updated shematic for new version

2020-09-12 16:47:58 +02:00
parent ca94f4936f
commit 1872e0a11c
36 changed files with 1770 additions and 750 deletions
--- a/esp32test/Esp32DeepSleepTest/src/main.cpp
+++ b/esp32test/Esp32DeepSleepTest/src/main.cpp
@@ -0,0 +1,108 @@
+#include <Arduino.h>
+#include "esp_sleep.h"
+
+#define uS_TO_S_FACTOR 1000000  /* Conversion factor for micro seconds to seconds */
+#define TIME_TO_SLEEP  2        /* Time ESP32 will go to sleep (in seconds) */
+
+RTC_DATA_ATTR int bootCount = 0;
+int secondBootCount = 0;
+
+void print_wakeup_reason(){
+  esp_sleep_wakeup_cause_t wakeup_reason;
+
+  wakeup_reason = esp_sleep_get_wakeup_cause();
+
+  switch(wakeup_reason){
+    case ESP_SLEEP_WAKEUP_EXT0 : Serial.println("Wakeup caused by external signal using RTC_IO"); break;
+    case ESP_SLEEP_WAKEUP_EXT1 : Serial.println("Wakeup caused by external signal using RTC_CNTL"); break;
+    case ESP_SLEEP_WAKEUP_TIMER : Serial.println("Wakeup caused by timer"); break;
+    case ESP_SLEEP_WAKEUP_TOUCHPAD : Serial.println("Wakeup caused by touchpad"); break;
+    case ESP_SLEEP_WAKEUP_ULP : Serial.println("Wakeup caused by ULP program"); break;
+    default : Serial.printf("Wakeup was not caused by deep sleep: %d\n",wakeup_reason); break;
+  }
+}
+
+void setup() {
+  pinMode(GPIO_NUM_23, OUTPUT);
+  pinMode(GPIO_NUM_22, OUTPUT);
+  pinMode(GPIO_NUM_21, OUTPUT);
+  pinMode(GPIO_NUM_19, OUTPUT);
+  pinMode(GPIO_NUM_18, OUTPUT);
+  pinMode(GPIO_NUM_5, OUTPUT);
+  pinMode(GPIO_NUM_4, OUTPUT);
+  pinMode(GPIO_NUM_15, OUTPUT);
+  pinMode(GPIO_NUM_13, OUTPUT);
+  digitalWrite(GPIO_NUM_23, HIGH);
+  digitalWrite(GPIO_NUM_22, HIGH);
+  digitalWrite(GPIO_NUM_21, HIGH);
+  digitalWrite(GPIO_NUM_19, HIGH);
+  digitalWrite(GPIO_NUM_18, HIGH);
+  digitalWrite(GPIO_NUM_5, HIGH);
+  digitalWrite(GPIO_NUM_4, HIGH);
+  digitalWrite(GPIO_NUM_15, HIGH);
+  digitalWrite(GPIO_NUM_13, HIGH);
+  Serial.begin(115200);
+
+  //Increment boot number and print it every reboot
+  ++bootCount;
+  ++secondBootCount;
+  Serial.println("Boot number: " + String(bootCount) + " " + String(secondBootCount));
+
+  //Print the wakeup reason for ESP32
+  print_wakeup_reason();
+
+  /*
+  First we configure the wake up source
+  We set our ESP32 to wake up every 5 seconds
+  */
+  esp_sleep_enable_timer_wakeup(TIME_TO_SLEEP * uS_TO_S_FACTOR);
+  Serial.println("Setup ESP32 to sleep for every " + String(TIME_TO_SLEEP) +
+  " Seconds");
+  esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_OFF);
+  esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_SLOW_MEM, ESP_PD_OPTION_ON);
+  esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_FAST_MEM, ESP_PD_OPTION_OFF);
+  esp_sleep_pd_config(ESP_PD_DOMAIN_XTAL,ESP_PD_OPTION_ON);
+
+
+
+  pinMode(GPIO_NUM_32, ANALOG);
+  digitalWrite(GPIO_NUM_32, HIGH);
+  pinMode(GPIO_NUM_33, INPUT_PULLUP);
+  digitalWrite(GPIO_NUM_33, HIGH);
+  pinMode(GPIO_NUM_25, INPUT_PULLUP);
+  digitalWrite(GPIO_NUM_25, HIGH);
+  pinMode(GPIO_NUM_26, INPUT_PULLUP);
+  pinMode(GPIO_NUM_27, INPUT_PULLUP);
+  pinMode(GPIO_NUM_14, INPUT_PULLUP);
+  pinMode(GPIO_NUM_12, INPUT_PULLUP);
+}
+
+void loop() {
+  Serial.println("------------");
+  Serial.flush(); 
+  delay(1000);
+  digitalWrite(GPIO_NUM_23, analogRead(GPIO_NUM_34) > 3500);
+  
+  Serial.println(analogRead(GPIO_NUM_34));
+  
+  Serial.println(analogRead(GPIO_NUM_35));
+  
+  Serial.println(analogRead(GPIO_NUM_32));
+  
+  Serial.println(analogRead(GPIO_NUM_33));
+  
+  Serial.println(analogRead(GPIO_NUM_25));
+  
+  Serial.println(analogRead(GPIO_NUM_26));
+  
+  Serial.println(analogRead(GPIO_NUM_27));
+  Serial.println(analogRead(GPIO_NUM_14));
+  Serial.println(analogRead(GPIO_NUM_12));
+   
+  gpio_hold_en(GPIO_NUM_4);
+  gpio_hold_en(GPIO_NUM_13);
+  gpio_hold_en(GPIO_NUM_15);
+  gpio_deep_sleep_hold_en();
+
+  esp_deep_sleep_start();
+}