Added third parameter: MQTT server

.gitignore

@@ -4,4 +4,3 @@
 .vscode/launch.json
 .vscode/ipch
 todo.txt
-*.ini

README.md

@@ -25,17 +25,3 @@ stored in folder **/client**
 go to **/client**
 * cargo build
 * cargo run
-
-### Deamon
-Requires ''systemd''
-
-Install by creating a link to this project
-```
-/etc/systemd/system# ln -s /home/c3ma/led-board/client/ledBoard.service ledBoard.service
-systemctl daemon-reload
-systemctl enable ledBoard.service
-```
-Start deamon with
-```
-systemctl start ledBoard.service
-```

client/bin/Cargo.toml

@@ -21,10 +21,5 @@ serde = "1.0"
 serde_derive = "1.0"
 serde_json = "1.0"
 # end of web stuff
-ping = "0.4.1"
 paho-mqtt = "0.13.2"
-async-trait = "0.1"
+ping = "0.4.1"
-# Ini File parser
-rust-ini = "0.21"
-lazy_static = "1.4"
-futures = "0.3"

client/bin/src/config.rs

@@ -1,78 +0,0 @@
-// config.rs
-
-/// @file
-/// @brief Configuration settings for the application.
-///
-/// This file defines the configuration settings that are used throughout the application.
-
-use lazy_static::lazy_static;
-use std::sync::Mutex;
-
-use ini::Ini;
-use std::path::Path;
-
-const DEFAULT_REFRESH_INTERVAL: u32 = 50;
-
-
-// Define a struct to hold the INI configuration
-#[derive(Debug)]
-pub struct Config {
-    pub mqttPrefix: String,
-    pub mqttIPAddress: String,
-    pub panelIPAddress: String,
-    pub refreshInterval: u32
-}
-
-impl Config {
-    // Constructor for Config
-    pub fn new(mqtt_prefix: &str, mqtt_ip_address: &str, panel_ip_address: &str, interval: u32) -> Self {
-        Config {
-            mqttPrefix: mqtt_prefix.to_string(),
-            mqttIPAddress: mqtt_ip_address.to_string(),
-            panelIPAddress: panel_ip_address.to_string(),
-            refreshInterval: interval
-        }
-    }
-
-    pub fn newDefault() -> Self {
-        Config {
-            mqttPrefix: "".to_string(),
-            mqttIPAddress: "".to_string(),
-            panelIPAddress: "".to_string(),
-            refreshInterval: DEFAULT_REFRESH_INTERVAL
-        }
-    }
-}
-
-// Function to read the INI file
-pub fn read_ini_file(filename: String) -> Config {
-    
-    let mut config = Config::newDefault();
-    let i = Ini::load_from_file(filename).unwrap();
-    for (sec, prop) in i.iter() {
-        
-        for (k, v) in prop.iter()
-        {
-            println!("{:?} {}:{}", sec, k, v);
-            if (sec.is_some()) && (sec.unwrap() == "mqtt")
-            {
-                if k == "path"
-                {
-                    config.mqttPrefix = v.trim().to_string();
-                }
-                else if k == "server"
-                {
-                    config.mqttIPAddress = v.trim().to_string();
-                }
-            }
-            else if (sec.is_some()) && (sec.unwrap() == "panel")
-            {
-                if k == "ip"
-                {
-                    config.panelIPAddress = v.trim().to_string();
-                }
-            }
-        }
-    }
-    return config;
-}

client/bin/src/main.rs

@@ -1,13 +1,10 @@
 use std::{time::Duration, fmt::format};
-use std::sync::{RwLock, Arc};
-use async_trait::async_trait;
-use paho_mqtt::{CreateOptionsBuilder, ConnectOptionsBuilder, Client ,Message as MqttMessage};
 use str;
 use bit::BitIndex;
 use chrono_tz::Europe::Berlin;
 use chrono::{DateTime, NaiveDateTime, Utc, Timelike};
 use std::time::{SystemTime, UNIX_EPOCH};
-use openweathermap::{forecast::Weather, Receiver};
+use openweathermap::forecast::Weather;
 use substring::Substring;
 use tinybmp::Bmp;
 use core::time;
@@ -21,23 +18,16 @@ use embedded_graphics::{
 
 use std::net::UdpSocket;
 use std::{env, thread};
-use std::path::Path;
 use std::io;
 use std::process::ExitCode;
+
 use openweathermap::forecast::Forecast;
 use straba::NextDeparture;
+use paho_mqtt::{Client, CreateOptionsBuilder, ConnectOptionsBuilder, Message};
 // This declaration will look for a file named `straba.rs` and will
 // insert its contents inside a module named `straba` under this scope
 mod straba;
 
-use std::sync::Mutex;
-use lazy_static::lazy_static;
-use futures::executor::block_on;
-// Load INI-File handling module
-mod config;
-use config::Config;
-use crate::config::read_ini_file;
-
 const IMAGE_SIZE_BYTE: usize = (IMAGE_WIDTH_BYTE * IMAGE_HEIGHT) as usize; /* one byte contains 8 LEDs, one in each bit */
 const IMAGE_WIDTH: u32 = 5 * 32;
 const IMAGE_WIDTH_BYTE: u32 = IMAGE_WIDTH / 8; /* one byte contains 8 LEDs, one in each bit */
@@ -47,37 +37,6 @@ const IMAGE_HEIGHT_BYTE: u32 = 40;
 const IMAGE_LENGTH: usize = (IMAGE_WIDTH_BYTE * IMAGE_HEIGHT_BYTE) as usize;
 const PACKAGE_LENGTH: usize = (IMAGE_LENGTH + 1) as usize;
 
-/// @struct MqttClient
-/// @brief A struct to hold application configuration settings.
-///
-/// The `MqttClient` struct contains various configuration parameters that control the behavior of the application.
-pub struct MqttClient {
-    /// MQTT client option
-    pub mqtt_client: Option<paho_mqtt::Client>,
-}
-
-impl MqttClient {
-    /// Creates a new instance of MqttClient with mqtt_client initialized to None.
-    pub fn new() -> Self {
-        MqttClient { 
-            mqtt_client: None,
-        }
-    }
-
-    /// Setter for mqtt_client
-    pub fn set_mqtt_client(&mut self, client: Option<paho_mqtt::Client>) {
-        self.mqtt_client = client;
-    }
-
-    /// Getter for mqtt_client
-    pub fn get_mqtt_client(&self) -> &Option<paho_mqtt::Client> {
-        &self.mqtt_client
-    }
-}
-
-lazy_static! {
-    static ref MQTTCLIENT: Mutex<MqttClient> = Mutex::new(MqttClient::new());
-}
 
 struct UdpDisplay {
     image: [u8; IMAGE_SIZE_BYTE],
@@ -285,13 +244,6 @@ fn render_clock(display: &mut UdpDisplay){
     .unwrap();
 }
 
-fn render_mqtt_message(display: &mut UdpDisplay, mqtt_message: String){
-    let text_style = MonoTextStyle::new(&FONT_6X10, BinaryColor::On);
-    Text::new(&mqtt_message, Point::new((1) as i32, 37), text_style)
-    .draw(display)
-    .unwrap();
-}
-
 fn render_strab_partial(display: &mut UdpDisplay, station: &String, diff: i64, height: i32) {
     let text_style = MonoTextStyle::new(&FONT_6X10, BinaryColor::On);
     let mut diff_str = format!("{}min", (diff / 60));
@@ -325,15 +277,13 @@ fn render_strab_partial(display: &mut UdpDisplay, station: &String, diff: i64, h
 }
 
 fn render_strab(display: &mut UdpDisplay, straba_res: &NextDeparture) {
-    render_strab_partial(display, &straba_res.outbound_station, straba_res.outbound_diff, 17);
+    render_strab_partial(display, &straba_res.outbound_station, straba_res.outbound_diff, 15);
-    render_strab_partial(display, &straba_res.inbound_station, straba_res.inbound_diff, 27);
+    render_strab_partial(display, &straba_res.inbound_station, straba_res.inbound_diff, 25);
 }
-/////////////////////////////////////////////////////////////////////////////
 
 fn send_package(ipaddress: String, 
                 data: &Option<Result<Forecast, String>>,
-                straba_res: &NextDeparture,
+                straba_res: &NextDeparture) {
-                mqtt_message: Option<String>) {
     let mut package: [u8; PACKAGE_LENGTH] = [0; PACKAGE_LENGTH];
 
     // Brightness
@@ -351,10 +301,6 @@ fn send_package(ipaddress: String,
         render_strab(&mut display, straba_res);
     }
 
-    if mqtt_message.is_some() {
-        render_mqtt_message(&mut display, mqtt_message.unwrap());       
-    }
-
     render_clock(&mut display);
 
     package[1..PACKAGE_LENGTH].copy_from_slice(&display.image);
@@ -372,11 +318,6 @@ LEDboardClient <ip address>"
     );
     println!("one argument necessary!");
     println!("<ip address>");
-    println!("second argument is optional:");
-    println!("<ip of mqtt server>");
-    println!("");
-    println!("Config mode");
-    println!("--config <file.ini>");
 }
 
 fn check_connection(ipaddress: String) -> bool {
@@ -417,7 +358,7 @@ fn publish_to_mqtt(client: &Client, data: &Option<Result<Forecast, String>>, str
     } else {
         "no_data".to_string()
     };
-    let msg = MqttMessage::new("ledboard/forecast", payload, 1);
+    let msg = Message::new("ledboard/forecast", payload, 1);
     if let Err(e) = client.publish(msg) {
         eprintln!("Error publishing MQTT message: {}", e);
     }
@@ -427,248 +368,59 @@ fn publish_to_mqtt(client: &Client, data: &Option<Result<Forecast, String>>, str
                 straba_res.outbound_diff / 60,
                 straba_res.inbound_diff / 60)
     };
-    let ptmsg = MqttMessage::new("ledboard/public_transportation", payloadPT, 1);
+    let ptmsg = Message::new("ledboard/public_transportation", payloadPT, 1);
     if let Err(e) = client.publish(ptmsg) {
         eprintln!("Error publishing MQTT message: {}", e);
     }
 }
 
-struct Message {
+fn main() -> ExitCode {
-    string: Option<String>
+    let args: Vec<String> = env::args().collect();
+    match args.len() {
+        // no arguments passed
+        1 => {
+            // show a help message
+            help();
+            return ExitCode::SUCCESS;
         }
+        // one argument passed
+        2 => {
+            let ip = &args[1];
 
-// Lazy static to load the config file content
+            // Read broker URL from environment
-lazy_static! {
+            let broker = match std::env::var("MQTT_BROKER") {
-    pub static ref GlobalConfiguration: Mutex<Config> = Mutex::new({
+                Ok(val) if !val.is_empty() => val,
-        Config::newDefault()
+                _ => {
-     });
+                    eprintln!("Environment variable MQTT_BROKER not set or empty, MQTT disabled");
+                    String::new()
                 }
+            };
 
+            return main_function(ip, Some(broker))
 
-
+        }
-/// Asynchronously publishes a message to the specified topic.
+         // two argument passed
-/// 
+         3 => {
-/// @author Gwen2.5
+            let ip = &args[1];
-/// 
+            let mqtt = &args[2];
-/// # Arguments
+            return main_function(   ip,
-/// * `topic` - The MQTT topic to which the message will be published.
+                                    Some(mqtt.to_string())
-/// * `message` - The message to be published.
+                                );
-/// 
+        }
-/// # Returns
+        // all the other cases
-/// True if the message was successfully published, false otherwise.
+        _ => {
-fn publish_message(topic: &str, message: &str) {
+            // show a help message
-    let msg = MqttMessage::new(topic, message, 0);
+            help();
-
+            return ExitCode::SUCCESS;
-    let mqtt_client =  <std::option::Option<Client> as Clone>::clone(&(MQTTCLIENT.lock().unwrap().get_mqtt_client())).unwrap();
-    // Publish the message and ensure it completes without error
-   let result =  mqtt_client.publish(msg);
-    match result {
-        Ok(_) => (),
-        Err(error) => {
-            println!("Error publishing {error:?}");
         }
     }
 }
 
-fn main_function(parameter1: String, parameter2: Option<String>) -> ExitCode {
+fn main_function(ip: &String, mqttBroker: Option<String>) -> ExitCode {
-
+    let mut device_online: bool = check_connection(ip.to_string());
-    // Read configuration file
-    if  (parameter1 == "--config") && (parameter2.is_some())
-    {
-        let configOrMqttAddress: String = parameter2.unwrap();
-        if Path::new(&configOrMqttAddress).exists()
-        {
-            let mut gc = GlobalConfiguration.lock().unwrap();
-            let c = read_ini_file(configOrMqttAddress);
-            
-            //update configuration
-            gc.mqttIPAddress = c.mqttIPAddress;
-            gc.panelIPAddress = c.panelIPAddress;
-            gc.mqttPrefix = c.mqttPrefix;
-            println!("Read INI {:} @ {:}", gc.mqttPrefix, gc.mqttIPAddress);
-        }
-        else
-        {
-            /* Panel and MQTT Configured*/
-            println!("INI file not found");
-            return ExitCode::FAILURE;
-        }
-    }
-    else
-    {
-        let mut gc = GlobalConfiguration.lock().unwrap();   
-        gc.panelIPAddress = parameter1;
-        gc.mqttIPAddress = parameter2.unwrap();
-    }
-
-    let mut device_online = false;
-    if GlobalConfiguration.lock().unwrap().panelIPAddress.len() > 0
-    {
-        device_online = check_connection(GlobalConfiguration.lock().unwrap().panelIPAddress.clone());
-        if !device_online {
-            println!("{:} not online", &GlobalConfiguration.lock().unwrap().panelIPAddress);
-            return ExitCode::FAILURE;
-        }
-    }
-
-    let mut gmc = MQTTCLIENT.lock().unwrap();
-    let mqtt_message: Arc<Mutex<Message>> = Arc::new(Mutex::new(Message{ string: None }));
-
-    if GlobalConfiguration.lock().is_ok() && (GlobalConfiguration.lock().unwrap().mqttIPAddress.len() > 0)
-    {
-        // Define the set of options for the create.
-        // Use an ID for a persistent session.
-        let create_opts = paho_mqtt::CreateOptionsBuilder::new()
-        .server_uri(GlobalConfiguration.lock().unwrap().mqttIPAddress.clone())
-        .client_id("ledboard")
-        .finalize();
-        // Create a client.
-        let local_mqtt = paho_mqtt::Client::new(create_opts).unwrap();
-        
-        println!("MQTT | Connecting to {:} MQTT server...", GlobalConfiguration.lock().unwrap().mqttIPAddress);
-        
-        let lwt = paho_mqtt::Message::new(&format!("{}/lwt", GlobalConfiguration.lock().unwrap().mqttPrefix), "lost connection", 1);
-
-        // The connect options. Defaults to an MQTT v3.x connection.
-        let conn_opts = paho_mqtt::ConnectOptionsBuilder::new()
-            .keep_alive_interval(Duration::from_secs(20))
-            .will_message(lwt)
-            .finalize();
-
-        // Make the connection to the broker
-        println!("MQTT | Connecting to the MQTT server...");
-        let result = local_mqtt.connect(conn_opts);
-
-        match result {
-            Ok(_) => {
-                println!("MQTT | Server connected");
-            },
-            Err(error) => {
-                println!("MQTT | Server connecting {error:?}");
-            },
-        }
-
-        // Subscribe to the desired topic(s).
-        local_mqtt.subscribe("room/ledboard", paho_mqtt::QOS_0);
-
-        // Starts the client receiving messages
-        let rx_queue = local_mqtt.start_consuming();
-
-        // Attach a closure to the client to receive callback
-        // on incoming messages.
-        let mqtt_message_for_callback = mqtt_message.clone();
-        
-        // Create a thread that stays pending over incoming messages.
-        let handle = thread::spawn(move || {
-            for mqttmsg in rx_queue.iter() {
-                if let Some(mqttmsg) = mqttmsg {
-                    let topic = mqttmsg.topic();
-                    let payload_str = mqttmsg.payload_str();
-
-                    //println!("MQTT | {} - {}", topic, payload_str);
-                    let mut lock = mqtt_message_for_callback.lock().unwrap();
-                    lock.string = Some(payload_str.to_string());
-                    println!("Received: -> {}", mqttmsg.payload_str());
-                } else {
-                    println!("Unsubscribe: connection closed");
-                    break;
-                }
-            }
-        });
-        // Define the set of options for the connection
-
-        // move local instance to global scope
-        gmc.set_mqtt_client(Some(local_mqtt));
-    }
-
-    let receiver = openweathermap::init_forecast("Mannheim",
-    "metric",
-    "de",
-    "978882ab9dd05e7122ff2b0aef2d3e55",
-    60,1);
-
-    let mut last_data = Option::None;
-    
-    // Test Webcrawler for public transportataion
-    let mut straba_res = straba::fetch_data(Some(true));
-    println!("{:?} {:?}s", straba_res.outbound_station, straba_res.outbound_diff);
-    println!("{:?} {:?}s", straba_res.inbound_station , straba_res.inbound_diff);
-
-    if GlobalConfiguration.lock().is_ok() && (GlobalConfiguration.lock().unwrap().panelIPAddress.len() > 0)
-    {
-        // Render start
-        send_package(GlobalConfiguration.lock().unwrap().panelIPAddress.clone(), &last_data, &straba_res, Some("MQTT: room/ledboard".to_string()));
-    }
-
-    loop {
-        let st_now = SystemTime::now();
-        let seconds = st_now.duration_since(UNIX_EPOCH).unwrap().as_secs();
-        let delay = time::Duration::from_millis(500);
-        thread::sleep(delay);
-        // Only request, if the device is present
-        if device_online == true {
-            let answer = openweathermap::update_forecast(&receiver);
-            match answer {
-                Some(_) => {
-                    last_data = answer;
-                }
-                None => {
-    
-                }
-            }
-        }
-
-        if (straba_res.request_time + (GlobalConfiguration.lock().unwrap().refreshInterval as i64)) < seconds as i64 {
-            if GlobalConfiguration.lock().is_ok() && GlobalConfiguration.lock().unwrap().mqttIPAddress.len() > 0
-            {
-                device_online = check_connection(GlobalConfiguration.lock().unwrap().mqttIPAddress.clone());
-            }
-
-            if GlobalConfiguration.lock().is_ok() && GlobalConfiguration.lock().unwrap().mqttPrefix.len() > 0
-            {
-                //FIXME if mqtt_client.is_some()
-                fun_publishinfoviamqtt(&straba_res);
-            }
-            
-            // request once a minute new data
-            straba_res = straba::fetch_data(None);
-            println!("Update {:?} {:?}s", straba_res.outbound_station, straba_res.outbound_diff);
-            println!("Update {:?} {:?}s", straba_res.inbound_station , straba_res.inbound_diff);
-        }
-
-        let lock = mqtt_message.lock().unwrap();
-        let mqtt_message: Option<String>;
-        if lock.string.is_some() {
-            mqtt_message = lock.string.clone();
-        } else {
-            mqtt_message = None;
-        }
-
-        if (GlobalConfiguration.lock().is_ok()) && (GlobalConfiguration.lock().unwrap().mqttIPAddress.len() > 0) && (device_online == true) {
-            // Render new image
-            send_package(GlobalConfiguration.lock().unwrap().mqttIPAddress.clone(), &last_data, &straba_res, mqtt_message);
-        }
-        // Handle MQTT messages
-        
-    }
-}
-
-fn fun_publishinfoviamqtt(straba_res: &NextDeparture) {
-    let topic_in_station: String = format!("{}{}", GlobalConfiguration.lock().unwrap().mqttPrefix, "/inbound/station");
-    let station_name: String = format!("{}", straba_res.inbound_station);
-    // Execute async publish synchronously
-    let _ = publish_message(topic_in_station.as_str(), station_name.as_str());
-    println!("MQTT published {:?} = {:?}s", topic_in_station, straba_res.outbound_station);
-}
-
-fn main_function2(ip: String) -> ExitCode
-{
-
-
-    let mut device_online = check_connection(ip.to_string());
     if !device_online {
         println!("{} not online", ip);
-       // return ExitCode::FAILURE;
+        return ExitCode::FAILURE;
     }
 
             
@@ -688,19 +440,11 @@ fn main_function2(ip: String) -> ExitCode
 
     // Initialize MQTT client from MQTT_BROKER env var (else disabled)
     let mqtt_client: Option<Client> = {
-        // Read broker URL from environment
+        if mqttBroker.is_none() {
-        let broker = match std::env::var("MQTT_BROKER") {
-            Ok(val) if !val.is_empty() => val,
-            _ => {
-                eprintln!("Environment variable MQTT_BROKER not set or empty, MQTT disabled");
-                String::new()
-            }
-        };
-        if broker.is_empty() {
             None
-        } else {
+        } else if mqttBroker.is_some() {
             let create_opts = CreateOptionsBuilder::new()
-                .server_uri(&broker)
+                .server_uri(mqttBroker.clone().unwrap())
                 .client_id("ledboard_client")
                 .finalize();
             match Client::new(create_opts) {
@@ -712,21 +456,23 @@ fn main_function2(ip: String) -> ExitCode
                     match cli.connect(conn_opts) {
                         Ok(_) => Some(cli),
                         Err(e) => {
-                            eprintln!("Failed to connect to MQTT broker '{}': {}", broker, e);
+                            eprintln!("Failed to connect to MQTT broker '{}': {}", mqttBroker.clone().unwrap(), e);
                             None
                         }
                     }
                 }
                 Err(e) => {
-                    eprintln!("Failed to create MQTT client for '{}': {}", broker, e);
+                    eprintln!("Failed to create MQTT client for '{}': {}", mqttBroker.clone().unwrap(), e);
                     None
                 }
             }
+        } else {
+            None
         }
     };
 
     // Render start
-    send_package(ip.to_string(), &last_data, &straba_res, None);
+    send_package(ip.to_string(), &last_data, &straba_res);
     loop {
         let st_now = SystemTime::now();
         let seconds = st_now.duration_since(UNIX_EPOCH).unwrap().as_secs();
@@ -757,7 +503,7 @@ fn main_function2(ip: String) -> ExitCode
 
         if device_online == true {
             // Render new image
-            send_package(ip.to_string(), &last_data, &straba_res, None);
+            send_package(ip.to_string(), &last_data, &straba_res);
             // Publish data to MQTT
        }
          if let Some(ref client) = mqtt_client {
@@ -766,35 +512,3 @@ fn main_function2(ip: String) -> ExitCode
 
     }
 }
-
-fn main() -> ExitCode {
-    let args: Vec<String> = env::args().collect();
-    match args.len() {
-        // no arguments passed
-        1 => {
-            // show a help message
-            help();
-            return ExitCode::SUCCESS;
-        }
-        // one argument passed
-        2 => {
-            let ip = &args[1];
-            // Only one parameter uses the logic, generated in o4mini-llm
-            return main_function2(ip.to_string());
-        }
-        // two argument passed
-        3 => {
-            let ip = &args[1];
-            let mqtt = &args[2];
-            return main_function(   ip.to_string(),
-                                    Some(mqtt.to_string())
-                                );
-        }
-        // all the other cases
-        _ => {
-            // show a help message
-            help();
-            return ExitCode::SUCCESS;
-        }
-    }
-}

client/bin/src/straba.rs

@@ -1,6 +1,6 @@
 use chrono::DateTime;
 use std::time::{SystemTime, UNIX_EPOCH};
-use chrono::Local;
+
 use serde::Deserialize;
 
 const STATION_URL:&str = "https://www.rnv-online.de/rest/departure/2494";
@@ -79,11 +79,10 @@ pub struct NextDeparture {
 }
 
 pub fn fetch_data(debug_print : Option<bool>) -> NextDeparture {
-    let date = Local::now();
+
     let st_now = SystemTime::now();
     let seconds = st_now.duration_since(UNIX_EPOCH).unwrap().as_secs();
-    let timeString = date.format("%Y-%m-%d %H:%M:%S");
+    let url = &format!("{}?datetime={}", STATION_URL, seconds);
-    let url = &format!("{}?datetime={}", STATION_URL, timeString);
     let result = reqwest::blocking::get(url);
     
     let mut return_value = NextDeparture {
@@ -119,24 +118,10 @@ pub fn fetch_data(debug_print : Option<bool>) -> NextDeparture {
         return return_value;
     }
 
-    if debug_print.is_some() && debug_print.unwrap() == true {
-        println!("----------- Seconds {:} {:} requesting ... -----------", seconds, timeString);
-    }
     // parse JSON result.. search of both directions
     let json = body.unwrap();
-    
-    if debug_print.is_some() && debug_print.unwrap() == true {
-        println!("Requesting {:}", json.graph_ql.response.name);
-        println!("Elements {:}", json.graph_ql.response.journeys.elements.len() );
-        //println!("------------------------- %< ----------------------------");
-        //println!("{}", &raw_text);
-        //println!("------------------------- %< ----------------------------");
-    }
-
     for el in json.graph_ql.response.journeys.elements {
-
         if debug_print.is_some() && debug_print.unwrap() == true {
-            println!("Requesting {:}", json.graph_ql.response.name);
             println!("Line {:}", el.line.line_group.label);  
         }
         for stop in el.stops {
@@ -155,8 +140,6 @@ pub fn fetch_data(debug_print : Option<bool>) -> NextDeparture {
                     if diff <  return_value.outbound_diff {
                         return_value.outbound_station = stop.destination_label;
                         return_value.outbound_diff = diff;
-                    } else if debug_print.is_some() && debug_print.unwrap() == true {
-                        println!("Unkown diff Stop   {:} {:} (in {:} seconds)", stop.destination_label, txt_departure, diff );
                     }
                 } else if stop.destination_label.contains("Hochschule") ||
                             stop.destination_label.contains("Hauptbahnhof") ||
@@ -164,19 +147,13 @@ pub fn fetch_data(debug_print : Option<bool>) -> NextDeparture {
                     if diff <  return_value.inbound_diff {
                         return_value.inbound_station = stop.destination_label;
                         return_value.inbound_diff = diff;
-                    } else if debug_print.is_some() && debug_print.unwrap() == true {
-                        println!("Unkown diff Stop   {:} {:} (in {:} seconds)", stop.destination_label, txt_departure, diff );
                     }
-                } else if debug_print.is_some() && debug_print.unwrap() == true {
-                    println!("Unkown Stop   {:} {:} (in {:} seconds)", stop.destination_label, txt_departure, diff );
                 }
             } else {
                 println!("Planned {:} {:?}", stop.destination_label, stop.planned_departure.iso_string)
             }
         }
     }
-    if debug_print.is_some() && debug_print.unwrap() == true {
+
-        println!("----------- end of straba.rs -----------");
-    }
     return_value
 }

client/ledBoard.service

@@ -1,17 +0,0 @@
-[Unit]
-Description=Log uptime in scoreboard
-DefaultDependencies=no
-
-[Service]
-Type=simple
-Restart=on-failure
-User=c3ma
-
-# Specify users home as working directory
-WorkingDirectory=/home/c3ma/
-# Define wrapper to update and start project
-ExecStart=/usr/bin/bash <project home>/client/ledboard.sh
-TimeoutStartSec=0
-
-[Install]
-WantedBy=network.target

client/ledboard.sh

@@ -1,12 +0,0 @@
-#!/bin/bash
-# Wrapper script to update project and build project
-#
-#Set target IP address
-IP=
-# Path to this project
-HOSTCLIENT=
-cd $HOSTCLIENT
-/usr/bin/pkill LEDboardClient
-git pull
-cargo build
-$HOSTCLIENT/target/debug/LEDboardClient $IP