/** * @file ControllerConfiguration.h * @author your name (you@domain.com) * @brief * @version 0.1 * @date 2020-05-30 * * @copyright Copyright (c) 2020 * * \mainpage Configuration of the controller * @{ * Describe the used PINs of the controller * * @subpage Controller * * @subpage Homie * * @subpage Configuration * * There are several modes in the controller * \dot * digraph Operationmode { * ranksep=.75; * poweroff [ label="off" ]; * mode1 [ label="Mode 1 - Sensor only", shape=box, width=2 ]; * mode2 [ label="Mode 2 - Wifi enabled", shape=box ]; * mode3 [ label="Mode 3 - Stay alive", shape=box ]; * mode1 -> mode2 [ label="wakeup reason", fontsize=10 ]; * mode1 -> mode2 [ label="Time duration", fontsize=10 ]; * mode2 -> mode3 [ label="Over the Air Update", fontsize=10 ]; * mode3 -> mode2 [ label="Over the Air Finished", fontsize=10 ]; * mode3 -> mode2 [ label="Mqtt Command", fontsize=10 ]; * mode2 -> mode3 [ label="Mqtt Command", fontsize=10 ]; * poweroff -> mode1 [ label="deep sleep wakeup", fontsize=10 ]; * mode1 -> poweroff [ label="enter deep sleep", fontsize=10 ]; * mode2 -> poweroff [ label="Mqtt queue empty", fontsize=10 ]; * } * \enddot * * Before entering Deep sleep the controller is configured with an wakeup time. * * @} */ #ifndef CONTROLLER_CONFIG_H #define CONTROLLER_CONFIG_H /** \addtogroup GPIO Settings * @{ */ #define SENSOR_PLANT0 GPIO_NUM_32 /**< GPIO 32 (ADC1) */ #define SENSOR_PLANT1 GPIO_NUM_33 /**< GPIO 33 (ADC1) */ #define SENSOR_PLANT2 GPIO_NUM_25 /**< GPIO 25 (ADC2) */ #define SENSOR_PLANT3 GPIO_NUM_26 /**< GPIO 26 (ADC2) */ #define SENSOR_PLANT4 GPIO_NUM_27 /**< GPIO 27 (ADC2) */ #define SENSOR_PLANT5 GPIO_NUM_39 /**< SENSOR_VIN */ #define SENSOR_PLANT6 GPIO_NUM_36 /**< SENSOR_VP */ #ifdef HWREVISION07 #define OUTPUT_PUMP0 GPIO_NUM_17 /**< GPIO 17 */ #define OUTPUT_PUMP1 GPIO_NUM_5 /**< GPIO 5 */ #define OUTPUT_PUMP2 GPIO_NUM_18 /**< GPIO 18 */ #define OUTPUT_PUMP3 GPIO_NUM_19 /**< GPIO 19 */ #define OUTPUT_PUMP4 GPIO_NUM_21 /**< GPIO 21 */ #define OUTPUT_PUMP5 GPIO_NUM_22 /**< GPIO 22 */ #define OUTPUT_PUMP6 GPIO_NUM_23 /**< GPIO 23 */ #else #define OUTPUT_PUMP0 GPIO_NUM_15 /**< GPIO 15 */ #define OUTPUT_PUMP1 GPIO_NUM_5 /**< GPIO 5 */ #define OUTPUT_PUMP2 GPIO_NUM_18 /**< GPIO 18 */ #define OUTPUT_PUMP3 GPIO_NUM_19 /**< GPIO 19 */ #define OUTPUT_PUMP4 GPIO_NUM_21 /**< GPIO 21 */ #define OUTPUT_PUMP5 GPIO_NUM_22 /**< GPIO 22 */ #define OUTPUT_PUMP6 GPIO_NUM_23 /**< GPIO 23 */ #endif #define OUTPUT_ENABLE_PUMP GPIO_NUM_13 /**< GPIO 13 - Enable Pumps */ #ifdef HWREVISION07 #define OUTPUT_ENABLE_SENSOR GPIO_NUM_16 /**< GPIO 16 - Enable Sensors */ #define SENSOR_ONEWIRE GPIO_NUM_2 /** GPIO 02 - Temperatur sensor, Battery and other cool onewire stuff */ #else #define OUTPUT_ENABLE_SENSOR GPIO_NUM_14 /**< GPIO 14 - Enable Sensors */ #define SENSOR_ONEWIRE GPIO_NUM_4 /**< GPIO 12 - Temperatur sensor, Battery and other cool onewire stuff */ #endif #ifdef ANALOG_WATER #define SENSOR_TANK_ANALOG ANALOG_WATER /**< GPIO 34 - analog water sensor (GPIO_NUM_34) */ #else #ifdef HWREVISION07 #else #define SENSOR_TANK_SDA GPIO_NUM_17 /**< GPIO 17 - water sensor SDA */ #define SENSOR_TANK_SCL GPIO_NUM_16 /**< GPIO 16 - water sensor SCL */ #endif #endif #define BUTTON GPIO_NUM_0 /**< GPIO 0 - Fix button of NodeMCU */ #define CUSTOM1_PIN1 GPIO_NUM_34 /** direct gpio */ #define CUSTOM1_PIN3 GPIO_NUM_35 /** direct gpio */ #ifdef HWREVISION07 #define CUSTOM1_PIN5 GPIO_NUM_4 /** mosfet controlled */ #else #define CUSTOM1_PIN5 GPIO_NUM_2 /** mosfet controlled */ #endif #define CUSTOM1_PIN7 GPIO_NUM_12 /** mosfet controlled */ /* @} */ /** \addtogroup Configuration * @{ */ #ifdef FLOWMETER_PIN #define FLOWMETER_PULSES_PER_ML 2.2 #define FIRMWARE_FEATURE1 "Flow" #else #ifdef ANALOG_WATER #define FIRMWARE_FEATURE1 "Water" #else #define FIRMWARE_FEATURE1 "" #endif #endif #ifdef TIMED_LIGHT_PIN #define FIRMWARE_FEATURE2 "Light" #else #define FIRMWARE_FEATURE2 "" #endif #define FIRMWARE_BASENAME "PlantControl" #define FIRMWARE_NAME FIRMWARE_BASENAME FIRMWARE_FEATURE1 FIRMWARE_FEATURE2 #define FIRMWARE_VERSIONNMUMBER "3.010" #ifdef HWREVISION07 #define FIRMWARE_VERSION FIRMWARE_VERSIONNMUMBER " HW0.7" #else #define FIRMWARE_VERSION FIRMWARE_VERSIONNMUMBER " HW0.10b" #endif #define MOIST_SENSOR_MAX_FRQ 5200 // 60kHz (500Hz margin) #define MOIST_SENSOR_MIN_FRQ 500 // 0.5kHz (500Hz margin) #define ANALOG_SENSOR_MAX_MV 1300 //successive approximation of good range #define ANALOG_SENSOR_MIN_MV 100 //successive approximation of good range #ifdef HWREVISION07 #define SOLAR_VOLT_FACTOR (4.0306f) /**< 100k and 33k voltage dividor */ #else #define SOLAR_VOLT_FACTOR (22.0f) #endif #define BATTSENSOR_INDEX_SOLAR 0 #define BATTSENSOR_INDEX_BATTERY 1 #define MQTT_TIMEOUT (1000 * 60) /**< After 10 seconds, MQTT is expected to be connected */ #define ESP_STALE_TIMEOUT (MQTT_TIMEOUT+(700*1000)) #define ESP_ADC_MAX 4095 #define MAX_PLANTS 7 #define SOLAR_CHARGE_MIN_VOLTAGE 7 /**< Sun is rising (morning detected) */ #define SOLAR_CHARGE_MAX_VOLTAGE 9 /**< Sun is shining (noon) */ #define SOLAR_MAX_VOLTAGE_POSSIBLE 100 /**< higher values are treated as not connected sensor */ #define VOLT_MAX_BATT 4.2f #define VOLT_MIN_BATT 3.0f /**< Minimum battery voltage for normal operation */ #define LOWVOLT_SLEEP_FACTOR 3 /**< Factor for nightsleep delay, if the battery drops below minimum (@see VOLT_MIN_BATT) */ #define LOWVOLT_SLEEP_MINIMUM 7200 /**< At low voltage sleep at least for 120 minutes (two hours) */ #define WATER_LEVEL_MINIMUM 500 /**< Minimum Analog value (1023 is the maximum)*/ #define MAX_CONFIG_SETTING_ITEMS 100 /**< Parameter, that can be configured in Homie */ #define MAX_JSON_CONFIG_FILE_SIZE_CUSTOM 2500 #define TEMPERATUR_TIMEOUT 3000 /**< 3 Seconds timeout for the temperatures sensors */ #define WATERSENSOR_TIMEOUT 3000 /**< 3 Seconds timeout for the water distance sensor */ #define WATERSENSOR_CYCLE 10 /**< 5 sensor measurement are performed */ #define DS18B20_RESOLUTION 9 /**< 9bit temperature resolution -> 0.5°C steps */ #define UTC_OFFSET_DE 3600 /* UTC offset in seconds for Germany */ #define UTF_OFFSET_DE_DST 3600 /* offset in seconds if daylight saving time is active */ /* @} */ #endif