#pragma once

#include <Arduino.h>

enum class DeviceRole : uint8_t {
  Sender = 0,
  Receiver = 1
};

enum class PayloadType : uint8_t {
  MeterData = 0,
  TestCode = 1,
  TimeSync = 2
};

constexpr uint8_t PROTOCOL_VERSION = 1;

// Pin definitions
constexpr uint8_t PIN_LORA_SCK = 5;
constexpr uint8_t PIN_LORA_MISO = 19;
constexpr uint8_t PIN_LORA_MOSI = 27;
constexpr uint8_t PIN_LORA_NSS = 18;
constexpr uint8_t PIN_LORA_RST = 23;
constexpr uint8_t PIN_LORA_DIO0 = 26;

constexpr uint8_t PIN_OLED_SDA = 21;
constexpr uint8_t PIN_OLED_SCL = 22;
constexpr uint8_t PIN_OLED_RST = 16;
constexpr uint8_t OLED_I2C_ADDR = 0x3C;
constexpr uint8_t OLED_WIDTH = 128;
constexpr uint8_t OLED_HEIGHT = 64;

constexpr uint8_t PIN_BAT_ADC = 35;

constexpr uint8_t PIN_ROLE = 13;
constexpr uint8_t PIN_OLED_CTRL = 14;

constexpr uint8_t PIN_METER_RX = 34;

// LoRa settings
#ifndef LORA_FREQUENCY_HZ
#define LORA_FREQUENCY_HZ 433E6
#endif
constexpr long LORA_FREQUENCY = LORA_FREQUENCY_HZ;
constexpr uint8_t LORA_SPREADING_FACTOR = 12;
constexpr long LORA_BANDWIDTH = 125E3;
constexpr uint8_t LORA_CODING_RATE = 5;
constexpr uint8_t LORA_SYNC_WORD = 0x34;

// Timing
constexpr uint32_t SENDER_WAKE_INTERVAL_SEC = 30;
constexpr uint32_t TIME_SYNC_INTERVAL_SEC = 60;
constexpr uint32_t OLED_PAGE_INTERVAL_MS = 10000;
constexpr uint32_t OLED_AUTO_OFF_MS = 10UL * 60UL * 1000UL;

constexpr uint8_t NUM_SENDERS = 1;
inline constexpr uint16_t EXPECTED_SENDER_IDS[NUM_SENDERS] = {
  //0xF19C //433mhz sender
  0x7EB4 //868mhz sender
};

DeviceRole detect_role();