adjust folder to be shorter

This commit is contained in:
Empire 2023-11-20 01:46:19 +01:00
parent 2092354bc9
commit 17db1b8a45
14 changed files with 166 additions and 79 deletions

View File

@ -1,79 +0,0 @@
use embedded_hal::digital::v1_compat::OldOutputPin;
use shift_register_driver::sipo::{ShiftRegister24, ShiftRegisterPin};
use esp_idf_hal::gpio::{PinDriver};
use esp_idf_hal::prelude::Peripherals;
use dummy_pin::DummyPin;
use embedded_hal::digital::v2::OutputPin;
#[macro_use]
extern crate shift_register_driver;
trait PlantCtrlBoardInteraction{
fn measure_moisture() -> i16;
fn default() -> Self;
}
trait Plant{
fn setPump(pump:bool);
}
struct PlantHal<'d>{
pump:ShiftRegisterPin<'d>
}
struct PlantCtrlBoard{
dummy:i32
}
impl PlantCtrlBoardInteraction for PlantCtrlBoard {
fn measure_moisture() -> i16 {
//pcnr here
return 1_i16;
}
fn default() -> Self {
let peripherals = Peripherals::take().unwrap();
let clock = OldOutputPin::from(PinDriver::output(peripherals.pins.gpio21).unwrap());
let latch = OldOutputPin::from(PinDriver::output(peripherals.pins.gpio22).unwrap());
let data = OldOutputPin::from(PinDriver::output(peripherals.pins.gpio19).unwrap());
let shift_register = ShiftRegister24::new(clock, latch, data);
let registerOutput = shift_register.decompose();
Self { dummy: 12 }
}
}
const PLANT_COUNT:usize = 8;
#[link_section = ".rtc.data"]
static mut LAST_WATERING_TIMESTAMP: [u64; PLANT_COUNT] = [0; PLANT_COUNT];
#[link_section = ".rtc.data"]
static mut CONSECUTIVE_WATERING_PLANT: [u64; PLANT_COUNT] = [0; PLANT_COUNT];
#[link_section = ".rtc.data"]
static mut LOW_VOLTAGE_DETECTED:bool = false;
fn main() {
// It is necessary to call this function once. Otherwise some patches to the runtime
// implemented by esp-idf-sys might not link properly. See https://github.com/esp-rs/esp-idf-template/issues/71
esp_idf_svc::sys::link_patches();
// Bind the log crate to the ESP Logging facilities
esp_idf_svc::log::EspLogger::initialize_default();
log::info!("Hello, world!");
let board = PlantCtrlBoard::default();
}

166
rust/src/main.rs Normal file
View File

@ -0,0 +1,166 @@
use chrono::Utc;
use embedded_hal::digital::v1_compat::OldOutputPin;
use esp_idf_hal::adc::config::Config;
use esp_idf_hal::adc::{AdcDriver, AdcChannelDriver, attenuation};
use shift_register_driver::sipo::{ShiftRegister24, ShiftRegisterPin};
use esp_idf_hal::gpio::PinDriver;
use esp_idf_hal::prelude::Peripherals;
const PLANT_COUNT:usize = 8;
#[link_section = ".rtc.data"]
static mut LAST_WATERING_TIMESTAMP: [u64; PLANT_COUNT] = [0; PLANT_COUNT];
#[link_section = ".rtc.data"]
static mut CONSECUTIVE_WATERING_PLANT: [u64; PLANT_COUNT] = [0; PLANT_COUNT];
#[link_section = ".rtc.data"]
static mut LOW_VOLTAGE_DETECTED:bool = false;
struct BatteryState {
state_charge_percent: u8,
max_error_percent: u8,
remaining_milli_ampere_hour: u32,
max_milli_ampere_hour: u32,
design_milli_ampere_hour:u32,
voltage_milli_volt: u16,
average_current_milli_ampere: u16,
temperature_tenth_kelvin: u32,
average_time_to_empty_minute: u16,
average_time_to_full_minute: u16,
average_discharge_power_cycle_milli_watt: u16,
cycle_count: u16,
state_health_percent: u8
}
trait PlantCtrlBoardInteraction{
fn battery_state() -> BatteryState;
fn is_day() -> bool;
fn water_temperature_c() -> u16;
fn tank_sensor_mv() -> u16;
fn set_low_voltage_in_cycle();
fn clear_low_voltage_in_cycle();
fn low_voltage_in_cycle(low_voltage:bool);
//keep state during deepsleep
fn light(enable:bool);
fn plant_count() -> i8;
fn measure_moisture_b_hz(plant:i8) -> i16;
fn measure_moisture_a_hz(plant:i8) -> i16;
fn measure_moisture_p_hz(plant:i8) -> i16;
fn pump(plant:i8, enable:bool);
fn last_pump_time(plant:i8) -> chrono::DateTime<Utc>;
fn store_last_pump_time(plant:i8, time: chrono::DateTime<Utc>);
fn store_consecutive_pump_count(plant:i8, count:i16);
fn consecutive_pump_count(plant:i8) -> i16;
//keep state during deepsleep
fn fault(plant:i8, enable:bool);
fn default() -> Self;
}
trait Plant{
fn setPump(pump:bool);
}
struct PlantHal<'d>{
pump:ShiftRegisterPin<'d>
}
struct PlantCtrlBoard{
dummy:i32
}
impl PlantCtrlBoardInteraction for PlantCtrlBoard {
fn default() -> Self {
let peripherals = Peripherals::take().unwrap();
let mut adc = AdcDriver::new(peripherals.adc1, &Config::new().calibration(true)).unwrap();
let mut adc_pin: esp_idf_hal::adc::AdcChannelDriver<{ attenuation::DB_11 }, _> = AdcChannelDriver::new(peripherals.pins.gpio39).unwrap();
let analog_value = adc.read(&mut adc_pin);
let clock = OldOutputPin::from(PinDriver::output(peripherals.pins.gpio21).unwrap());
let latch = OldOutputPin::from(PinDriver::output(peripherals.pins.gpio22).unwrap());
let data = OldOutputPin::from(PinDriver::output(peripherals.pins.gpio19).unwrap());
let shift_register = ShiftRegister24::new(clock, latch, data);
let registerOutput = shift_register.decompose();
Self { dummy: 12 }
}
fn plant_count() -> i8 {
todo!()
}
fn fault(plant:i8, state:bool) {
todo!()
}
fn pump(plant:i8, state:bool) {
todo!()
}
fn battery_state() -> BatteryState {
todo!()
}
fn is_day() -> bool {
todo!()
}
fn water_temperature_c() -> u16 {
todo!()
}
fn tank_sensor_mv() -> u16 {
todo!()
}
fn light(enable:bool) {
todo!()
}
fn measure_moisture_b_hz(plant:i8) -> i16 {
todo!()
}
fn measure_moisture_a_hz(plant:i8) -> i16 {
todo!()
}
fn measure_moisture_p_hz(plant:i8) -> i16 {
todo!()
}
fn last_watering_time(plant:i8) -> chrono::DateTime<Utc> {
todo!()
}
}
fn main() {
// It is necessary to call this function once. Otherwise some patches to the runtime
// implemented by esp-idf-sys might not link properly. See https://github.com/esp-rs/esp-idf-template/issues/71
esp_idf_svc::sys::link_patches();
// Bind the log crate to the ESP Logging facilities
esp_idf_svc::log::EspLogger::initialize_default();
log::info!("Hello, world!");
let board = PlantCtrlBoard::default();
}