Add SD history UI and pin remap

- Add SD history chart + download listing to web UI - Use HSPI for SD and fix SD pin mapping - Swap role/OLED control pins and update role detection - Update README pin mapping and SD/history docs
2026-02-02 01:43:54 +01:00
parent d32ae30014
commit b5477262ea
7 changed files with 484 additions and 15 deletions
--- a/README.md
+++ b/README.md
@@ -21,17 +21,23 @@ Variants:
  - SCL: GPIO22
  - RST: **not used** (SSD1306 init uses `-1` reset pin)
  - I2C address: 0x3C
+- microSD (on-board)
+  - CS: GPIO13
+  - MOSI: GPIO15
+  - SCK: GPIO14
+  - MISO: GPIO2
 - I2C RTC (DS3231)
  - SDA: GPIO21
  - SCL: GPIO22
  - I2C address: 0x68
 - Battery ADC: GPIO35 (via on-board divider)
- **Role select**: GPIO13 (INPUT_PULLDOWN)
-  - LOW = Sender
-  - HIGH = Receiver
- **OLED control**: GPIO14 (INPUT_PULLDOWN)
+- **Role select**: GPIO14 (INPUT_PULLDOWN, sampled at boot)
+  - HIGH = Sender
+  - LOW/floating = Receiver
+- **OLED control**: GPIO13 (INPUT_PULLDOWN, sender only)
  - HIGH = force OLED on
  - LOW = allow auto-off after timeout
+  - Not used on receiver (OLED always on)
 - Smart meter UART RX: GPIO34 (input-only, always connected)

 ### Notes on GPIOs
@@ -257,6 +263,8 @@ inline constexpr uint16_t EXPECTED_SENDER_IDS[NUM_SENDERS] = { 0xF19C };
  - `/sender/<device_id>`: per-sender details
 - Sender IDs on `/` are clickable (open sender page in a new tab).
 - In STA mode, the UI is also available via the board’s IP/hostname on your WiFi network.
+- Main page shows SD card file listing (downloadable).
+- Sender page includes a history chart (power) with configurable range/resolution/mode.

 ## MQTT
 - Topic: `smartmeter/<deviceId>/state`
@@ -293,6 +301,8 @@ Key timing settings in `include/config.h`:
 - `SERIAL_DEBUG_MODE` / `SERIAL_DEBUG_DUMP_JSON`
 - `LORA_SEND_BYPASS` (debug only)
 - `ENABLE_SD_LOGGING` / `PIN_SD_CS`
+ - `SD_HISTORY_MAX_DAYS` / `SD_HISTORY_MIN_RES_MIN`
+ - `SD_HISTORY_MAX_BINS` / `SD_HISTORY_TIME_BUDGET_MS`

 ## Limits & Known Constraints
 - **Compression**: MeterData uses lightweight RLE (good for JSON but not optimal).
@@ -309,6 +319,9 @@ Optional CSV logging to microSD (FAT32) when `ENABLE_SD_LOGGING = true`.
 - Columns:
  `ts_utc,p_w,p1_w,p2_w,p3_w,e_kwh,bat_v,bat_pct,rssi,snr,err_m,err_d,err_tx,err_last`
 - `err_last` is written as text (`meter`, `decode`, `loratx`) only on the last sample of a batch that reports an error.
+- Files are downloadable from the main UI page.
+- History chart on sender page stream-parses CSVs and bins data in the background.
+- SD uses the on-board microSD SPI pins (CS=13, MOSI=15, SCK=14, MISO=2).

 ## Files & Modules
 - `include/config.h`, `src/config.cpp`: pins, radio settings, sender IDs
@@ -331,7 +344,7 @@ Optional CSV logging to microSD (FAT32) when `ENABLE_SD_LOGGING = true`.
 1. Set role jumper on GPIO13:
   - LOW: sender
   - HIGH: receiver
-2. OLED control on GPIO14:
+2. OLED control on GPIO13:
   - HIGH: always on
   - LOW: auto-off after 10 minutes
 3. Build and upload:
--- a/include/config.h
+++ b/include/config.h
@@ -39,8 +39,8 @@ constexpr uint8_t OLED_HEIGHT = 64;

 constexpr uint8_t PIN_BAT_ADC = 35;

-constexpr uint8_t PIN_ROLE = 13;
-constexpr uint8_t PIN_OLED_CTRL = 14;
+constexpr uint8_t PIN_ROLE = 14;
+constexpr uint8_t PIN_OLED_CTRL = 13;

 constexpr uint8_t PIN_METER_RX = 34;

@@ -73,11 +73,18 @@ constexpr uint8_t BATCH_QUEUE_DEPTH = 10;
 constexpr BatchRetryPolicy BATCH_RETRY_POLICY = BatchRetryPolicy::Keep;
 constexpr uint32_t WATCHDOG_TIMEOUT_SEC = 120;
 constexpr bool ENABLE_HA_DISCOVERY = true;
-constexpr bool SERIAL_DEBUG_MODE = false;
+constexpr bool SERIAL_DEBUG_MODE = true;
 constexpr bool SERIAL_DEBUG_DUMP_JSON = false;
 constexpr bool LORA_SEND_BYPASS = false;
-constexpr bool ENABLE_SD_LOGGING = false;
-constexpr uint8_t PIN_SD_CS = 25;
+constexpr bool ENABLE_SD_LOGGING = true;
+constexpr uint8_t PIN_SD_CS = 13;
+constexpr uint8_t PIN_SD_MOSI = 15;
+constexpr uint8_t PIN_SD_MISO = 2;
+constexpr uint8_t PIN_SD_SCK = 14;
+constexpr uint16_t SD_HISTORY_MAX_DAYS = 30;
+constexpr uint16_t SD_HISTORY_MIN_RES_MIN = 1;
+constexpr uint16_t SD_HISTORY_MAX_BINS = 4000;
+constexpr uint16_t SD_HISTORY_TIME_BUDGET_MS = 10;
 constexpr const char *AP_SSID_PREFIX = "DD3-Bridge-";
 constexpr const char *AP_PASSWORD = "changeme123";

--- a/src/config.cpp
+++ b/src/config.cpp
@@ -2,5 +2,5 @@

 DeviceRole detect_role() {
  pinMode(PIN_ROLE, INPUT_PULLDOWN);
-  return digitalRead(PIN_ROLE) == HIGH ? DeviceRole::Receiver : DeviceRole::Sender;
+  return digitalRead(PIN_ROLE) == HIGH ? DeviceRole::Sender : DeviceRole::Receiver;
 }
--- a/src/display_ui.cpp
+++ b/src/display_ui.cpp
@@ -69,7 +69,9 @@ void display_power_down() {
 }

 void display_init() {
+  if (g_role == DeviceRole::Sender) {
    pinMode(PIN_OLED_CTRL, INPUT_PULLDOWN);
+  }
  Wire.begin(PIN_OLED_SDA, PIN_OLED_SCL);
  Wire.setClock(100000);
  g_display_ready = display.begin(SSD1306_SWITCHCAPVCC, OLED_I2C_ADDR);
@@ -373,7 +375,10 @@ void display_tick() {
    }
    return;
  }
-  bool ctrl_high = digitalRead(PIN_OLED_CTRL) == HIGH;
+  bool ctrl_high = false;
+  if (g_role == DeviceRole::Sender) {
+    ctrl_high = digitalRead(PIN_OLED_CTRL) == HIGH;
+  }

  bool in_boot_window = (millis() - g_boot_ms) < OLED_AUTO_OFF_MS;
  if (g_role == DeviceRole::Receiver) {
--- a/src/main.cpp
+++ b/src/main.cpp
@@ -603,6 +603,7 @@ void setup() {
  g_boot_ms = millis();
  g_role = detect_role();
  init_device_ids(g_short_id, g_device_id, sizeof(g_device_id));
+  display_set_role(g_role);
  if (SERIAL_DEBUG_MODE) {
 #ifdef ARDUINO_ARCH_ESP32
    serial_debug_printf("boot: reset_reason=%d", static_cast<int>(esp_reset_reason()));
@@ -615,7 +616,6 @@ void setup() {
  display_init();
  time_rtc_init();
  time_try_load_from_rtc();
-  display_set_role(g_role);
  display_set_self_ids(g_short_id, g_device_id);

  if (g_role == DeviceRole::Sender) {
--- a/src/sd_logger.cpp
+++ b/src/sd_logger.cpp
@@ -5,6 +5,7 @@
 #include <time.h>

 static bool g_sd_ready = false;
+static SPIClass *g_sd_spi = nullptr;

 static const char *fault_text(FaultType fault) {
  switch (fault) {
@@ -43,7 +44,20 @@ void sd_logger_init() {
    g_sd_ready = false;
    return;
  }
-  g_sd_ready = SD.begin(PIN_SD_CS);
+  if (!g_sd_spi) {
+    g_sd_spi = new SPIClass(HSPI);
+  }
+  g_sd_spi->begin(PIN_SD_SCK, PIN_SD_MISO, PIN_SD_MOSI, PIN_SD_CS);
+  g_sd_ready = SD.begin(PIN_SD_CS, *g_sd_spi);
+  if (SERIAL_DEBUG_MODE) {
+    if (g_sd_ready) {
+      uint8_t type = SD.cardType();
+      uint64_t size = SD.cardSize();
+      Serial.printf("sd: ok type=%u size=%llu\n", static_cast<unsigned>(type), static_cast<unsigned long long>(size));
+    } else {
+      Serial.println("sd: init failed");
+    }
+  }
 }

 bool sd_logger_is_ready() {
--- a/src/web_server.cpp
+++ b/src/web_server.cpp
@@ -2,6 +2,13 @@
 #include <WebServer.h>
 #include "wifi_manager.h"
 #include "config.h"
+#include "sd_logger.h"
+#include "time_manager.h"
+#include <SD.h>
+#include <WiFi.h>
+#include <time.h>
+#include <new>
+#include <stdlib.h>

 static WebServer server(80);
 static const SenderStatus *g_statuses = nullptr;
@@ -13,6 +20,37 @@ static const FaultType *g_sender_last_errors = nullptr;
 static MeterData g_last_batch[NUM_SENDERS][METER_BATCH_MAX_SAMPLES];
 static uint8_t g_last_batch_count[NUM_SENDERS] = {};

+struct HistoryBin {
+  uint32_t ts;
+  float value;
+  uint32_t count;
+};
+
+enum class HistoryMode : uint8_t {
+  Avg = 0,
+  Max = 1
+};
+
+struct HistoryJob {
+  bool active;
+  bool done;
+  bool error;
+  String error_msg;
+  String device_id;
+  HistoryMode mode;
+  uint32_t start_ts;
+  uint32_t end_ts;
+  uint32_t res_sec;
+  uint32_t bins_count;
+  uint32_t bins_filled;
+  uint16_t day_index;
+  File file;
+  HistoryBin *bins;
+};
+
+static HistoryJob g_history = {};
+static constexpr size_t SD_LIST_MAX_FILES = 200;
+
 static String html_header(const String &title) {
  String h = "<!DOCTYPE html><html><head><meta charset='utf-8'><meta name='viewport' content='width=device-width,initial-scale=1'>";
  h += "<title>" + title + "</title></head><body>";
@@ -40,6 +78,143 @@ static String format_faults(uint8_t idx) {
  return s;
 }

+static void history_reset() {
+  if (g_history.file) {
+    g_history.file.close();
+  }
+  if (g_history.bins) {
+    delete[] g_history.bins;
+  }
+  g_history = {};
+}
+
+static String history_date_from_epoch(uint32_t ts_utc) {
+  time_t t = static_cast<time_t>(ts_utc);
+  struct tm tm_utc;
+  gmtime_r(&t, &tm_utc);
+  char buf[16];
+  snprintf(buf, sizeof(buf), "%04d-%02d-%02d", tm_utc.tm_year + 1900, tm_utc.tm_mon + 1, tm_utc.tm_mday);
+  return String(buf);
+}
+
+static bool history_open_next_file() {
+  if (!g_history.active || g_history.done || g_history.error) {
+    return false;
+  }
+  if (g_history.file) {
+    g_history.file.close();
+  }
+  uint32_t day_ts = g_history.start_ts + static_cast<uint32_t>(g_history.day_index) * 86400UL;
+  if (day_ts > g_history.end_ts) {
+    g_history.done = true;
+    return false;
+  }
+  String path = String("/dd3/") + g_history.device_id + "/" + history_date_from_epoch(day_ts) + ".csv";
+  g_history.file = SD.open(path.c_str(), FILE_READ);
+  g_history.day_index++;
+  return true;
+}
+
+static bool history_parse_line(const char *line, uint32_t &ts_out, float &p_out) {
+  if (!line || line[0] < '0' || line[0] > '9') {
+    return false;
+  }
+  const char *comma = strchr(line, ',');
+  if (!comma) {
+    return false;
+  }
+  char ts_buf[16];
+  size_t ts_len = static_cast<size_t>(comma - line);
+  if (ts_len >= sizeof(ts_buf)) {
+    return false;
+  }
+  memcpy(ts_buf, line, ts_len);
+  ts_buf[ts_len] = '\0';
+  char *end = nullptr;
+  uint32_t ts = static_cast<uint32_t>(strtoul(ts_buf, &end, 10));
+  if (end == ts_buf) {
+    return false;
+  }
+  const char *p_start = comma + 1;
+  const char *p_end = strchr(p_start, ',');
+  char p_buf[16];
+  size_t p_len = p_end ? static_cast<size_t>(p_end - p_start) : strlen(p_start);
+  if (p_len >= sizeof(p_buf)) {
+    return false;
+  }
+  memcpy(p_buf, p_start, p_len);
+  p_buf[p_len] = '\0';
+  char *endp = nullptr;
+  float p = strtof(p_buf, &endp);
+  if (endp == p_buf) {
+    return false;
+  }
+  ts_out = ts;
+  p_out = p;
+  return true;
+}
+
+static void history_tick() {
+  if (!g_history.active || g_history.done || g_history.error) {
+    return;
+  }
+  if (!sd_logger_is_ready()) {
+    g_history.error = true;
+    g_history.error_msg = "sd_not_ready";
+    return;
+  }
+
+  uint32_t start_ms = millis();
+  while (millis() - start_ms < SD_HISTORY_TIME_BUDGET_MS) {
+    if (!g_history.file) {
+      if (!history_open_next_file()) {
+        if (g_history.done) {
+          g_history.active = false;
+        }
+        return;
+      }
+    }
+    if (!g_history.file.available()) {
+      g_history.file.close();
+      continue;
+    }
+
+    char line[160];
+    size_t n = g_history.file.readBytesUntil('\n', line, sizeof(line) - 1);
+    line[n] = '\0';
+    if (n == 0) {
+      continue;
+    }
+    uint32_t ts = 0;
+    float p = 0.0f;
+    if (!history_parse_line(line, ts, p)) {
+      continue;
+    }
+    if (ts < g_history.start_ts || ts > g_history.end_ts) {
+      continue;
+    }
+    uint32_t idx = (ts - g_history.start_ts) / g_history.res_sec;
+    if (idx >= g_history.bins_count) {
+      continue;
+    }
+    HistoryBin &bin = g_history.bins[idx];
+    if (bin.count == 0) {
+      bin.ts = g_history.start_ts + idx * g_history.res_sec;
+      bin.value = p;
+      bin.count = 1;
+      g_history.bins_filled++;
+    } else if (g_history.mode == HistoryMode::Avg) {
+      bin.value += p;
+      bin.count++;
+    } else {
+      if (p > bin.value) {
+        bin.value = p;
+      }
+      bin.count++;
+    }
+  }
+}
+
 static String render_sender_block(const SenderStatus &status) {
  String s;
  s += "<div style='margin-bottom:10px;padding:6px;border:1px solid #ccc'>";
@@ -76,6 +251,42 @@ static String render_sender_block(const SenderStatus &status) {
  return s;
 }

+static void append_sd_listing(String &html, const String &dir_path, uint8_t depth, size_t &count) {
+  if (count >= SD_LIST_MAX_FILES || depth > 4) {
+    return;
+  }
+  File dir = SD.open(dir_path.c_str());
+  if (!dir || !dir.isDirectory()) {
+    return;
+  }
+  File entry = dir.openNextFile();
+  while (entry && count < SD_LIST_MAX_FILES) {
+    String name = entry.name();
+    String full_path = name;
+    if (!full_path.startsWith(dir_path)) {
+      if (!dir_path.endsWith("/")) {
+        full_path = dir_path + "/" + name;
+      } else {
+        full_path = dir_path + name;
+      }
+    }
+    if (entry.isDirectory()) {
+      html += "<li><strong>" + full_path + "/</strong></li>";
+      append_sd_listing(html, full_path, depth + 1, count);
+    } else {
+      String href = full_path;
+      if (!href.startsWith("/")) {
+        href = "/" + href;
+      }
+      html += "<li><a href='/sd/download?path=" + href + "' target='_blank' rel='noopener noreferrer'>" + full_path + "</a>";
+      html += " (" + String(entry.size()) + " bytes)</li>";
+      count++;
+    }
+    entry = dir.openNextFile();
+  }
+  dir.close();
+}
+
 static void handle_root() {
  String html = html_header("DD3 Bridge Status");
  html += g_is_ap ? "<p>Mode: AP</p>" : "<p>Mode: STA</p>";
@@ -86,6 +297,18 @@ static void handle_root() {
    }
  }

+  if (sd_logger_is_ready()) {
+    html += "<h3>SD Files</h3><ul>";
+    size_t count = 0;
+    append_sd_listing(html, "/dd3", 0, count);
+    if (count >= SD_LIST_MAX_FILES) {
+      html += "<li>Listing truncated...</li>";
+    }
+    html += "</ul>";
+  } else {
+    html += "<p>SD: not ready</p>";
+  }
+
  html += "<p><a href='/wifi'>Configure WiFi/MQTT/NTP</a></p>";
  html += "<p><a href='/manual'>Manual</a></p>";
  html += html_footer();
@@ -143,6 +366,63 @@ static void handle_sender() {
    if (device_id.equalsIgnoreCase(g_statuses[i].last_data.device_id)) {
      String html = html_header("Sender " + device_id);
      html += render_sender_block(g_statuses[i]);
+      html += "<h3>History (Power)</h3>";
+      html += "<div>";
+      html += "Days: <input id='hist_days' type='number' min='1' max='" + String(SD_HISTORY_MAX_DAYS) + "' value='7' style='width:60px'> ";
+      html += "Res(min): <input id='hist_res' type='number' min='" + String(SD_HISTORY_MIN_RES_MIN) + "' value='5' style='width:60px'> ";
+      html += "<select id='hist_mode'><option value='avg'>avg</option><option value='max'>max</option></select> ";
+      html += "<button onclick='drawHistory()'>Draw</button>";
+      html += "<div id='hist_status' style='font-size:12px;margin-top:4px;color:#666;'></div>";
+      html += "<canvas id='hist_canvas' width='320' height='140' style='width:100%;max-width:520px;border:1px solid #ccc;margin-top:6px;'></canvas>";
+      html += "</div>";
+      html += "<script>";
+      html += "let histTimer=null;";
+      html += "function histStatus(msg){document.getElementById('hist_status').textContent=msg;}";
+      html += "function drawHistory(){";
+      html += "const days=document.getElementById('hist_days').value;";
+      html += "const res=document.getElementById('hist_res').value;";
+      html += "const mode=document.getElementById('hist_mode').value;";
+      html += "histStatus('Starting...');";
+      html += "fetch(`/history/start?device_id=" + device_id + "&days=${days}&res=${res}&mode=${mode}`)";
+      html += ".then(r=>r.json()).then(j=>{";
+      html += "if(!j.ok){histStatus('Error: '+(j.error||'failed'));return;}";
+      html += "if(histTimer){clearInterval(histTimer);}";
+      html += "histTimer=setInterval(()=>fetchHistory(),1000);";
+      html += "fetchHistory();";
+      html += "});";
+      html += "}";
+      html += "function fetchHistory(){";
+      html += "fetch(`/history/data?device_id=" + device_id + "`).then(r=>r.json()).then(j=>{";
+      html += "if(!j.ready){histStatus(j.error?('Error: '+j.error):('Processing... '+(j.progress||0)+'%'));return;}";
+      html += "if(histTimer){clearInterval(histTimer);histTimer=null;}";
+      html += "renderChart(j.series);";
+      html += "histStatus('Done');";
+      html += "});";
+      html += "}";
+      html += "function renderChart(series){";
+      html += "const canvas=document.getElementById('hist_canvas');";
+      html += "const w=canvas.clientWidth;const h=canvas.clientHeight;";
+      html += "canvas.width=w;canvas.height=h;";
+      html += "const ctx=canvas.getContext('2d');";
+      html += "ctx.clearRect(0,0,w,h);";
+      html += "if(!series||series.length===0){ctx.fillText('No data',10,20);return;}";
+      html += "let min=Infinity,max=-Infinity;";
+      html += "for(const p of series){if(p[1]===null)continue; if(p[1]<min)min=p[1]; if(p[1]>max)max=p[1];}";
+      html += "if(!isFinite(min)||!isFinite(max)){ctx.fillText('No data',10,20);return;}";
+      html += "if(min===max){min=0;}";
+      html += "ctx.strokeStyle='#333';ctx.lineWidth=1;ctx.beginPath();";
+      html += "let first=true;";
+      html += "for(let i=0;i<series.length;i++){";
+      html += "const v=series[i][1];";
+      html += "if(v===null)continue;";
+      html += "const x=(i/(series.length-1))* (w-2) + 1;";
+      html += "const y=h-2-((v-min)/(max-min))*(h-4);";
+      html += "if(first){ctx.moveTo(x,y);first=false;} else {ctx.lineTo(x,y);} }";
+      html += "ctx.stroke();";
+      html += "ctx.fillStyle='#666';ctx.fillText(min.toFixed(0)+'W',4,h-4);";
+      html += "ctx.fillText(max.toFixed(0)+'W',4,12);";
+      html += "}";
+      html += "</script>";
      if (g_last_batch_count[i] > 0) {
        html += "<h3>Last batch (" + String(g_last_batch_count[i]) + " samples)</h3>";
        html += "<table border='1' cellspacing='0' cellpadding='3'>";
@@ -193,6 +473,149 @@ static void handle_manual() {
  server.send(200, "text/html", html);
 }

+static void handle_history_start() {
+  if (!sd_logger_is_ready()) {
+    server.send(200, "application/json", "{\"ok\":false,\"error\":\"sd_not_ready\"}");
+    return;
+  }
+  if (!time_is_synced()) {
+    server.send(200, "application/json", "{\"ok\":false,\"error\":\"time_not_synced\"}");
+    return;
+  }
+  String device_id = server.arg("device_id");
+  uint16_t days = static_cast<uint16_t>(server.arg("days").toInt());
+  uint16_t res_min = static_cast<uint16_t>(server.arg("res").toInt());
+  String mode_str = server.arg("mode");
+  if (device_id.length() == 0 || days == 0 || res_min == 0) {
+    server.send(200, "application/json", "{\"ok\":false,\"error\":\"bad_params\"}");
+    return;
+  }
+  if (days > SD_HISTORY_MAX_DAYS) {
+    days = SD_HISTORY_MAX_DAYS;
+  }
+  if (res_min < SD_HISTORY_MIN_RES_MIN) {
+    res_min = SD_HISTORY_MIN_RES_MIN;
+  }
+  uint32_t bins = (static_cast<uint32_t>(days) * 24UL * 60UL) / res_min;
+  if (bins == 0 || bins > SD_HISTORY_MAX_BINS) {
+    String resp = String("{\"ok\":false,\"error\":\"too_many_bins\",\"max_bins\":") + SD_HISTORY_MAX_BINS + "}";
+    server.send(200, "application/json", resp);
+    return;
+  }
+
+  history_reset();
+  g_history.active = true;
+  g_history.done = false;
+  g_history.error = false;
+  g_history.device_id = device_id;
+  g_history.mode = (mode_str == "max") ? HistoryMode::Max : HistoryMode::Avg;
+  g_history.res_sec = static_cast<uint32_t>(res_min) * 60UL;
+  g_history.bins_count = bins;
+  g_history.day_index = 0;
+  g_history.bins = new (std::nothrow) HistoryBin[bins];
+  if (!g_history.bins) {
+    g_history.error = true;
+    g_history.error_msg = "oom";
+    server.send(200, "application/json", "{\"ok\":false,\"error\":\"oom\"}");
+    return;
+  }
+  for (uint32_t i = 0; i < bins; ++i) {
+    g_history.bins[i] = {};
+  }
+  g_history.end_ts = time_get_utc();
+  uint32_t span = static_cast<uint32_t>(days) * 86400UL;
+  g_history.start_ts = g_history.end_ts > span ? (g_history.end_ts - span) : 0;
+  if (g_history.res_sec > 0) {
+    g_history.start_ts = (g_history.start_ts / g_history.res_sec) * g_history.res_sec;
+  }
+
+  String resp = String("{\"ok\":true,\"bins\":") + bins + "}";
+  server.send(200, "application/json", resp);
+}
+
+static void handle_history_data() {
+  String device_id = server.arg("device_id");
+  if (!g_history.bins || device_id.length() == 0 || device_id != g_history.device_id) {
+    server.send(200, "application/json", "{\"ready\":false,\"error\":\"no_job\"}");
+    return;
+  }
+  if (g_history.error) {
+    String resp = String("{\"ready\":false,\"error\":\"") + g_history.error_msg + "\"}";
+    server.send(200, "application/json", resp);
+    return;
+  }
+  if (g_history.active && !g_history.done) {
+    uint32_t progress = g_history.bins_count == 0 ? 0 : (g_history.bins_filled * 100UL / g_history.bins_count);
+    String resp = String("{\"ready\":false,\"progress\":") + progress + "}";
+    server.send(200, "application/json", resp);
+    return;
+  }
+
+  server.setContentLength(CONTENT_LENGTH_UNKNOWN);
+  server.send(200, "application/json", "");
+  server.sendContent("{\"ready\":true,\"series\":[");
+  bool first = true;
+  for (uint32_t i = 0; i < g_history.bins_count; ++i) {
+    const HistoryBin &bin = g_history.bins[i];
+    if (!first) {
+      server.sendContent(",");
+    }
+    first = false;
+    float value = NAN;
+    if (bin.count > 0) {
+      value = (g_history.mode == HistoryMode::Avg) ? (bin.value / static_cast<float>(bin.count)) : bin.value;
+    }
+    if (bin.count == 0) {
+      server.sendContent(String("[") + bin.ts + ",null]");
+    } else {
+      server.sendContent(String("[") + bin.ts + "," + String(value, 2) + "]");
+    }
+  }
+  server.sendContent("]}");
+}
+
+static void handle_sd_download() {
+  if (!sd_logger_is_ready()) {
+    server.send(404, "text/plain", "SD not ready");
+    return;
+  }
+  String path = server.arg("path");
+  if (path.startsWith("dd3/")) {
+    path = "/" + path;
+  }
+  if (!path.startsWith("/dd3/")) {
+    server.send(400, "text/plain", "Invalid path");
+    return;
+  }
+  File f = SD.open(path.c_str(), FILE_READ);
+  if (!f) {
+    server.send(404, "text/plain", "Not found");
+    return;
+  }
+  size_t size = f.size();
+  String filename = path.substring(path.lastIndexOf('/') + 1);
+  server.sendHeader("Content-Disposition", "attachment; filename=\"" + filename + "\"");
+  server.setContentLength(size);
+  const char *content_type = "application/octet-stream";
+  if (filename.endsWith(".csv")) {
+    content_type = "text/csv";
+  } else if (filename.endsWith(".txt")) {
+    content_type = "text/plain";
+  }
+  server.send(200, content_type, "");
+  WiFiClient client = server.client();
+  uint8_t buf[512];
+  while (f.available()) {
+    size_t n = f.read(buf, sizeof(buf));
+    if (n == 0) {
+      break;
+    }
+    client.write(buf, n);
+    delay(0);
+  }
+  f.close();
+}
+
 void web_server_set_config(const WifiMqttConfig &config) {
  g_config = config;
 }
@@ -222,6 +645,9 @@ void web_server_begin_ap(const SenderStatus *statuses, uint8_t count) {

  server.on("/", handle_root);
  server.on("/manual", handle_manual);
+  server.on("/history/start", handle_history_start);
+  server.on("/history/data", handle_history_data);
+  server.on("/sd/download", handle_sd_download);
  server.on("/wifi", HTTP_GET, handle_wifi_get);
  server.on("/wifi", HTTP_POST, handle_wifi_post);
  server.on("/sender/", handle_sender);
@@ -243,6 +669,9 @@ void web_server_begin_sta(const SenderStatus *statuses, uint8_t count) {
  server.on("/", handle_root);
  server.on("/manual", handle_manual);
  server.on("/sender/", handle_sender);
+  server.on("/history/start", handle_history_start);
+  server.on("/history/data", handle_history_data);
+  server.on("/sd/download", handle_sd_download);
  server.on("/wifi", HTTP_GET, handle_wifi_get);
  server.on("/wifi", HTTP_POST, handle_wifi_post);
  server.onNotFound([]() {
@@ -256,5 +685,6 @@ void web_server_begin_sta(const SenderStatus *statuses, uint8_t count) {
 }

 void web_server_loop() {
+  history_tick();
  server.handleClient();
 }