/**
 * @file can.cpp
 * 
 * Based on ESP32-TWAI-CAN example
 */

#include <ESP32-TWAI-CAN.hpp>
#include "can.h"

#ifndef CAN_TX
#error CAN Interface not declared
#else

CanFrame rxFrame;

void sendObdFrame(uint8_t obdId) {
	CanFrame obdFrame = { 0 };
	obdFrame.identifier = 0x7DF; // Default OBD2 address;
	obdFrame.extd = 0;
	obdFrame.data_length_code = 8;
	obdFrame.data[0] = 2;
	obdFrame.data[1] = 1;
	obdFrame.data[2] = obdId;
	obdFrame.data[3] = 0xAA;    // Best to use 0xAA (0b10101010) instead of 0
	obdFrame.data[4] = 0xAA;    // CAN works better this way as it needs
	obdFrame.data[5] = 0xAA;    // to avoid bit-stuffing
	obdFrame.data[6] = 0xAA;
	obdFrame.data[7] = 0xAA;
    // Accepts both pointers and references 
    ESP32Can.writeFrame(obdFrame);  // timeout defaults to 1 ms
}

void can_setup() {
    // Setup serial for debbuging.
    Serial.begin(115200);

    // Set pins
	ESP32Can.setPins(CAN_TX, CAN_RX);
	
    // You can set custom size for the queues - those are default
    ESP32Can.setRxQueueSize(5);
	ESP32Can.setTxQueueSize(5);

    // .setSpeed() and .begin() functions require to use TwaiSpeed enum,
    // but you can easily convert it from numerical value using .convertSpeed()
    ESP32Can.setSpeed(ESP32Can.convertSpeed(500));

    // You can also just use .begin()..
    if(ESP32Can.begin()) {
        Serial.println("CAN bus started!");
    } else {
        Serial.println("CAN bus failed!");
    }

    // or override everything in one command;
    // It is also safe to use .begin() without .end() as it calls it internally
    if(ESP32Can.begin(ESP32Can.convertSpeed(500), CAN_TX, CAN_RX, 10, 10)) {
        Serial.println("CAN bus started!");
    } else {
        Serial.println("CAN bus failed!");
    }
}

void can_loop() {
    static uint32_t lastStamp = 0;
    uint32_t currentStamp = millis();
    
    if(currentStamp - lastStamp > 1000) {   // sends OBD2 request every second
        lastStamp = currentStamp;
        sendObdFrame(5); // For coolant temperature
    }

    // You can set custom timeout, default is 1000
    if(ESP32Can.readFrame(rxFrame, 1000)) {
        // Comment out if too many frames
        Serial.printf("Received frame: %03X  \r\n", rxFrame.identifier);
        if(rxFrame.identifier == 0x7E8) {   // Standard OBD2 frame responce ID
            Serial.printf("Collant temp: %3d°C \r\n", rxFrame.data[3] - 40); // Convert to °C
        }
    }
}

#endif