From d910d0b94580f436e3506c0c6f4539e877be934e Mon Sep 17 00:00:00 2001 From: Ollo Date: Sat, 4 Dec 2021 18:46:17 +0100 Subject: [PATCH 1/4] More documentation --- Readme.md | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/Readme.md b/Readme.md index c0d492a..f3afe06 100644 --- a/Readme.md +++ b/Readme.md @@ -55,4 +55,6 @@ The following pins are used: * some wire # Sources -* [https://github.com/amkuipers/witty Witty pinout] \ No newline at end of file +For the Witty board +* [https://github.com/amkuipers/witty Witty pinout] +* [https://arduino.ua/products_pictures/large_AOC361-5.jpg Schematics] From afff1275daacda4b44429f852206866550839b6b Mon Sep 17 00:00:00 2001 From: Ollo Date: Sat, 4 Dec 2021 23:09:07 +0100 Subject: [PATCH 2/4] Documentation --- Readme.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Readme.md b/Readme.md index f3afe06..fd347ad 100644 --- a/Readme.md +++ b/Readme.md @@ -39,10 +39,10 @@ VCC | GND ``` The following pins are used: -* GPIO4 PM1006 particle sensor +* GPIO4 PM1006 particle sensor PIN REST on Vindriktning board * GPIO2 WS2812 stripe out of three LEDs, replacing the orignal LEDs at front * GPIO15 Red LED (optional) -* GPIO12 Green LED (optional) +* GPIO12 Green LED (optional) Used as 3.3V Supply for the I2C sensor * GPIO13 Blue LED (optional) * GPIO13 VCC of I2C (3.3 V) * GPIO14 I2C clock From 1e15d85d6f306abb2193ada2c7aa00d8bce05672 Mon Sep 17 00:00:00 2001 From: Ollo Date: Sat, 4 Dec 2021 23:09:54 +0100 Subject: [PATCH 3/4] Set LED to RED, if no configuration is available --- src/main.cpp | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/src/main.cpp b/src/main.cpp index 34f0faf..3ac5b73 100644 --- a/src/main.cpp +++ b/src/main.cpp @@ -33,10 +33,10 @@ ******************************************************************************/ #define GPIO_WS2812 D4 /**< GPIO2 */ -#define SENSOR_PM1006_RX D2 /**< GPIO4 */ +#define SENSOR_PM1006_RX D2 /**< GPIO4 */ #define SENSOR_PM1006_TX -1 /**< Unused */ #define WITTY_RGB_R D8 /**< GPIO15 */ -#define WITTY_RGB_G D6 /**< GPIO12 */ +#define WITTY_RGB_G D6 /**< GPIO12 Used as 3.3V Power supply for the I2C Sensor */ #define WITTY_RGB_B D7 /**< GPIO13 */ #define PM1006_BIT_RATE 9600 #define PM1006_MQTT_UPDATE 5000 /**< Check the sensor every 10 seconds; New measurement is done every 20seconds by the sensor */ @@ -418,6 +418,8 @@ void setup() strip.show(); digitalWrite(WITTY_RGB_B, HIGH); } else { + digitalWrite(WITTY_RGB_R, HIGH); + digitalWrite(WITTY_RGB_G, LOW); strip.fill(strip.Color(128,0,0)); for (int i=0;i < (PIXEL_COUNT / 2); i++) { strip.setPixelColor(0, strip.Color(0,0,128)); From c39ebc8e544ecf72d61d8dcd7ecd5b1b0c1054d6 Mon Sep 17 00:00:00 2001 From: Ollo Date: Sat, 4 Dec 2021 23:24:30 +0100 Subject: [PATCH 4/4] Serial debugging enabled --- src/main.cpp | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/src/main.cpp b/src/main.cpp index 3ac5b73..600955e 100644 --- a/src/main.cpp +++ b/src/main.cpp @@ -242,7 +242,9 @@ void bmpPublishValues() { gasNode.setProperty(NODE_GAS).send(String((bmx.gas_resistance / 1000.0))); humidityNode.setProperty(NODE_HUMIDITY).send(String(bmx.humidity)); #endif - + log(MQTT_LEVEL_DEBUG, String("Temp" + String(bmx.readTemperature()) + "\tPressure:" + + String(bmx.readPressure() / 100.0F) + "\t Altitude:"+ + String(bmx.readAltitude(SEALEVELPRESSURE_HPA))), MQTT_LOG_I2READ); if ( (rgbTemp.get()) && (!mSomethingReceived) ) { if (bmx.readTemperature() < TEMPBORDER) { strip.setPixelColor(0, strip.Color(0,0,255)); @@ -466,4 +468,5 @@ void log(int level, String message, int statusCode) Homie.getMqttClient().publish(logTopic, 2, false, buffer.c_str()); delete logTopic; } + Homie.getLogger() << (level) << "@" << (statusCode) << " " << (message) << endl; }