) {
let Self{clock, latch, data, output_state: _} = self;
(clock.into_inner(), latch.into_inner(), data.into_inner())
}
}
}
}
ShiftRegisterBuilder!(ShiftRegister8, 8);
ShiftRegisterBuilder!(ShiftRegister16, 16);
ShiftRegisterBuilder!(ShiftRegister24, 24);
ShiftRegisterBuilder!(ShiftRegister32, 32);
ShiftRegisterBuilder!(ShiftRegister40, 40);
ShiftRegisterBuilder!(ShiftRegister48, 48);
ShiftRegisterBuilder!(ShiftRegister56, 56);
ShiftRegisterBuilder!(ShiftRegister64, 64);
ShiftRegisterBuilder!(ShiftRegister72, 72);
ShiftRegisterBuilder!(ShiftRegister80, 80);
ShiftRegisterBuilder!(ShiftRegister88, 88);
ShiftRegisterBuilder!(ShiftRegister96, 96);
ShiftRegisterBuilder!(ShiftRegister104, 104);
ShiftRegisterBuilder!(ShiftRegister112, 112);
ShiftRegisterBuilder!(ShiftRegister120, 120);
ShiftRegisterBuilder!(ShiftRegister128, 128);
/// 8 output serial-in parallel-out shift register
pub type ShiftRegister<Pin1, Pin2, Pin3> = ShiftRegister8<Pin1, Pin2, Pin3>;

View File

@ -1,7 +1,7 @@
<html>
<meta>
<script src="ota.js"></script>
<script src="jsoneditor.js"></script>
<script src="form.js"></script>
</meta>
<body>
@ -15,58 +15,43 @@
</form>
<h2>config</h2>
<div id="editor_holder" data-theme="html" class="je-ready">
<button id="submit" onclick="createForm()">Create</button>
<div id="configform">
<h3>Tank:</h3>
<div>
<input type="checkbox" id="tank_sensor_enabled" onchange="submitForm()">
Enable Tank Sensor
</div>
<button id="submit">Submit (console.log)</button>
<script>
// Initialize the editor with a JSON schema
var editor = new JSONEditor(document.getElementById('editor_holder'),{
schema: {
type: "object",
title: "Car",
properties: {
make: {
type: "string",
enum: [
"Toyota",
"BMW",
"Honda",
"Ford",
"Chevy",
"VW"
]
},
model: {
type: "string"
},
year: {
type: "integer",
enum: [
1995,1996,1997,1998,1999,
2000,2001,2002,2003,2004,
2005,2006,2007,2008,2009,
2010,2011,2012,2013,2014
],
default: 2008
},
safety: {
type: "integer",
format: "rating",
maximum: "5",
exclusiveMaximum: false,
readonly: false
}
}
}
});
// Hook up the submit button to log to the console
document.getElementById('submit').addEventListener('click',function() {
// Get the value from the editor
console.log(editor.getValue());
});
</script>
<div>
<input type="number" min="2" max="500000" id="tank_full_ml" onchange="submitForm()">
Tank Size mL
</div>
<div>
<input type="number" min="1" max="500000" id="tank_warn_percent" onchange="submitForm()">
Tank Warn below mL
</div>
<h3>Light:</h3>
<div>
Start
<input type="time" id="night_lamp_time_start" onchange="submitForm()">
Stop
<input type="time" id="night_lamp_time_end" onchange="submitForm()">
</div>
<div>
<input type="checkbox" id="night_lamp_only_when_dark" onchange="submitForm()">
Light only when dark
</div>
<h3>Plants:</h3>
<div id="plants"></div>
</div>
<button id="submit" onclick="submitForm()">Submit</button>
<br>
<textarea id="json" cols=50 rows=10></textarea>
</body>
</html>

109
rust/src/webserver/form.js Normal file
View File

@ -0,0 +1,109 @@
var plantcount = 1;
function createForm(){
var current = {}
current.tank_sensor_enabled = true;
current.tank_full_ml = 400;
current.tank_warn_percent = 200;
current.night_lamp_time_start = "18:00";
current.night_lamp_time_end = "02:00";
current.night_lamp_only_when_dark = true;
current.plants = [
{
target_moisture: 40,
pump_time_s:60
}
]
current.plantcount = 1;
plantcount = current.plantcount;
for(i=0;i<plantcount;i++){
var plant = document.createElement("div");
plants.appendChild(plant);
var header = document.createElement("h4");
header.textContent = "Plant " + (i+1);
plant.appendChild(header);
{
var holder = document.createElement("div");
plant.appendChild(holder);
var inputf = document.createElement("input");
inputf.id = "plant_"+i+"_target_moisture";
inputf.onchange = function() {submitForm()};
inputf.type = "number";
inputf.min = 0;
inputf.max = 100;
holder.appendChild(inputf)
var text = document.createElement("span");
holder.appendChild(text)
text.innerHTML += "Target Moisture"
}
{
var holder = document.createElement("div");
plant.appendChild(holder);
var input = document.createElement("input");
input.id = "plant_"+i+"_pump_time_s";
input.onchange = function() {submitForm()};
input.type = "number";
input.min = 0;
input.max = 600;
holder.appendChild(input)
var text = document.createElement("span");
holder.appendChild(text)
text.innerHTML += "Pump Time (s)"
}
}
sync(current);
}
function sync(current){
document.getElementById("tank_full_ml").disabled = !current.tank_sensor_enabled;
document.getElementById("tank_warn_percent").disabled = !current.tank_sensor_enabled;
document.getElementById("tank_sensor_enabled").checked = current.tank_sensor_enabled;
document.getElementById("tank_full_ml").value = current.tank_full_ml;
document.getElementById("tank_warn_percent").value = current.tank_warn_percent;
document.getElementById("night_lamp_time_start").value = current.night_lamp_time_start;
document.getElementById("night_lamp_time_end").value = current.night_lamp_time_end;
document.getElementById("tank_warn_percent").value = current.tank_warn_percent;
for(i=0;i<plantcount;i++){
document.getElementById("plant_"+i+"_target_moisture").value = current.plants[i].target_moisture;
document.getElementById("plant_"+i+"_pump_time_s").value = current.plants[i].pump_time_s;
}
}
function submitForm() {
var current = {}
current.plantcount = plantcount;
current.tank_sensor_enabled = document.getElementById("tank_sensor_enabled").checked;
current.tank_full_ml = document.getElementById("tank_full_ml").value;
current.tank_warn_percent = document.getElementById("tank_warn_percent").value;
current.night_lamp_time_start = document.getElementById("night_lamp_time_start").value;
current.night_lamp_time_end = document.getElementById("night_lamp_time_end").value;
current.night_lamp_only_when_dark = document.getElementById("night_lamp_only_when_dark").checked;
current.plants = []
for(i=0;i<plantcount;i++){
console.log("Adding plant " + i)
current.plants[i] = {}
current.plants[i].target_moisture = document.getElementById("plant_"+i+"_target_moisture").value;
current.plants[i].pump_time_s = document.getElementById("plant_"+i+"_pump_time_s").value;
}
sync(current);
console.log(current);
var pretty = JSON.stringify(current, undefined, 4);
document.getElementById('json').value = pretty;
}

View File

@ -1,6 +1,7 @@
<html>
<meta>
<script src="ota.js"></script>
<script src="wifi.js"></script>
</meta>
<body>
<div>
@ -13,5 +14,17 @@
<p id="loaded_n_total"></p>
</form>
</div>
<div>
<h2>WIFI</h2>
<input type="button" id="scan" onchange="scanWifi()" value="Scan">
<br>
<label for="ssid">SSID:</label>
<input type="text" id="ssid" list="cityname">
<datalist id="cityname">
<option value="Boston">
<option value="Cambridge">
</datalist>
</div>
</body>
</html>

View File

@ -1,23 +1,64 @@
//offer ota and config mode
use std::{vec, sync::{Mutex, Arc}};
use embedded_svc::http::Method;
use esp_idf_svc::http::server::EspHttpServer;
use esp_ota::OtaUpdate;
#[allow(unused_variables)]
pub fn httpd(initial_config:bool) -> EspHttpServer<'static> {
use crate::plant_hal::{PlantCtrlBoard, PlantCtrlBoardInteraction};
let mut server = EspHttpServer::new(&Default::default()).unwrap();
pub fn httpd_initial(board_access:Arc<Mutex<PlantCtrlBoard<'static>>>) -> Box<EspHttpServer<'static>> {
let mut server = shared();
server.fn_handler("/",Method::Get, move |request| {
let mut response = request.into_ok_response()?;
response.write(include_bytes!("initial_config.html"))?;
return Ok(())
}).unwrap();
server.fn_handler("/wifiscan",Method::Get, move |request| {
let mut response = request.into_ok_response()?;
let mut board = board_access.lock().unwrap();
match board.wifi_scan() {
Err(error) => {
response.write(format!("Error scanning wifi: {}", error).as_bytes())?;
},
Ok(scan_result) => {
println!("Scan result is {:?}", scan_result);
response.write("{ ssids:[".as_bytes())?;
let mut first = true;
for ap in scan_result.iter(){
if !first {
response.write(",".as_bytes())?;
}
response.write(ap.ssid.as_bytes())?;
first = false;
}
response.write("]".as_bytes())?;
},
}
return Ok(())
}).unwrap();
return server
}
pub fn httpd(board:&mut Box<PlantCtrlBoard<'static>>) -> Box<EspHttpServer<'static>> {
let mut server = shared();
server
.fn_handler("/",Method::Get, move |request| {
let mut response = request.into_ok_response()?;
match initial_config {
true => response.write(include_bytes!("initial_config.html"))?,
false => response.write(include_bytes!("config.html"))?
};
response.write(include_bytes!("config.html"))?;
return Ok(())
}).unwrap();
return server;
}
pub fn shared() -> Box<EspHttpServer<'static>> {
let mut server = Box::new(EspHttpServer::new(&Default::default()).unwrap());
server
.fn_handler("/version",Method::Get, |request| {
let mut response = request.into_ok_response()?;
@ -78,9 +119,6 @@ pub fn httpd(initial_config:bool) -> EspHttpServer<'static> {
println!("changing boot partition");
finalizer.set_as_boot_partition().unwrap();
finalizer.restart();
//return Ok(())
}).unwrap();
return server;
}

View File

@ -0,0 +1,14 @@
function scanWifi(){
const req = new XMLHttpRequest();
req.addEventListener("progress", updateProgress);
req.addEventListener("load", wifiTransferComplete);
req.addEventListener("error", transferFailed);
req.addEventListener("abort", transferCanceled);
req.open("GET", "/wifiscan");
req.send();
}
function wifiTransferComplete(evt) {
console.log("The transfer is complete.");
}