/** * @file ControllerConfiguration.h * @author your name (you@domain.com) * @brief * @version 0.1 * @date 2020-05-30 * * @copyright Copyright (c) 2020 * Describe the used PINs of the controller */ #ifndef CONTROLLER_CONFIG_H #define CONTROLLER_CONFIG_H #define FIRMWARE_VERSION "0.9.5" #define ADC_TO_VOLT(adc) ((adc) * 3.3 ) / 4095) #define ADC_TO_VOLT_WITH_MULTI(adc, multi) (((adc) * 3.3 * (multi)) / 4095) #define SOLAR_VOLT(adc) ADC_TO_VOLT_WITH_MULTI(adc, 4.0306) /**< 100k and 33k voltage dividor */ #define ADC_5V_TO_3V3(adc) ADC_TO_VOLT_WITH_MULTI(adc, 1.7) /**< 33k and 47k8 voltage dividor */ #define MS_TO_S 1000 #define SENSOR_LIPO 34 /**< GPIO 34 (ADC1) */ #define SENSOR_SOLAR 35 /**< GPIO 35 (ADC1) */ #define SENSOR_PLANT1 32 /**< GPIO 32 (ADC1) */ #define SENSOR_PLANT2 33 /**< GPIO 33 (ADC1) */ #define SENSOR_PLANT3 25 /**< GPIO 25 (ADC2) */ #define SENSOR_PLANT4 26 /**< GPIO 26 (ADC2) */ #define SENSOR_PLANT5 27 /**< GPIO 27 (ADC2) */ #define SENSOR_PLANT6 14 /**< GPIO 14 (ADC2) */ #define OUTPUT_PUMP1 5 /**< GPIO 5 */ #define OUTPUT_PUMP2 18 /**< GPIO 18 */ #define OUTPUT_PUMP3 19 /**< GPIO 19 */ #define OUTPUT_PUMP4 21 /**< GPIO 21 */ #define OUTPUT_PUMP5 22 /**< GPIO 22 */ #define OUTPUT_PUMP6 23 /**< GPIO 23 */ #define OUTPUT_SENSOR 4 /**< GPIO 4 */ #define INPUT_WATER_LOW 2 /**< GPIO 2 */ #define INPUT_WATER_EMPTY 15 /**< GPIO 15 */ #define INPUT_WATER_OVERFLOW 12 /**< GPIO 12 */ #define SENSOR_DS18B20 13 /**< GPIO 13 */ #define BUTTON 0 /**< GPIO 0 */ #define MIN_TIME_RUNNING 10UL /**< Amount of seconds the controller must stay awoken */ #define MAX_PLANTS 3 #define EMPTY_LIPO_MULTIPL 3 /**< Multiplier to increase time for sleeping when lipo is empty */ #define MINIMUM_LIPO_VOLT 3.3f /**< Minimum voltage of the Lipo, that must be present */ #define MINIMUM_SOLAR_VOLT 4.0f /**< Minimum voltage of the sun, to detect daylight */ #define HC_SR04 /**< Ultrasonic distance sensor to measure water level */ #endif