mqtt now uses more json to reduce message count

rust/src/main.rs

@@ -1,8 +1,13 @@
-use std::sync::{atomic::AtomicBool, Arc, Mutex};
+use std::{
+    fmt::Display,
+    sync::{atomic::AtomicBool, Arc, Mutex},
+};
 
-use chrono::{DateTime, Datelike, TimeDelta, Timelike};
+use anyhow::Result;
+use chrono::{DateTime, Datelike, TimeDelta, Timelike, Utc};
 use chrono_tz::{Europe::Berlin, Tz};
 
+use config::Mode;
 use esp_idf_hal::delay::Delay;
 use esp_idf_sys::{
     esp_deep_sleep, esp_ota_get_app_partition_count, esp_ota_get_running_partition,
@@ -73,7 +78,6 @@ struct PlantState {
     consecutive_pump_count: u32,
     after_p: Option<u8>,
     do_water: bool,
-    frozen: bool,
     dry: bool,
     active: bool,
     pump_error: bool,
@@ -102,6 +106,33 @@ struct TankState {
     sensor_error: bool,
     raw: u16,
 }
+#[derive(Serialize)]
+struct PlantStateMQTT<'a> {
+    a: &'a str,
+    b: &'a str,
+    p_start: &'a str,
+    p_end: &'a str,
+    mode: &'a str,
+    consecutive_pump_count: u32,
+    dry: bool,
+    active: bool,
+    pump_error: bool,
+    not_effective: bool,
+    cooldown: bool,
+    out_of_work_hour: bool,
+    last_pump: &'a str,
+    next_pump: &'a str,
+}
+#[derive(Serialize)]
+struct BatteryState<'a> {
+    voltage_milli_volt: &'a str,
+    current_milli_ampere: &'a str,
+    cycle_count: &'a str,
+    design_milli_ampere: &'a str,
+    remaining_milli_ampere: &'a str,
+    state_of_charge: &'a str,
+    state_of_health: &'a str,
+}
 
 fn safe_main() -> anyhow::Result<()> {
     // It is necessary to call this function once. Otherwise some patches to the runtime
@@ -325,27 +356,14 @@ fn safe_main() -> anyhow::Result<()> {
 
     let tank_state = determine_tank_state(&mut board, &config);
     if online_mode == OnlineMode::Online {
-        if tank_state.sensor_error {
+        match serde_json::to_string(&tank_state) {
-            let _ = board.mqtt_publish(&config, "/water/ml", "error".to_string().as_bytes());
+            Ok(state) => {
-        } else {
+                let _ = board.mqtt_publish(&config, "/water", state.as_bytes());
-            let _ = board.mqtt_publish(
-                &config,
-                "/water/ml",
-                tank_state.left_ml.to_string().as_bytes(),
-            );
-            let _ = board.mqtt_publish(
-                &config,
-                "/water/enough_water",
-                tank_state.enough_water.to_string().as_bytes(),
-            );
-            let _ = board.mqtt_publish(
-                &config,
-                "/water/low_warning",
-                tank_state.warn_level.to_string().as_bytes(),
-            );
-            let _ =
-                board.mqtt_publish(&config, "/water/raw", tank_state.raw.to_string().as_bytes());
             }
+            Err(err) => {
+                println!("Error publishing lightstate {}", err);
+            }
+        };
     }
 
     let mut water_frozen = false;
@@ -371,6 +389,11 @@ fn safe_main() -> anyhow::Result<()> {
             if online_mode == OnlineMode::Online {
                 let _ =
                     board.mqtt_publish(&config, "/water/temperature", res.to_string().as_bytes());
+                let _ = board.mqtt_publish(
+                    &config,
+                    "/water/frozen",
+                    water_frozen.to_string().as_bytes(),
+                );
             }
         }
         None => {
@@ -437,6 +460,7 @@ fn safe_main() -> anyhow::Result<()> {
             state.active = true;
             for _ in 0..plant_config.pump_time_s {
                 unsafe { vTaskDelay(CONFIG_FREERTOS_HZ) };
+                let p_live_topic = format!("/plant{}/p live", plant + 1);
                 if plant_config.sensor_p {
                     let moist = map_range_moisture(
                         board.measure_moisture_hz(plant, plant_hal::Sensor::PUMP)? as f32,
@@ -444,17 +468,13 @@ fn safe_main() -> anyhow::Result<()> {
                     if online_mode == OnlineMode::Online {
                         let _ = board.mqtt_publish(
                             &config,
-                            format!("/plant{}/Sensor P after", plant + 1).as_str(),
+                            &p_live_topic,
                             option_to_string(moist.ok()).as_bytes(),
                         );
                     }
                 } else {
                     if online_mode == OnlineMode::Online {
-                        let _ = board.mqtt_publish(
+                        let _ = board.mqtt_publish(&config, &p_live_topic, "disabled".as_bytes());
-                            &config,
-                            format!("/plant{}/Sensor P after", plant + 1).as_str(),
-                            "disabled".as_bytes(),
-                        );
                     }
                 }
             }
@@ -534,7 +554,7 @@ fn safe_main() -> anyhow::Result<()> {
     if online_mode == OnlineMode::Online {
         match serde_json::to_string(&light_state) {
             Ok(state) => {
-                let _ = board.mqtt_publish(&config, "/light/active", state.as_bytes());
+                let _ = board.mqtt_publish(&config, "/light", state.as_bytes());
             }
             Err(err) => {
                 println!("Error publishing lightstate {}", err);
@@ -578,120 +598,34 @@ fn safe_main() -> anyhow::Result<()> {
     unsafe { esp_deep_sleep(1000 * 1000 * 60 * deep_sleep_duration_minutes as u64) };
 }
 
+fn to_string<T: Display>(value: Result<T>) -> String {
+    return match value {
+        Ok(v) => v.to_string(),
+        Err(err) => {
+            format!("{:?}", err)
+        }
+    };
+}
+
 fn publish_battery_state(
     board: &mut std::sync::MutexGuard<'_, PlantCtrlBoard<'_>>,
     config: &Config,
 ) {
-    match board.voltage_milli_volt() {
+    let bat = BatteryState {
-        Ok(v) => {
+        voltage_milli_volt: &to_string(board.voltage_milli_volt()),
-            let _ = board.mqtt_publish(
+        current_milli_ampere: &to_string(board.average_current_milli_ampere()),
-                &config,
+        cycle_count: &to_string(board.cycle_count()),
-                "/battery/voltage_milli_volt",
+        design_milli_ampere: &to_string(board.design_milli_ampere_hour()),
-                v.to_string().as_bytes(),
+        remaining_milli_ampere: &to_string(board.remaining_milli_ampere_hour()),
-            );
+        state_of_charge: &to_string(board.state_charge_percent()),
-        }
+        state_of_health: &to_string(board.state_health_percent()),
-        Err(err) => {
-            let _ = board.mqtt_publish(&config, "/battery/voltage_milli_volt", "-1".as_bytes());
-            let _ = board.mqtt_publish(&config, "/errorlog", format!("{:?}", err).as_bytes());
-        }
     };
-    match board.average_current_milli_ampere() {
+    match serde_json::to_string(&bat) {
-        Ok(v) => {
+        Ok(state) => {
-            let _ = board.mqtt_publish(
+            let _ = board.mqtt_publish(&config, "/plant/battery", state.as_bytes());
-                &config,
-                "/battery/average_current_milli_ampere",
-                v.to_string().as_bytes(),
-            );
         }
         Err(err) => {
-            let _ = board.mqtt_publish(
+            println!("Error publishing battery_state {}", err);
-                &config,
-                "/battery/average_current_milli_ampere",
-                "-1".as_bytes(),
-            );
-            let _ = board.mqtt_publish(&config, "/errorlog", format!("{:?}", err).as_bytes());
-        }
-    };
-    match board.cycle_count() {
-        Ok(v) => {
-            let _ = board.mqtt_publish(&config, "/battery/cycle_count", v.to_string().as_bytes());
-        }
-        Err(err) => {
-            let _ = board.mqtt_publish(&config, "/battery/cycle_count", "-1".as_bytes());
-            let _ = board.mqtt_publish(&config, "/errorlog", format!("{:?}", err).as_bytes());
-        }
-    };
-    match board.design_milli_ampere_hour() {
-        Ok(v) => {
-            let _ = board.mqtt_publish(
-                &config,
-                "/battery/design_milli_ampere_hour",
-                v.to_string().as_bytes(),
-            );
-        }
-        Err(err) => {
-            let _ = board.mqtt_publish(
-                &config,
-                "/battery/design_milli_ampere_hour",
-                "-1".as_bytes(),
-            );
-            let _ = board.mqtt_publish(&config, "/errorlog", format!("{:?}", err).as_bytes());
-        }
-    };
-    match board.max_milli_ampere_hour() {
-        Ok(v) => {
-            let _ = board.mqtt_publish(
-                &config,
-                "/battery/max_milli_ampere_hour",
-                v.to_string().as_bytes(),
-            );
-        }
-        Err(err) => {
-            let _ = board.mqtt_publish(&config, "/battery/max_milli_ampere_hour", "-1".as_bytes());
-            let _ = board.mqtt_publish(&config, "/errorlog", format!("{:?}", err).as_bytes());
-        }
-    };
-    match board.remaining_milli_ampere_hour() {
-        Ok(v) => {
-            let _ = board.mqtt_publish(
-                &config,
-                "/battery/remaining_milli_ampere_hour",
-                v.to_string().as_bytes(),
-            );
-        }
-        Err(err) => {
-            let _ = board.mqtt_publish(
-                &config,
-                "/battery/remaining_milli_ampere_hour",
-                "-1".as_bytes(),
-            );
-            let _ = board.mqtt_publish(&config, "/errorlog", format!("{:?}", err).as_bytes());
-        }
-    };
-    match board.state_charge_percent() {
-        Ok(v) => {
-            let _ = board.mqtt_publish(
-                &config,
-                "/battery/state_charge_percent",
-                v.to_string().as_bytes(),
-            );
-        }
-        Err(err) => {
-            let _ = board.mqtt_publish(&config, "/battery/state_charge_percent", "-1".as_bytes());
-            let _ = board.mqtt_publish(&config, "/errorlog", format!("{:?}", err).as_bytes());
-        }
-    };
-    match board.state_health_percent() {
-        Ok(v) => {
-            let _ = board.mqtt_publish(
-                &config,
-                "/battery/state_health_percent",
-                v.to_string().as_bytes(),
-            );
-        }
-        Err(err) => {
-            let _ = board.mqtt_publish(&config, "/battery/state_health_percent", "-1".as_bytes());
-            let _ = board.mqtt_publish(&config, "/errorlog", format!("{:?}", err).as_bytes());
         }
     };
 }
@@ -750,6 +684,7 @@ fn determine_tank_state(
         return rv;
     }
     return TankState {
+        warn_level: false,
         enough_water: true,
         left_ml: 1337,
         sensor_error: false,
@@ -811,24 +746,13 @@ fn determine_state_target_moisture_for_plant(
     state: &mut PlantState,
     config: &Config,
     tank_state: &TankState,
-    water_frozen: bool,
     cur: DateTime<Tz>,
 ) {
     let plant_config = &config.plants[plant];
-    match board.measure_moisture_hz(plant, plant_hal::Sensor::A) {
+    if plant_config.mode == Mode::OFF {
-        Ok(a) => {
+        return;
-            let mapped = map_range_moisture(a as f32);
-            match mapped {
-                Ok(result) => state.a = Some(result),
-                Err(err) => {
-                    state.sensor_error_a = Some(err);
-                }
-            }
-        }
-        Err(_) => {
-            state.sensor_error_a = Some(SensorError::Unknown);
-        }
     }
+
     if plant_config.sensor_b {
         match board.measure_moisture_hz(plant, plant_hal::Sensor::B) {
             Ok(b) => {
@@ -886,16 +810,9 @@ fn determine_state_target_moisture_for_plant(
     ) {
         state.out_of_work_hour = true;
     }
-    if water_frozen {
-        state.frozen = true;
-    }
     if state.dry && !state.no_water && !state.cooldown && !state.out_of_work_hour {
-        if water_frozen {
-            state.frozen = true;
-        } else {
         state.do_water = true;
     }
-    }
 }
 
 fn determine_state_timer_only_for_plant(
@@ -904,7 +821,6 @@ fn determine_state_timer_only_for_plant(
     state: &mut PlantState,
     config: &Config,
     tank_state: &TankState,
-    water_frozen: bool,
     cur: DateTime<Tz>,
 ) {
     let plant_config = &config.plants[plant];
@@ -918,9 +834,6 @@ fn determine_state_timer_only_for_plant(
                 let europe_time = next_pump.with_timezone(&Berlin);
                 state.next_pump = Some(europe_time);
                 state.cooldown = true;
-            } else {
-                if water_frozen {
-                    state.frozen = true;
             } else {
                 if tank_state.sensor_error && !config.tank_allow_pumping_if_sensor_error {
                     state.do_water = true;
@@ -929,7 +842,6 @@ fn determine_state_timer_only_for_plant(
                 }
             }
         }
-        }
         None => {
             println!(
                 "Could not restore last pump for plant {}, restoring",
@@ -947,7 +859,6 @@ fn determine_state_timer_and_deadzone_for_plant(
     state: &mut PlantState,
     config: &Config,
     tank_state: &TankState,
-    water_frozen: bool,
     cur: DateTime<Tz>,
 ) {
     let plant_config = &config.plants[plant];
@@ -970,9 +881,6 @@ fn determine_state_timer_and_deadzone_for_plant(
                 state.out_of_work_hour = true;
             }
             if !state.cooldown && !state.out_of_work_hour {
-                if water_frozen {
-                    state.frozen = true;
-                } else {
                 if tank_state.sensor_error && !config.tank_allow_pumping_if_sensor_error {
                     state.do_water = true;
                 } else if !tank_state.enough_water {
@@ -980,7 +888,6 @@ fn determine_state_timer_and_deadzone_for_plant(
                 }
             }
         }
-        }
         None => {
             println!(
                 "Could not restore last pump for plant {}, restoring",
@@ -1007,35 +914,15 @@ fn determine_next_plant(
             config::Mode::OFF => {}
             config::Mode::TargetMoisture => {
                 determine_state_target_moisture_for_plant(
-                    board,
+                    board, plant, state, config, tank_state, cur,
-                    plant,
-                    state,
-                    config,
-                    tank_state,
-                    water_frozen,
-                    cur,
                 );
             }
             config::Mode::TimerOnly => {
-                determine_state_timer_only_for_plant(
+                determine_state_timer_only_for_plant(board, plant, state, config, tank_state, cur);
-                    board,
-                    plant,
-                    state,
-                    config,
-                    tank_state,
-                    water_frozen,
-                    cur,
-                );
             }
             config::Mode::TimerAndDeadzone => {
                 determine_state_timer_and_deadzone_for_plant(
-                    board,
+                    board, plant, state, config, tank_state, cur,
-                    plant,
-                    state,
-                    config,
-                    tank_state,
-                    water_frozen,
-                    cur,
                 );
             }
         }
@@ -1058,10 +945,12 @@ fn determine_next_plant(
             "Checking for water plant {} with state {}",
             plant, state.do_water
         );
+        if !water_frozen {
             if state.do_water {
                 return Some(plant);
             }
         }
+    }
     println!("No plant needs water");
     return None;
 }
@@ -1075,156 +964,68 @@ fn update_plant_state(
         let state = &plantstate[plant];
         let plant_config = config.plants[plant];
 
-        let _ = board.mqtt_publish(
+        let mode = format!("{:?}", plant_config.mode);
-            &config,
-            format!("/plant{}/mode", plant + 1).as_str(),
-            match plant_config.mode {
-                config::Mode::OFF => "OFF".as_bytes(),
-                config::Mode::TargetMoisture => "TargetMoisture".as_bytes(),
-                config::Mode::TimerOnly => "TimerOnly".as_bytes(),
-                config::Mode::TimerAndDeadzone => "TimerAndDeadzone".as_bytes(),
-            },
-        );
 
-        let last_time = board.last_pump_time(plant);
+        let plant_dto = PlantStateMQTT {
-        match last_time {
+            p_start: &sensor_to_string(state.p, state.sensor_error_p, plant_config.sensor_p),
-            Some(last_time) => {
+            p_end: &sensor_to_string(state.after_p, state.sensor_error_p, plant_config.sensor_p),
-                let europe_time = last_time.with_timezone(&Berlin);
+            a: &sensor_to_string(state.a, state.sensor_error_a, true),
+            b: &sensor_to_string(state.b, state.sensor_error_b, plant_config.sensor_b),
+            active: state.active,
+            mode: &mode,
+            last_pump: &&time_to_string_utc(board.last_pump_time(plant)),
+            next_pump: &time_to_string(state.next_pump),
+            consecutive_pump_count: state.consecutive_pump_count,
+            cooldown: state.cooldown,
+            dry: state.dry,
+            not_effective: state.not_effective,
+            out_of_work_hour: state.out_of_work_hour,
+            pump_error: state.pump_error,
+        };
+
+        match serde_json::to_string(&plant_dto) {
+            Ok(state) => {
+                let plant_topic = format!("/plant{}", plant + 1);
+                let _ = board.mqtt_publish(&config, &plant_topic, state.as_bytes());
+            }
+            Err(err) => {
+                println!("Error publishing lightstate {}", err);
+            }
+        };
+    }
+}
+
+fn time_to_string_utc(value_option: Option<DateTime<Utc>>) -> String {
+    let converted = value_option.and_then(|utc| Some(utc.with_timezone(&Berlin)));
+    return time_to_string(converted);
+}
+
+fn time_to_string(value_option: Option<DateTime<Tz>>) -> String {
+    match value_option {
+        Some(value) => {
+            let europe_time = value.with_timezone(&Berlin);
             if europe_time.year() > 2023 {
-                    let time = europe_time.to_rfc3339();
+                return europe_time.to_rfc3339();
-                    let _ = board.mqtt_publish(
-                        &config,
-                        format!("/plant{}/last pump", plant + 1).as_str(),
-                        time.as_bytes(),
-                    );
             } else {
-                    let _ = board.mqtt_publish(
+                return "smtp error".to_owned();
-                        &config,
-                        format!("/plant{}/last pump", plant + 1).as_str(),
-                        "N/A".as_bytes(),
-                    );
-                }
-            }
-            None => {
-                let _ = board.mqtt_publish(
-                    &config,
-                    format!("/plant{}/last pump", plant + 1).as_str(),
-                    "N/A".as_bytes(),
-                );
             }
         }
+        None => return "N/A".to_owned(),
+    };
+}
 
-        match state.next_pump {
+fn sensor_to_string(value: Option<u8>, error: Option<SensorError>, enabled: bool) -> String {
-            Some(next) => {
+    if enabled {
-                let time = next.to_rfc3339();
+        match error {
-                let _ = board.mqtt_publish(
+            Some(error) => return format!("{:?}", error),
-                    &config,
+            None => match value {
-                    format!("/plant{}/next pump", plant + 1).as_str(),
+                Some(v) => return v.to_string(),
-                    time.as_bytes(),
+                None => return "Error".to_owned(),
-                );
+            },
         }
-            None => {
-                let _ = board.mqtt_publish(
-                    &config,
-                    format!("/plant{}/next pump", plant + 1).as_str(),
-                    "N/A".as_bytes(),
-                );
-            }
-        }
-        let _ = board.mqtt_publish(
-            config,
-            format!("/plant{}/active", plant + 1).as_str(),
-            state.active.to_string().as_bytes(),
-        );
-        let _ = board.mqtt_publish(
-            config,
-            format!("/plant{}/Sensor A", plant + 1).as_str(),
-            option_to_string(state.a).as_bytes(),
-        );
-        if plant_config.sensor_b {
-            let _ = board.mqtt_publish(
-                config,
-                format!("/plant{}/Sensor B", plant + 1).as_str(),
-                option_to_string(state.b).as_bytes(),
-            );
     } else {
-            let _ = board.mqtt_publish(
+        return "disabled".to_owned();
-                config,
+    };
-                format!("/plant{}/Sensor B", plant + 1).as_str(),
-                "disabled".as_bytes(),
-            );
-        }
-
-        if plant_config.sensor_p {
-            let _ = board.mqtt_publish(
-                config,
-                format!("/plant{}/Sensor P before", plant + 1).as_str(),
-                option_to_string(state.p).as_bytes(),
-            );
-            let _ = board.mqtt_publish(
-                config,
-                format!("/plant{}/Sensor P after", plant + 1).as_str(),
-                option_to_string(state.after_p).as_bytes(),
-            );
-        } else {
-            let _ = board.mqtt_publish(
-                config,
-                format!("/plant{}/Sensor P before", plant + 1).as_str(),
-                "disabled".as_bytes(),
-            );
-            let _ = board.mqtt_publish(
-                config,
-                format!("/plant{}/Sensor P after", plant + 1).as_str(),
-                "disabled".as_bytes(),
-            );
-        }
-
-        let _ = board.mqtt_publish(
-            config,
-            format!("/plant{}/Should water", plant + 1).as_str(),
-            state.do_water.to_string().as_bytes(),
-        );
-        let _ = board.mqtt_publish(
-            config,
-            format!("/plant{}/Is frozen", plant + 1).as_str(),
-            state.frozen.to_string().as_bytes(),
-        );
-        let _ = board.mqtt_publish(
-            config,
-            format!("/plant{}/Is dry", plant + 1).as_str(),
-            state.dry.to_string().as_bytes(),
-        );
-        let _ = board.mqtt_publish(
-            config,
-            format!("/plant{}/Pump Error", plant + 1).as_str(),
-            state.pump_error.to_string().as_bytes(),
-        );
-        let _ = board.mqtt_publish(
-            config,
-            format!("/plant{}/Pump Ineffective", plant + 1).as_str(),
-            state.not_effective.to_string().as_bytes(),
-        );
-        let _ = board.mqtt_publish(
-            config,
-            format!("/plant{}/Is in Cooldown", plant + 1).as_str(),
-            state.cooldown.to_string().as_bytes(),
-        );
-        let _ = board.mqtt_publish(
-            config,
-            format!("/plant{}/No Water", plant + 1).as_str(),
-            state.no_water.to_string().as_bytes(),
-        );
-        let _ = board.mqtt_publish(
-            config,
-            format!("/plant{}/Out of Work Hour", plant + 1).as_str(),
-            state.out_of_work_hour.to_string().as_bytes(),
-        );
-        let _ = board.mqtt_publish(
-            config,
-            format!("/plant{}/consecutive pump count", plant + 1).as_str(),
-            state.consecutive_pump_count.to_string().as_bytes(),
-        );
-    }
 }
 
 fn wait_infinity(wait_type: WaitType, reboot_now: Arc<AtomicBool>) -> ! {

rust/src/plant_hal.rs

@@ -803,7 +803,7 @@ impl PlantCtrlBoardInteraction for PlantCtrlBoard<'_> {
                 };
             }
             None => {
-                bail!("No mqtt client, aborting publish");
+                bail!("No mqtt client");
             }
         }
     }