PlantCtrl/rust/src/plant_hal.rs

//mod config;

use embedded_svc::wifi::{
    AccessPointConfiguration, AuthMethod, ClientConfiguration, Configuration, AccessPointInfo,
};
use esp_idf_svc::eventloop::EspSystemEventLoop;
use esp_idf_svc::nvs::EspDefaultNvsPartition;
use esp_idf_svc::wifi::config::{ScanConfig, ScanType};
use esp_idf_svc::wifi::EspWifi;
use plant_ctrl2::sipo::ShiftRegister40;

use anyhow::anyhow;
use anyhow::{bail, Ok, Result};
use std::ffi::CString;
use std::fs::File;
use std::io::Read;
use std::path::Path;
use std::str::from_utf8;
use std::sync::{Mutex, Arc};
use std::time::Duration;

use chrono::{DateTime, NaiveDateTime, Utc};
use ds18b20::Ds18b20;

use embedded_hal::digital::v2::OutputPin;
use esp_idf_hal::adc::config::Config;
use esp_idf_hal::adc::{attenuation, AdcChannelDriver, AdcDriver};
use esp_idf_hal::delay::Delay;
use esp_idf_hal::gpio::{AnyInputPin, Gpio39, Gpio4, Level, PinDriver};
use esp_idf_hal::pcnt::{
    PcntChannel, PcntChannelConfig, PcntControlMode, PcntCountMode, PcntDriver, PinIndex,
};
use esp_idf_hal::prelude::Peripherals;
use esp_idf_hal::reset::ResetReason;
use esp_idf_svc::sntp::{self, SyncStatus};
use esp_idf_svc::systime::EspSystemTime;
use esp_idf_sys::{EspError, vTaskDelay};
use one_wire_bus::OneWire;

use crate::config::{self, WifiConfig};

pub const PLANT_COUNT: usize = 8;
const PINS_PER_PLANT: usize = 5;
const PLANT_PUMP_OFFSET: usize = 0;
const PLANT_FAULT_OFFSET: usize = 1;
const PLANT_MOIST_PUMP_OFFSET: usize = 2;
const PLANT_MOIST_B_OFFSET: usize = 3;
const PLANT_MOIST_A_OFFSET: usize = 4;

const SPIFFS_PARTITION_NAME: &str = "storage";
const WIFI_CONFIG_FILE: &str = "/spiffs/wifi.cfg";
const CONFIG_FILE: &str = "/spiffs/config.cfg";

#[link_section = ".rtc.data"]
static mut LAST_WATERING_TIMESTAMP: [i64; PLANT_COUNT] = [0; PLANT_COUNT];
#[link_section = ".rtc.data"]
static mut CONSECUTIVE_WATERING_PLANT: [u32; PLANT_COUNT] = [0; PLANT_COUNT];
#[link_section = ".rtc.data"]
static mut LOW_VOLTAGE_DETECTED: bool = false;

pub struct BatteryState {
    state_charge_percent: u8,
    max_error_percent: u8,
    remaining_milli_ampere_hour: u32,
    max_milli_ampere_hour: u32,
    design_milli_ampere_hour: u32,
    voltage_milli_volt: u16,
    average_current_milli_ampere: u16,
    temperature_tenth_kelvin: u32,
    average_time_to_empty_minute: u16,
    average_time_to_full_minute: u16,
    average_discharge_power_cycle_milli_watt: u16,
    cycle_count: u16,
    state_health_percent: u8,
}

pub struct FileSystemSizeInfo {
    pub total_size: usize,
    pub used_size: usize,
    pub free_size: usize,
}

#[derive(Debug)]
pub enum Sensor {
    A,
    B,
    PUMP,
}
pub trait PlantCtrlBoardInteraction {
    fn time(&mut self) -> Result<chrono::DateTime<Utc>>;
    fn wifi(&mut self, ssid: &str, password: Option<&str>, max_wait: u32) -> Result<()>;
    fn sntp(&mut self, max_wait: u32) -> Result<chrono::DateTime<Utc>>;
    fn mountFileSystem(&mut self) -> Result<()>;
    fn fileSystemSize(&mut self) -> Result<FileSystemSizeInfo>;

    fn battery_state(&mut self) -> Result<BatteryState>;

    fn general_fault(&mut self, enable: bool);

    fn is_day(&self) -> bool;
    fn water_temperature_c(&mut self) -> Result<f32>;
    fn tank_sensor_mv(&mut self) -> Result<u16>;

    fn set_low_voltage_in_cycle(&mut self);
    fn clear_low_voltage_in_cycle(&mut self);
    fn low_voltage_in_cycle(&mut self) -> bool;
    fn any_pump(&mut self, enabled: bool) -> Result<()>;

    //keep state during deepsleep
    fn light(&mut self, enable: bool) -> Result<()>;

    fn measure_moisture_hz(&self, plant: usize, sensor: Sensor) -> Result<i32>;
    fn pump(&self, plant: usize, enable: bool) -> Result<()>;
    fn last_pump_time(&self, plant: usize) -> Result<chrono::DateTime<Utc>>;
    fn store_last_pump_time(&mut self, plant: usize, time: chrono::DateTime<Utc>);
    fn store_consecutive_pump_count(&mut self, plant: usize, count: u32);
    fn consecutive_pump_count(&mut self, plant: usize) -> u32;

    //keep state during deepsleep
    fn fault(&self, plant: usize, enable: bool);

    //config
    fn is_config_reset(&mut self) -> bool;
    fn remove_configs(&mut self) -> Result<()>;
    fn get_config(&mut self) -> Result<config::Config>;
    fn get_wifi(&mut self) -> Result<config::WifiConfig>;
    fn set_wifi(&mut self, wifi: &WifiConfig) -> Result<()>;
    fn wifi_ap(&mut self) -> Result<()>;
    fn wifi_scan(&mut self) -> Result<Vec<AccessPointInfo>>;
    fn test(&mut self) -> Result<()>;
}

pub trait CreatePlantHal<'a> {
    fn create() -> Result<Arc<Mutex<PlantCtrlBoard<'static>>>>;
}

pub struct PlantHal {}

impl CreatePlantHal<'_> for PlantHal {
    fn create() -> Result<Arc<Mutex<PlantCtrlBoard<'static>>>> {
        let peripherals = Peripherals::take()?;

        let mut clock = PinDriver::output(peripherals.pins.gpio21)?;
        let mut latch = PinDriver::output(peripherals.pins.gpio22)?;
        let mut data = PinDriver::output(peripherals.pins.gpio19)?;

        let one_wire_pin = PinDriver::input_output_od(peripherals.pins.gpio4)?;
        //TODO make to none if not possible to init

        //init,reset rtc memory depending on cause
        let reasons = ResetReason::get();
        let reset_store = match reasons {
            ResetReason::Software => false,
            ResetReason::ExternalPin => false,
            ResetReason::Watchdog => true,
            ResetReason::Sdio => true,
            ResetReason::Panic => true,
            ResetReason::InterruptWatchdog => true,
            ResetReason::PowerOn => true,
            ResetReason::Unknown => true,
            ResetReason::Brownout => true,
            ResetReason::TaskWatchdog => true,
            ResetReason::DeepSleep => false,
        };
        if reset_store {
            println!("Clear and reinit RTC store");
            unsafe {
                LAST_WATERING_TIMESTAMP = [0; PLANT_COUNT];
                CONSECUTIVE_WATERING_PLANT = [0; PLANT_COUNT];
                LOW_VOLTAGE_DETECTED = false;
            };
        } else {
            println!("Keeping RTC store");
        }

        let mut counter_unit1 = PcntDriver::new(
            peripherals.pcnt0,
            Some(peripherals.pins.gpio18),
            Option::<AnyInputPin>::None,
            Option::<AnyInputPin>::None,
            Option::<AnyInputPin>::None,
        )?;

        println!("Channel config start");

        counter_unit1.channel_config(
            PcntChannel::Channel0,
            PinIndex::Pin0,
            PinIndex::Pin1,
            &PcntChannelConfig {
                lctrl_mode: PcntControlMode::Reverse,
                hctrl_mode: PcntControlMode::Keep,
                pos_mode: PcntCountMode::Decrement,
                neg_mode: PcntCountMode::Increment,
                counter_h_lim: i16::MAX,
                counter_l_lim: 0,
            },
        )?;

        println!("Setup filter");

        //TODO validate filter value! currently max allowed value
        counter_unit1.set_filter_value(1023)?;
        counter_unit1.filter_enable()?;

        println!("Wifi start");

        let sys_loop = EspSystemEventLoop::take()?;
        let nvs = EspDefaultNvsPartition::take()?;
        let wifi_driver = EspWifi::new(peripherals.modem, sys_loop, Some(nvs))?;

        let shift_register = ShiftRegister40::new(clock, latch, data);
        let last_watering_timestamp = Mutex::new(unsafe { LAST_WATERING_TIMESTAMP });
        let consecutive_watering_plant = Mutex::new(unsafe { CONSECUTIVE_WATERING_PLANT });
        let low_voltage_detected = Mutex::new(unsafe { LOW_VOLTAGE_DETECTED });
        let tank_driver = AdcDriver::new(peripherals.adc1, &Config::new())?;
        let tank_channel: AdcChannelDriver<'_, { attenuation::DB_11 }, Gpio39> =
            AdcChannelDriver::new(peripherals.pins.gpio39)?;
        let solar_is_day = PinDriver::input(peripherals.pins.gpio25)?;
        let boot_button = PinDriver::input(peripherals.pins.gpio0)?;
        let light = PinDriver::output(peripherals.pins.gpio26)?;
        let main_pump = PinDriver::output(peripherals.pins.gpio23)?;
        let tank_power = PinDriver::output(peripherals.pins.gpio27)?;
        let general_fault = PinDriver::output(peripherals.pins.gpio13)?;
        let one_wire_bus = OneWire::new(one_wire_pin)
            .map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;

        println!("After stuff");


        let rv = Arc::new(Mutex::new(PlantCtrlBoard {
            shift_register : shift_register,
            last_watering_timestamp: last_watering_timestamp,
            consecutive_watering_plant: consecutive_watering_plant,
            low_voltage_detected: low_voltage_detected,
            tank_driver: tank_driver,
            tank_channel: tank_channel,
            solar_is_day: solar_is_day,
            boot_button: boot_button,
            light: light,
            main_pump: main_pump,
            tank_power: tank_power,
            general_fault: general_fault,
            one_wire_bus: one_wire_bus,
            signal_counter: counter_unit1,
            wifi_driver: wifi_driver,
        }));
        return Ok(rv);
    }
}

pub struct PlantCtrlBoard<'a> {
    shift_register: ShiftRegister40<PinDriver<'a, esp_idf_hal::gpio::Gpio21, esp_idf_hal::gpio::Output>, PinDriver<'a, esp_idf_hal::gpio::Gpio22, esp_idf_hal::gpio::Output>, PinDriver<'a, esp_idf_hal::gpio::Gpio19, esp_idf_hal::gpio::Output>>,
    consecutive_watering_plant: Mutex<[u32; PLANT_COUNT]>,
    last_watering_timestamp: Mutex<[i64; PLANT_COUNT]>,
    low_voltage_detected: Mutex<bool>,
    tank_driver: AdcDriver<'a, esp_idf_hal::adc::ADC1>,
    tank_channel: esp_idf_hal::adc::AdcChannelDriver<'a, { attenuation::DB_11 }, Gpio39>,
    solar_is_day: PinDriver<'a, esp_idf_hal::gpio::Gpio25, esp_idf_hal::gpio::Input>,
    boot_button: PinDriver<'a, esp_idf_hal::gpio::Gpio0, esp_idf_hal::gpio::Input>,
    signal_counter: PcntDriver<'a>,
    light: PinDriver<'a, esp_idf_hal::gpio::Gpio26, esp_idf_hal::gpio::Output>,
    main_pump: PinDriver<'a, esp_idf_hal::gpio::Gpio23, esp_idf_hal::gpio::Output>,
    tank_power: PinDriver<'a, esp_idf_hal::gpio::Gpio27, esp_idf_hal::gpio::Output>,
    general_fault: PinDriver<'a, esp_idf_hal::gpio::Gpio13, esp_idf_hal::gpio::Output>,
    pub wifi_driver: EspWifi<'a>,
    one_wire_bus: OneWire<PinDriver<'a, Gpio4, esp_idf_hal::gpio::InputOutput>>,
}

impl PlantCtrlBoardInteraction for PlantCtrlBoard<'_> {
    fn battery_state(&mut self) -> Result<BatteryState> {
        todo!()
    }

    fn is_day(&self) -> bool {
        return self.solar_is_day.get_level().into();
    }

    fn water_temperature_c(&mut self) -> Result<f32> {
        let mut delay = Delay::new_default();

        self.one_wire_bus
            .reset(&mut delay)
            .map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;
        let first = self.one_wire_bus.devices(false, &mut delay).next();
        if first.is_none() {
            bail!("Not found any one wire  Ds18b20");
        }
        let device_address = first
            .unwrap()
            .map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;

        let water_temp_sensor = Ds18b20::new::<EspError>(device_address)
            .map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;

        water_temp_sensor
            .start_temp_measurement(&mut self.one_wire_bus, &mut delay)
            .map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;
        ds18b20::Resolution::Bits12.delay_for_measurement_time(&mut delay);
        let sensor_data = water_temp_sensor
            .read_data(&mut self.one_wire_bus, &mut delay)
            .map_err(|err| -> anyhow::Error { anyhow!("Missing attribute: {:?}", err) })?;
        if sensor_data.temperature == 85_f32 {
            bail!("Ds18b20 dummy temperature returned");
        }
        return Ok(sensor_data.temperature);
    }

    fn tank_sensor_mv(&mut self) -> Result<u16> {
        let delay = Delay::new_default();
        self.tank_power.set_high()?;
        //let stabilize
        delay.delay_ms(100);
        let value = self.tank_driver.read(&mut self.tank_channel)?;
        self.tank_power.set_low()?;
        return Ok(value);
    }

    fn set_low_voltage_in_cycle(&mut self) {
        *self.low_voltage_detected.get_mut().unwrap() = true;
    }

    fn clear_low_voltage_in_cycle(&mut self) {
        *self.low_voltage_detected.get_mut().unwrap() = false;
    }

    fn light(&mut self, enable: bool) -> Result<()> {
        self.light.set_state(enable.into())?;
        Ok(())
    }

    fn pump(&self, plant: usize, enable: bool) -> Result<()> {
        let index = plant * PINS_PER_PLANT + PLANT_PUMP_OFFSET;
        //currently infailable error, keep for future as result anyway
        self.shift_register.decompose()[index].set_state(enable.into()).unwrap();
        Ok(())
    }

    fn last_pump_time(&self, plant: usize) -> Result<chrono::DateTime<Utc>> {
        let ts = unsafe { LAST_WATERING_TIMESTAMP }[plant];
        let timestamp = NaiveDateTime::from_timestamp_millis(ts)
            .ok_or(anyhow!("could not convert timestamp"))?;
        return Ok(DateTime::<Utc>::from_naive_utc_and_offset(timestamp, Utc));
    }

    fn store_last_pump_time(&mut self, plant: usize, time: chrono::DateTime<Utc>) {
        self.last_watering_timestamp.get_mut().unwrap()[plant] = time.timestamp_millis();
    }

    fn store_consecutive_pump_count(&mut self, plant: usize, count: u32) {
        self.consecutive_watering_plant.get_mut().unwrap()[plant] = count;
    }

    fn consecutive_pump_count(&mut self, plant: usize) -> u32 {
        return self.consecutive_watering_plant.get_mut().unwrap()[plant];
    }

    fn fault(&self, plant: usize, enable: bool) {
        let index = plant * PINS_PER_PLANT + PLANT_FAULT_OFFSET;
        self.shift_register.decompose()[index].set_state(enable.into()).unwrap()
    }

    fn low_voltage_in_cycle(&mut self) -> bool {
        return *self.low_voltage_detected.get_mut().unwrap();
    }

    fn any_pump(&mut self, enable: bool) -> Result<()> {
        return Ok(self.main_pump.set_state(enable.into()).unwrap());
    }

    fn time(&mut self) -> Result<chrono::DateTime<Utc>> {
        let time = EspSystemTime {}.now().as_millis();
        let smaller_time = time as i64;
        let local_time = NaiveDateTime::from_timestamp_millis(smaller_time)
            .ok_or(anyhow!("could not convert timestamp"))?;
        return Ok(local_time.and_utc());
    }

    fn sntp(&mut self, max_wait_ms: u32) -> Result<chrono::DateTime<Utc>> {
        let sntp = sntp::EspSntp::new_default()?;
        let mut counter = 0;
        while sntp.get_sync_status() != SyncStatus::Completed {
            let delay = Delay::new_default();
            delay.delay_ms(100);
            counter += 100;
            if counter > max_wait_ms {
                bail!("Reached sntp timeout, aborting")
            }
        }

        return self.time();
    }

    fn measure_moisture_hz(&self, plant: usize, sensor: Sensor) -> Result<i32> {
        self.signal_counter.counter_pause()?;
        self.signal_counter.counter_clear()?;
        //
        let offset = match sensor {
            Sensor::A => PLANT_MOIST_A_OFFSET,
            Sensor::B => PLANT_MOIST_B_OFFSET,
            Sensor::PUMP => PLANT_MOIST_PUMP_OFFSET,
        };
        let index = plant * PINS_PER_PLANT + offset;

        let delay = Delay::new_default();
        let measurement = 100;
        let factor = 1000 / 100;

        self.shift_register.decompose()[index].set_high().unwrap();
        //give some time to stabilize
        delay.delay_ms(10);
        self.signal_counter.counter_resume()?;
        delay.delay_ms(measurement);
        self.signal_counter.counter_pause()?;
        self.shift_register.decompose()[index].set_low().unwrap();
        let unscaled = self.signal_counter.get_counter_value()? as i32;
        let hz = unscaled * factor;
        println!("Measuring {:?} @ {} with {}", sensor, plant, hz);
        return Ok(hz);
    }

    fn general_fault(&mut self, enable: bool) {
        self.general_fault.set_state(enable.into()).unwrap();
    }

    fn wifi_ap(&mut self) -> Result<()> {

        let apconfig = AccessPointConfiguration {
            ssid: "PlantCtrl".into(),
            auth_method: AuthMethod::None,
            ssid_hidden: false,
            ..Default::default()
        };
        let clientconfig = ClientConfiguration::default();
        self.wifi_driver.set_configuration(&Configuration::Mixed(clientconfig, apconfig))?;
        self.wifi_driver.start()?;
        Ok(())
    }

    fn wifi(&mut self, ssid: &str, password: Option<&str>, max_wait: u32) -> Result<()> {
        match password {
            Some(pw) => {
                //TODO expect error due to invalid pw or similar! //call this during configuration and check if works, revert to config mode if not
                self.wifi_driver.set_configuration(&Configuration::Client(
                    ClientConfiguration {
                        ssid: ssid.into(),
                        password: pw.into(),
                        ..Default::default()
                    },
                ))?;
            }
            None => {
                self.wifi_driver
                    .set_configuration(&Configuration::Client(ClientConfiguration {
                        ssid: ssid.into(),
                        auth_method: AuthMethod::None,
                        ..Default::default()
                    }))
                    .unwrap();
            }
        }

        self.wifi_driver.start()?;
        self.wifi_driver.connect()?;

        let delay = Delay::new_default();
        let mut counter = 0_u32;
        while !self.wifi_driver.is_connected()? {
            println!("Waiting for station connection");
            //TODO blink status?
            delay.delay_ms(250);
            counter += 250;
            if counter > max_wait {
                //ignore these errors, wifi will not be used this
                self.wifi_driver.disconnect().unwrap_or(());
                self.wifi_driver.stop().unwrap_or(());
                bail!("Did not manage wifi connection within timeout");
            }
        }
        println!("Should be connected now");

        while self.wifi_driver.is_up().unwrap() == false {
            println!("Waiting for network being up");
            delay.delay_ms(250);
            counter += 250;
            if counter > max_wait {
                //ignore these errors, wifi will not be used this
                self.wifi_driver.disconnect().unwrap_or(());
                self.wifi_driver.stop().unwrap_or(());
                bail!("Did not manage wifi connection within timeout");
            }
        }
        //update freertos registers ;)
        let address = self.wifi_driver.sta_netif().get_ip_info().unwrap();
        println!("IP info: {:?}", address);
        return Ok(());
    }

    fn mountFileSystem(&mut self) -> Result<()> {
        let base_path = CString::new("/spiffs")?;
        let storage = CString::new(SPIFFS_PARTITION_NAME)?;
        let conf = esp_idf_sys::esp_vfs_spiffs_conf_t {
            base_path: base_path.as_ptr(),
            partition_label: storage.as_ptr(),
            max_files: 2,
            format_if_mount_failed: true,
        };

        unsafe {
            esp_idf_sys::esp!(esp_idf_sys::esp_vfs_spiffs_register(&conf))?;
            Ok(())
        }
    }

    fn fileSystemSize(&mut self) -> Result<FileSystemSizeInfo> {
        let storage = CString::new(SPIFFS_PARTITION_NAME)?;
        let mut total_size = 0;
        let mut used_size = 0;
        unsafe {
            esp_idf_sys::esp!(esp_idf_sys::esp_spiffs_info(
                storage.as_ptr(),
                &mut total_size,
                &mut used_size
            ))?;
        }
        return Ok(FileSystemSizeInfo {
            total_size,
            used_size,
            free_size: total_size - used_size,
        });
    }

    fn is_config_reset(&mut self) -> bool {
        return self.boot_button.get_level() == Level::Low;
    }

    fn remove_configs(&mut self) -> Result<()> {
        let wifi_config = Path::new(WIFI_CONFIG_FILE);
        if wifi_config.exists() {
            println!("Removing wifi config");
            std::fs::remove_file(wifi_config)?;
        }

        let config = Path::new(CONFIG_FILE);
        if config.exists() {
            println!("Removing config");
            std::fs::remove_file(config)?;
        }
        Ok(())
    }

    fn get_wifi(&mut self) -> Result<config::WifiConfig> {
        let cfg = File::open(WIFI_CONFIG_FILE)?;
        let config: WifiConfig = serde_json::from_reader(cfg)?;
        return Ok(config);
    }

    fn set_wifi(&mut self, wifi: &WifiConfig) -> Result<()> {
        let mut cfg = File::create(WIFI_CONFIG_FILE)?;
        serde_json::to_writer(&mut cfg, &wifi)?;
        println!("Wrote wifi config {}", wifi);
        return Ok(());
    }

    fn get_config(&mut self) -> Result<config::Config> {
        let mut cfg = File::open(CONFIG_FILE)?;
        let mut data: [u8; 512] = [0; 512];
        let read = cfg.read(&mut data)?;
        println!("Read file {}", from_utf8(&data[0..read])?);

        bail!("todo")
    }

    fn wifi_scan(&mut self) -> Result<Vec<AccessPointInfo>> {
        //remove this parts
        for i in 1..11 {
            println!("Scanning channel {}", i);
            self.wifi_driver.start_scan(&ScanConfig{
                scan_type : ScanType::Passive(Duration::from_secs(1)),
                show_hidden: false,
                channel: Some(i),
                ..Default::default()
            }, true)?;
            let sr = self.wifi_driver.get_scan_result()?;
            for r in sr.iter(){
                println!("Found wifi {}", r.ssid);
            }
        }

        self.wifi_driver.start_scan(&ScanConfig{
            scan_type : ScanType::Passive(Duration::from_secs(1)),
            show_hidden: false,
            ..Default::default()
        }, true)?;
        return Ok(self.wifi_driver.get_scan_result()?);
    }

    fn test(&mut self) -> Result<()> {
        self.general_fault(true);
        unsafe { vTaskDelay(100) };
        self.general_fault(false);
        unsafe { vTaskDelay(100) };
        self.any_pump(true)?;
        unsafe { vTaskDelay(500) };
        self.any_pump(false)?;
        unsafe { vTaskDelay(500) };
        self.light(true)?;
        unsafe { vTaskDelay(500) };
        self.light(false)?;
        unsafe { vTaskDelay(500) };
        for i in 0 .. 8{
            self.fault(i, true);
            unsafe { vTaskDelay(500) };
            self.fault(i, false);
            unsafe { vTaskDelay(500) };
        }
        for i in 0 .. 8{
            self.pump(i, true)?;
            unsafe { vTaskDelay(500) };
            self.pump(i, false)?;
            unsafe { vTaskDelay(500) };
        }
        for i in 0 .. 8{
            self.measure_moisture_hz(i, Sensor::A)?;
            unsafe { vTaskDelay(500) };
        }
        for i in 0 .. 8{
            self.measure_moisture_hz(i, Sensor::B)?;
            unsafe { vTaskDelay(500) };
        }
        for i in 0 .. 8{
            self.measure_moisture_hz(i, Sensor::PUMP)?;
            unsafe { vTaskDelay(500) };
        }

        return Ok(());
    }
}