initial code

rust/Cargo.toml

@@ -1,17 +1,41 @@
 [package]
-name = "rust"
+name = "plant-ctrl2"
 version = "0.1.0"
-authors = ["Empire <empirephoenix@yahoo.de>"]
+authors = ["Empire Phoenix"]
 edition = "2021"
 resolver = "2"
 rust-version = "1.71"
 
-[profile.release]
+[profile.dev]
+# Explicitly disable LTO which the Xtensa codegen backend has issues
+lto = false
+strip = false
+debug = true 
+overflow-checks = true
+panic = "abort"
+incremental = true
 opt-level = "s"
 
-[profile.dev]
-debug = true    # Symbols are nice and they don't increase the size on Flash
-opt-level = "z"
+[profile.dev.build-override]
+opt-level = 1
+incremental = true
+
+[package.metadata.cargo_runner]
+# The string `$TARGET_FILE` will be replaced with the path from cargo.
+command = [
+    "cargo",
+    "espflash",
+    "save-image",
+    "--partition-table",
+    "partitions.csv",
+    "--chip",
+    "esp32c6",
+    "image.bin"
+]
+
+
+[package.metadata.espflash]
+partition_table = "partitions.csv"
 
 [features]
 default = ["std", "embassy", "esp-idf-svc/native"]
@@ -25,11 +49,36 @@ embassy = ["esp-idf-svc/embassy-sync", "esp-idf-svc/critical-section", "esp-idf-
 
 [dependencies]
 log = { version = "0.4", default-features = false }
-esp-idf-svc = { version = "0.48", default-features = false }
+serde = { version = "1.0.192",  features = ["derive"] }
+average = { version = "0.14.1" , features = ["std"] }
+#esp32 = "0.28.0"
+bit_field = "0.10.2"
+ds18b20 = "0.1.1"
 embedded-svc = { version = "0.27.0", features = ["experimental"] }
 esp-idf-hal = "0.43.0"
 esp-idf-sys = { version = "0.34.0", features = ["binstart", "native"] }
+esp-idf-svc = { version = "0.48.0", default-features = false }
 esp_idf_build = "0.1.3"
+chrono = { version = "0.4.23", default-features = false , features = ["iana-time-zone" , "alloc"] }
+chrono-tz = {version="0.8.0", default-features = false , features = [ "filter-by-regex" ]}
+embedded-hal = "1.0.0"
+one-wire-bus = "0.1.1"
+anyhow = { version = "1.0.75", features = ["std", "backtrace"] }
+schemars = "0.8.16"
+heapless = { version = "0.8", features = ["serde"] }
+serde_json = "1.0.108"
+strum = { version = "0.26.1", features = ["derive"] }
+once_cell = "1.19.0"
+measurements = "0.11.0"
+bq34z100 = "0.2.1"
+
+[patch.crates-io]
+#esp-idf-hal = { git = "https://github.com/esp-rs/esp-idf-hal.git" }
+esp-idf-hal = { git = "https://github.com/empirephoenix/esp-idf-hal.git" }
+#esp-idf-sys = { git = "https://github.com/empirephoenix/esp-idf-sys.git" }
+#esp-idf-sys = { git = "https://github.com/esp-rs/esp-idf-sys.git" }
+#esp-idf-svc = { git = "https://github.com/esp-rs/esp-idf-svc.git" }
 
 [build-dependencies]
 embuild = "0.31.3"
+vergen = { version = "8.2.6", features = ["build", "git", "gitcl"] }

rust/sdkconfig.defaults

@@ -1,10 +1,10 @@
 # Rust often needs a bit of an extra main task stack size compared to C (the default is 3K)
-CONFIG_ESP_MAIN_TASK_STACK_SIZE=8000
+CONFIG_ESP_MAIN_TASK_STACK_SIZE=25000
 
 # Use this to set FreeRTOS kernel tick frequency to 1000 Hz (100 Hz by default).
 # This allows to use 1 ms granuality for thread sleeps (10 ms by default).
-#CONFIG_FREERTOS_HZ=1000
+CONFIG_FREERTOS_HZ=1000
 
-# Workaround for https://github.com/espressif/esp-idf/issues/7631
-#CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=n
-#CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=n
+CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE=y
+CONFIG_I2C_ENABLE_DEBUG_LOG=y
+DEBUG_LEVEL=5

rust/src/main.rs

@@ -1,19 +1,31 @@
-use esp_idf_hal::gpio::{AnyInputPin, Gpio10, Gpio6, Gpio5, InputOutput, Level, PinDriver, Pull};
-use esp_idf_svc::hal::{peripheral::Peripheral, peripherals::Peripherals};
-use esp_idf_sys::{esp, gpio_hold_dis, gpio_hold_en, vTaskDelay, EspError};
-use esp_idf_hal::delay::Delay;
-use std::time::Duration;
-use esp_idf_svc::eventloop::EspSystemEventLoop;
-use esp_idf_svc::ipv4::IpInfo;
-use esp_idf_svc::mqtt::client::QoS::AtLeastOnce;
-use esp_idf_svc::mqtt::client::QoS::ExactlyOnce;
-use esp_idf_svc::mqtt::client::{EspMqttClient, LwtConfiguration, MqttClientConfiguration};
-use esp_idf_svc::nvs::EspDefaultNvsPartition;
-use esp_idf_svc::wifi::config::{ScanConfig, ScanType};
-use esp_idf_svc::wifi::EspWifi;
-use esp_idf_hal::adc::{attenuation, AdcChannelDriver, AdcDriver};
+use std::sync::Mutex;
 
-fn main() {
+use chrono::{DateTime, Datelike, Timelike};
+use chrono_tz::Europe::Berlin;
+
+use esp_idf_hal::delay::Delay;
+use esp_idf_sys::
+    esp_restart
+;
+use log::error;
+use once_cell::sync::Lazy;
+use plant_hal::{CreatePlantHal, PlantCtrlBoard, PlantCtrlBoardInteraction, PlantHal};
+use serde::{Deserialize, Serialize};
+
+pub mod plant_hal;
+
+#[derive(Serialize, Deserialize, Copy, Clone, Debug, PartialEq)]
+enum OnlineMode {
+    Offline,
+    Wifi,
+    SnTp,
+    Online,
+}
+
+pub static BOARD_ACCESS: Lazy<Mutex<PlantCtrlBoard>> = Lazy::new(|| PlantHal::create().unwrap());
+
+
+fn safe_main() -> anyhow::Result<()> {
     // It is necessary to call this function once. Otherwise some patches to the runtime
     // implemented by esp-idf-sys might not link properly. See https://github.com/esp-rs/esp-idf-template/issues/71
     esp_idf_svc::sys::link_patches();
@@ -21,54 +33,127 @@ fn main() {
     // Bind the log crate to the ESP Logging facilities
     esp_idf_svc::log::EspLogger::initialize_default();
 
-    log::info!("Hello, world!");
-
-    let mut peripherals = Peripherals::take().unwrap();
-    let mut in1 = PinDriver::input_output(peripherals.pins.gpio7).unwrap();
-    let mut in2 = PinDriver::input_output(peripherals.pins.gpio6).unwrap();
-
-    let sys_loop = EspSystemEventLoop::take().unwrap();
-    let nvs = EspDefaultNvsPartition::take().unwrap();
-    let mut wifi_driver = EspWifi::new(peripherals.modem, sys_loop, Some(nvs)).unwrap();
-    wifi_driver.start().unwrap();
-    wifi_driver.start_scan(
-        &ScanConfig {
-            scan_type: ScanType::Passive(Duration::from_secs(1)),
-            show_hidden: false,
-            ..Default::default()
-        },
-        true,
-    ).unwrap();
-    let sr = wifi_driver.get_scan_result().unwrap();
-    for r in sr.iter() {
-        println!("Found wifi {}", r.ssid);
+    if esp_idf_sys::CONFIG_MAIN_TASK_STACK_SIZE < 25000 {
+        error!(
+            "stack too small: {} bail!",
+            esp_idf_sys::CONFIG_MAIN_TASK_STACK_SIZE
+        );
+        return Ok(());
     }
 
-    let adc_config = esp_idf_hal::adc::config::Config {
-        resolution: esp_idf_hal::adc::config::Resolution::Resolution12Bit,
-        calibration: true,
+    log::info!("Startup Rust");
+
+    println!("Board hal init");
+    let mut board: std::sync::MutexGuard<'_, PlantCtrlBoard<'_>> = BOARD_ACCESS.lock().unwrap();
+
+    let time = board.time();
+    let mut cur = match time {
+        Ok(cur) => cur,
+        Err(err) => {
+            log::error!("time error {}", err);
+            DateTime::from_timestamp_millis(0).unwrap()
+        }
     };
-    let mut tank_driver = AdcDriver::new(peripherals.adc2, &adc_config).unwrap();
-    let mut tank_channel: AdcChannelDriver<'_, { attenuation::DB_11 }, Gpio5> =
-    AdcChannelDriver::new(peripherals.pins.gpio5).unwrap();
+    //check if we know the time current > 2020
+    if cur.year() < 2020 {
+            //assume TZ safe times ;)
+            cur = *cur.with_hour(15).get_or_insert(cur);
+        
+    }
+
+    println!("cur is {}", cur);
+
+
+    let mut online_mode: OnlineMode;
+ 
+    println!("attempting to connect wifi");
+    let mut ssid: heapless::String<32> = heapless::String::new();
+    let mut password: heapless::String<64> = heapless::String::new();
+
+    ssid.push_str("C3MA").unwrap();
+    password.push_str("penis").unwrap();
+
+    let ip_address: Option<String>;
+    match board.wifi(ssid, Option::Some(password), 10000) {
+        Ok(ip_info) => {
+            ip_address = Some(ip_info.ip.to_string());
+            online_mode = OnlineMode::Wifi;
+        }
+        Err(_) => {
+            panic!("wifi down");
+        }
+    }
+
+    if online_mode == OnlineMode::Wifi {
+        match board.sntp(1000 * 5) {
+            Ok(new_time) => {
+                cur = new_time;
+                online_mode = OnlineMode::SnTp;
+            }
+            Err(err) => {
+                println!("Sntp error {}", err);
+                online_mode = OnlineMode::SnTp;
+            }
+        }
+    }
+
+    println!("Running logic at utc {}", cur);
+    let europe_time = cur.with_timezone(&Berlin);
+    println!("Running logic at europe/berlin {}", europe_time);
+
+    //do mqtt before config check, as mqtt might configure
+    if online_mode == OnlineMode::SnTp {
+        match board.mqtt() {
+            Ok(_) => {
+                println!("Mqtt connection ready");
+                online_mode = OnlineMode::Online;
+            }
+            Err(err) => {
+                panic!("Could not connect mqtt due to {}", err);
+                            }
+        }
+    }
+
+    if online_mode == OnlineMode::Online {
+        match ip_address {
+            Some(add_some) => {
+                let _ = board.mqtt_publish("/firmware/address", add_some.as_bytes());
+            }
+            None => {
+                let _ = board.mqtt_publish("/firmware/address", "N/A?".as_bytes());
+            }
+        }
+        let _ = board.mqtt_publish(
+            "/firmware/last_online",
+            europe_time.to_rfc3339().as_bytes(),
+        );
+        let _ = board.mqtt_publish("/state", "online".as_bytes());
+
+    }
+    drop(board);
 
     loop {
-        
-        let mut delay = Delay::new_default();
-        
-        
-        in1.set_low().unwrap();
-        in2.set_high().unwrap();
-        for i in 0..50 {
-            delay.delay_ms(100);
-            let value_up = tank_driver.read(&mut tank_channel).unwrap();
-            println!("up {}", value_up);
-        }
-        
-        let value_down = tank_driver.read(&mut tank_channel).unwrap();
-        println!("down {}", value_down);
-        in1.set_low().unwrap();
-        in2.set_low().unwrap();
-        delay.delay_ms(5000);
+        //wait till earth ends
+        Delay::new(1000).delay_ms(1000);
+        let mut lock = BOARD_ACCESS.lock().unwrap();
+        let position = lock.get_position();
+        lock.mqtt_publish("/position", format!("{}", position).as_bytes()).unwrap();
     }
 }
+
+fn main() {
+    let result = safe_main();
+    match result {
+        Ok(_) => {
+            println!("Main app finished, restarting");
+            unsafe { esp_restart() };
+        }
+        Err(err) => {
+            panic!("Failed main {}", err);
+        }
+    }
+}
+//error codes
+//error_reading_config_after_upgrade
+//error_no_config_after_upgrade
+//error_tank_sensor_fault

tuer/gerber/generatePCB.sh

@@ -5,4 +5,7 @@
 MILLSPEED=600
 MILLFEED=200
 PROJECT=tuer
-pcb2gcode --metric --onedrill --back $PROJECT-B_Cu.gbr --cutter-diameter 0.2 --zsafe 5 --zchange 10 --zwork -0.01 --offset 0.02 --mill-feed $MILLFEED --mill-speed $MILLSPEED --drill $PROJECT.drl --zdrill -2.5 --drill-feed $MILLFEED --drill-speed $MILLSPEED --basename $PROJECT
+pcb2gcode --metric --back $PROJECT-B_Cu.gbr --cutter-diameter 0.2 --zsafe 5 --zchange 10 --zwork -0.01 --offset 0.02 --mill-feed $MILLFEED --mill-speed $MILLSPEED --drill $PROJECT.drl --zdrill -2.5 --drill-feed $MILLFEED --drill-speed $MILLSPEED --basename $PROJECT
+# one-drill parameter workaround
+sed ${PROJECT}_drill.ngc -e "s/^T[0-9]$/T1/g" > ${PROJECT}_drillOne.ngc
+mv ${PROJECT}_drillOne.ngc ${PROJECT}_drill.ngc

tuer/tuer.kicad_prl

@@ -1,6 +1,6 @@
 {
   "board": {
-    "active_layer": 31,
+    "active_layer": 36,
     "active_layer_preset": "All Layers",
     "auto_track_width": false,
     "hidden_netclasses": [],

tuer/tuer.kicad_pro

@@ -130,7 +130,7 @@
         "min_track_width": 0.0,
         "min_via_annular_width": 0.1,
         "min_via_diameter": 0.5,
-        "solder_mask_to_copper_clearance": 0.0,
+        "solder_mask_to_copper_clearance": 0.005,
         "use_height_for_length_calcs": true
       },
       "teardrop_options": [