Wordclock/Readme.md

# ESP Wordclock
## Setup

### Initial Setup
Install the firmware on the ESP:
The ESP must be set into the bootloader mode, like [this](https://www.ccc-mannheim.de/wiki/ESP8266#Boot_Modi)

The firmware can be downloaded with the following script:
<pre>
cd os/
./flash.sh ttyUSB0
</pre>

Connect to the ESP via a terminal emulator like screen using a baud rate of 115200. Then format the filesystem and reboot the ESP with the following commands:
<pre>
file.format()
node.restart()
</pre>

Then disconnect the serial terminal and copy the required files to the microcontroller:
<pre>
./tools/initialFlash.sh /dev/ttyUSB0
</pre>

### Upgrade

Determine the IP address of your clock and execute the following script:
<pre>
./tools/remoteFlash.sh IP-Address
</pre>

## Internal Setup
* GPIO2     LEDs
Removed the old project name 2016-04-12 18:24:21 +02:00			`# ESP Wordclock`
First test of word displaying functionality 2016-04-12 18:07:25 +02:00			`## Setup`

Add remote flashing procedure 2019-04-18 16:32:35 +02:00			`### Initial Setup`
Documentation for the first setup updated 2016-06-23 20:45:07 +02:00			`Install the firmware on the ESP:`
			`The ESP must be set into the bootloader mode, like [this](https://www.ccc-mannheim.de/wiki/ESP8266#Boot_Modi)`

			`The firmware can be downloaded with the following script:`
			`<pre>`
			`cd os/`
			`./flash.sh ttyUSB0`
			`</pre>`

clarification of initial flash process 2019-07-26 21:33:48 +02:00			`Connect to the ESP via a terminal emulator like screen using a baud rate of 115200. Then format the filesystem and reboot the ESP with the following commands:`
Documentation for the first setup updated 2016-06-23 20:45:07 +02:00			`<pre>`
			`file.format()`
clarification of initial flash process 2019-07-26 21:33:48 +02:00			`node.restart()`
Documentation for the first setup updated 2016-06-23 20:45:07 +02:00			`</pre>`

			`Then disconnect the serial terminal and copy the required files to the microcontroller:`
First test of word displaying functionality 2016-04-12 18:07:25 +02:00			`<pre>`
Documentation for the first setup updated 2016-06-23 20:45:07 +02:00			`./tools/initialFlash.sh /dev/ttyUSB0`
First test of word displaying functionality 2016-04-12 18:07:25 +02:00			`</pre>`

Add remote flashing procedure 2019-04-18 16:32:35 +02:00			`### Upgrade`

			`Determine the IP address of your clock and execute the following script:`
			`<pre>`
			`./tools/remoteFlash.sh IP-Address`
			`</pre>`

First test of word displaying functionality 2016-04-12 18:07:25 +02:00			`## Internal Setup`
			`* GPIO2 LEDs`