added chrono-tz filter

.gitignore

@@ -2,3 +2,7 @@
 PlantCtrlESP32-backups/
 board/production/PlantCtrlESP32_2023-11-08_00-45-35/PlantCtrlESP32.zip
 board/production/PlantCtrlESP32_2023-11-08_00-45-35/netlist.ipc
+.vscode
+.embuild/
+target
+Cargo.lock

rust/.cargo/config.toml

@@ -4,7 +4,8 @@ target = "xtensa-esp32-espidf"
 [target.xtensa-esp32-espidf]
 linker = "ldproxy"
 # runner = "espflash --monitor" # Select this runner for espflash v1.x.x
-runner = "espflash flash --monitor" # Select this runner for espflash v2.x.x
+#runner = "espflash flash --monitor" # Select this runner for espflash v2.x.x
+runner = "cargo runner"
 rustflags = [ "--cfg",  "espidf_time64"] # Extending time_t for ESP IDF 5: https://github.com/esp-rs/rust/issues/110
 
 [unstable]
@@ -14,4 +15,4 @@ build-std = ["std", "panic_abort"]
 MCU="esp32"
 # Note: this variable is not used by the pio builder (`cargo build --features pio`)
 ESP_IDF_VERSION = "v5.1.1"
-
+CHRONO_TZ_TIMEZONE_FILTER="UTC|Europe/Berlin"

rust/.gitignore

@@ -1,4 +0,0 @@
-/.vscode
-/.embuild
-/target
-/Cargo.lock

rust/Cargo.toml

@@ -7,17 +7,35 @@ resolver = "2"
 rust-version = "1.71"
 
 [profile.release]
+# Explicitly disable LTO which the Xtensa codegen backend has issues
+lto = "thin"
 opt-level = "s"
-strip = true
+strip = false
-lto = "fat"
 codegen-units = 1
 
 [profile.dev]
+# Explicitly disable LTO which the Xtensa codegen backend has issues
+lto = "thin"
 debug = true    # Symbols are nice and they don't increase the size on Flash
 opt-level = "s"
-lto = "fat"
+strip = false
 codegen-units = 1
 
+[package.metadata.cargo_runner]
+# The string `$TARGET_FILE` will be replaced with the path from cargo.
+command = [
+    "cargo",
+    "espflash",
+    "save-image",
+    "--chip",
+    "esp32",
+    "image.bin"
+]
+
+
+[package.metadata.espflash]
+partition_table = "partitions2.csv"
+
 [features]
 default = ["std", "embassy", "esp-idf-svc/native"]
 
@@ -32,7 +50,6 @@ embassy = ["esp-idf-svc/embassy-sync", "esp-idf-svc/critical-section", "esp-idf-
 log = { version = "0.4", default-features = false }
 esp-idf-svc = { version = "0.47.3", default-features = false }
 serde = { version = "1.0.192",  features = ["derive"] }
-minimq = "0.8.0"
 average = { version = "0.14.1" , features = ["std"] }
 esp32 = "0.27.0"
 bit_field = "0.10.2"
@@ -42,19 +59,14 @@ esp-idf-hal = "0.42.5"
 esp-idf-sys = { version = "0.33.7", features = ["binstart", "native"] }
 esp-ota = "0.2.0"
 esp_idf_build = "0.1.3"
-datetime = "0.5.2"
 build-time = "0.1.2"
 chrono = { version = "0.4.23", default-features = false , features = ["iana-time-zone"] }
-chrono-tz = "0.8.0"
+chrono-tz = {version="0.8.0", default-features = false , features = [ "filter-by-regex" ]}
-paste = "1.0.14"
 embedded-hal = "0.2.7"
-dummy-pin = "0.1.1"
 shift-register-driver = "0.1.1"
 one-wire-bus = "0.1.1"
-anyhow = "1.0.75"
+anyhow = { version = "1.0.75", features = ["std", "backtrace"] }
 #?bq34z100 required
 
-
-
 [build-dependencies]
 embuild = "0.31.3"

rust/sdkconfig.defaults

@@ -3,7 +3,7 @@ CONFIG_ESP_MAIN_TASK_STACK_SIZE=8000
 
 # Use this to set FreeRTOS kernel tick frequency to 1000 Hz (100 Hz by default).
 # This allows to use 1 ms granuality for thread sleeps (10 ms by default).
-#CONFIG_FREERTOS_HZ=1000
+CONFIG_FREERTOS_HZ=1000
 
 # Workaround for https://github.com/espressif/esp-idf/issues/7631
 #CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=n

rust/setup.txt

@@ -10,3 +10,9 @@ export PATH="$PATH:$HOME/.cargo/bin"
 espup install
 rustup toolchain link esp ~/.rustup/toolchains/esp/
 cargo install ldproxy
+
+cargo espflash save-image --chip esp32 image.bin
+
+
+esptool.py --chip ESP32-C3 elf2image --output my-app.bin target/release/my-app
+$ espflash save-image ESP32-C3 target/release/my-app my-app.bin

rust/src/main.rs

@@ -1,11 +1,22 @@
-use chrono::{Datelike, Timelike};
+use chrono::{Datelike, Timelike, NaiveDateTime};
-
+use build_time::build_time_utc;
-use crate::plant_hal::{PlantCtrlBoardInteraction, PlantHal, CreatePlantHal, PLANT_COUNT};
 
+use chrono_tz::Europe::Berlin;
+use esp_idf_hal::delay::Delay;
+use plant_hal::{PlantCtrlBoardInteraction, PlantHal, CreatePlantHal, PLANT_COUNT};
+use anyhow::{Context, Result};
+use webserver::webserver::httpd;
 pub mod plant_hal;
+mod webserver {
+    pub mod webserver;
+}
 
-fn main() {
+fn web_initial_mode() {
+    //expect running wifi access point!
+    let _httpd = httpd(true);
+}
 
+fn main() -> Result<()>{
     // It is necessary to call this function once. Otherwise some patches to the runtime
     // implemented by esp-idf-sys might not link properly. See https://github.com/esp-rs/esp-idf-template/issues/71
     esp_idf_svc::sys::link_patches();
@@ -13,21 +24,30 @@ fn main() {
     // Bind the log crate to the ESP Logging facilities
     esp_idf_svc::log::EspLogger::initialize_default();
 
-    log::info!("Hello, world!");
+    log::info!("Startup Rust");
+
+    let utc_build_time = build_time_utc!();
+    println!("Version was build {}", utc_build_time);
     
 
-    let mut board = PlantHal::create();
+    let mut board = PlantHal::create()?;     
     
      
-    let mut cur = board.time();
+    let time = board.time();
+    let mut cur = match time {
+        Ok(cur) => cur,
+        Err(err) => {
+            log::error!("sntp error {}", err);
+            NaiveDateTime::from_timestamp_millis(0).unwrap().and_utc()
+        }
+    };
     //check if we know the time current > 2020
     if cur.year() < 2020 {
         if board.is_day() {
-            //assume 13:00 if solar reports day
+            //assume TZ safe times ;)
-            cur = *cur.with_hour(13).get_or_insert(cur);
+            cur = *cur.with_hour(15).get_or_insert(cur);
         } else {
-            //assume 01:00 if solar reports night
+            cur = *cur.with_hour(3).get_or_insert(cur);
-            cur = *cur.with_hour(1).get_or_insert(cur);
         }
     }
 
@@ -49,10 +69,26 @@ fn main() {
         //measure tank level (without wifi due to interference)
         //TODO this should be a result// detect invalid measurement value
         let tank_value = board.tank_sensor_mv();
-            //if not possible value, blink general fault error_tank_sensor_fault
+        match tank_value {
+            Ok(_) => todo!(),
+            Err(_) => {
+                //if not possible value, blink general fault error_tank_sensor_fault
                 board.general_fault(true);
                 //set general fault persistent
                 //set tank sensor state to fault
+            },
+        }
+            
+
+    //measure each plant moisture
+    let mut initial_measurements_a: [i32;PLANT_COUNT] = [0;PLANT_COUNT];
+    let mut initial_measurements_b: [i32;PLANT_COUNT] = [0;PLANT_COUNT];
+    let mut initial_measurements_p: [i32;PLANT_COUNT] = [0;PLANT_COUNT];
+    for plant in 0..PLANT_COUNT {
+        initial_measurements_a[plant] = board.measure_moisture_hz(plant, plant_hal::Sensor::A)?;
+        initial_measurements_b[plant] = board.measure_moisture_hz(plant, plant_hal::Sensor::B)?;
+        initial_measurements_p[plant] = board.measure_moisture_hz(plant, plant_hal::Sensor::PUMP)?;
+    }
 
     
     //try connect wifi and do mqtt roundtrip
@@ -62,18 +98,14 @@ fn main() {
     
     match board.sntp(1000*120) {
         Ok(new_time) => cur = new_time,
-        Err(_) => todo!(),
+        Err(err) => {
+            println!("sntp error: {}", err);
+        }
     }
+    println!("Running logic at utc {}", cur);
+    let europe_time = cur.with_timezone(&Berlin);
+    println!("Running logic at europe/berlin {}", europe_time);
 
-    //measure each plant moisture
-    let mut initial_measurements_a: [i32;PLANT_COUNT] = [0;PLANT_COUNT];
-    let mut initial_measurements_b: [i32;PLANT_COUNT] = [0;PLANT_COUNT];
-    let mut initial_measurements_p: [i32;PLANT_COUNT] = [0;PLANT_COUNT];
-    for plant in 0..PLANT_COUNT {
-        initial_measurements_a[plant] = board.measure_moisture_hz(plant, plant_hal::Sensor::A);
-        initial_measurements_b[plant] = board.measure_moisture_hz(plant, plant_hal::Sensor::B);
-        initial_measurements_p[plant] = board.measure_moisture_hz(plant, plant_hal::Sensor::PUMP);
-    }
 
 
     //if config battery mode
@@ -117,10 +149,14 @@ fn main() {
         //lightstate = active
     
 
+        web_initial_mode();
+        let delay = Delay::new_default();
+        loop {
+            //let freertos do shit
+            delay.delay_ms(1001);
+        }
 
-
+        return Ok(())
-
-
 
 }
 

rust/src/plant_hal.rs

@@ -0,0 +1,404 @@
+use embedded_svc::wifi::{Configuration, ClientConfiguration, AuthMethod};
+use esp_idf_svc::eventloop::EspSystemEventLoop;
+use esp_idf_svc::nvs::EspDefaultNvsPartition;
+use esp_idf_svc::wifi::EspWifi;
+
+use std::sync::Mutex;
+use anyhow::{Context, Result, bail};
+use anyhow::anyhow;
+
+use chrono::{Utc, NaiveDateTime, DateTime};
+use ds18b20::Ds18b20;
+use embedded_hal::digital::v1_compat::OldOutputPin;
+use embedded_hal::digital::v2::OutputPin;
+use esp_idf_hal::adc::config::Config;
+use esp_idf_hal::adc::{AdcDriver, AdcChannelDriver, attenuation};
+use esp_idf_hal::delay::Delay;
+use esp_idf_hal::pcnt::{PcntDriver, PcntChannel, PinIndex, PcntChannelConfig, PcntControlMode, PcntCountMode};
+use esp_idf_hal::reset::ResetReason;
+use esp_idf_svc::sntp::{self, SyncStatus};
+use esp_idf_svc::systime::EspSystemTime;
+use esp_idf_sys::EspError;
+use one_wire_bus::OneWire;
+use shift_register_driver::sipo::ShiftRegister24;
+use esp_idf_hal::gpio::{PinDriver, Gpio39, Gpio4, AnyInputPin};
+use esp_idf_hal::prelude::Peripherals;
+
+pub const PLANT_COUNT:usize = 8;
+const PINS_PER_PLANT:usize = 5;
+const PLANT_PUMP_OFFSET:usize = 0;
+const PLANT_FAULT_OFFSET:usize = 1;
+const PLANT_MOIST_PUMP_OFFSET:usize = 2;
+const PLANT_MOIST_B_OFFSET:usize = 3;
+const PLANT_MOIST_A_OFFSET:usize = 4;
+
+
+#[link_section = ".rtc.data"]
+static mut LAST_WATERING_TIMESTAMP: [i64; PLANT_COUNT] = [0; PLANT_COUNT];
+#[link_section = ".rtc.data"]
+static mut CONSECUTIVE_WATERING_PLANT: [u32; PLANT_COUNT] = [0; PLANT_COUNT];
+#[link_section = ".rtc.data"]
+static mut LOW_VOLTAGE_DETECTED:bool = false;
+
+
+pub struct BatteryState {
+    state_charge_percent: u8,
+    max_error_percent: u8,
+    remaining_milli_ampere_hour: u32,
+    max_milli_ampere_hour: u32,
+    design_milli_ampere_hour:u32,
+    voltage_milli_volt: u16,
+    average_current_milli_ampere: u16,
+    temperature_tenth_kelvin: u32,
+    average_time_to_empty_minute: u16,
+    average_time_to_full_minute: u16,
+    average_discharge_power_cycle_milli_watt: u16,
+    cycle_count: u16,
+    state_health_percent: u8
+}
+
+pub enum Sensor{
+    A,
+    B,
+    PUMP
+}
+pub trait PlantCtrlBoardInteraction{
+    fn time(&mut self) -> Result<chrono::DateTime<Utc>>;
+    fn wifi(&mut self, ssid:&str, password:Option<&str>, max_wait:u32) -> Result<()>;
+    fn sntp(&mut self, max_wait:u32) -> Result<chrono::DateTime<Utc>>;
+
+    fn battery_state(&mut self) -> Result<BatteryState>;
+
+    fn general_fault(&mut self, enable: bool);
+    
+    fn is_day(&self,) -> bool;
+    fn water_temperature_c(&mut self,) -> Result<f32>;
+    fn tank_sensor_mv(&mut self,) -> Result<u16>;
+
+    fn set_low_voltage_in_cycle(&mut self,);
+    fn clear_low_voltage_in_cycle(&mut self,);
+    fn low_voltage_in_cycle(&mut self) -> bool;
+    fn any_pump(&mut self, enabled:bool)  -> Result<()>;
+
+    //keep state during deepsleep
+    fn light(&mut self,enable:bool) -> Result<()>;
+
+    fn measure_moisture_hz(&self, plant:usize, sensor:Sensor) -> Result<i32>;
+    fn pump(&self,plant:usize, enable:bool) -> Result<()>;
+    fn last_pump_time(&self,plant:usize) -> Result<chrono::DateTime<Utc>>;
+    fn store_last_pump_time(&mut self,plant:usize, time: chrono::DateTime<Utc>);
+    fn store_consecutive_pump_count(&mut self,plant:usize, count:u32);
+    fn consecutive_pump_count(&mut self,plant:usize) -> u32;
+
+    //keep state during deepsleep
+    fn fault(&self,plant:usize, enable:bool);
+}
+
+pub trait CreatePlantHal<'a> {
+    fn create()-> Result<PlantCtrlBoard<'static>>;
+}
+
+pub struct PlantHal {
+
+}
+
+
+
+impl CreatePlantHal<'_> for PlantHal{
+    fn create() -> Result<PlantCtrlBoard<'static>> {
+        let peripherals = Peripherals::take()?; 
+        
+        let clock = OldOutputPin::from(PinDriver::output(peripherals.pins.gpio21)?);
+        let latch = OldOutputPin::from(PinDriver::output(peripherals.pins.gpio22)?);
+        let data = OldOutputPin::from(PinDriver::output(peripherals.pins.gpio19)?);
+
+        let one_wire_pin = PinDriver::input_output_od(peripherals.pins.gpio4)?;
+        //TODO make to none if not possible to init
+
+        //init,reset rtc memory depending on cause
+        let reasons = ResetReason::get();
+        let reset_store = match reasons {
+            ResetReason::Software => false,
+            ResetReason::ExternalPin => false,
+            ResetReason::Watchdog => true,
+            ResetReason::Sdio => true,
+            ResetReason::Panic => true,
+            ResetReason::InterruptWatchdog => true,
+            ResetReason::PowerOn => true,
+            ResetReason::Unknown => true,
+            ResetReason::Brownout => true,
+            ResetReason::TaskWatchdog => true,
+            ResetReason::DeepSleep => false,
+        };
+        if reset_store {
+            println!("Clear and reinit RTC store");
+            unsafe {
+                LAST_WATERING_TIMESTAMP = [0; PLANT_COUNT];
+                CONSECUTIVE_WATERING_PLANT = [0; PLANT_COUNT];
+                LOW_VOLTAGE_DETECTED = false;
+            };
+        } else {
+            println!("Keeping RTC store");
+        }
+
+        let mut counter_unit1 = PcntDriver::new(
+            peripherals.pcnt0,
+            Some(peripherals.pins.gpio18),
+            Option::<AnyInputPin>::None,
+            Option::<AnyInputPin>::None,
+            Option::<AnyInputPin>::None,
+        )?;
+
+        counter_unit1.channel_config(
+            PcntChannel::Channel0,
+            PinIndex::Pin0,
+            PinIndex::Pin1,
+            &PcntChannelConfig {
+                lctrl_mode: PcntControlMode::Reverse,
+                hctrl_mode: PcntControlMode::Keep,
+                pos_mode: PcntCountMode::Decrement,
+                neg_mode: PcntCountMode::Increment,
+                counter_h_lim: i16::MAX,
+                counter_l_lim: 0,
+            },
+        )?;
+
+        //TODO validate filter value! currently max allowed value
+        counter_unit1.set_filter_value(1023)?;
+        counter_unit1.filter_enable()?;
+
+
+        
+        let sys_loop = EspSystemEventLoop::take()?;
+        let nvs = EspDefaultNvsPartition::take()?;
+         let wifi_driver = EspWifi::new(
+            peripherals.modem,
+            sys_loop,
+            Some(nvs)
+        )?; 
+
+        return Ok(PlantCtrlBoard { 
+            shift_register : ShiftRegister24::new(clock, latch, data),
+            last_watering_timestamp : Mutex::new(unsafe { LAST_WATERING_TIMESTAMP }),
+            consecutive_watering_plant : Mutex::new(unsafe { CONSECUTIVE_WATERING_PLANT }),
+            low_voltage_detected : Mutex::new(unsafe { LOW_VOLTAGE_DETECTED }),
+            tank_driver : AdcDriver::new(peripherals.adc1, &Config::new().calibration(true))?,
+            tank_channel: AdcChannelDriver::new(peripherals.pins.gpio39)?,
+            solar_is_day : PinDriver::input(peripherals.pins.gpio25)?,
+            light: PinDriver::output(peripherals.pins.gpio26)?,
+            main_pump: PinDriver::output(peripherals.pins.gpio23)?,
+            tank_power: PinDriver::output(peripherals.pins.gpio27)?,
+            general_fault: PinDriver::output(peripherals.pins.gpio13)?,
+            one_wire_bus: OneWire::new(one_wire_pin).map_err(|err| -> anyhow::Error {anyhow!("Missing attribute: {:?}", err)})?,
+            signal_counter : counter_unit1,
+            wifi_driver : wifi_driver
+        });
+    }
+}
+
+
+pub struct PlantCtrlBoard<'a>{
+    shift_register: ShiftRegister24<OldOutputPin<PinDriver<'a, esp_idf_hal::gpio::Gpio21, esp_idf_hal::gpio::Output>>, OldOutputPin<PinDriver<'a, esp_idf_hal::gpio::Gpio22, esp_idf_hal::gpio::Output>>, OldOutputPin<PinDriver<'a, esp_idf_hal::gpio::Gpio19, esp_idf_hal::gpio::Output>>>,
+    consecutive_watering_plant: Mutex<[u32; PLANT_COUNT]>,
+    last_watering_timestamp: Mutex<[i64; PLANT_COUNT]>,
+    low_voltage_detected: Mutex<bool>,
+    tank_driver: AdcDriver<'a, esp_idf_hal::adc::ADC1>,
+    tank_channel: esp_idf_hal::adc::AdcChannelDriver<'a, { attenuation::DB_11 }, Gpio39 >,
+    solar_is_day: PinDriver<'a, esp_idf_hal::gpio::Gpio25, esp_idf_hal::gpio::Input>,
+    signal_counter: PcntDriver<'a>,
+    light: PinDriver<'a, esp_idf_hal::gpio::Gpio26, esp_idf_hal::gpio::Output>,
+    main_pump: PinDriver<'a, esp_idf_hal::gpio::Gpio23, esp_idf_hal::gpio::Output>,
+    tank_power: PinDriver<'a, esp_idf_hal::gpio::Gpio27, esp_idf_hal::gpio::Output>,
+    general_fault: PinDriver<'a, esp_idf_hal::gpio::Gpio13, esp_idf_hal::gpio::Output>,
+    wifi_driver: EspWifi<'a>,
+    one_wire_bus: OneWire<PinDriver<'a, Gpio4, esp_idf_hal::gpio::InputOutput>>,
+}
+
+impl PlantCtrlBoardInteraction for PlantCtrlBoard<'_> {
+    fn battery_state(&mut self,) -> Result<BatteryState> {
+        todo!()
+    }
+
+    fn is_day(&self,) -> bool {
+        return self.solar_is_day.get_level().into();
+    }
+
+    fn water_temperature_c(&mut self,) -> Result<f32> {
+        let mut delay = Delay::new_default();
+
+        self.one_wire_bus.reset(&mut delay).map_err(|err| -> anyhow::Error {anyhow!("Missing attribute: {:?}", err)})?;
+        let first = self.one_wire_bus.devices(false, &mut delay).next();
+        if first.is_none() {
+            bail!("Not found any one wire  Ds18b20");
+        }
+        let device_address = first.unwrap().map_err(|err| -> anyhow::Error {anyhow!("Missing attribute: {:?}", err)})?;
+
+        let water_temp_sensor = Ds18b20::new::<EspError>(device_address).map_err(|err| -> anyhow::Error {anyhow!("Missing attribute: {:?}", err)})?;
+
+        water_temp_sensor.start_temp_measurement(&mut self.one_wire_bus, &mut delay).map_err(|err| -> anyhow::Error {anyhow!("Missing attribute: {:?}", err)})?;
+        ds18b20::Resolution::Bits12.delay_for_measurement_time(&mut delay);    
+        let sensor_data  = water_temp_sensor.read_data(&mut self.one_wire_bus, &mut delay).map_err(|err| -> anyhow::Error {anyhow!("Missing attribute: {:?}", err)})?;
+        if sensor_data.temperature == 85_f32 {
+            bail!("Ds18b20 dummy temperature returned");
+        }
+        return Ok(sensor_data.temperature);
+    }
+
+    fn tank_sensor_mv(&mut self,) -> Result<u16> {
+        let delay = Delay::new_default();
+        self.tank_power.set_high()?;
+        //let stabilize
+        delay.delay_ms(100);
+        let value = self.tank_driver.read(&mut self.tank_channel)?;
+        self.tank_power.set_low()?;
+        return Ok(value);
+    }
+
+    fn set_low_voltage_in_cycle(&mut self,) {
+        *self.low_voltage_detected.get_mut().unwrap() = true;
+    }
+
+    fn clear_low_voltage_in_cycle(&mut self,) {
+        *self.low_voltage_detected.get_mut().unwrap() = false;
+    }
+
+    fn light(&mut self,enable:bool) -> Result<()>{
+        self.light.set_state(enable.into())?;
+        Ok(())
+    }
+
+    fn pump(&self,plant:usize, enable:bool) -> Result<()> {
+        let index = plant*PINS_PER_PLANT*PLANT_PUMP_OFFSET;
+        //currently infailable error, keep for future as result anyway
+        self.shift_register.decompose()[index].set_state(enable.into()).unwrap();
+        Ok(())
+    }
+
+    fn last_pump_time(&self,plant:usize) -> Result<chrono::DateTime<Utc>> {
+        let ts = unsafe { LAST_WATERING_TIMESTAMP }[plant];
+        let timestamp = NaiveDateTime::from_timestamp_millis(ts).ok_or(anyhow!("could not convert timestamp"))?;
+        return Ok(DateTime::<Utc>::from_naive_utc_and_offset(timestamp, Utc));
+    }
+
+    fn store_last_pump_time(&mut self,plant:usize, time: chrono::DateTime<Utc>) {
+        self.last_watering_timestamp.get_mut().unwrap()[plant] = time.timestamp_millis();
+    }
+
+    fn store_consecutive_pump_count(&mut self,plant:usize, count:u32) {
+        self.consecutive_watering_plant.get_mut().unwrap()[plant] = count;
+    }
+
+    fn consecutive_pump_count(&mut self,plant:usize) -> u32 {
+        return self.consecutive_watering_plant.get_mut().unwrap()[plant]
+    }
+
+    fn fault(&self,plant:usize, enable:bool) {
+        let index = plant*PINS_PER_PLANT*PLANT_FAULT_OFFSET;
+        self.shift_register.decompose()[index].set_state(enable.into()).unwrap()
+    }
+
+    fn low_voltage_in_cycle(&mut self) -> bool {
+        return *self.low_voltage_detected.get_mut().unwrap()
+    }
+
+    fn any_pump(&mut self, enable:bool) -> Result<()> {
+        return Ok(self.main_pump.set_state(enable.into()).unwrap());
+    }
+
+    fn time(&mut self) -> Result<chrono::DateTime<Utc>> {
+        let time = EspSystemTime{}.now().as_millis();
+        let smaller_time = time as i64;
+        let local_time = NaiveDateTime::from_timestamp_millis(smaller_time).ok_or(anyhow!("could not convert timestamp"))?;
+        return Ok(local_time.and_utc());
+    }
+
+    fn sntp(&mut self, max_wait_ms:u32) -> Result<chrono::DateTime<Utc>> {
+        let sntp = sntp::EspSntp::new_default()?;
+        let mut counter = 0;
+        while sntp.get_sync_status() != SyncStatus::Completed{
+            let delay = Delay::new_default();
+            delay.delay_ms(100);
+            counter += 100;
+            if counter > max_wait_ms {
+                bail!("Reached sntp timeout, aborting")
+            }
+        }
+
+        return self.time();
+    }
+
+    fn measure_moisture_hz(&self, plant:usize, sensor:Sensor) -> Result<i32> {
+        self.signal_counter.counter_pause()?;
+        self.signal_counter.counter_clear()?;
+        //
+        let offset = match sensor {
+            Sensor::A => PLANT_MOIST_A_OFFSET,
+            Sensor::B => PLANT_MOIST_B_OFFSET,
+            Sensor::PUMP => PLANT_MOIST_PUMP_OFFSET,
+        };
+        let index = plant*PINS_PER_PLANT*offset;
+        
+        let delay = Delay::new_default();
+        let measurement = 100;
+        let factor = 1000/100;
+
+        self.shift_register.decompose()[index].set_high().unwrap();
+        //give some time to stabilize
+        delay.delay_ms(10);
+        self.signal_counter.counter_resume()?;
+        delay.delay_ms(measurement);
+        self.signal_counter.counter_pause()?;
+        self.shift_register.decompose()[index].set_low().unwrap();
+        let unscaled = self.signal_counter.get_counter_value()? as i32;
+        return Ok(unscaled*factor);
+    }
+
+    fn general_fault(&mut self, enable:bool) {
+        self.general_fault.set_state(enable.into()).unwrap();
+    }
+
+    fn wifi(&mut self, ssid:&str, password:Option<&str>,max_wait:u32) -> Result<()> {
+        match password{
+            Some(pw) => {
+                //TODO expect error due to invalid pw or similar! //call this during configuration and check if works, revert to config mode if not
+                self.wifi_driver.set_configuration(&Configuration::Client(ClientConfiguration{
+                    ssid: ssid.into(),
+                    password: pw.into(),
+                    ..Default::default()
+                }))?;
+            },
+            None => {
+                self.wifi_driver.set_configuration(&Configuration::Client(ClientConfiguration {
+                    ssid: ssid.into(),
+                    auth_method: AuthMethod::None,
+                    ..Default::default()
+                })).unwrap();
+            },
+        }
+
+        self.wifi_driver.start().unwrap();
+        self.wifi_driver.connect().unwrap();
+        
+        let delay = Delay::new_default();
+        let mut counter = 0_u32;
+        while !self.wifi_driver.is_connected().unwrap(){
+            let config = self.wifi_driver.get_configuration().unwrap();
+            println!("Waiting for station {:?}", config);
+            //TODO blink status?
+            delay.delay_ms(250);
+            counter += 250;
+            if counter > max_wait {
+                //ignore these errors, wifi will not be used this
+                self.wifi_driver.disconnect().unwrap_or(());
+                self.wifi_driver.stop().unwrap_or(());
+                bail!("Did not manage wifi connection within timeout");
+            }
+        }
+        println!("Should be connected now");
+        let address = self.wifi_driver.sta_netif().get_ip_info().unwrap();
+        println!("IP info: {:?}", address);
+        return Ok(());
+    }
+
+
+} 

rust/src/webserver/config.html

@@ -0,0 +1,15 @@
+<html>
+    <meta>
+        <script src="ota.js"></script>
+    </meta>
+    <body>
+        <h2>firmeware OTA v3</h2>
+        <form id="upload_form" method="post">
+        <input type="file" name="file1" id="file1" onchange="uploadFile()"><br>
+        <progress id="progressBar" value="0" max="100" style="width:300px;"></progress>
+        <h3 id="status"></h3>
+        <h3 id="answer"></h3>
+        <p id="loaded_n_total"></p>
+        </form>
+    </body>
+</html>

rust/src/webserver/initial_config.html

@@ -0,0 +1,17 @@
+<html>
+    <meta>
+        <script src="ota.js"></script>
+    </meta>
+    <body>
+        <div>
+            <h2>firmeware OTA v3</h2>
+            <form id="upload_form" method="post">
+            <input type="file" name="file1" id="file1" onchange="uploadFile()"><br>
+            <progress id="progressBar" value="0" max="100" style="width:300px;"></progress>
+            <h3 id="status"></h3>
+            <h3 id="answer"></h3>
+            <p id="loaded_n_total"></p>
+            </form>
+        </div>
+    </body>
+</html>

rust/src/webserver/ota.js

@@ -0,0 +1,40 @@
+function _(el) {
+    return document.getElementById(el);
+  }
+  
+  function uploadFile() {
+    var file = _("file1").files[0];
+    // alert(file.name+" | "+file.size+" | "+file.type);
+    var ajax = new XMLHttpRequest();
+    ajax.upload.addEventListener("progress", progressHandler, false);
+    ajax.addEventListener("load", completeHandler, false);
+    ajax.addEventListener("error", errorHandler, false);
+    ajax.addEventListener("abort", abortHandler, false);
+    ajax.open("POST", "/ota"); // http://www.developphp.com/video/JavaScript/File-Upload-Progress-Bar-Meter-Tutorial-Ajax-PHP
+    //use file_upload_parser.php from above url
+    ajax.send(file);
+  }
+  
+  function progressHandler(event) {
+    _("loaded_n_total").innerHTML = "Uploaded " + event.loaded + " bytes of " + event.total;
+    var percent = (event.loaded / event.total) * 100;
+    _("progressBar").value = Math.round(percent);
+    _("status").innerHTML = Math.round(percent) + "%";
+    _("answer").innerHTML = "in progress";
+  }
+  
+  function completeHandler(event) {
+    _("status").innerHTML = event.target.responseText;
+    _("answer").innerHTML = "finished";
+    _("progressBar").value = 0; //wil clear progress bar after successful upload
+  }
+  
+  function errorHandler(event) {
+    _("status").innerHTML = event.target.responseText;
+    _("answer").innerHTML = "failed";
+  }
+  
+  function abortHandler(event) {
+    _("status").innerHTML = event.target.responseText;
+    _("answer").innerHTML = "aborted";
+  }

rust/src/webserver/webserver.rs

@@ -0,0 +1,88 @@
+//offer ota and config mode
+
+use build_time::build_time_utc;
+use embedded_svc::http::Method;
+use esp_idf_svc::http::server::EspHttpServer;
+use esp_ota::OtaUpdate;
+
+#[allow(unused_variables)]
+pub fn httpd(initial_config:bool) -> EspHttpServer<'static> {
+
+    let mut server = EspHttpServer::new(&Default::default()).unwrap();
+
+    server
+        .fn_handler("/",Method::Get, move |request| {
+            let mut response = request.into_ok_response()?;
+            match initial_config {
+                true => response.write(include_bytes!("initial_config.html"))?,
+                false => response.write(include_bytes!("config.html"))?
+            };
+            return Ok(())
+        }).unwrap();
+    server
+        .fn_handler("/buildtime",Method::Get,  |request| {
+            let mut response = request.into_ok_response()?;
+            response.write(build_time_utc!().as_bytes())?;
+            return Ok(())
+        }).unwrap();
+    server
+        .fn_handler("/ota.js",Method::Get, |request| {
+            let mut response = request.into_ok_response()?;
+            response.write(include_bytes!("ota.js"))?;
+            return Ok(())
+        }).unwrap();
+
+    server
+        .fn_handler("/ota", Method::Post,  |mut request| {
+            let ota = OtaUpdate::begin();
+            if ota.is_err(){
+                let error_text = ota.unwrap_err().to_string();
+                request.into_status_response(500)?.write(error_text.as_bytes())?;
+                return Ok(());
+            }
+            let mut ota = ota.unwrap();
+            println!("start ota");
+            
+            //having a larger buffer is not really faster, requires more stack and prevents the progress bar from working ;)
+            const BUFFER_SIZE:usize = 512;
+            let mut buffer :[u8;BUFFER_SIZE] = [0;BUFFER_SIZE];
+            let mut total_read: usize = 0;
+            loop {
+                let read = request.read(&mut buffer).unwrap();
+                total_read += read;
+                println!("received {read} bytes ota {total_read}");
+                let to_write =  & buffer[0 .. read];
+
+                
+                let write_result = ota.write(to_write);
+                if write_result.is_err(){
+                    let error_text = write_result.unwrap_err().to_string();
+                    request.into_status_response(500)?.write(error_text.as_bytes())?;
+                    return Ok(());
+                }
+                println!("wrote {read} bytes ota {total_read}");
+                if read == 0 {
+                    break;
+                }
+            }
+            println!("finish ota");
+            let partition = ota.raw_partition();
+            println!("finalizing and changing boot partition to {partition:?}");
+
+            let finalizer = ota.finalize();
+            if finalizer.is_err(){
+                let error_text = finalizer.err().unwrap().to_string();
+                request.into_status_response(500)?.write(error_text.as_bytes())?;
+                return Ok(());
+            }
+            let mut finalizer = finalizer.unwrap();
+            
+            println!("changing boot partition");
+            finalizer.set_as_boot_partition().unwrap();
+            finalizer.restart();
+
+        
+            //return Ok(())
+        }).unwrap();
+    return server;
+}