/** \addtogroup Homie * @{ * * @file HomieConfiguration.h * @author your name (you@domain.com) * @brief * @version 0.1 * @date 2020-10-16 * * @copyright Copyright (c) 2020 * All Settings, configurable in Homie * */ #ifndef HOMIE_PLANT_CONFIG_H #define HOMIE_PLANT_CONFIG_H #include "HomieTypes.h" #define MAX_PLANTS 7 /** * @name Homie Attributes * generated Information * @{ **/ #define NUMBER_TYPE "Number" /**< numberic information, published or read in Homie */ /** * @name Temperatur Node * @{ **/ #define TEMPERATURE_NAME "Temperature" #define TEMPERATURE_UNIT "°C" #define TEMPERATUR_SENSOR_LIPO "lipo" /**< Homie node: temperatur, setting: lipo temperatur (or close to it) */ #define TEMPERATUR_SENSOR_CHIP "chip" /**< Homie node: temperatur, setting: battery chip */ #define TEMPERATUR_SENSOR_WATER "water" /**< Homie node: temperatur, setting: water temperatur */ /** @} * * @name Plant Nodes * @{ */ HomieNode plant0("plant0", "Plant 0", "Plant"); /**< dynamic Homie information for first plant */ HomieNode plant1("plant1", "Plant 1", "Plant"); /**< dynamic Homie information for second plant */ HomieNode plant2("plant2", "Plant 2", "Plant"); /**< dynamic Homie information for third plant */ HomieNode plant3("plant3", "Plant 3", "Plant"); /**< dynamic Homie information for fourth plant */ HomieNode plant4("plant4", "Plant 4", "Plant"); /**< dynamic Homie information for fivth plant */ HomieNode plant5("plant5", "Plant 5", "Plant"); /**< dynamic Homie information for sixth plant */ HomieNode plant6("plant6", "Plant 6", "Plant"); /**< dynamic Homie information for seventh plant */ #if defined(TIMED_LIGHT_PIN) HomieNode timedLightNode("timedLight", "TimedLight", "Status"); #endif // TIMED_LIGHT_PIN HomieNode sensorLipo("lipo", "Battery Status", "Lipo"); HomieNode sensorSolar("solar", "Solar Status", "Solarpanel"); HomieNode sensorWater("water", "WaterSensor", "Water"); HomieNode sensorTemp("temperature", "Temperature", "temperature"); HomieNode stayAlive("stay", "alive", "alive"); /**< Necessary for Mqtt Active Command */ /** * @} */ /** * @name Settings * General settings for the controller * @{ */ HomieSetting deepSleepTime("sleep", "time in seconds to sleep"); HomieSetting deepSleepNightTime("nightsleep", "time in seconds to sleep (0 uses same setting: deepsleep at night, too)"); HomieSetting pumpIneffectiveWarning("pumpConsecutiveWarn", "if the pump was triggered this amount directly after each cooldown, without resolving dryness, warn"); HomieSetting waterLevelMax("tankmax", "distance (mm) at maximum water level"); HomieSetting waterLevelMin("tankmin", "distance (mm) at minimum water level (pumps still covered)"); HomieSetting waterLevelWarn("tankwarn", "warn (mm) if below this water level %"); HomieSetting waterLevelVol("tankVolume", "(ml) between minimum and maximum"); HomieSetting lipoSensorAddr("lipoDSAddr", "1wire address for lipo temperature sensor"); HomieSetting waterSensorAddr("tankDSAddr", "1wire address for water temperature sensor"); HomieSetting ntpServer("ntpServer", "NTP server (pool.ntp.org as default)"); #if defined(TIMED_LIGHT_PIN) HomieSetting timedLightVoltageCutoff("LightVoltageCutoff", "voltage at wich to disable light"); HomieSetting timedLightStart("LightStart", "hour to start light"); HomieSetting timedLightEnd("LightEnd", "hour to end light"); HomieSetting timedLightOnlyWhenDark("LightOnlyDark", "only enable light, if solar is low"); #endif // TIMED_LIGHT_PIN /** * @} */ /** * @name Plant specific ones * Setting for one plant * @{ **/ #define GENERATE_PLANT(plant, strplant) \ HomieSetting mSensorDry##plant = HomieSetting("dry" strplant, "Plant " strplant "- Moist sensor dry %"); \ HomieSetting mPumpAllowedHourRangeStart##plant = HomieSetting("hourstart" strplant, "Plant" strplant " - Range pump allowed hour start (0-23)"); \ HomieSetting mPumpAllowedHourRangeEnd##plant = HomieSetting("hourend" strplant, "Plant" strplant " - Range pump allowed hour end (0-23)"); \ HomieSetting mPumpOnlyWhenLowLight##plant = HomieSetting("lowLight" strplant, "Plant" strplant " - Enable the Pump only, when there is no sunlight"); \ HomieSetting mPumpCooldownInMinutes##plant = HomieSetting("delay" strplant, "Plant" strplant " - How long to wait until the pump is activated again (minutes)"); \ HomieSetting pPumpDuration##plant = HomieSetting("pumpDuration" strplant, "Plant" strplant " - time seconds to water when pump is active"); \ HomieSetting pPumpMl##plant = HomieSetting("pumpAmount" strplant, "Plant" strplant " - ml (if using flowmeter) to water when pump is active"); \ HomieSetting pPowerLevel##plant = HomieSetting("powerLevel" strplant, "Plant" strplant " - pwm duty cycle in percent"); \ PlantSettings_t mSetting##plant = {&mSensorDry##plant, &mPumpAllowedHourRangeStart##plant, &mPumpAllowedHourRangeEnd##plant, &mPumpOnlyWhenLowLight##plant, &mPumpCooldownInMinutes##plant, &pPumpDuration##plant, &pPowerLevel##plant, &pPumpMl##plant}; \ /**< Generate all settings for one plant \ * \ * Feature to start pumping only at morning: @link{SOLAR_CHARGE_MIN_VOLTAGE} and @link{SOLAR_CHARGE_MAX_VOLTAGE} \ */ /** * @} */ GENERATE_PLANT(0, "0"); /**< Homie settings for first plant */ GENERATE_PLANT(1, "1"); /**< Homie settings for second Plant */ GENERATE_PLANT(2, "2"); /**< Homie settings for third plant */ GENERATE_PLANT(3, "3"); /**< Homie settings for fourth plant */ GENERATE_PLANT(4, "4"); /**< Homie settings for fifth plant */ GENERATE_PLANT(5, "5"); /**< Homie settings for sixth plant */ GENERATE_PLANT(6, "6"); /**< Homie settings for seventh plant */ #endif /* HOMIE_PLANT_CONFIG_H @} */